Payment to the customer through APP

Dear All,
I wanted to make a payment to the customer through APP, do i have to do any specific settings for this to hapen through APP.
This is a secenario relating to Loans management, where in the business partner is defined as a customer and to whom we need to make a loan disbursement, but when i am trying to run the APP i am not able to make a disbursement, when i am trying to manually pay through f-53, it says this customer is not defined as vendor
can anyone help me in this regards.
Thanks in anticipation
vinila

hi vishal / Radha
thank you for ur inputs
the transaction code f-31 has sloved the issue of making disbursement ot the customer, but is it possible to pay a customer thougth APP? if yes then want are the required settings in the configuraiton.
thanks & regards
vinila

Similar Messages

Down payments to different vendors through app (f110)

hi frineds how can i make down payments to different vendors through APP in (f110), where should i configure this settings ? pls help me with t.codes and paths..

SETTINGS:
Usually "F" is used for DPR (DOWN PAYMENT REQUEST) and "A" is used for DP (DOWN PAYMENT).
"F" has as target indicator "A" by OBYR transaction.
POSTINGS:
By F-47 You post a DPR.
During the DPR posting, you have to insert the Target indicator; usually A and the DPR will report F as special indicator. ( Bcoz DPR(F) will target DP, that is A)
Into FBZP --> All company codes --> Sp. G/L transactions to be paid --> if you insert F, the System will take the DPR previously posted during the F110.
But if you posted some DPs, these DPs will not take in consideration by F110.
ALL THE BEST

My mobile Was stolen and i erase the data through app find my iphone but I want to Destroy the hard disk What shall i do ?

Dear Sir,
i bought iphone 6 plus 2 months ago from Apple store in UK.
And it Was stolen 5 days ago in Paris and I erase the data through ( app find my iphone ).
but I want to Destroy the hard disk What shall i do ?
Please i need your help.
Best regards
Alaa Baeshen

Dear sir,
DO you have any idea how to get delivery report for the sent messages ?
Or receipt messages ?
Thanks
Best regards

Payment from the customer is not showing in the lockbox transaction.

Hi all,
When i execute transaction code FLB1, I could not able to find lockbox and customer did the payment but it was not reflected in sap.
Payment from the customer is not showing in the lockbox transaction.
Please suggest and gide me with solution what could be the reason i am not awear of lockbox process.
Regards,
JC
Edited by: jcnaidu on Sep 17, 2010 6:41 AM

The messages are getting to the recipient...
I am on a Comcast IMAP server if this has anything to do with it and the server settings are following the correct server port numbers, SSL settings, etc... I save Sent messages on the IMAP server for 90 days.... None of these "disappearing" messages were on the server for more than a couple of days.. Typically, these messages will get 'hung' in the Outgoing Mailbox for @30 seconds before sending... like they are being scanned for viruses or Mail can't connect to the server all of a sudden...
I anybody else here is on a Comcast IMAP server, and having this problem of disappearing Sent messages... This would tell us that it might be a Mail Provider issue with their outgoing server...
--prd54usa

Need to send sms to the customer through Oracle Apps Custom form

Hi All,
This is sandeep, i have design a Oracle Apps Custom form, i am entering the Customer related date like customer name, number, customer Amount, cheque number, customer phone number, user want, when the user will save that form, so that above information should be send to the particular customer automatically, user entering the only one customer at a time. again user will open the new form and enter the new customer related data for that i have URL provided by the third party.
Please help me how can i achieve it, and what code i have to write and where.
it's urgent. kindly reply me as soon as possible
Thank you in advance
Regards
Sandeep
Edited by: user13014881 on Feb 14, 2012 10:25 PM

I have resolved that issue my self. now i am able to send transitional messages to the customers.
Thanks
Sandeep

Rerouting or transfering the customer through PSTN

Dear Sir,
i need help in configuring ICM script ,CVP,and other need compoents to acheive the following :
simply , the customer dialed certain DN to hit the Ingress gateway ,trigers ICM Microapplication script ,hears menu options,one of options allows the caller to enter some credentails to make sure that the caller is trusted and accordingly the custeomer can insert pstn number(mobile,landline,international) that enable to connect the customer with the number he/she entered.actually i need how to configure the icm script and CVP to enable the custome be connected with the number he entered after credentials passed.
regarding what i have: i have ICM 7.2.5,CVP 7.0.2, CUCM 6.X, VXML 3500xm and IGWs 5300xm .
regards and thanks

This is what I read you're asking, please let me know if it's incorrect. You have an ICM and CVP setup, the call comes in and you play a microapp where you authenticate the caller. Once the caller is authenticated, you transfer then to some number they have entered, this number is through the PSTN.
First, it would be much easier and robust if you were using CVP as your error handling would be much more robust. However, you can achieve this in a very basic way. Have a microapp where they enter their account/password. Do an ICM database lookup against this account to ensure it's the correct account. Have another microapp ask them for the phone number to transfer to, if you have TTS validate this number is correct. If you don't have TTS, have them enter the number again, then copare the two entries, if they are not the same the number is wrong and they will have to enter it again. Then you can pass that number to a dynamic label which routes it out to either UCM to make the outbound call. Ideally you could use a take back and transfer or a sip refer which would send the call out to the PSTN without tying up any of your outbound trunks.
david

Sales order confirmation to the customer through email

Hi
I have configured output type z101 for sales document.Here I selected transmission medium 5 for 'External Send' . After that I completed output determination procedure as same steps and testing purpose I opened VA02 and goto Extras> ouput>Header>Edit>
here I entered ouput type ,medium 5(External Send),partner,language.
My issue is
Whenever I created(saved) the sales order then immediately order confirmation goes to the customer emailid. customer email maintained in customer master(xd01).
Please inform the what are the required settings using SCOT Transaction. This is the urgent need.
Regards,
Ravi

Please have a look at the note 455140.
Also look at the following weblog.
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
Message was edited by: Vinod C

Reg Invoice copy sent to the customer through Email

Hi Gurus,
As per my client requirement , he wants to sent the soft copy of the invoice copy to the customer mail id.
To meet this what are the setting i need to do .
please clarify it.
Thanks and Regards
satish

Hi ,
Create output type---in this select the Transaction medium as (simple mail-7)
2) while maintaining condition records VV31 check medium field.
Even if you mail to u r customer discuss with u r abaper for customer mail server migration.
Regards
raj.

Hey its not accepting my payment for the photoshop single app membership plan.it just stays there, Help?

i have been trying to pay for the single app membership plan for the past 3 days and its not accepting my payment..it just stays at this page forever. please help i need this fixed urgently

I think you need to contact Adobe directly
Adobe contact information - http://helpx.adobe.com/contact.html
-and Adobe Knowledgebase http://www.adobe.com/support/
-or http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

I have installed The Lion through App Store but i'm unable to find it in applications in order to create a bootable disk ? what can i do ?

What to do ?

If you've installed it, the installer is no longer there - it self destructs after the install. You will have to downlod it again; when the download is finished, stop the installer and go to the Applications folder. You will find the installer there - save it to a safe place.

Personnel payments through APP

Dear All
For paying the employee through APP, .i.e Bank Transfer and Cheque, what are the setting I need to make from the FI side. I know that we need to click the allowed for personnel payments. But after doing it if i run it in F110, its saying "NO Accounts have been selected yet". What is that i need to as a FI consultant so that the APP selects the employees in F110.
Appreciate your quick response.
Regards
Rajaram

I don't believe F110 pays payroll. If you have replicated employees as VENDORS by using PRAA, F110 can pay those "employee vendor" records. That's how we pay employees for travel reimbursements or other type of reimbursements but not PAYROLL. You can check with your HR experts, but they use different tcodes to run payroll. I'm not sure if they can use the payment medium workbench. At our organization, they (payroll) uses RFFOUS_T to do ppd ach. Yes F110 can also access RFFOUS_T, but so does whatever tcode HR uses to run payroll.

Incoming payments posting without clearing the customer open item

Hi,
Is there a way to post an incoming payment to a customer and let it sit as an open item?
I want to segregate the posting and clearing of AR payments.
One user posts the payments to the customer account.
Another user clears this payment against an open item.
All t.codes F-26, f-52 and f-28 all go on to processing open items and don't work for me..
Does anyone have any workaround or suggestion on how to accomplish this?
Thanks

I can suggest posting the cash to the customers account as an unallocated enty using F-28 - we use charge of the difference and the posting keys to mange this.
The the other users can contra the items to the open items using F-32 clear customer.

Paying excess payment recieved to the customer.

Dear SAP gurus,
In this scenario, my client bills their customer on a regular basis. sometimes, the client receives excess payment from the customer.. now, they want to refund the excess payment to the customer. pls guide how to map this in SAP?
Regards

yes you can iisue a credit memo for that using tcode fb75...this will result to a liability presentation in FS.
or
you also create a vendor account to the customer.. and pay it via f-58....
fing out the BPP to the TCODE...
link
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
Edited by: Roy Jensen Carasco on Feb 16, 2009 8:47 AM

With holding tax deducting at the time of APP

Hi,
I configured the WHT of payment and Invoice and assigned the same to the vendor. I made the WHT base as manual and posted the amount manually both at the time of down payment and at the time of invoice.. But the system is again deducting the TDS while I am making the payment to vendor through APP. Could you please explain what settings I have to do in order to not to deduct TDS at the time of APP
Advance Thanks
Koteswara Rao

Hi,
It is not nullifying it is deducting again at the time of payment.
At the time of advance payment
Vendor a/c Dr 5000
To TDS             100
To Bank           4900
At the time of invoice posting ( invoice is for 10000)
Exp A/c dr            10000
To TDS on 5000       100
To Vendor              9900
When I am tryingto make the payment of balance 5000 through APP it is deducting again 100/- and paying only 4900 to vendor.. Hope this is clear and please now tell me what the problem

Payment block in customer/vendors - how to clear

Hi there,
We have a situation where we have a customer, who is also a vendor. When we receive a remittance from the customer, sometimes they deduct the vendor invoice from the remittance. Because of this we always post invoices to this particular vendor with automatic payment block - so that we do not pay them in error. i.e. the payment crossing in the post!
When we receive payment from the customer, we use transaction f-26 and by selecting more add the vendor to the payment file, however we are not able to allocate the vendor invoice as there is a payment block against it. We know how to take the payment block off,, but this means coming out of F-26, unblocking and then going back in.
Does anyone know of a single transaction that will allow us to unblock a vendor invoice and allocate to a customer payment?
Thanks in advance (hopefully with fingers crossed!)
Jackie

you can do it in F-26
Go to process open items.
Go to "Edit"
Go to "Select more"
Change the account type to "K" and enter the vendor number.
You may need to make sure Doc type "DZ" is set for for "K" which is easy to do in config.
Message was edited by:
Mark Chalfen

Payment to the customer through APP

Similar Messages

Maybe you are looking for