Payment term for net90 and end of month

Hi Gurus,
how can I create payment term with following requirement
net 90+ EOM ( net 90 and end of month ).
Thanks

Implement the following SAP Note.
https://service.sap.com/sap/support/notes/1316578
You can then use transaction OBB8 to create terms of payment in which the due date is extended until the end of the month after a specified number of days.

Similar Messages

PO payment term for freight condition separate from payment term in header

Hello,
In the PO header we have payment term BB30 (30 days end of month).
they are written in the tab 'delivery/invoice'.
On item level, we have maintained a freight condition in the tab 'conditions'. With the magnifying loop we have maintained the condition details. So we have assigned that condition to a separate vendor (the carrier) and now we want to choose a different payment term for this vendor which is not the payment term in the header of the PO.
Is that possible? How?
Thanks!

Hi,
Maintain desired payment term in vendor master for transporter vendor.
In MIRO, system will pick payment term while doing 'Planned delivery cost' for that vendor.
Regards,
Piyush

Different payment term at header and item level

Hi,
In sales order(VA03) we r getting different payment term for header and item.
Eg: For header we get MZ30 and for item level MZ60.
It's only for a particular material. I have been asked to find out why? Any thoughts?
Thanks in advance
Chesat

Hi Lakshmi,
Where do we maintain this entry to reflect this change.

How to Create payment term for -Net Due 1st Day of Second Month Following

Hi,
We need to add a payment term for "Net Due 1st Day of Second Month Following Delivery". We need this to be in the system as soon as possible as we just were told of a change in terms for our client effective May 1st.
Kindly advice me how to select the dates in OBB8?
Thanks
Supriya

Hi Supriya,
In OBB8, create a new payment term with the following settings -
Default for baseline date = No default
Payment terms/Term 1/Fixed date = 1
Payment terms/Term 1/Additional months = 2
This payment term will ask you for a baseline date on document entry. You can give the delivery date as the baseline date. If required, this date can be changed after posting the document also.
Hope this helps.
Regards,
Mike

Regarding BP tcode and MK03 for updating payment terms for different vendor

My requirement was to update the payment terms in to MK03.
Our business useseres will give the payment terms for FI Vendores in BP tcode and save payment terms for FI Vendores in BP TCODE and this payment terms shoule updated ditrectly in to MK03 for every FI Vendor .
How we will update the payment frome BP to MK03 directly. In BP the technical name for payment terms was LFB1-ZTERM and in MK03 the technical name was LFM1-ZTERM .
I want to update payment for single company code only. In mk01, we creating vendors for purchase org level how we will update payment to mk01 from BP TCODE pls give how i have to update this payment terms from BP to MK01.

My requirement was to update the payment terms in to MK03.
Our business useseres will give the payment terms for FI Vendores in BP tcode and save payment terms for FI Vendores in BP TCODE and this payment terms shoule updated ditrectly in to MK03 for every FI Vendor .
How we will update the payment frome BP to MK03 directly. In BP the technical name for payment terms was LFB1-ZTERM and in MK03 the technical name was LFM1-ZTERM .
I want to update payment for single company code only. In mk01, we creating vendors for purchase org level how we will update payment to mk01 from BP TCODE pls give how i have to update this payment terms from BP to MK01.

Unable to change payment terms for BP

Forum,
I have a system where on the business partner master if we change the payment terms for a business partner the price list is also changing which we do not want it too. Is there a way to stop this from happening?
An example is:- The business partner's payment terms = 30 days with a price list called 'Distributor'
After changing the payment terms it changed the price list 'End User'
And if we change the payment terms back to 30 days it changed the price list again but to another called 'GN Purchase Price GBP'
I look forward to receiving your advise.
Regards,
Juan

Noticed afterwards that there is a Price List option within the payment terms screen. This is what's causing them to change.

Payment terms for Invoice plan

Hello All,
I've a Partial Invoicing plan for my equipment purchase. The first milestone payment is along with Purchase order. Means need to pay immediatly.
My PO is having payment terms - Payment 90days after end invoice month. This payment term is ok for all milestone payments. But for the first one, I need to pay immediatly.
Is it possible to have different payment terms / bye pass payment terms for the first milestone?
I don't want to use downpayment option for this.
RaviChandran

Hello.. Thanks for your feedback.
But in IV, normally due date is calculated from baseline date. Base line date will be defined by IV creation/posting date (Based on IMG setting). So by making the START Date for invoice Plan as Past Date will not work.
SS

FB10 - Default payment term for Credit memo

Hi,
I have question regarding the Payment terms in FB10- Credit memo entry (KG).
You must be aware that when we use F-43 or FB60 for posting Vendor Invoices (Document type KR), the payment terms on the screen will be "*", which means it should be picked up from the Master data. Similarly for posting Vendor Credit Memos (Doc type KG) using F-41 or FB65, the payment terms field is blank, which means 'Immediate payment'.
In case of FB10, Fast entry transaction code for both Vendor Invoice and Vendor Credit memo, the Payment terms for KR document is *. But for doc type KG (Credit memo), payment terms field is not blank. Instead, it is shown as *. Why is it? How can we make this blank for KG document postings. Please advise. Kindly revert in case you have any questions.
Regards,
Vinod

HI,
Please check the note 17410 for explanation.
Regards
Ravinagh Boni

Payment Terms - Only specify sales text for payment terms for customers !

What is wrong with the format in the attached screen shot ?
Do I have to Choose Customer & Vendor ?

Hi Emad,
This error “Only specify sales text for payment terms for customers" appears because this payment term is not applicable for customer. There are two choices either to delete the description text and make the payment term applicable only to vendor,However if you want to keep the description text, then make payment term applicable to customer as well by tick mark.
Regards,
Sam

Payment Term for advance payment

Hi
Can we configure a payment term for advance payment thro OBB8. it says that customer needs to pay us in advance.
If yes, how do we configure this.

the accounting document is created after a delivery for a customer invoice via billing.
i believe there is an option in SD where you have an extra tab for payment. Once the payment has been received, i.e. entered into the sales order, the delivery can be made.
This should work for your process, however best to speak to a SD consultant to get the full picture.
Hope this helps, assign points and mark thread as answered if it does!!!

Payment terms for different products from a single vendor

Hi Pundits,
Our client has a requirement to assign different payment terms for different products. Each product he buys from his vendor has it's own payment terms. He wants us to customize in such a way that when he/user enters the invoice, not only the vendor number is shown along with the product name but also the payment terms for that particular product are calculated.
I know that only one payment term can be assigned in the vendor master data. Is there anyway to get around this?
Creating the same vendor multiple times and assign payment terms looks a possible option but that looks quite hectic cause he has close to 1000 payment terms.

Taurian, thank you for that suggestion!
I can maintain as many existing payment terms as the client has with his vendors and let him choose the payment terms at the time of invoice entry.
The only problem is that he might have to change it according to the current market rates for that product. So maintaining any payment term is of little use.
Edited by: Dummy_Variable on Aug 16, 2011 8:26 AM

Payment Terms for Customer

Hi Guys
We have few payment terms for our company. Now we want to restrict payment terms based on the customer number
For example Payment term Z0001 for customer group 001 .....
Is it possible to restrict by doing some configuration
The next is we want to block few payment terms. Is it possible to block a payment terms
Warm Regards
Bala

Hi
The payment block is fine, i can either add a new payment block reason or i can assign the existing block reason and i can proceed
But what ever you have said will not control my user with the solution we have give, then the system will run if my user did things on correct process
I suppose we can do a validation, for this customer group this payment terms are allowed.
Something like that.
Hope it will work, can you put your valid suggestion
So at any point of time, it cannot be done by any standard configuration - hope iam right
Warm Regards
Bala

Maintaining payment terms for Installment payments

Hi;
Kindly let me know how to create payement term record for more than 4 installments.
As in STD. 3 installments we can maintain.
But how more than 4??????
Thanks in advance;
avinash

Hi Avinash,
you can use T. code OBB8 & OBB9 to create payment terms for installment planning.
1. Create Payment terms in OBB8 and Assign the payment terms created in OBB9.
2. I don't think there is any restriction on number payment terms you can create and assign. You can create and assign as many to meet your requirement.
Hope this helps you....

How can we maintain multiple payment terms for a customer

how can we maintain multiple payment terms for a customer?

Hi,
You can leave the Payment terms field in the sales area data tab blank. and you can enter the payment terms at line item level while creating the sales order. By that you will achieve multiple payment terms for the same customer in the same sales order. but the invoice will be split by standard SAP based on the payment terms.
Also difference between the "Payment Terms" field in Company code tab and the sales Area tab is.
Company code tab payment terms are used only for the documents that are posted directly in FI module. for example credit and debit memos posted directly in FI and as a leading practice this should always be "payable Immidiately"
Sales area Tab payment terms are the one which are copied on to the sales order header data which are valid for all the line items unless you specifically mention different payment terms at line item level.
Regards,
Shantanu

You cannot supply payment terms for your credit memo

Hi,
My req is as per below,
1) I would like to apply payment terms on credit memo screen throgu auto invoice creation.
When i tried to update ra_interface_lines_all.term_id then i got error message : You cannot supply payment terms for your credit memo
Can someone gudie me.How is it possible?
Thaks,
Raj
Edited by: RajPatel on Sep 23, 2009 8:33 AM

Hi octavio,
Thanks for your valuable input.
You are right and also I found from metalink...
Subject: 11.5-AR-How Can You Enter Payment Terms For Credit Memos
Doc ID: 249547.1 Type: HOWTO
Modified Date: 16-DEC-2003 Status: PUBLISHED
goal: How can you enter payment terms for Credit memos
fact: Oracle Receivables 11.5
fix:
Payment terms cannot be used in Credit memos. This is standard functionality.
The trx_date/gl_date of the credit memo transaction is the date which is
considered as the due date of the credit memos. This is the current
functionality.
Thanks,
Raj

Payment term for net90 and end of month

Similar Messages

Maybe you are looking for