Payment term - 90 days from document date on 15th of the month

Helllo,
Can anybody please tell me how to configure following payment term?
90 days from document date on 15th of the month i.e. as follows:
u2022     Document date = 03.01 => Due date = 15.04 (90 days completes on 03.04)
u2022     Document date = 15.01 => Due date = 15.04 (90 days completes on 15.04)
u2022     Document date = 27.02 => Due date = 15.06 (90 days completes on 28.05)
u2022     Document date = 18.03 => Due date = 15.07 (90 days completes on 16.06)
Regards,
CHetna Pant

Dear,
Define no 'fixed day' and 'additional months'. Go to payment terms section and enter 90 in 'No. of days'

Similar Messages

Payment terms 45 days from month end

Hi,
Any one has configured the payment terms above. If yes, pelase let us know how to do the same.
Thanks
Aravind

Hi,
Resolved.

Terms of payment(75 days net from the invoice date.payme25 th of the month)

Hi
I need to configure the below payment term
"75 days net from the invoice date, payment 25 th of the month"
Please suggest me.
Regards
Prasad

"75 days net from the invoice date, payment 25 th of the month"
you cann try this
Tcode OBB8
Default baseline date = Document date
Payment terms
Term 1:- Fixed date= 25
Additional months=2

How to see (net due date + payment term's days) in fbl5n as a date

hi experts.
i need some informations about fbl5n fields
i can see net due date and i can see terms of payment fields in the fbl5n but if the invoice has a payment term (30 day additional etc) i want to see (net due date + payment term's extra days) . for example if the net due date is 01.06.2011 and payment term is extra 20 days , how can i see 21.06.2011 in fbl5n or any other sceens?
Edited by: Burak Akdasli on Jun 22, 2011 3:43 PM

Hi
I understand from ur question whats the billing date?
If this is ur question, you can fetch it from sales order>item>billing tab.
The logic u had mentioned is confusing be more specifc as to what scenario u are trying.
Reward if it helped
Chandru

How to create payment term '90 days after Bill of lading + 7 days after...'

Hi all,
I was wondering how you can create this special payment term:
"90 days after Bill of Lading, the calculation of the Net Due Date has to start 7 days after the invoice date".
90 days after Bill of Lading is no problem to create.
The start of the Net Due Date 7 days after the invoice date is a more tricky one.
The transaction code for Payment terms is OBB8.
In the Display View: "Terms of Payment": Details, you can find that the document date is the baseline date (and the start date).
Do someone know how you can change the document date into invoice date ? And if so, how can you add 7 days after the invoice date?
Thanks.
Kind regards,
Pamela

Hi,
thanks for your reply and possible solution.
Unfortunately, i can't change the payment terms to my requirement.
The problem is that I need a variable date (starting from the invoice date, which we don't know yet),
and SAP only allows a fixed date.
If you know how to proceed, let me know.
Thanks in advance,
Regards,
Pam

Payment Term with Day Limit

Hi All,
Could anybody will give bit explanation how will SAP will work in below Scenario:
   Customer: X--- Assigned with Payment Term: ZB08
At OBB8, we defined two Paymet Term with ZB08, day limit are different. While posting document to vendor, which Payment Term i.e Payment term with Day limit will populate at document level.
Thanks inadvance.
Regards,
Venkat

Dear Srikanth,
Thanks for your immediate reply & valuable time.
I tried as you said, When i try to post Document on 06.05.2009 to vendor getting as below:
        Payment Term: ZB08      Days/Percent: 40/2.125         50/ ( Blank)
In OBB8, we define as follows:
ZB08 ( 15 Day Limit)-- Default for Baseline is Posting Date-- 2.125--Fixdays 15 & Adition month 01
                                                                                31                         01
ZB08 ( 31 Day LImit)-- Default for baseline is Posting Date-- 2.125--Fixdays 31 Addtional Month 01
                                                                                15                          02
Could you explain me, Why SAP taking 40 instead of 15 & 30 days based on posting date?
Thanks inadvance.
Regards,
Venkat

Re : Payment Terms 40 days due on 10 th month

Needs Payment Term Configuration :
Payment Terms 40 days due on 10 th month
Regards
Chandu

Hi,
I presume that your requirement is 40 days due and payable on the 10th of next month.
Here is my suggestion with an illustration.
You can create a payment term, say xxxx, with -
day limit = 2
payment terms / fixed date = 10
payment terms/ additional months = 1
and another payment term, with the same name xxxx, with
day limit = 31
payment terms / fixed date = 10
payment terms/ additional months = 2
This will work as follows -
An invoice dated 1st March, will get paid on April 10th, due date having fallen on April 9th
An invvoice dated 2nd March will get paid on April 10th, due date having fallen on April 10th
An invvoice dated 3rd March will get paid on May 10th, as it will be only 39 days due on April 10th
An invoice dated 1st April, will get paid on May 10th, due date having fallen on May 10th
An invvoice dated 2nd April will get paid on June 10th, as it will be only 39 days due on May10th
An invvoice dated 1st Feb will get paid on April 10th, as it will be only 38 or 39 days due on March10th
As majority of the months have 31 days, I came to a logical conclusion that the day limit can ideally be 2. However, you can decide a date that best suits your requirement.
Regards,
Mike

Maintain payment Terms according to PO Document Types

Hi,
We want to maintain Payment Terms according to PO Doc. type. Now in our system PO have disable Payment Terms.
But we have a requirement that for 1 Doc. Type they should be changeable.
How it is possible???

Hi,
Document type concept is used to differentiate the differentiate procurement processes like example:
YNB: For Standard procurement
YIMP: For Import
YSUB: For Sub Contracting
YSER: For Service
A company may have 10 payment terms and one should not use document type based on payment term. Payment term is maintained in vendor master and from vendor master payment tem flow to purchase order.
For each payment term, if one creates document type, then imagine how many document types will be created to meet business process requirement. Consultant should think & simplify business with proper designing for uses of minimum document types for procurement processes.
Regards,
Biju K

Extract data on report between last 30 days from current date.

Hi Experts,
Ealrier i had provided user promt to select the date range, now i need to schedule the report for this i have to set the date between last 30 days from current date.
How can i add this in formaula on record selection.
before:
{pm_process.pm_creation_date} in {@Start Date to UTC} to {@End Date to UTC}
I tried:
{pm_process.pm_creation_date} in CurrentDate() - 30 to CurrentDate()
But this is diplaying me only data of 30th date from current date.
Please advice.

Hi Brian,
Thank you!
1. I have not created any function for {pm_process.pm_creation_date} in [CurrentDate() - 30 to CurrentDate()] i am just adding this on Record Selection and its not helping.
2. {pm_process.pm_creation_date} in Last30Days; this is throwing below error.
please advice what to be done?

How to allow a user to change Payment terms on A/R documents

Hi All,
I want to allow one of my user to change payment terms on A/R documents. I could'nt found it where to authorize a user for this purpose. Can anybody help me out with this?
BR

Dear Naveed,
To enable users to change the Payment Terms in A/R, please give the user Full Authorization for Price Lists (Inventory -> Price Lists -> Price Lists).
Hope this helps.
Regards,
Lorna

Translation date from document date instead of posting date

I have a requirement to set automatically Translation date from Document Date instead of Posting Date as usual in SAP.
My company code hasnu2019t got neither 2nd local currency nor 3rd local currency.
As usual, when posting transactions in foreign currency, translation date is derived from posting date.
I would like to know if is possible to set that translation date would be derived from document date. As I said before, because of the company code only has one currency defined, is not possible to change it in OB22.
Thanks a lot

Has anyone ever tried to change the Translation date on the FI documents generated by F.05 (FBB1). I am having this requirement at one of the clients I am working on. I need to substitute the document date in the translation date field. I tried using substitution through GGB1 (OBBH) and also I tried using the BADI - FI_TRANS_DATE_DER, but none of the two options work.
Is there any other option to do it or did anyone had any success in doing this????
Appreciate all the responses.
thanks in advance.

Trying to subtract days from a date

Im trying to subtract days from a date.
When i use this query:
select sysdate-:p21_DAYS_OLD from dual;
it displays the correct date but not in the correct format. It is displaying 12-AUG-09 instead of 08/12/2009.
I tried this query but i get the ORA-01722: invalid number error.
select to_char(sysdate,'MM/DD/YYYY')-(:p21_DAYS_OLD) from dual;
Can someone help me please?
Deanna

Dclipse03 wrote:
Im trying to subtract days from a date.
When i use this query:
select sysdate-:p21_DAYS_OLD from dual;Just set the NLS_DATE_FORMAT parameter for your session and execute the above query.
ALTER SESSION SET NLS_DATE_FORMAT='MM/DD/YYYY'
/

Can I create a field that calculates number of days from a date field?

Hi all,
I need a field that will calculate the number of days elapsed whatever date is entered into the date field, and update that number of days based on the calendar/computer calendar date. Does that make sense?
https://www.dropbox.com/s/arkmnsxjkl4r156/AFBS_FacilitySpecialCareList02.pdf
I set up the form so that my boss can add or subtract clients from the list. Each client needs to have its own "Days since added to the list" number. Sorta like a little aging report.
Is this possible?
Many thanks,
Laura

Wow, I'm so stumped. I tried to copy a bit of formcalc into the exit event for my current date field to try to make this happen, but I can't get it to work.
My attempt at scripting is embarrassing, but here it is:
form1.sf1.CCSub.CCGroup.#subform[0].DateField2::exit - (FormCalc, client)
form1.sf1.CCSub.CCGroup.#subform[0].NumericField2.rawValue = Date2Num(DateField1, "MM-DD-YY") - Date2Num(DateField2, "MM-DD-YY")
and here's the file:
https://www.dropbox.com/s/arkmnsxjkl4r156/AFBS_FacilitySpecialCareList02.pdf
Can anyone help me get this right?
Sign me: One Lost Designer
Thanks!

Subract n days from a date

Using 2004s service pack 10. Is there a way to subtract x number of days from a date using a formula? I saw an earlier post that said to use function module RP_Calc_Date_In_Interval but when I search for this it says it doesn't exist. Is it called something else in 2004s? Is the only way to accomplish this using a function module?

If formula variable does not work and if the "no of days is a fixed number", then next alternative is to have a routine in transformation and make the subtraction.
Ravi Thothadri

Clearing Document Date do not follow the define clearing date in F-03.

Hi,
Clearing Document Date do not follow the define clearing date BKPF-BUDAT in F-03.
My user received the unpresented check statement from the bank on 31 Dec 2010. As 1 Jan 2011 is holiday and he came back to the office on 5 jan 2011. He post manual upload (Debit : Bank Outgoing and Credit : Unpresented Cheque) posting date 31.12.2010 (period 12/2010 and 01/2011 still open) . Hence the next step (same date on 5 Jan 2011) is to clear the Bank outgoing using F-03. He put 31.12.2010 as his Clearing date BKPF-BUDAT but when the system post the clearing date is 04/01/2011.
Please help

Hello,
Hope it helps.
But i can recall for the EBS bank statement upload into a previous fiscal year, ie, 31.12.2010. I had to close the current fiscal year temporarily.
See what happens in your system when it tries to clear with F-03. Though as mentioned re-check as F-03 will default to the system date --- today.
Regards
Waza

Payment term - 90 days from document date on 15th of the month

Similar Messages

Maybe you are looking for