Payment terms datasource

Hi,
Can anyone please tell me the datsource name for Payment terms?does one exist i am not able to find or should we go for customized ones?
Regards,
G.Monica Roja Flora.

Hi,
In which scenario u need this...as I found some related Master data in Business content.
Below r the Infosources for payment terms master data.
0GT_ZTERM, 0GT_ZTERMSD, 0CRM_PMNTTR, 0PMNTTRMS and 0UCPYTERMS
Regards,
ARK

Similar Messages

Vendor Payment term Datasource

Hi
I have requirement to extract SAP vendor payment terms master data to BW. can you pls help me with right datasource for this.
Which datasouce needs to used to extract vendor payment term.
In SAP, we can use via SAP is FK03 transaction.
Regards,
Anbu

Hello Anbu
Data flow is like this
0FI_AP_4 ( DataSource) -
>0FI_AP_O03 ( DSO) -
>0FIAP_C03 ( Cube).
If you install the standard cube in BW system with Data Flow before option , it will install the complete flow.
Regards
Anindya

How to get PO and vendor payment term number of days??

Hi Experts,
I want to have a) Purchase order payment term number of days as well as
b) vendor Payment term number of days.
For a) For Purchase order payment term number of days I am using table EKKO and taking ZBD1T field which is giving payment
           term number of days.
          Is it correct??
      b) vendor Payment term number of days I am using table LFB1 field Zterm to take payment term key not number of days.
           Based on this key i will go to table T052 and find corresponding number of days as told MM consultants .
           But this is not BW work. We need one single table from which we can take the field or enhance the current extractor
          with that field.
So is there any other option for (b)
and Whether steps for (a) is correct???
Please confirm this.
Thanks in Advance,
Uday Shankar.

For a) For Purchase order payment term number of days I am using table EKKO and taking ZBD1T field which is giving payment
term number of days.
Is it correct??
Payment terms for purchasing doesn't come delivered as part of the R3/ECC tables and is usually is added as a custom field to EKKO and populated via a User Exit. That looks to be the instance in your case because the field that you show as being the payment terms begins with a Z (custom fields begin with Y or Z). That appears, without being able to actually validate in your R3/ECC environment, to be the correct field to use. You would have to validate, however, with the end customer or your MM function consultant to be 100% certain. If this is the correct one to use, you're going to have to enhance the 2LIS_02_HDR extractor by enhancing the extraction structure and creating the User Exit to read it from EKKO and populate into the DataSource.
b) vendor Payment term number of days I am using table LFB1 field Zterm to take payment term key not number of days.
Based on this key i will go to table T052 and find corresponding number of days as told MM consultants .
But this is not BW work. We need one single table from which we can take the field or enhance the current extractor
with that field.
You can enhance the 2LIS_02_HDR extractor with the Vendor Payment Terms by joining the following in your User Exit:
EKKO-LIFNR = LFB1-LIFNR
EKKO-BUKRS = LFB1-BUKRS
LFB1-ZTERM = T052-ZTERM
This could either be done in a SELECT statement in the User Exit to do this equi join, or you could create a view on your R3/ECC environment and SELECT from that view.

Payment Term Master Data

Can anyone advice me on how to create master data attribute data source in R/3 for Payment Term :
Please advice me on which table that i should extract the data from :
Thank you in advance

Hello Sarvanan,
Check out table : TVZBT for payment terms master data.
Create generic datasource on the table TVZBT
replicate it into BW
assign the datasource to the infosource
map the objects create transfer rule transfer structure.
CReate infopackage and schedule it.
Regards
Nimesh

What field represents Payment terms in order tables

Hello BW-SD Experts
I am implementing a project that requires a report on payment terms of an order. This is a BW project but however, it is an SD report.
I need to know what field represents payment terms in SD tables - header or item table?
Which field also represents complete delivery indicator.
Thank you.

hello
thanks for your answer, its helpful but those fields you mentioned are not in 2LIS_11_VAHDR and 2LIS_11_VAITM where the SD consultant says I can find the payment terms and complete delivery indicator.
Can you tell me if they are there? or the datasource with the fields you mentioned.
Thanks

Payment Terms configuration

Dear Friends,
I have 2 queries -
1. Can we configured the Payment Terms which will enable while invoicing to create the multiple line item while Invoice Posting ( accounting entry ) say, while doing MIRO / FB60 transaction. And one of those would go to Special GL. e.g. we have to deduct the Retention Money @ 5% from Invoice Amount and we are using one of Special GL for Retention money so can i configure the Payment Term as -
1. 95% -
60 Days
2. 5% -
365 Days
So here 2 ( 5% ) will be posted as Special GL item while Invoice Entry.
( Currently we are transferring those entries to special gl manually using T code - F-02 from Vendor Open items )
2. We have configured the number of Payment Terms but sometimes negotiated Terms does fall into the category of existing Payment Terms and it is not possible to create the Payment Terms for such requirement. So can we configure one Payment Term which will be editable while Purchase ORder Creation or Invoicing ( like payment term with "OTHERS" would be created and initially it would be configured for 0 Days and those would be edited while making Purchase Order as per requirement.
Since this is affecting our Ageing Analysis and Payment Due Report as both are based on Payment Terms in PO.
If anyone has solution pls suggest the way to do it . will assign full marks if gets solution.
Thanks in advance.
PS

Hi
I think we can't maintain cash discounts more than two %.
Goto OBB8, choose account type customer/vendor.
goto payment terms segment. 1) 3% days 0 2) 2% days 15.
3) we can enter %, only days. it means no cash discount.
Regards,
Chandra

Getting split payment terms in case of customer credit memo(Doc type DG)

Hi Guys,
Is there any FM available for getting split payment terms in case of customer credit memo(Document type DG). There will be no invoice/billing doc for this document type and will be created from FB75 transaction. For billing document i am using FM SD_PRINT_TERMS_OF_PAYMENT_SPLI. Please let me know if there is any FM for accounting document also.
Thanks,
Vinod.

Hi,
Try this bapi
BAPI_AR_ACC_GETSTATEMENT

The payment terms are not getting reflected in PO

Hi,
We are in SRM5.0 Extended Classic scenario.
We have created new payment term in ECC and transferred to SRM using BBP_UPLOAD_PAYMENT_TERMS and after tranferring it to SRM I am able to see the new payment term in table BBP_PAYTERM and BBP_PAYTERM_TEXT in SRM system.
But non of the payment terms are not reflecting into PO. We are not getting any errors while processing the PO.
Could you please suggest what may be the issue here.
Best Regards,
Siddappa

Hello Siddappa,
I am a little confused here with the scenario.
I understand that the payment terms are recenly created and replicated. So naturally they would have been updated in the relevant vendor master as well. Now has the vendor master been replicated to SRM from ECC once the payment terms were updated.
So from what you have mentioned "When we check the BBP_PD, the payment term is reflecting for the POs created after shopping cart approval."
So does this mean once the SC is approved then the PO is created and then the Terms of Payment are seen in the PO.
However "If the PO created through describe requirement, the Vendor will not assigned the PO created will go to Held status and buyer will process the order."
So does this mean since the Vendor is not mentioned the Terms of Payment is not being reflected and will happen only once the same is specified in the PO.
I have a question on whether after replicating the Payment Terms, has it been seen in any of the PO's created so far or it is always blank.
Regards
Pramod

How to get vendor payment terms

Hi all,
I am creating a report. I need to get vendor payment terms. There are invoices without PO, how can I retrieve the payment terms for those cases.
Thanks.

Hi nene
in case of invoice without PO, The payment term will be selected from the vendor master data (in View : payment terms transaction in XK03).
Check payment term in master data is exist or not.
the data is in the table LFB1 : Field ZTERM
Regards
Wiboon

Vendor Payment Terms

Hi All
Is there a report that can give me the Vendor Payment terms
Vishnu

Hi Vishnu,
go to SE16 , enter table name LFM1. in display parameters select ZTERM
Regards
Mangesh.

Report for payment terms

Hi All,
Is there some table or report to see all clients
which has the payment terms more then 15 days?
Thanks in advance and best regards
Luis

Hi,
Go to Se11 or Se16, Enter table BSEG, click on display and select contents (CTRL + SHIFT + F10).
In the menu section go to settings - format list - choose fields - select field name MANDT - client and ZTERM - Terms of payment ,ZB1T,ZB2T,ZB3T and select copy.
Again go to settings - select fields for selection, select fields for zterm,ZB1T,ZB2T,ZB3T and Enter and Excute the table.
You will find the details as per your requirment.
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M

AP Payment Terms

Hello
Could you please help me with the below mentioned issue
We have two payment terms
A15TH_P30TH3% (1st – 15th)
A30TH_P15TH3% (16th – 31st)
“Invoices arrived till the 15th, pay on the 30th – invoices arrived till the 30th, pay on the 15th of the following month with 3% discount”
So invoices from the 1st – 15th we pay on the 30th with discount
Invoices from the 16th – 31st we pay on the 15th of the following month with discount
The Supplier payment-term in this case is A15TH_P30TH3%, because each supplier could only have one payment-term.
For each invoice from 16th-31st of the month we have to change the payment-term to A30TH_P15TH3% to get the discount.
If we forget to change the payment-term we lose the discount.
We use this payment-term really often because we only pay on the 15th and 30th or 31st of the month.
Is it possible to get a solution that we only need one payment-term for this first and second half of the month – payment term.
Thanks for your help

Hi,
You do not need to create two payment terms. What you require here is proxima payment term.
While defining the payment term in AP, enter "15" in the cut off day. In the "Due" Tab, enter "31" in Day of Month and "0" in months ahead. In the First Discount Tab, enter 3% discount and "31" in Day of Month and "0" in months ahead.
Now, the system will automatically take due date for all the invoices received till 15th as 31st of the current months and for all the invoices received after 16th as 31st of the next month.
Attach this Payment Term to the Supplier and use it for all the invoice. No need to manually change it while creating the invoice.
I hope this functionality is available in the Application Version, you are working on.
Gajendra

AP Payment terms ( discount ) end on week end

Hi Gurus
I have a situation where payment terms for an invoice falls on Saturday.So when when we run it on following Monday it disallow the discount ( 2% ). We pay manually with 2% discount.How can we resolve this issue of discount date falling on week end ?
Kindly give me some solutions please ?
Thanks
Satya

Hi,
You do not need to create two payment terms. What you require here is proxima payment term.
While defining the payment term in AP, enter "15" in the cut off day. In the "Due" Tab, enter "31" in Day of Month and "0" in months ahead. In the First Discount Tab, enter 3% discount and "31" in Day of Month and "0" in months ahead.
Now, the system will automatically take due date for all the invoices received till 15th as 31st of the current months and for all the invoices received after 16th as 31st of the next month.
Attach this Payment Term to the Supplier and use it for all the invoice. No need to manually change it while creating the invoice.
I hope this functionality is available in the Application Version, you are working on.
Gajendra

AP Payment term

Hi,
I need to create a payment term for invoices dated from the 25th of the prior month through the 24th of the current month, payment is due in full (net) by the 25th of the next (proximo) month. e.g. Invoice range 06-25-2010 to 07-24-2010 due in full by 08-25-2010.
Please help me on this.
Rosalina Gait

With the same payment term you can define 2 different due date calulation based on the day limit. Please do F4 on the "Day Limit" field.
In you case, enter 24 in the day limit, and enter additional month "1" and Fixed date "25", and another one( for the same payment term) without day limit "empty" and enter additional month "2" and Fixed date "25".
If the "empty" day limit doesn't work, then please try with "31" as day limit. I don't remember the exact setting but the logic will definitely work with day limit
Thanks
Ron

Purchase Order Payment terms

Hi all,
I have a requirement of adding description of Payment terms in the sapscript . Earlier the script only prints terms without description. It use to get the value from , &'Terms of payment: 'PEKKO-ZBTXT& in the sap script MEDRUCK.
Now i added table T052u in the print program to get the description of payment term, the field is T052U-TEXT1.
While creating payment term from tcode OBB8,Eg: Payment term is Z001 and we enter No of days and percentage . Suppose i enter 10 days , how is the script printing as "Within 10 days due net ".
I want to know where this field is stored, Pekko is a structure so iam not able to see this.
Please do tell me which table do i get to see this payment term w.r.t to PO
Waiting for ur Reply's
Regards,
Shuja

Check table :T052U
Hope thisll give you idea
P.S award the points.
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

Payment terms datasource

Similar Messages

Maybe you are looking for