PayPal auto-recharge fails even though manual paym...

Hello,
Every month my PayPal auto-recharge fails. I go into my account, make a manual payment using PayPal, and set up auto-recharge. Then auto-recharge fails.
I have talked to Skype customer support about this more times than I can remeber. The conversation always ends up with them explaining to me how auto-recharge works and listing the same possible reasons for failure that I get in the error email.
Does anyone an idea why this would be?
And please note: My PayPal account is fine. It works every time for manual recharge. Every time. It only fails for auto-recharge. Same account, same credit card. Every time.
Thank you in advance for your help

Raymondwu wrote:
Hi. My skype account has auto-recharged (through a linked paypal account) 13 times today (5/9/13) for 10 euros each time, even though I did not even login. I am guessing that my account has been hacked and then someone has made calls that incurred charges (see below) so that it would auto-recharge. Could you please look into the history of how this credit was used/transferred and whether any of it can be recovered? I am now down 130 euros and I did not make any of the calls, nor did I explicity authorize the payments.
Cheers,
Ray
You may need to contact customer service for clarifications regarding those charges, and for further assistance;
http://community.skype.com/t5/General-Discussion/How-to-Contact-Skype-Customer-Service/m-p/431911
For the meantime, it may also be advisable to run a full antivirus scan using a fully updated antivirus software, then change your account password as a safety net (just in case your account was indeed hacked/compromised).
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

Similar Messages

AND Process failing even though its prior processes are green

Hi Experts,
I have an issue with AND process .The AND process is failing even though its prior processes have finished sucessfully and have become green in the process chain.
Can any one please help out on this issue.
Thanks
SHASHI

Hi........
U copy the rest of the chain.........
Open the chain through RSPC1...........it will directly open the chain in Planning view.........bcoz to copy a chain u hav to open the chain in Planning view.......in the top where we write tcode.............write COPY there.........or ......in the top Process chain tab >> Copy.........Give the chain name..............remove all the processse till the AND process...........remember remove the Start process also...since Start proces is always unique..........and set the the condition as immediate.........then schedule the chain.........
And to fix the issue permanently...........deschedule the chain..and then again schedule it back......
Regards,
Debjani......

Tried to download Mountain Lion 10.8 upgrade but it failed even though my card has been charged

I tried to download Mountain Lion upgrade from Lion but it failed even though my card has been charged

http://www.apple.com/support/mac/app-store/contact.html?form=account

TS1424 I had purchased a VIP subscription in starmakerstudios karaoke for a week. I don't know how to stop auto renewal. Even though I have deleted the app I am still being charged

Hey people please help me with my problem.
I purchased a VIP subscription for a week in starmakerstudios karaoke. I don't know how to stop auto renewal. Even though I have deleted the app, I'm still being charged $1.99 a week!
Please help me out...

Hi Gerald,
Well, you're not alone. The question is why is this happening? Since the referenced link shows the same type of problem with Yahoo finance, I suspect there is a coding problem on the site, specific to how Firefox is reading the code. Not being a programmer, I can't offer specific advice other than contacting either Firefox through their Community forum, or Yahoo Finance.

Time Machine Backup Failed even though I still have 1.9TB of a 2TB Time Capsule. I am using Yosemite.

Time Machine Backup Failed even though I still have 1.9TB of a 2TB Time Capsule. I am using Yosemite 10.10.3 on an iMac (mid 2010)

The recent update in Yosemite (10.10.3) is causing some issues for some users.
Try a complete network power cycle as follows:
Power off each and every device on your network......modem, Time Capsule, computers, printers, etc......in any order that you want
Wait a minute
Power up the modem and let it run 2-3 minutes
Then, power up the next device that is connected to the modem an let it run a full minute
Then, continue to power up devices one at a time about a minute apart until everything is back up
Check the network
Wait for a backup to occur and report on your results

DateField Validate Failed: Even though the date format is good.

Hello All,
I have certain date fields on the form, I put the Display format as "MM/DD/YYYY" and also specified the same format for Validation.
Even though the data which gets populated pertains to the same format(MM/DD/YYYY), even then the validation pop-up appears saying that "DateField Validation Failed"
I am not sure whether there is a known issue on the Designer or there is something I am missing.
Please help me in this.
Thanks in advance
Sivajee.

Hello all,
I happened to solve this issue. The thing is, I defined some more custom validation functions on these date fields, apart from the Validation Pattern. Once I remove those custom validation functions, this issue got resolved.
Just thought of sharing the resolution, thinking that someone may face the same issue.

Shockwave Player 12.0.7.148 prompts for an auto update. Even though Auto Update is disabled.

We have been re-packaging Adobe Shockwave Player 12.0.7.148. Application is prompting to upgrade new version i.e. auto update even though auto update functionality is disabled. Can any one please help in this? When we right click on shockwave frame over an internet page and check the properties, we can see an Autoupdate is supress.
Thanks for your return.

Thank you for your reply. Like I said in my post, I have been having this issue since the summer of 2011, when I was still using regular firefox. In fact, I had made the switch to Aurora in the hopes that this would be solved, given the ongoing changes to the update process. Going back to regular Firefox, which seems to be your only suggestion, would therefore not solve my problem, and it would rob me of the opportunity to enjoy and give feedback on other new features.
In addition, like I said in my original post, I have tried several of the most common ways of dealing with such issues, to no avail. After an extensive search, I also couldn't find anybody else with this bug. That is why I turned to this support forum. If you know of a way this problem could be solved, I would very much appreciate it.

Why does my connection to Apple store constantly fail even though I have good internet connectivity to all non-apple apps?

Hi.
All of a sudden my IOS devices are having difficulty accessing all of my Apple-store controlled apps and purchases when using my home network, even though it is a really fast network and my other devices work perfectly. Spotify, YouTube and Netflix and all apps that don't rely on Apple purchases are working perfectly on my iPad and ipod, and I have fast internet speed and perfect connectivity on all my other devices.
But when I go to Newsstand or iTunes Store for example I get the message 'can't connect to Apple server' or 'you are not connected to wifi' even though all non-Apple apps are connecting perfectly on the same device. I have tried all the usual reboot, reset solutions and nothing seems to resolve this. My software is up to date. My iPod and iPad are working perfectly when I use another network. My home network is working perfectly for everything else.
Any ideas?

Sorry for bad English and typos, I wrote it quickly.

HT1338 Trying to reinstall hp LaserJet P2035n fails even though Apple says software available.

When I upgraded my Mac Pro to Lion a feature of my LaserJet P2035n went away. The feature was the ability to do manual double sided printing. The feature showed on the printer page but was always greyed out. I have noticed that a recent Mac OS software update included new software for HP printers so I thought I would remove my printer and reinstall hopefully bringing back the lost feature via a new driver.
The printer setup page sees the printer and says Apple has software for it saying "Software for this printer is available from Apple. Would you like to download and install it?" to which I sayd "Download & Install". A new popup window says "Finding Software" then gives me an alert popup saying "The software for this printer is currently unavailable. Please contact the printer's manufacturer for the latest software."
I researched the problem a bit and do find a directory "/Library/Printers/hp/laserjet/P2030Series" there but apparently the installation process won't use it.
BTW I'm running OS 10.7.5 and there are no software updates pending.
Further info: I had similar problems when switching to Lion on our three Macs. We have a Lexmark and Brother printer that wouldn't install under Lion. At the time we called Lexmark and Brother and they each provided a script to completely delete all their software after which I could re-install the printers. HP has not been so helpful.
I'm assuming that the install is failing either due to a permissions problem or something else blocking the installation. Has anyone on this list dealt with the problem and have a solution.
Thanks in advance.
SeaJack16

Futher information: I moved the directory /Library/Printers/hp to Unknown and tried a re-install. It took longer to fail but did fail the same way. Looking in the directory it looks like the driver package is incomplete. To me it means that Apple does have the driver package, it just won't completely install because something is blocking it. The question seems to be, what is that something?

Printer Utility says Stopped and failed even though it works other times

I have the Photosmart C4599. All I did was get a new wireless router. I hooked it up and the printer sees it fine. I did the wireless test and it worked fine. I am on a Mac and the print and Fax under system prefrences sees it fine.
When I try and print from Word or PDF or whatever it acts like it about to print but in the utility it just says the job is stopped. When I try to resume it doesn't do anything and won't ever print. After clicking around many times I got it to say it failed. I have updated and reinstalled all drivers and set up. It knows it's there but just won't print.
Any suggestions? Thanks in advance

Delete and re-add the printer in the print queue:
- Sys Prefs, Print & Fax
- Select the printer in question and click the minus sign at the bottom of the list
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
If this does not work, do the same thing, only instead of the second step, right (control) click the print queue area and select Reset Printing System.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

SendAndLoad fails even though it is permitted (very weird)

Hi!
I have to deal with a very weird XML.sendAndLoad error. Maybe
some of you guys know an answer!
I implemented an AJAX adapter in Flash to allow crossdomain
AJAX interaction - and it works fine in general! Except it is
loaded from one special server, then it fails without any reason. I
digged into this for hours but I was not able to find a reason.
To find the reason I added several traces and activated every
logging option in mm.cfg. Here some data:
mm.cfg:
ErrorReportingEnable = 1
MaxWarnings = 500
TraceOutputFileEnable = 1
SecurityDialogReportingEnable = 1
PolicyFileLog=1
PolicyFileLogAppend=1
Traces when the adapter is loaded from
http://www.dental.pitt.edu/informatics/contactmanagement-externals/ajaxflash/ajaxflash.swf
this is the server with the problems):
sendAjaxRequest: entered
sendAjaxRequest: request object created
sendAjaxRequest: response object created
sendAjaxRequest: request submitted
processAjaxResponse: entered
processAjaxResponse: request failed
_root.currentXmlRequestObject.contentType = text/xml
_root.currentXmlRequestObject.loaded =
_root.currentXmlRequestObject.status = 0
_root.currentXmlRequestObject =
<request><ajax>...</ajax></request>
processAjaxResponse: javascript callback activated - error
processAjaxResponse: internal data resetted
policyfiles.txt log for the same server:
OK: Root-level SWF loaded:
http://www.dental.pitt.edu/informatics/contactmanagement-externals/ajaxflash/ajaxflash.swf
OK: Searching for <allow-access-from> in policy files
to authorize data loading from resource at
http://cms.dentalinformatics.com/contactmanagement.v3.ajax/en/public?clientInstanceConfig[ name
by requestor from
http://www.dental.pitt.edu/informatics/contactmanagement-externals/ajaxflash/ajaxflash.swf
OK: Policy file accepted:
http://cms.dentalinformatics.com/crossdomain.xml
OK: Request for resource at
http://cms.dentalinformatics.com/contactmanagement.v3.ajax/en/public?clientInstanceConfig[ name
by requestor from
http://www.dental.pitt.edu/informatics/contactmanagement-externals/ajaxflash/ajaxflash.swf
is permitted due to policy file at
http://cms.dentalinformatics.com/crossdomain.xml
Traces when the adapter is loaded from
http://www.chimos.de/cms-testbed/naos-external/ajaxflash/ajaxflash.swf
this a the server WITHOUT the problems):
sendAjaxRequest: entered
sendAjaxRequest: request object created
sendAjaxRequest: response object created
sendAjaxRequest: request submitted
processAjaxResponse: entered
processAjaxResponse: request succeeded
processAjaxResponse: javascript callback activated - ok
processAjaxResponse: internal data resetted
policyfiles.txt log for the same server:
OK: Root-level SWF loaded:
http://www.chimos.de/cms-testbed/naos-external/ajaxflash/ajaxflash.swf
OK: Searching for <allow-access-from> in policy files
to authorize data loading from resource at
http://cms.dentalinformatics.com/contactmanagement.v3.ajax/en/public;main/default/core/pub lic-interface/register-external?clientInstanceConfig[name
by requestor from
http://www.chimos.de/cms-testbed/naos-external/ajaxflash/ajaxflash.swf
OK: Policy file accepted:
http://cms.dentalinformatics.com/crossdomain.xml
OK: Request for resource at
http://cms.dentalinformatics.com/contactmanagement.v3.ajax/en/public;main/default/core/pub lic-interface/register-external?clientInstanceConfig[name
by requestor from
http://www.chimos.de/cms-testbed/naos-external/ajaxflash/ajaxflash.swf
is permitted due to policy file at
http://cms.dentalinformatics.com/crossdomain.xml
This is the
crossdomain.xml file (I know it allows everything, but I
wanted to be sure ...)
http://cms.dentalinformatics.com/crossdomain.xml
I placed the
fla file here
http://www.chimos.de/ajaxflash.fla
, which consists of 4 Key Frames for the interaction with
Javascript.
Your help is highly appreciated!
Thank you!
Niklas

Hi Ajeet
Thanks for you reply.
Unfortunately it does not help to delete the locks in SM12 - they keep popping up.
Regarding SM50, then we see the process here. But when we kill the process it just pops up again.
I have now asked the BASIS guys to kill the request at OS level.
I just find it pretty weird that we cannot stop a load from within the system.
Kind regards,
Torben

My FaceTime keeps failing, even though I've updated my appleID. Help please?

I've reset my Apple ID, my internet connection is fine. I can ring people but it takes a long time connecting and then says "Facetime Failed". What am I doing wrong?

I would be helpful to know what those "basic steps" you have already tried are, but lacking that information:
Settings app > iTunes & App Stores - sign out of your AppleID
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
Sign back into your AppleID (same location as noted above)

Urgent:::: ldapbinssl fails even though ldapbind success

Hi,
I am trying ti implement the External Authentication plugin for AD and OID. so i configured the OID in SSL mode and executed the ldapbind command along with the wallet details.
i got "bind success" message.
but when i am executing the ldapbindssl with the OID server i got error
Connecting server in SSL Mode
Checking if SSL is enabled
SSL not enabled
SSL being enabled
Binding
ldap bindERROR
system error code:0
LDAP error code: 52
Error message : server unavilable
I refereed to meta link ID 430907.1 also. but it didn't helped me.
can anyone help me in enabling this SSL for OID
Thanks and Regards

Hello all,
I referred to matalink [ID 430907.1] also. but no use
Can anyone please look after this issue.
Its very very urgent.
Thanks and Regards.

Messaging Server 5.0 setup program detects a previous server instance and fails, even though earlier versions were uninstalled

During the installation of Messaging Server 5.0, the setup program displays
a message stating that a previous Messaging Server instance has been detected.
The program then prompts me to upgrade the existing server instance or create
a new server instance.

If I choose the option "Create New," the setup program will create the
following directory:

msg-server-name-1

Because I don't want this directory to be created, I choose the other option,
"Upgrade." However, with this option, the setup program eventually displays
the following error message:

A serious problem occurred while installing the iPlanet Messaging Server
Messaging Configuration and Services. It reported the following problem:
The application command /usr/iplanet/server5/msg-alien-1/start-msg
could not be run.
Due to a serious problem the iPlanet Messaging Server installer is unable
to continue. Please examine the log file
/usr/iplanet/server5/setup/msg/iplanet-msg-install.log for more
information.
Checking the log file reveals the following entries:

NOTICE: Running Init Config.
NOTICE: Creating messaging file attributes.
NOTICE: Running Removing old sessions database.
NOTICE: Starting Messaging Configuration and Services.
ERROR:
TYPE: Application
LOCATION: UApplicationTools::RunApplicationUNIX
DETAILS: The application command
/usr/iplanet/server5/msg-alien-1/start-msg could not be run.
Is there a way to work around this problem with the setup program detecting
a previous installation?
Use the following steps to correct this problem:

<OL>
<LI>Uninstall previously installed instance(s) of Messaging Server

<LI>Remove the
/etc/msgregistry.inf
file

<LI>Run the Messaging Server 5.0 installer again
</OL>

I have followed the steps as stated in this article. But still, Messaging cannot be installed.Is there a "CLEAN" way to completely un-install iPlanet Messaging server?

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.

Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon,

PayPal auto-recharge fails even though manual paym...

Similar Messages

Maybe you are looking for