Payment Terms Chenged
Hello to all!
somebody changed the payment terms PymntGroup field and made it same with an other one. so a mess of wrong data displayed in my reports. could you pelase tell me how can i find out who made the change?because there is no any Historical table
thanks a lot for your time!
Hi,
Unfortunately, there is no effective way to find what have been changed in the old B1 version. You need to run query from time to time to capture all BP's Payment Terms code so that you can restore them when necessary.
As for now, you can run a query to find all current term by:
SELECT T0.GroupNum, T1.PymntGroup,T0.CardCode, T0.CardName
FROM OCRD T0
JOIN OCTG T1 ON T1.GroupNum=T0.GroupNum
ORDER BY T0.GroupNum
In this way, you may find out which terms have be changed. You may also check the Payment Terms code in document to find out the old info.
Thanks,
Gordon
Similar Messages
-
Dear Friends,
I have 2 queries -
1. Can we configured the Payment Terms which will enable while invoicing to create the multiple line item while Invoice Posting ( accounting entry ) say, while doing MIRO / FB60 transaction. And one of those would go to Special GL. e.g. we have to deduct the Retention Money @ 5% from Invoice Amount and we are using one of Special GL for Retention money so can i configure the Payment Term as -
1. 95% -
60 Days
2. 5% -
365 Days
So here 2 ( 5% ) will be posted as Special GL item while Invoice Entry.
( Currently we are transferring those entries to special gl manually using T code - F-02 from Vendor Open items )
2. We have configured the number of Payment Terms but sometimes negotiated Terms does fall into the category of existing Payment Terms and it is not possible to create the Payment Terms for such requirement. So can we configure one Payment Term which will be editable while Purchase ORder Creation or Invoicing ( like payment term with "OTHERS" would be created and initially it would be configured for 0 Days and those would be edited while making Purchase Order as per requirement.
Since this is affecting our Ageing Analysis and Payment Due Report as both are based on Payment Terms in PO.
If anyone has solution pls suggest the way to do it . will assign full marks if gets solution.
Thanks in advance.
PSHi
I think we can't maintain cash discounts more than two %.
Goto OBB8, choose account type customer/vendor.
goto payment terms segment. 1) 3% days 0 2) 2% days 15.
3) we can enter %, only days. it means no cash discount.
Regards,
Chandra -
Getting split payment terms in case of customer credit memo(Doc type DG)
Hi Guys,
Is there any FM available for getting split payment terms in case of customer credit memo(Document type DG). There will be no invoice/billing doc for this document type and will be created from FB75 transaction. For billing document i am using FM SD_PRINT_TERMS_OF_PAYMENT_SPLI. Please let me know if there is any FM for accounting document also.
Thanks,
Vinod.Hi,
Try this bapi
BAPI_AR_ACC_GETSTATEMENT -
The payment terms are not getting reflected in PO
Hi,
We are in SRM5.0 Extended Classic scenario.
We have created new payment term in ECC and transferred to SRM using BBP_UPLOAD_PAYMENT_TERMS and after tranferring it to SRM I am able to see the new payment term in table BBP_PAYTERM and BBP_PAYTERM_TEXT in SRM system.
But non of the payment terms are not reflecting into PO. We are not getting any errors while processing the PO.
Could you please suggest what may be the issue here.
Best Regards,
SiddappaHello Siddappa,
I am a little confused here with the scenario.
I understand that the payment terms are recenly created and replicated. So naturally they would have been updated in the relevant vendor master as well. Now has the vendor master been replicated to SRM from ECC once the payment terms were updated.
So from what you have mentioned "When we check the BBP_PD, the payment term is reflecting for the POs created after shopping cart approval."
So does this mean once the SC is approved then the PO is created and then the Terms of Payment are seen in the PO.
However "If the PO created through describe requirement, the Vendor will not assigned the PO created will go to Held status and buyer will process the order."
So does this mean since the Vendor is not mentioned the Terms of Payment is not being reflected and will happen only once the same is specified in the PO.
I have a question on whether after replicating the Payment Terms, has it been seen in any of the PO's created so far or it is always blank.
Regards
Pramod -
How to get vendor payment terms
Hi all,
I am creating a report. I need to get vendor payment terms. There are invoices without PO, how can I retrieve the payment terms for those cases.
Thanks.Hi nene
in case of invoice without PO, The payment term will be selected from the vendor master data (in View : payment terms transaction in XK03).
Check payment term in master data is exist or not.
the data is in the table LFB1 : Field ZTERM
Regards
Wiboon -
Hi All
Is there a report that can give me the Vendor Payment terms
VishnuHi Vishnu,
go to SE16 , enter table name LFM1. in display parameters select ZTERM
Regards
Mangesh. -
Hi All,
Is there some table or report to see all clients
which has the payment terms more then 15 days?
Thanks in advance and best regards
LuisHi,
Go to Se11 or Se16, Enter table BSEG, click on display and select contents (CTRL + SHIFT + F10).
In the menu section go to settings - format list - choose fields - select field name MANDT - client and ZTERM - Terms of payment ,ZB1T,ZB2T,ZB3T and select copy.
Again go to settings - select fields for selection, select fields for zterm,ZB1T,ZB2T,ZB3T and Enter and Excute the table.
You will find the details as per your requirment.
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M -
Hello
Could you please help me with the below mentioned issue
We have two payment terms
A15TH_P30TH3% (1st – 15th)
A30TH_P15TH3% (16th – 31st)
“Invoices arrived till the 15th, pay on the 30th – invoices arrived till the 30th, pay on the 15th of the following month with 3% discount”
So invoices from the 1st – 15th we pay on the 30th with discount
Invoices from the 16th – 31st we pay on the 15th of the following month with discount
The Supplier payment-term in this case is A15TH_P30TH3%, because each supplier could only have one payment-term.
For each invoice from 16th-31st of the month we have to change the payment-term to A30TH_P15TH3% to get the discount.
If we forget to change the payment-term we lose the discount.
We use this payment-term really often because we only pay on the 15th and 30th or 31st of the month.
Is it possible to get a solution that we only need one payment-term for this first and second half of the month – payment term.
Thanks for your helpHi,
You do not need to create two payment terms. What you require here is proxima payment term.
While defining the payment term in AP, enter "15" in the cut off day. In the "Due" Tab, enter "31" in Day of Month and "0" in months ahead. In the First Discount Tab, enter 3% discount and "31" in Day of Month and "0" in months ahead.
Now, the system will automatically take due date for all the invoices received till 15th as 31st of the current months and for all the invoices received after 16th as 31st of the next month.
Attach this Payment Term to the Supplier and use it for all the invoice. No need to manually change it while creating the invoice.
I hope this functionality is available in the Application Version, you are working on.
Gajendra -
AP Payment terms ( discount ) end on week end
Hi Gurus
I have a situation where payment terms for an invoice falls on Saturday.So when when we run it on following Monday it disallow the discount ( 2% ). We pay manually with 2% discount.How can we resolve this issue of discount date falling on week end ?
Kindly give me some solutions please ?
Thanks
SatyaHi,
You do not need to create two payment terms. What you require here is proxima payment term.
While defining the payment term in AP, enter "15" in the cut off day. In the "Due" Tab, enter "31" in Day of Month and "0" in months ahead. In the First Discount Tab, enter 3% discount and "31" in Day of Month and "0" in months ahead.
Now, the system will automatically take due date for all the invoices received till 15th as 31st of the current months and for all the invoices received after 16th as 31st of the next month.
Attach this Payment Term to the Supplier and use it for all the invoice. No need to manually change it while creating the invoice.
I hope this functionality is available in the Application Version, you are working on.
Gajendra -
Hi,
I need to create a payment term for invoices dated from the 25th of the prior month through the 24th of the current month, payment is due in full (net) by the 25th of the next (proximo) month. e.g. Invoice range 06-25-2010 to 07-24-2010 due in full by 08-25-2010.
Please help me on this.
Rosalina GaitWith the same payment term you can define 2 different due date calulation based on the day limit. Please do F4 on the "Day Limit" field.
In you case, enter 24 in the day limit, and enter additional month "1" and Fixed date "25", and another one( for the same payment term) without day limit "empty" and enter additional month "2" and Fixed date "25".
If the "empty" day limit doesn't work, then please try with "31" as day limit. I don't remember the exact setting but the logic will definitely work with day limit
Thanks
Ron -
Hi all,
I have a requirement of adding description of Payment terms in the sapscript . Earlier the script only prints terms without description. It use to get the value from , &'Terms of payment: 'PEKKO-ZBTXT& in the sap script MEDRUCK.
Now i added table T052u in the print program to get the description of payment term, the field is T052U-TEXT1.
While creating payment term from tcode OBB8,Eg: Payment term is Z001 and we enter No of days and percentage . Suppose i enter 10 days , how is the script printing as "Within 10 days due net ".
I want to know where this field is stored, Pekko is a structure so iam not able to see this.
Please do tell me which table do i get to see this payment term w.r.t to PO
Waiting for ur Reply's
Regards,
ShujaCheck table :<u><b>T052U</b></u>
Hope thisll give you idea
<b>P.S award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise" -
Payment Term default to Purchase Order
Dear SAP guru,
We have problem that payment term is not defaulted to Purchase Order if the Purchase Order is converted from Purchase Requisition.
If purchase order is directly created in ME21N, the payment term will be defaulted from vendor master. However we have purchase requisition that is released/converted to purchase order, these POs willl not copy over the paymetn term from vendor master.
Can any one share how to make the PO always default payment term from vendor master eventhough it is converted from purchase requisition?
Thanks a lot in advance for your kind assisstance.
rgds
DahliaHi Rajesh,
Thanks for your quick reply. No, the PR is not referenced to contract. The PR is for external process, therefore the flows is asa follow:
1. Production order creation; for external process system automatically create purchase requisition.
2. Purchase requisition will have vendor code defaulted from production order routing. In the routing for external process you can define the vendor code.
3. Convert the purchase requisition into purchase order.
The problem the purchase order will not have payment term default from vendor master.
Thks
Dahlia -
Restricting Purchase order's payment terms change authorization
Hi,
While changing the PO payment terms, system does not reset the release strategy of the released PO. Is there any way we can restrict to PO change with Payment terms change authorizations?
Regards,
SattujHi,
Then make the release indicator as 1 then you cannot change any thing first you have to unrelease and then make the required change and then release the same
regards -
Purchase order and Payment terms
Hi,
My client requirement. The delivery date in PO: 25-09-2008. If the vendor pays goods delivery to us after 25-09-2008 he want to deduct 2% on po value as Late Delivery Fees. My client is asking automation of this scenario. Automatically at that time of GR this entry should happend based on above requirement.
Where we can do customization for this?
Please guide me.
Sateesh KumarHi,
Please maintain the payment terms in OBB8 as follow
Account Type will be the vendor. Default for baseline date will be the document date. In Payment Terms Tab, maintain as follow
Percentage will be 2% and number of days will be 15 days (for Example)
You can maintain the number of days according to your client requirement.
Regards,
Jigar -
Hello Experts,
What is the T code or report to see Purchase Order wise Payment Terms?
Regards,
ShirishHi Shrish,
You can see Po wise payment terms in EKKO table in SE16 tcode.
Regards,
Prasath
Maybe you are looking for
-
IMac G5 20" power supply problem
The power supply on my 20" G5 recently fried. Somehow I had the activity monitor showing that the "FaxJobMgr" was using about 70% of my cpu. I had had that problem before and the computer was very warm. I quit that process but shortly after that ther
-
can anyone help the exact message is one of the usb devices attached t this computer has malfunctioned and windows does not recognize it for assistance solving this problem, cick this message please elp i dont want to have been ripped off Dx
-
how to transfer music from pc 10.6.1.7 v to MAC 11.0.1 v. Help! Not sure how to do it
-
Analysing tools for KM documents
Hello, Does anybody know, if there are any analysing tools available, with which you can analyse the access of the KM documents. They should answer questions like - when was the last access to a documents? - which documents have an average rating low
-
Run process flow over database link
Hi guys, I have two projects here, A and B. Each project has its own process flow, lets say Process A (in project A)and process B(in project B). I need to run process B in process A, so I use the database link, and WB_RT_API_EXEC.run_task function. B