Payment transfer as a replacement of direct deposits or check is not doing

We have configured payment method 'X' as a transfer in the table T042Z which has name of the print program RFFOUS_T.
When we tried to the transfer as a replacement of direct deposit or check the system is giving an error message "No payment selected from Preliminary Data Medium Exchange Program".
Is there any possibility to maintain configuration settings to allow a transfer as a replacement of direct deposits or check?
Any inputs on this requirement would be much appreciated!!!
Sreeni

Apologies! I screwed the post up somewhat. What I was looking for was not so much solutions to my specific problems (which are definitely FAQS, sorry), but an explanation of how Systemd and ConsoleKit and the other bits and piece interact. In particular:
Should I still have ConsoleKit running on my system at all? The wiki indicates its been supplanted entirely, but it's still running on my system. And,
What's the difference between Systemd's service and config files (under /usr/lib/systemd) and the "org.freedesktop" policy files -- are they complementary, completely orthogonal, or has one superseded the other?
I'd be happy with two sentences of explanation. Or Google search terms. Or crickets and silence.
Thanks,
Eric

Similar Messages

  • Posting Direct deposits and Check payments into two GLs

    I am not sure what the technical terms are, when you make a payroll run (weekly/Biweekly/Monthly wage payments) is it possible to post the different payment methods into different GL accounts ? Ex: direct deposits into one GL and all check payments into a second GL
    If yes, please provide the tcodes or IMG path.

    Hi Vinod,
    When we talk about postings, its all about mapping of Wagetype to Symbolic Account and then symbolic account to G/L. This is how the WT mapped to G/L
    So in case of net pay the WT is /559 in both the cases, so if u want to post the same WT to two different GL's then its only possible through wht employee grouping/account assignment you have define and how you have make the decision tree of feature PPMOD.
    But if we talk about that for direct deposit itshould go to one and for check to other, I dont think so its possible by any standard configuration
    Hope this will help
    Regards
    Guds

  • I just got a new iphone4.  I want to transfer my contacts from my old iphone but itunes is not doing it

    I just got a new iphone and want to transfer my contacts from my old iphone, and photographs.  when I sync it has not transfered anything to the new phone.  thanks.

    In iTunes, did you click your  iPhone under "devices" then go through the tabs to set things up?  There's one setting that you need to check to sync contacts.  

  • Payment Posting - Replacing a direct deposit with a check

    Dear Experts,
    I need your advise on the following:
    Running SAP ECC 6.0 and gross to net payroll. The net pay wage type is posted to different account based on payment method (Direct deposit or check).
    In instances where the employee has provided a wrong bank account number, the ACH is rejected by bank and we have to perform the payroll replacement via OC workbench to pay the amount via check. After the OCWB process we call a process model to print check and second step of the process model is to call Payment posting program (H99_POST_PAYMENT).
    The payment posting step posts the amount to account for the check (as the employee is now paid via check) but it does not reverse the original entry which was made when the employee was paid via ACH.
    SAP responded back saying it doesnot/cannot reverse a portion of the payment posting document when these types of adjustments are made. I wanted to reach out to other users/experts to see what process they are following to reverse the  entry.
    Any help is greatly appriciated.
    Thanks

    Hi,
    Generally process goes this way.
    If amount posted is incorrect or may be due to incorrect account provided during direct deposit.
    Run prenotification program after payroll to convert direct deposit to checks for 10 days until this time bank is sent with bank account file by client to validate accounts and if there are any changes then they are made in system.
    Once confirmed after 10 days automatically checks will be again converted to direct deposits for employees for whom prenotification was run.
    The steps will be :
    Payroll run
    HR Posting run
    Prenotification run
    Pre-DME run
    Print check and DME run
    Also, if your client does not want prenotifcation then you will need to set-up process model to first run for reversal of postings and then to run for replacement of payment through process model set-up.
    Thanks,
    Ameet

  • HT4623 hi i have ipad 2 and i want to connect my external hard disk to transfer data from ipad to directly to external drive?

    hi i have ipad 2 and i want to connect my external hard disk to transfer data from ipad to directly to external drive?

    Only if you have an app and a wifi hard drive like this
    http://www.seagate.com/external-hard-drives/portable-hard-drives/wireless/wirele ss-plus/?cmpid=ppc-_-satellite-_-g-_-us-_-wifi_hard_drive-_-e

  • Payment Transfer Prinitng using Z-script

    Dear All,
    I am trying to print Payment transfer form from the transactions FB60 and F110.
    Here I have taken the Z-copy of the Script form "F110_D_AVIS" and modified the script to my requirement.
    Then I assigned the Z-form in the FBZP transaction.
    But the output is coming as it is in the standard. The Z-form is not reflecting in the payment transfer output.
    On the other side, I changed the form to "F110_CH_AVIS" in the FBZP transaction to test whether that standard is reflecting. But it is also not reflecting in the output.
    Can anyone help me. what could be the reason for this issue?

    Hi,
    I tried all your options. It is also not the transportation problem.
    I even tried Script debugger, it is not breaking at the script position.
    Now with different options.. I tried the Japanese Bank transfer script and program, but the output itself is not coming.
    Also I tried with taking Z-copy of the driver program which was assigned in FBZP trxn and kept break point in front of the OPEN_FORM function module.. then also it is not breaking while running in F110.
    Can anyone show the way to resolve this issue?

  • 4.6C FI-FM Payment transfer settings.

    Hi, everyone!
    Can you give me an advice – whether it is possible to change settings of Payment transfer program (RFFMS200) from “S200 Original Functions” to “S200 Enhanced Function”, considering that there are actual postings already recorded in the productive system.
    Thanks.

    Hi Julie,
    Please kindly consider the following SAP notes and all the related notes mentioned in each one:
    429225 -  Migration FI-FM to SAP R/3 Enterprise Public Services 1.10  *** to me, the most important one
    427546 -  Important notes for FI-FM and PSM-FM *** THIS IS MORE A GUIDELINE WITH ALL IMPORTANT NOTES
    669764 -  FI-FM migration to R/3 Enterprise (4.7) EA-PS 2.00
    827329 -  Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00)
    1082741 - Migration to ERP 6.0 (EA-PS 6.00)
    1030497 - SAP ERP 6.0: Public sector scenarios in new general ledger
    You should consider all the migration notes from the releases in the middle of 4.6c and ECC 600.
    I used it for a migration and it worked
    Just a hint, any issue with FI-FM which calls in ECC6 now, kindly report in one of the following forums:
    Expert Forums - Industries - Public Sector
    Expert Forums - SAP SOlutions - ERP Financials
    There you will find a lot of people that works with FI-FM (new name PSM-FM) and can help you with future issues, including me
    I hope I could help you
    Kind Regards,
    Vanessa Barth.

  • Payment transfer program with PSCD

    Hi,
    The payment transfer program works if we use FIAP
    But when pay vendor invoices through the process of PSCD we have the status paid but we don't see which vendor invoices have been paid.
    Does the program works normally with PSCD
    Best regards
    Salvator

    The process payment in PSCD, to make for cash desk and/or payment lot, then
    You need configure for payment, the seletion category R- REFERENCE FOR PAYMENT FORM, when to apply the payment.
    and aditional in Account balance display, for when to see the balance of contract account or business partner.
    When to do the aplication of payment, it need write the invoicing number
    I hope that my coment help you

  • ISU  FI-CA Payment transfer - Transaction FP40

    Hi, we want to build a payment transfer functionality to transfer one payment document from one contract account to multiple contract accounts or contracts with amounts meaning the payment documents will be 500 and we want to transfer to two contract accounts, 250 each. Can you please advice me on which BAPI to use to do the transfer to more than one receiver?
    Transaction FP40 can only transfer from one to one and we need to do one to many.
    Kind Regards

    Hi.
    It's a single idea, but it could work
    use BAPI_CTRACDOCUMENT_TRANSFER to transfer open FI-CA Items. But it work whit one document on time.
    You can make a program and control the transfer. first split a single document and call this BAPI for each target document.
    Juda

  • Is it possible to transfer music from a cd directly to Nano

    Is it possible to transfer music from a cd directly to Nano

    No. It needs to go through iTunes on a computer.
    (107103)

  • I am ordering a new IPad 4 and I now own an Original IPad.  Can I transfer all settings and info. direct from old to new?

    I am ordering a new IPad 4 and I now own an Original IPad.  Can I transfer all settings and info. direct from old to new?  How?

    Yes, restore the iPad usind a backup file created in iTunes from the iPad 1.

  • HT4972 hi. my iphone 3gs was stuck on apple logo, does not charging. when i replace the battery, it works, my promblem not is, in can't or won't read the simcard. i cant activate my phone. even i put att simcard. how can i activate it? please help me. tha

    hi. my iphone 3gs was stuck on apple logo, does not charging. when i replace the battery, it works, my promblem not is, in can't or won't read the simcard. i cant activate my phone. even i put att simcard. how can i activate it? please help me. thanks.

    Apple recommends backing up the data when you're getting the battery replaced by them. So I assume that you will likely lose the data during this process.
    Will the data on my iPhone be preserved?
    No, during the service process all data on your iPhone will be erased. Before obtaining service, it is important to back up your data using iCloud or iTunes. Apple is not responsible for the loss of information while servicing your iPhone and does not offer any data transfer service. During service, Apple may exchange your iPhone with an iPhone that is new or equivalent to new in performance and reliability.
    Following service, your iPhone may have a newer operating system (iOS) version and you will need torestore your data using the method used to back it up (iCloud or iTunes). As a result, you may also need to update your App Store applications to ensure compatibility with the newer iOS. If you experience a problem with an application purchased from the App Store, check to see if an update is available or contact the application vendor directly.
    copied from Apple - Support - Service Answer Center

  • Turning Off The Alert - Notebook PC Battery Replacement Program Alert in Health Check.

    I want to turn off the Notebook PC Battery Replacement Program Alert in Health Check. It continues to alert me for months now. This is driving me batty since I have checked it 3 times and it is not included in the recall! I have a HP Pavillion dv6000 running Windows Vista Home Premium Edition. Any help to turn this darn alert off permanently would be very helpful. Thanks.

    Thank you to all who have read this post so far.  Please continue to contact HP directly using the above information.
    Matthew|Community Advocate | Best Buy® Corporate
    Visit our Channel on
     Private Message

  • An app charged my credit card and the way the app described payment options, I believed it would charge me a monthly fee, not a yearly fee. I'd like the charge refunded, how can I do that?

    An app charged my credit card and the way the app described payment options, I believed it would charge me a monthly fee, not a yearly fee. I'd like the charge refunded, how can I do that?

    You can Contact Apple for Refund by filling your personal Information in below link :
    http://www.apple.com/emea/support/itunes/contact.html
    Or You can directly Contact Apple Support Number and you will be routed to the concerned department.
    http://support.apple.com/kb/he57
    But its not 100% Guaranteed that they will issue a refund as per there Policy Terms.
    But in extreme cases they gives you a Refund for 1 time as an excepiton.

  • HT4623 I have followed the directions and my iphone is not installing the iOS 7.0.2.  My iphone is plugged into my lap top that has the most recent version of itunes.  It is a dsl connection.  Is that my problem?

    I have followed the directions and my iphone is not installing the iOS 7.0.2.  I have the most recent version of itunes on my laptop commuter.  my iphone is attached to my laptop via usb port.  The laptop uses dsl not wifi.  Is that my problem?

    Exactly what version of iTunes are you running? And DON'T say 'the latest version'... CHECK the version number. You need to be running 11.1 or higher.

Maybe you are looking for