Payment Wizard, bank branch number

Hi, I am a recent user and I would like to know how to include suppliers' bank branch numbers on the recommendation form and subsequent instruction to our house bank.

HI
If you seek to fetch any other information ont a fiels from some other field u need to use a FMS(Formated Search)
Regards
Manish

Similar Messages

  • Payment Wizard - Bank transfer problem

    Hi,
    In the Payment Wizard if I select the outgoing payment and payment means as check in step 2, The recommendation report in step in step 6 shows the Business Partners and transactions but if I select Bank Transfer as payment means then no Business Partner is displayed in the recommendation report, however the outgoing amount and total value are displayed at the bottom.
    The SAP Version is SAP Business One 8.8 SP:00 PL:08
    Any know issues in this version or am I missing some this. Any suggestions will be helpful.
    Thanks in Advance.
    Regards,
    Mohan

    Hi Mohan,
    PL08 is a little bit old. Try under new PL to see.
    Thanks,
    Gordon

  • Outgoing payment with Payment Wizard with Bank Transfer

    Hello to everyone !!!
    I'm Configuring a Company who want to use the 'Payment Wizard' to make Outgoing Bank Transfers payments with it.
    I did the configuration in 'Payment Methods' of Outgoing Bank Transfers, where I chose a File Format from the list (Even I don't know which one should I choose) and I also chose de 'House bank', bank and account where the Outgoing Bank Transfers will come.
    At the time when I did the payment wizard it suggest me to make an outgoing payment of my due A/P invoice very well. The problem is in the next step (STEP 7) when i run the execution and in STEP 8 it says:
    0 Payments were added
    0 Bank transfers were added
    So, It did not make any bank transfer Transaction!!!! =S
    Someone knows what i'm missing from the configuration???
    Someone knows if this is a bug??
    Thanks for your Help!!!!

    Hi Karina,
    please see the info from SAP Note 725786. The note is currently being updated with the new information relating to system behaviour in version 2007  & should be released again shortly:
    In order for the payment wizard and subsequently the payment engine to
    work properly, SAP Business One must be defined correctly as follows:
    1. Define the House Bank:
    a) Administration -> Setup -> Banking -> House Bank Accounts - Setup.
    b) Choose the Bank Code, Country and Account Number.
    c) If the business partner bank is a postoffice bank, tick the Post Office box.
    d) Update the window.
    e) Enter into the House Bank Account Setup winod again and enter the Branch and the account number of the corresponding G/L Account.
    f) Update the window.
    2. Define Business Partner bank:
    a) Administration -> Setup -> Banking -> Banks.
    b) Choose the Country Code, Bank Code and Bank Name, if necessary Swift number.
    c) If the business partner bank is a postoffice bank, tick the Post Office box.
    d) Update the window.
    3. Define Payment Methods:
    a) Administration -> Setup -> Banking -> Payment Methods.
    b) Enter the Payment Method Code, Description and the Transaction Type.
    c) Select the Payment Type and the Payment Means.
    d) In "File Format" choose the correct plug-in for the transaction (refer to the Payment Engine Online Help for the correct plug-in for the transaction you have defined).
    e) Select your House Bank for this particular payment method.
    f) Select the validation options and remember to tick Post Office Bank, if the bank is a Post Office Bank.
    g) If the outgoing payment is by cheque, restrictions can also be defined here.
    h) Add or update the window.
    4. Set up a Business Partner for the payment wizard:
    a) Business Partner -> Business Partner Master Data.
    b) Under the "Payment Terms" tab, enter the bank country.
    c) Enter the account number and the branch, update to return to Business Partner Master Data.
    d) Under the Tab "Payment system" tab, tick the desired Payment Method to include it in a payment run.
    e) Under the Tab "Payment system", select the house bank that was defined for the desired payment method used for transactions with this business partner.
    f) Update the window.
    5. Generate invoices for this business partner.
    6. Define the standards for the payment run:
    a) Banking -> Payment System -> Define Payment Run Defaults (In 2007 A version the path is: Administration -> Setup -> Banking -> Payment Run Defaults).
    b) Define tolerance days, cash discounts etc as needed.
    c) Define minimum and  maximum payments if necessary.
    d) Tick the box beside "Payment Methods".
    e) Click on the radiobutton beside "Payment Methods" and select the payment method(s) to be executed in this payment run by putting a tick in the tick box.
    f) Update the window.
    7. Open the Payment Wizard (Banking -> Payment System -> Payment Wizard).
    a) Select a new payment run - Step 1.
    b) Click on "Next" and define the Payment Run Name and the Posting Date, the payment type and the payment means - Step 2.
    c) Click on "Next" and select the business partners to be included in this payment run, make sure that the tick box for the relevant Business Partner Name is ticked - Step 3.
    d) Click on "Next" and define the document parameters - Step 4.
    e) Click on "Next" and select the payment method this payment run is applied to by ticking the box to the left of the payment method code - Step 5.
    f) Click on "Next" and tick the payment number for the business partner to be included, individual invoices can be selected by clicking on the "Expand All" button and either selected or deselected. This also applies to Credit Memos (and to manual Journal ENtries in 2007 A). Click on "Non-included Trans." to identify any troublesome transactions - Step 6.
    g) Select to either "Save the selection criteria", or "Mark as recommended" to process at a later point in time or select to "Execute" immediately - Step 7.
    h) In Step 8, you are given the Payments Run Summary.
    i) If you selected to execute the payment run, in Step 9 the Document and Report Printing options will be displayed. To generate the bankfile and any associated documents relevant to your localisation, click on the radiobutton "Bankfile".
    j) A "Browse for Folder" window will pop up where the destination directory of the output files must be selected. Once a folder was selected and "OK" was clicked, the payment engine will take the data out of Business One and create the defined files.
    k) Once the procedure has completed, an information system message will be displayed: Payment Engine run was successful"
    8. Go to the destination folder and check the logfile and the bank file(s).
    All the best,
    kerstin

  • Bank Reference Number in BAI format

    Hi,
    We are using BAI format for electronic Bank statment.
    In this format we had two reference numbers - Customer Reference number, Bank Reference number.
    Both these fields are updated in notes to payee fields. But is updated only upto 13 Characters, extra characters are truncated.
    Bank reference number is also updated in FEBEP-VGREF field.
    We want to clear incoming payments using Bank reference number.
    Any suggestion what we can do so that we can use Bank reference number as clearing base for incoming payments.
    We are not able to use interpretation algorithm 15, 901 since both looks for notes to payee field which has values only upto 13 characters.
    Thanks in advance....
    Anand Gupta

    Hi
    check the algorithm you are using in customization.  hope bank reference number is also available.
    Regards
    Ram

  • Cheque number missing *( payment wizard)

    Hi ,
               Before posting this question i let u know that im new to this B1.
    N my question is Using payment wizard im doing the out going payments and my payment is executing without any cheque numbers. I given the cheque number in the 'next cheque numb column'  in the house bank accnt, but its not taking and its not display the cheque number and the payment is getting executed.
    so, how can i get the cheque number too after the payment is succesfully executed.
    Thank you,
    Gokul.

    Hi,
    You can refer to Note No. : [903135|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=903135] your issue.
    Relevant portion from the Note for your reference :
    All the check numbers will automatically be entered as '0', i.e. the number is not assigned based on the "Next Check Number" field in the House Bank accounts definitions. The check will be saved with the number  '0' as long as it is not printed. The check will become valid just after printing.
    Regards,
    Jitin
    SAP Business One Forum Team

  • Payment Wizard - Export Bank File

    Hi Experts,
    I have been testing the Payment Wizard for my client to use when they have a batch of Suppliers to pay.
    But I seem to have a problem in Step 9 of 9.
    The payment wizard creates the payments but the Export Bank file tab does not want to export to any location that I select.
    Am I doing something wrong or leaving something out?
    My goal is to create and post all the payments in SAP, and then export that payment batch that I just executed in order to import into another application called Cashfocus.
    Thank you.
    Regards,

    Hi
    We have worked extensively with the Payment Engine and there are a number of things that may caused this problem. Can you confirm as to whether a path is selected on step 9 and that write access is granted to this path/folder.
    Regards
    Earl

  • Problem with creation of Bank Transfer file by standard Payment Wizard

    Hello,
    I am currently trying to check if the file created by the Payment Wizard is gathering the appropriate data for Bank transfer payment.
    All the steps of the wizard are undergone successfully. However, no file is created or updated.
    Do you have an idea of what would be related to this problem and what could be the solution ? All the bank and accounts information are in the database, so basically nothing is missing as for data.
    Is the path for the file location important ?
    Do I have to create the file before and with an appropriate format ?
    Thank you for your help !
    Francois

    Hi,
    First of all you need to verify that you have allocated a bank file format for the particular payment method. I assume that you have since you are able to successfully generate the payment run. Once you reach the last step which is step 9 of 9 where you are able to print reports carefully observe and locate the bank file icon to the bottom right of the screen. Once you click on that icon you will be able to select the output file location and need to complete the test run successfully whereafter you need to execute the production run. Once the production run has been completed the output file will have been generated.
    Regards,
    Andre

  • Payment wizard limits outgoing payments to balance in G/L bank account

    SAP B1 2005A Banking, Payment Wizard, Recommendation Report limits recommended invoices for payment to the balance in the G/L bank account. Is there a way to get around this limitation?
    It would be much better for our company if the Recommendation Report listed ALL invoices that meet the parameters we specified (Vendor # range, Vendor Group, Due Date, etc) then allow us to de-select individual invoices until the total of payments is below the G/L bank account balance.

    Sorry for the hurry answer without check.  The message on the screen clear says: Non-Included trans. displays rows for which a payment cannot be generated.
    This is system behavior.  I don't think there are any existing options other than try SDK.
    Thanks,
    Gordon

  • Payment wizard -No matching records found  'Bank Codes' (ODSC) (ODBC -2028)

    Hello dear experts,
    I'm trying to execute the payment wizard to receive a payment from a vendor
    The invoice appears in the recommendation report but the payment isn't added when i execute the payment run.
    It appears after that in the Non-Included transactions with the following error message :
    No matching records found  'Bank Codes' (ODSC) (ODBC -2028)
    Can you solve this problem?
    Thank you

    Hi,
    Could you find the followings regarding bank information and check if all the settings are correctly defined
    1. Define payment run defaults > Payment method
       Check payment method details from Administration > Setup > Banking
       > Define payment methods
       Payment method which is linked to BP > payment means - Bank transfer
    2. ODSC table, Bank Code (just to check bank codes are stored well)
    3. BP master data > Payment terms > BP Bank accounts
    4. BP master data > Payment system > House bank.
    Also Check Note no [971105|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0000971105].
    Regards
    VIkas
    SAP Business One Forums Team

  • Payment Process Request Status Report - unmask bank account number

    Dears,
    My requirement is to unmask bank account number in Payment Process Request Status Report (short code: IBY_FD_PPR_STATUS_PRT). It is possible to achieve?
    Thanks for any help and suggestions.
    Rgds,
    Marcin

    Sunil wrote:
    Guys,
    Can you please tell me what is the Data Definition name associated with Payment Process Request Status Report.
    Looking forward to your replies.
    Thanks.
    -SunilLogin to (XML Publisher Administrator) responsibility and click on Templates, query "Payment Process Request Status Report" and click on Go and this should show the "Data Definition". You can also click on "Payment Process Request Status Report" link and get all the details (Template Files, File name, Localized/Translatable Template ..etc).
    Thanks,
    Hussein

  • DRQ: Allow choosing correct Business Partner bank account in Payment Wizard

    Hello,
    This is a DRQ about the Payment process.
    It concerns the "Payment Wizard" functionality (Menu "Banking --> Payment Wizard") and the "manual outgoing payments" creation (Menu "Banking --> Outgoing Payment --> Outgoing payment").
    Version : 2007A SP00 PL38
    Description of requirements :
    In the current version of SBO ( 2007 SP00 PL38 ) when we create an outgoing payment with bank transfer as Payment method (manually or with the Payment Wizard), it is not possible to specify the Supplier "bank account" to use. The default bank account defined in the Supplier Master Data is automatically chosen by SAP B1.
    We can create several bank accounts in the Supplier Master Data, but it is not possible to use the non-default ones in the outgoing payments creation.
    Business needs:
    Some of our SAP B1 customers get suppliers with several bank accounts. They use the "Payment Engine" to generate "bank file" for bank transfer and forward the bank files to their banks and require to choose the correct bank accounts to use to pay each documents.
    The aim of the Payment Wizard is to help the SAP B1 customers to create regularly and automatically some outgoing payments.
    And when the Payment Wizard is run with several documents to pay on different supplier bank accounts for (for example AP Invoices to pay on different bank accounts for the same supplier), it does not work correctly because the bank account which is used in the "bank file" created at Step 9 of the "Payment Wizard" (by clicking the "Bank File" button added by the Payment Engine) is the default one.
    Current Workaround:
    To generate correct bank files, the SAP B1 user has to run several times the "Payment Wizard", modifying each times the default bank account of the supplier. The result is the creation of several "bank files"...
    and an important loss of time !
    Proposed solution:
    In the Payment Wizard, in Step 6/9, add a column which allow the user choosing the bank account (for example in a "choose from list" which display the existing bank accounts of the corresponding supplier) for each document to pay.
    The supplier default account is proposed by default but can be changed for each line.
    This column should be deactivated for other payment method than "Bank Transfer".
    This functionality should be interesting for manual outgoing payment because it should allow choosing the supplier bank account to pay on and recording this bank account information in the manual outgoing payment. In that way it will be possible to print the bak account information on the printed forms (PLD) we can print and send by fax to the bank.
    Kind Regards.
    Grégory

    Hi Grégory
    I have encountered the same problem: The payment wizard always suggests the supplier's standard bank account, irrespective of the information entered on the logistics tab in the pay to field of the AP Invoice. Unlike the solution you proposed (choose from list), I would prefer the payment wizard to automatically select the bank entered in the pay to field of the AP Invoice.
    Best regards
    Christiane

  • Payment wizard, Invoice devided on more than one bank

    Dear Ladies and Gentlemen,
    our costumer has the following problem:
    By using the payment wizard for creditors you have the possibility to choose banks from which the payments will be transferred. This happens in step 5 of 9.
    You can insert the desired amount of every bank and choose the order of the banks by using arrows:
    For Example: The costumer has a credit of 10.000 u20AC from bank1, from bank2 he has a credit of 20.000 u20AC, on bank3 there is no credit and on bank4 he has 1.000.000 u20AC credit.
    The costumer wants to use now the credit from bank1 and 3 first now, of course not the bank2 and for the rest of the payment he wants to use the bank4.
    To transact like this the relevant amounts are included and the sequence bank1-bank2-bank4 is chosen (bank3 is not ticked). In step 6 of 9 the open items of all deliverers will be displayed.
    The payment method for every invoice was already calculated by Business One. In this step some invoices are excluded which should not be payed because of different reasons.
    Now the problem occurs: After excluding some invoices there is no new calculation which invoice should be payed from which bank. That means that if the invoices which were put out of the system occasionally had the payment terms bank1 or 2 the payment of this two banks (which was 10.000 u20AC and 20.000 u20AC) is now reduced. The amount of the reduction is the amount of the excluded invoices.
    Our costumer wants following:
    The distribution of the payment should be only done when the open items were controlled ( maybe some invoices are excluded here).
    If you want to use the credits on the banks completely you only have the possibility to create a payment separate for all banks.
    That means triple effort for this example.
    Thanks for your help
    Kind Regards
    Christian Dohmgoergen

    Duplicate post ..
    Re: Installing MW on different machines.

  • Payment Wizard - Execution of payment wizard with no BP Bank

    Hi Experts!
    Follow the explanation of my necessities on Payment Wizard process.
    When occurs the 'Go Live' procedures on my database, the inicial balances was imputed with JOURNAL ENTRIES, generating a lot of incoming payments. Now I need to realize a confirmation of receipt of these incoming payments. All receipts realized was occured on money cash.
    I was trying to use the PAYMENT WIZARD. I realized all configurations and criteria to the process but appears a message:
    "No matching records found 'Bank Codes' OSDC"
    In other discussions on SCN I discover that I need to insert the banks of customer on BUSINESS PARTNER MASTER DATA > PAYMENT TERMS > BUSINESS PARTNER BANK, to realize the process with succesfull.
    But I have a big problem with it: My customers not have bank information. All the transactions on my database occurs in money cash, need not conduct banking transactions.
    I need to use the PAYMENT WIZARD without insert bank information on BP. Is there any way to do this process?
    Thanks in advance for your attention!
    Leandro Martins
    B1 Process Consultant
    [email protected]
    www.updatesolution.com.br

    Hi Leandro,
    Please check below link.
    How to Use the Payment Wizard in SAP Business One.mp4 - YouTube
    https://help.sap.com/saphelp_sbo882/helpdata/en/45/0a572f37ca1f2ce10000000a1553f6/content.htm
    Hope this helps
    Regards::::
    Atul Chakraborty

  • Payment Wizard error: 'No matching records found  'Bank Codes' (ODSC) (ODBC -2028)'

    Hi Experts,
    I am running a Payment Wizard for a Bank Transfer for a certain vendor, however I get the error "No matching records found  'Bank Codes' (ODSC) (ODBC -2028)".
    I already checked my Bank settings and payment method settings but I still get the error.
    I checked SAP Note 1980507 but the scenario should be without bank details in the BP payment terms tab. But in my case, its defined yet I get the same error as reported.
    Any help would be appreciated.
    Thanks,
    Don

    Hi,
    Please check whether following setup done for payment wizard.
    725786
    - Definitions necessary for the payment wizard
    Thanks & Regards,
    Nagarajan

  • Can we display the bank account number of a vendor in the payment list(APP)

    Hi Experts,
    After APP run ,when i dispaly  the payment list there exist the vendor adress details but no bank account number of vendor !
    Please confirm whether vendors bank account number can be displayed in the payment list or not?
    Note:- 1.I use programme RFZALI20 to dispaly payment list . 2. In the vendor's master data the bank account number is already maintained.
    Points will be rewarded.
    Regards,
    Ramakanta

    Hi Suresh,
    Thanks for your quick response.
    How can i dispaly the DME file ?
    As i mentioned to dispaly payment list use programme RFZALI20.
    I checked the configuration and found that payment programme RFFOUS_C is assigned against payment method "C" in the country setting.
    Note:-  We have 8 (eight payment methods) but "RFFOUS_C" is assigned only agaisnt payment method "C" (check) not against any other payment methods.
    We have a payment method "G"(Empl Payment method) and against this payment method the bank account number of vendor is displaying but not against any other payment method.
    I am confused...please help me.
    Regards,
    Ramakanta

Maybe you are looking for