Payments not being processed by my bank

Hello, Recently I got a new chequing account at CIBC, and linked it to my PayPal. However, when I make a payment it shows up on PayPal but does not process through my bank account. Therefore, I have a negative account balance now. Regarding how I verified my bank account I used my debit card linked to it to verify it. I feel this is what may be causing the issue and I probably should of verified it with the two deposits instead. Furthermore, I cannot remove my bank account or cards due to my negative balance, but I have made a request to withdraw funds from my bank account to restore my negative balance to 0 which I feel won't work out in the end. Lastly, I contacted PayPal regarding this but they just have an automated system and no customer repsentatives to help me, so I'm really stumped now. Any help on this would be greatly appreciated.. thanks.

When you add a bank account you get sent the 4 digit code to verify it, if you did not do that then you can't use your bank account. Adding a card does not verify your bank account so go and get the code from your statement and finish the process. As for your neg balance then >>> Ways to clear a negative balance.
1. Transfer funds from your bank account via "add funds" if you choose the faster method it should be done quickly.
2. Get a mate or family member to send you a payment to your paypal via the friends / family option (as long as they don't fund it with a card there is no fee).
3. Via a card over the phone with paypal.

Similar Messages

"Payment is being processed" for over 15 minutes

I Signed up for PS CC and entered all my payment info but the "your payment is being processed" screen has been running for 10-15 minutes now. Not sure what to do?

Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Stuck on "Your payment is being processed."

I'm trying to purchase Adobe Photoshop CC paying on a month by month basis, I'm a student and have filled out all the forms correctly and have provided my Visa debit card information and it is stuck on "Your payment is being processed." - I started this nearly 20 minutes ago and it still says the same message :
Your payment is being processed.
This may take a few minutes. Please do not click back or reload this page to avoid duplicating your purchase.
I closed the page because it was taking too long.
I want to purchase Photoshop CC but how can I ?

Have you tried changing the browser, there can be internet issues too.
I hope by now the payment has gone through, if you have still not purchased CC, please contact Adobe support for purchase http://adobe.ly/yxj0t6
Regards
Rajshree

"Your payment is being processed"?

I cannot get beyond the "Your payment is being processed" on a student cloud order which sits for 50 minutes. I have no way of getting in touch with Adobe because I've not yet managed to upgrade; is the site just down?

I'm experiencing a similar problem. 157 others have viewed this question. Any answers?
How long do I have to wait? (Internet connection is good)
Did anyone wait for a similar amount of time and have success?

Popularity trend/usage report is not working in sp2013. Data was not being processed to EVENT STORE folder which was present under the Analytics_GUID folder.

Hi
I am working in a sharepoint migration project. We have migrated one SharePoint project from moss2007 to sp2013. Issue is when we are clicking on Popularity trend > usage report, it is throwing an error.
Issue: The data was not being processed to EVENT STORE folder which was present under the
Analytics_GUID folder. Also data was not present in the Analytical Store database.
In log viewer I have found the bellow error.
HIGH -
SearchServiceApplicationProxy::GetAnalyticsEventTypeDefinitions--Error occured: System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly
secured fault was received from the other party.
UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
HIGH - Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly secured fault was received from the other party.
CRITICAL - A failure was reported when trying to invoke a service application:
EndpointFailure Process Name: w3wp Process ID: 13960 AppDomain Name: /LM/W3SVC/767692721/ROOT-1-130480636828071139 AppDomain ID: 2 Service Application Uri: urn:schemas-microsoft-
UNEXPECTED - Could not retrieve analytics event definitions for
https://XXX System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
I have verified few things in server which are mentioned below
Two timer jobs (Microsoft SharePoint Foundation Usage Data Processing, Microsoft SharePoint Foundation Usage Data Import) are running fine.
APPFabric Caching service has been started.
Analytics_GUID folder has been
shared with
WSS_ADMIN_WPG and WSS_WPG and Read/Write access was granted
.usage files are getting created and also the temporary(.tmp) file has been created.
uasage logging database for uasage data being transported. The data is available.
Please provide pointers on what needs to be done.

Hi Nabhendu,
According to your description, my understanding is that you could not use popularity trend after you migrated SharePoint 2007 to SharePoint 2013.
In SharePoint 2013, the analytics functionality is a part of the search component. There is an article for troubleshooting SharePoint 2013 Web Analytics, please take a look at:
Troubleshooting SharePoint 2013 Web Analytics
http://blog.fpweb.net/troubleshooting-sharepoint-2013-web-analytics/#.U8NyA_kabp4
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Change to rules provisioning not being processed

I updated a import rules extension, but the change is not being processed when the MA runs.
Example: mventry["attribute"].Value = "A";
Changed to: mventry["attribute"].Value = "B";
Run full sync, the value remains A. New accounts also continue to get "A". Disable/enable metaverse rules extensions under options, no difference.
Any ideas?

Rules Extension dll has to be replaced in the extension folder. Typically the FIM Sync Service picks up the new dll "on the fly", but if replaced with new dll and no effect is showing [PS] Restart-Service FIMSynchronizationService makes sure the
new dll is loaded.
Metaverse Rules extension has nothing to do with advanced Import Rules.

Stuck on the 'payment is being processed' page for the creative Cloud

I have a similar situation here in Finland as CatherineWJ: I've been stuck on the same 'payment is being processed' page with the rotating logo for. I have been waiting for 3 hours. What can I do?

Hi Puksu
I thought I'd let you know that I eventually managed to speak to someone via the LiveChat service which I found here: http://www.adobe.com/support/download-install/supportinfo/ (be prepared for a bit of a wait before they actually get to you though). They were able to look into my account using the info I entered, and informed me that my payment had now processed and I should close the payment processing window. I did that and I have now downloaded the Creative Cloud and haven't had any issues yet.
Obviously I wouldn't advise closing the window without speaking to someone from Adobe first...!
Good luck x

Stuck on the 'payment is being processed' page for Creative Cloud

I've been stuck on the same 'payment is being processed' page with the rotating logo for about 45 minutes while trying to start my Creative Cloud membership. I'm in the UK and being Sunday afternoon the customer support helpline is closed until tomorrow morning. I'm also waiting to speak to a LiveChat operator but the wait is ridiculous - 11 messages so far telling me how many people are in front of me. Anyway - is there some way to find out what has gone wrong, and how I can get out of the page or refresh this pruchase without duplicating my order?
Thank you.

Im also in UK. Same thing happened to me. I have a tight deadline, but it seems I just simply cannot buy the subscription.

Messages not being processed

Hi,
I experience an issue with 10g soa, about not having processed some messages sent to receive activities of my process.
I have my process deployed, I can initiate the instance of the process, I can move the flow of the process by calling some receive activities, but sometimes it seems it stucks on one of these receives. It happens randomly on various processes on various receive activities, like one day one receive operation doesn't proceed at all, and on another day it is another receive operation, and that is without any change to the process and redeployment.
I can see the message has been received by server, because I can query it from DLV_MESSAGE table from BPEL data source, and i see its STATE = 0, which is unprocessed. I am also sure that message has valid content and the correlation bits on the message are also correct, really there is no reason why such message should not be processed, it always worked until the moment it decides not to for unknown reason.
My question:
1. What causes messages to be not processed?
2. What are known options to deal with this situation?
Currently I am in a condition where I can spot unprocessed messages, which is fine, so I am aware of the problem, but I am not able to deal with the problem. Even if I tried to submit the message via BPEL Console, it was not processed either.
Thank you for any suggestions

Some blog information to support this case
http://soacrux.blogspot.com/2010/08/automatic-recovery-program-for-pending.html
Content repaste:
Automatic recovery program for pending BPEL call back messages
BPEL engine maintains all async call back messages into database table called dlv_message. You can see such all messages in BPEL console call-back manual recovery area.The query being used by bpel console is joined on dlv_message and work_item tables.This query simply picks up all call back messages which are undelivered and have not been modified with in certain threshold time.
Call-back messages are processed in following steps
BPEL engine assigns the call-back message to delivery service
Delivery service saves the message into dlv_message table with state 'UNDELIVERED-0'
Delivery service schedules a dispatcher thread to process message asynchronously
Dispatcher thread enqueues message into JMS queue
Message is picked up by MDB
MDB delivers the message to actual BPEL process waiting for call-back and changes state to 'HANDLED=2'
So given above steps, there is always possibility that message is available in dlv_message table but MDB is failed in delivering it to BPEL process which keeps message always in state= 0.
Following program can be tailored to suite one's own requirements to recover from such state-0 messages.
Note:- This program contains logic to recover from invocation and call-back messages. Please comment out appropriately.
package bpelrecovery;
import com.oracle.bpel.client.*;
import com.oracle.bpel.client.util.SQLDefs;
import com.oracle.bpel.client.util.WhereCondition;
import java.util.ArrayList;
import java.util.Hashtable;
import java.util.List;
import javax.naming.Context;
public class bpelrecovery {
public bpelrecovery() {
public static void main(String[] args) {
bpelrecovery recover = new bpelrecovery();
String rtc = "";
try{
rtc = recover.doRecover();
catch (Exception e){
e.printStackTrace();
rivate void recoverCallbackMessages(List messages)
throws Exception
String messageGuids[] = new String[messages.size()];
for(int i = 0; i < messages.size(); i++)
ICallbackMetaData callbackMetadata = (ICallbackMetaData)messages.get(i);
String messageGuid = callbackMetadata.getMessageGUID();
messageGuids[i] = messageGuid;
System.err.println((new StringBuilder()).append("recovering callback message =
").append(messageGuids).append(" process
[").append(callbackMetadata.getProcessId()).append("(").append(callbackMetadata.getRevisionTag()).ap
pend(")] domain [").append(callbackMetadata.getDomainId()).append("]").toString());
Locator locator = getLocator();
IBPELDomainHandle domainHandle = locator.lookupDomain();
domainHandle.recoverCallbackMessages(messageGuids);
public String doRecover() throws Exception{
// Connect to domain "default"
try{
System.out.println("doRecover() instantiating locator...");
Locator locator = getLocator();
System.out.println("doRecover() instantiated locator for domain " +
locator.lookupDomain().getDomainId());
// look for Invoke messages in need of recovery
StringBuffer buf1 = new StringBuffer();
WhereCondition where = new WhereCondition(buf1.append(SQLDefs.IM_state).append( " = "
).append(IDeliveryConstants.STATE_UNRESOLVED ).toString() );
System.out.println("doRecover() instantiating IInvokeMetaData... with where = "+ where.getClause());
IInvokeMetaData imd1[] = locator.listInvokeMessages(where);
System.out.println("doRecover() instantiated IInvokeMetaData");
// iterate thru the list
List l1 = new ArrayList();
for (Object o:imd1){
l1.add(o);
// See how many INVOKES are in the recovery zone
System.out.println("doRecover() instantiated IInvokeMetaData size = " +l1.size());
// look for Callback messages in need of recovery
StringBuffer buf = new StringBuffer();
where = new WhereCondition(buf.append(SQLDefs.DM_state).append( " = "
).append(IDeliveryConstants.TYPE_callback_soap ).toString() );
System.out.println("doRecover() instantiating ICallbackMetaData... with where = "+
where.getClause());
ICallbackMetaData imd[] = locator.listCallbackMessages(where);
System.out.println("doRecover() instantiated ICallbackMetaData");
// recover
List l = new ArrayList();
for (Object o:imd){
l.add(o);
recoverCallbackMessages(l);
catch (Exception e){
e.printStackTrace();
return "done";
public Locator getLocator(){
System.out.println("getLocator() start");
Locator locator = null;
// set JNDI properties for BPEL lookup
String jndiProviderUrl = "opmn:ormi://localhost:6003:oc4j_soa/orabpel";
String jndiFactory = "com.evermind.server.rmi.RMIInitialContextFactory";
String jndiUsername = "oc4jadmin";
String jndiPassword = "welcome1";
Hashtable jndi = new Hashtable();
jndi.put(Context.PROVIDER_URL, jndiProviderUrl);
jndi.put(Context.INITIAL_CONTEXT_FACTORY, jndiFactory);
jndi.put(Context.SECURITY_PRINCIPAL, jndiUsername);
jndi.put(Context.SECURITY_CREDENTIALS, jndiPassword);
jndi.put("dedicated.connection", "true");
try{
System.out.println("getLocator() instantiating locator...");
locator = new Locator("default", "welcome1", jndi);
System.out.println("getLocator() instantiated locator");
catch (Exception e){
System.out.println("getLocator() error");
e.printStackTrace();
return locator;

Delivery note Being processed

Dear All,
Could you please advice me why In my some Delivery note status is showing "Being processed"?
But status "Completed" is showing in Invoice, Accounting document and sales order.
Pls help me.
Tks and B.Rgds
Bishnu

Hi Bishnu,
Please check status of each item in delivery note item data and note the item which has status being processed. If the item with status being processed is not billed then answer is straight forward, you need to bill that item.
If all the items are billed and still one of the item has status being processed, then reason could be one of the dimensions (weight, volume etc.) of material are changed in master data after delivery and before invoicing. If your case is later please refer to SAP notes or write back to me.
Thanks
Murali

Applications not being processed in CustomSettings.ini or missing from ZTIApplications

Using MDT 2012 Update 1 and started having a weird issue where MandatoryApplications properties are being skipped over during the deployment process.
CustomSettings.ini is configured to process [Default] first, followed by model specific subsections for fixing up minor things that are specific to that model. There are MandatoryApplications settings under each subsection, and it ends up looking similar
to this...
[Settings]
Priority=Default, Model
[Default]
MandatoryApplications001={f3389f14-6071-414b-b989-08e35cf82f27}
[HP EliteBook 840 G1]
MandatoryApplications002={d13e2dc4-3b27-4173-b143-30b5f57d7e53}
Applications defined under [Default] install just fine, but nothing under the model subsections installs. No errors, also.
BDD.log shows...
------ Processing the [DEFAULT] section ------ ZTIGather 4/17/2014 9:48:41 AM 0 (0x0000)
Property MANDATORYAPPLICATIONS001 is now = {f3389f14-6071-414b-b989-08e35cf82f27} ZTIGather 4/17/2014 9:48:42 AM 0 (0x0000)
Added value from [DEFAULT]: MANDATORYAPPLICATIONS = {f3389f14-6071-414b-b989-08e35cf82f27} ZTIGather 4/17/2014 9:48:42 AM 0 (0x0000)
------ Processing the [HP EliteBook 840 G1] section ------ ZTIGather 4/17/2014 9:48:42 AM 0 (0x0000)
------ Done processing \\Server\ProductionShare$\Control\CustomSettings.ini ------ ZTIGather 4/17/2014 9:48:43 AM 0 (0x0000)
ZTIApplications.log shows...
Microsoft Deployment Toolkit version: 6.1.2373.0 ZTIApplications 4/17/2014 10:06:35 AM 0 (0x0000)
The task sequencer log is located at C:\Users\ADMINI~1\AppData\Local\Temp\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. ZTIApplications 4/17/2014 10:06:35 AM 0 (0x0000)
Write all logging text to \\Server\productionshare$\logs ZTIApplications 4/17/2014 10:06:35 AM 0 (0x0000)
Validating connection to \\Server\productionshare$\logs ZTIApplications 4/17/2014 10:06:35 AM 0 (0x0000)
Already connected to server Server as that is where this script is running from. ZTIApplications 4/17/2014 10:06:35 AM 0 (0x0000)
Language/Locale Identified (in order of precedence): 1033,0409,0x0409,9,0009,0x0009 ZTIApplications 4/17/2014 10:06:35 AM 0 (0x0000)
Processing Application Type: MandatoryApplications ZTIApplications 4/17/2014 10:06:35 AM 0 (0x0000)
Ready to install applications: ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
################ ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Entry: {f3389f14-6071-414b-b989-08e35cf82f27} ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Name: SysConfigs ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
################ ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Using a local or mapped drive, no connection is required. ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Change directory: Z:\Applications\SysConfigs ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Run Command: \\Server\ProductionShare$\Tools\X64\bddrun.exe sysconfigs.bat ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
ZTI installing application ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Event 41031 sent: ZTI installing application ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
About to run command: \\Server\ProductionShare$\Tools\X64\bddrun.exe sysconfigs.bat ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Command has been started (process ID 3624) ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Return code from command = 0 ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Application SysConfigs installed successfully ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Event 41033 sent: Application SysConfigs installed successfully ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Property InstalledApplications001 is now = {f3389f14-6071-414b-b989-08e35cf82f27} ZTIApplications 4/17/2014 10:06:36 AM 0 (0x0000)
Processing Application Type: Applications ZTIApplications 4/17/2014 10:06:37 AM 0 (0x0000)
Application List is empty, exiting ZTIApplications.wsf ZTIApplications 4/17/2014 10:06:37 AM 0 (0x0000)
ZTIApplications processing completed successfully. ZTIApplications 4/17/2014 10:06:37 AM 0 (0x0000)
Event 41001 sent: ZTIApplications processing completed successfully. ZTIApplications 4/17/2014 10:06:37 AM 0 (0x0000)
So it ends up looking like the Applications List is not being properly populated, or something is just not processing CustomSettings.ini correctly. I've double-checked that the applications are hidden and enabled on the share, and have deleted/recreated
the applications on the share.
Anyone have any ideas?

For each section in your CS.ini, start your applications list with 001, like this :
[Settings]
Priority=Default, Model
[Default]
MandatoryApplications001={f3389f14-6071-414b-b989-08e35cf82f27}
[HP EliteBook 840 G1]
MandatoryApplications001={d13e2dc4-3b27-4173-b143-30b5f57d7e53}

Delays not being processed by reverb...

I have numerous patches that are going -- as a send not a channel insert -- to a delay, then as a send to a reverb. The original live playing goes through the reverb, but the delayed notes do not. Why is this? Do I need to have them as channel inserts instead? I prefer them as sends to keep CPU use down. Thanks.

When you add a bank account you get sent the 4 digit code to verify it, if you did not do that then you can't use your bank account. Adding a card does not verify your bank account so go and get the code from your statement and finish the process. As for your neg balance then >>> Ways to clear a negative balance.
1. Transfer funds from your bank account via "add funds" if you choose the faster method it should be done quickly.
2. Get a mate or family member to send you a payment to your paypal via the friends / family option (as long as they don't fund it with a card there is no fee).
3. Via a card over the phone with paypal.

IMAP alerts not being processed?

I recently went near storage quota on my IMAP account (they use CIRUS server software) and the server sent notifications via the IMAP alert facility. These were not processed by the iPhone or Mavericks Mail. As a result the account went over quota which caused emails to be bounced and the mail clients apparently cannot expunge messages when in this state (nor display the trash folder). The vendor's webmail does... but thats worthless to us day to day.
We noticed an issue when there wasn't any new emails in a day.
Anyway that's what the email vendor is telling me. Are there any vendors still providing a IMAP service that has less issues with Apple mail apps? Seems that, beside this issue, the current one works fine. Are there any that will also send warning emails in addition to the IMAP Alerts?
Perhaps there is a mail configuration item not set properly?
Thanks

I guess I should be careful what I ask for. It turns out numerous clients now block or do not process IMAP alerts because they are extremely annoying and are worse than not using them. Perhaps a violation of a standard but seems to be a much more user friendly approach when coupled with email status messages:
"The warnings are displayed obtrusively by standard. This is most harmful when doing a seach of the entire mail account: the warning is issued every time the mail client enters a new folder, and thus one has to guard the computer as it goes through the dozens of folders, being there to 'ok' moving to each of the folders. The standard specify explicitly that the application must wait the user to confirm they have understood the warning, before the client can do anything. "
Those using TB have been complained for years:
"This is insanse. The issue has been discussed for 5+ years now and STILL the popups appear and makes it impossible to use TB after an arbitrary level of use of the IMAP server. I read the same IMAP mail from Apple Mail and I dont get spammed by these idioitc warnings. "

Payments not being accepted?

Hi People,
Got a message a couple of days ago indicating that there was problem with my account. I checked it and no changes have been made to it for some months. If I read my account pages correctly, there appears to have been a payment made on the 21st November, but now I'm getting mesages that there are only 24 days to go before our subscriptin ends.
Is there a problem with Adobe payments at the moment?
I have tried using the help desk number and am always put on hold - currently at over 14 minutes.
Come on Adobe.
Sort this out please.
Andrew

The payment portal says that the payment could not go through, please contact your Bank regarding this & then contact Adobe Support .
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN
http://adobe.ly/yxj0t6
Regards
Rajshree

IFS Queue Items Not Being Processed After Restarting BPEL PM

This issues mentioned in the CS custom workflow development guide, but the solution mentioned(restarting BPEL PM) does not work.
If I have to restart the process manager, and I have restarted it several times due to outofmemory errors, the queue just continues to build in the IFSQUEUE and none of the custom workflow requests are processed.
The only workaround I have found is to redeploy each custom workflow. This is obviously unacceptable in a production environment.
Anyone have any ideas?

Can you please provide more details of the OutofMemory Errors that you see in BPEL ? This is more of a AQ adapter problem than anything else. The log file to track the information would be under $ORACLE_HOME/integration/orabpel/domains/default/logs [where ORACLE_HOME is that of BPEL PM installation]. You can increase the log level of all the components from BPELConsole. Click on the Manage BPEL Domain -->Logging and update the logging level to debug.
Hope this helps,
Ravikiran.

Payments not being processed by my bank

Similar Messages

Maybe you are looking for