Paypal button code works fine for one button but not another

Hey there, I have a paypal btn with this code on it:
on(release){
mylv = new LoadVars();
mylv.cmd = '_s-xclick';
mylv.encrypted = '-----BEGIN
PKCS7-----MIIH0QYJKoZIhvcNAQcEoIIHwjCCB74CAQExggEwMIIBLAIBAD
CBlDCBjjELMAkGA1UEBhMCVVMxCzAJBgNVBAgTAkNBMRYwFAYD
VQQHEw1Nb3VudGFpbiBWaWV3MRQwEgYDVQQKEwtQYXlQYWwgSW
5jLjETMBEGA1UECxQKbGl2ZV9jZXJ0czERMA8GA1UEAxQIbGl2 ==-----END
PKCS7-----';
mylv.send('https://www.paypal.com/cgi-bin/webscr', 'POST');
(i took a few characters out of the encrypted string--just in
case and to shorten the post)
This button works fine.
Now, I need a second button for a different item.
So, I went on to paypal last night and generated a "buy now
button" several different times. Copied and pasted the encrypted
string where the old one is. When I have the site live and click on
the new button it takes me to a paypal pages that says "We were
unable to decrypt the certificate id."
Any one have this issue before? And does anyone have any idea
of how to correct it?
Thank you in advanced,
hutch

HI Bob,
You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
208.67.222.222
208.67.220.220
See if that helps.
Carolyn

Similar Messages

Safari works fine in one account, but not another

In one account ONLY, Safari doesn't work. I get a "can't connect to internet" error message. In that same account, email works fine, so I know I am connected. Tried emptying Safari folders, re-setting Safari, and downloading the latest Safari. Nothing helps.
Any suggestions?
Many thanks.
RSF

Hi
The usual remedy for "can't connect to Internet" is to add DNS numbers to the Network panel.
Go to System Preferences>Network. Select your connection, then select "advanced". In the DNS panel add these codes:
If you live in the United States: 4.2.2.1 and 4.2.2.2
Outside the US: 208.67.222.220 and 208.67.220.222
Select "OK", then select "apply".
Restart Safari.

Safari works for one user but not another on same computer

MacBook with multiple user accounts. Safari (and Firefox) work fine for one user but are unable to open web pages when the other user is logged in. The error in Safar is "Safari can't open the page "http://xxxxxxxxx/" because it could not connect to the server "/xxxxxxx/" . DNS is working for this user. I am able to ping any number of sites from Terminal. Network Preference pane is configured to not require any proxy. This is a case of it was working but now it's not.
Can anybody help with this? I know I can fix this by simply creating another user and transfering the affected user's data to the new account but I would rather not. TIA

HI Bob,
You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
208.67.222.222
208.67.220.220
See if that helps.
Carolyn

Firefox crashes on start up for one user but not another

Crash ID: bp-df3a48d7-363c-4d2f-87d3-f73902140723
Version: 31
Crashes on start up for one user but not another. Both are administrators.
I have uninstalled and re-installed. No change with each user.
Crashes in safe mode as well (holding down shift)
No addons present in other user.
Have ran Malwarebytes and cleaned
Have ran CCCleaner and cleane all including registry entries with Firefox uninstalled.

Create a new profile as a test to check if your current profile is causing the problems. <br>
See '''Creating a profile''':
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem <br>
'''Profile Backup and Restore'''
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

We've had several instances where we have had to run chkdsk on arrays with over 1m files. Average completion time is approximately 72 hours. The maximum downtime window they have available is the 64 hour weekend window. File sizes and number of files were
much smaller then than they are now.
The idea, in theory, was to use VHDs to compartmentalize the data into smaller volumes which could be more easily managed. It would also improve performance when transferring these compartments of data as they would use sequential read/write rather than
fragmented/random. This idea was never fleshed out in entirety, they don't split data up into little containers, but simply into big ones per project. Hence the 11m files in one container that I am currently trying to diagnose.
Some other important facts: The VHD in question is mounted in B:/project/ as this server also allows remote workers to log in, but they are restricted to see only data in E:. Disks A-D are hidden via group policy.
Update: icacls is failing on a large number of files within this dataset. I counted the path characters to ensure it wasn't the 255 character limit I was encountering and verified that the paths being blocked are only about 150 characters long. Once it finishes,
I'll have to try taking ownership and then re-running it. At this point I still have no idea how long to expect. I'm running out of time as the environment will be in use again at 9AM tomorrow morning.

VC model fails for one user but not another - both have same auths

We have a VC model that we created and moved to Prod (portal NW04s connecting to BW 3.5 query). It works fine for user A, but user B gets error:
#1.5#0003BADBD644002D000000030000053D0004282F58AC16AC#1170083723088#com.sap.port
al.visualComposer_NWBIKit_logger#sap.com/irj#com.sap.portal.visualComposer_NWBIK
it_logger#DOBREGON#11523#####SAPEngine_Application_Thread[impl:3]_5##0#0#Error#1
#/System/Server#Java###Cannot execute BW query::Nested Exception. Failure to exe
cute native function. Nested Exception. INVALID_VARIABLE_VALUES
Both user have same authorizations in Portal and BW backend.
There is no trace info on the BW back end, so it seems like the hangup is occuring on the portal side.

It turns out it was the backend authorizations. The user was able to view the BW query via the BEX Explorer. But when she tried to access it via a VC Flex IView, we got that error. Initially I wasn't seeing any auth traces in the BW system, but then we expaneded the trace and determined the user was missing an activity. It's a strange error. Would be nicer to see a 'user not authorized' or something along those lines to better pinpoint the cause. But we're good now.

ITunes WiFi Sync works fine for 4 devices, but not for my iPad2

I'm using the latest version of iTunes (11.0.4) on an iMac with the latest version of Mountain Lion (10.8.4) and multiple iOS devices listed below:
iPad 1 (iOS 5.1.1)
New iPad (iOS 6.1.3)
iPhone 4S (iOS 6.1.3)
iPhone 4S (iOS 6.1.3)
iPad 2 (iOS 6.1.3)
iTunes WiFi Sync works fine for all the devices but the iPad 2. They all show up in the "Devices" area of iTunes (though sometimes I need to power them down and restart them to get them to show up properly) and they all sync automatically when plugged into a power source.
The iPad 2, however, behaves thusly:
- Shows up under "Devices" in iTunes
- Can be synced wirelessly IF initiated from the computer
- Does NOT automatically sync when plugged in to a power source
- CanNOT be synced wirelessly from the iPad itself, as under settings > general > itunes wifi sync, it shows the screen that says "to enable wifi syncing with itunes, connect to ituens on your computer using a cable..." as if I have this feature turned off in iTunes (which I do not). The "Sync Now" button is not displayed (not even a grayed out version).
What I've tried:
- Repeatedly powering down and restarting iTunes, the computer, the iPad, and the router in various orders and combinations
- Repeatedly turning off and on the wifi sync feature via iTunes
- Experimenting with the "Open iTunes when this iPad is connected" option as this actually fixed a similar issue on my iPad 1
- Actually restoring the iPad to factory settings, then restoring from backup in case there was an issue with the iOS install
Nothing has helped
What I'm sure it's not:
- A problem with the usual iTunes settings (check "enable WiFi sync", uncheck "prevent iPads from syncing", etc.). Since all other devices work and I actually can perform a wireless sync when initiated from iTunes, I don't see how the issue could live here at all.
Any ideas? I'm pretty stumped!

Another oddity: When this iPad syncs, it does NOT create a backup as part of the process (whether wired or wireless). All my other devices do, as one would expect...

Program is working fine in one version but not in other how to handle this

hi all,
i have a program which works fine in ECC5. in that program i have used some XML related classes and interfaces. but when i try to execute this in 4.6c version its showing lot of all errors saying that so and so class or so and so interface is not supported in 4.6c version like that.
how to overcome these errors, means how to make the classes and interfaces which work fine in ECC5 to work well in 4.6c version.

Hello Mr. Rich,
the coding which u provided was very helpful it almost solved my problem,but at
the the last iam stuck up with a small problem. i wrote the coding like this for my
program
tables:mara.
type-pools: truxs.
parameters: p_matnr like mara-matnr.
data: ixml type truxs_xml_table.
data: xxml like line of ixml.
data: size type i.
data: file_str type string.
file_str = 'C:\simp.xml'.
data: begin of itab_mara occurs 0,
          matnr like mara-matnr,
          ernam like mara-ernam,
          aenam like mara-aenam,
          vpsta like mara-vpsta,
      end of itab_mara.
select matnr ernam aenam vpsta from mara into table itab_mara up to 5
rows where matnr = p_matnr.
CALL FUNCTION 'SAP_CONVERT_TO_XML_FORMAT'
EXPORTING
I_FIELD_SEPERATOR          =
I_LINE_HEADER              =
I_FILENAME                 =
I_APPL_KEEP                = ' '
I_XML_DOC_NAME             =
IMPORTING
   PE_BIN_FILESIZE            = size
TABLES
    I_TAB_SAP_DATA             = itab_mara
CHANGING
   I_TAB_CONVERTED_DATA       = ixml
EXCEPTIONS
CONVERSION_FAILED          = 1
OTHERS                     = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
   BIN_FILESIZE                  = size
    FILENAME                      = file_str
   FILETYPE                      = 'BIN'
APPEND                        = ' '
WRITE_FIELD_SEPARATOR         = ' '
HEADER                        = '00'
TRUNC_TRAILING_BLANKS         = ' '
WRITE_LF                      = 'X'
COL_SELECT                    = ' '
COL_SELECT_MASK               = ' '
DAT_MODE                      = ' '
IMPORTING
FILELENGTH                    =
TABLES
    DATA_TAB                      = ixml
EXCEPTIONS
FILE_WRITE_ERROR              = 1
NO_BATCH                      = 2
GUI_REFUSE_FILETRANSFER       = 3
INVALID_TYPE                  = 4
NO_AUTHORITY                  = 5
UNKNOWN_ERROR                 = 6
HEADER_NOT_ALLOWED            = 7
SEPARATOR_NOT_ALLOWED         = 8
FILESIZE_NOT_ALLOWED          = 9
HEADER_TOO_LONG               = 10
DP_ERROR_CREATE               = 11
DP_ERROR_SEND                 = 12
DP_ERROR_WRITE                = 13
UNKNOWN_DP_ERROR              = 14
ACCESS_DENIED                 = 15
DP_OUT_OF_MEMORY              = 16
DISK_FULL                     = 17
DP_TIMEOUT                    = 18
FILE_NOT_FOUND                = 19
DATAPROVIDER_EXCEPTION        = 20
CONTROL_FLUSH_ERROR           = 21
   OTHERS                        = 22
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
but when i try to open the XML file into which the data has to be downloaded it shows the following error.
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
A name was started with an invalid character. Error processing resource 'file:///C:/simp.xml'. Line 1, Position 23
<?xml version="1.0"?><%_TYPE0000000019><%_TYPE0000000019><MATNR Datatype="C" Length="18">00000000008...
help me to resolve this problem.
thanks,
anil.

Port 25 works fine for SSL/SMTP, but not port 587?

So after doing a rather painful migration to new hardware to support 10.5 from a previously working 10.4 config...
I got SSL working -- web service is fine, mail service is fine for all ports for POP and IMAP...but not port 587.
- It's open on my firewall
- There's no software firewall impeding it
- Trying to telnet to port 587 results in nothing
It's as if the server isn't even listening to the port...
And the odd part?
- Mac OS X desktop clients report they can't connect on 587. Changing the port to 25 and leaving everything else the same (auth type, username, password) -- suddenly it works...BUT
- The iPhone is configured for port 587 and works every time.
My guess it that iPhone auto falls back to port 25 if all else fails, I can't explain why it would work. Bigger question, I suspect something got munged in the migration...is it possible it needs to be told to listen on 587 as well?

I saw that site...it mentions adding port 587 specifically -- or commenting out "the appropriate lines of master.cf"
I assume that means to uncomment out the submission port in that file -- or would it be better to add 587 specifically?
Also, I never allow unauth SMTP (even inside my network) -- I would want to continue to impose that on the submission port and the normal port 25; how do I do this?
Thanks in advance for the help.

Script works for one frame but not another

I set up 2 keyframes, each one loads a different text file
into a dynamic text box. The text box for the first keyframe is
named "session" and the text box for the second keyframe is named
"oneptq". The text file for the first text box is named Titles.txt
and the text file for the second keyframe is 100Q.txt. The code I'm
using is identical (except for the respective names of the text
boxes and text files) but for some reason the text will load in the
first text box but not the second.
Here's my AS for the first keyframe:
lvLoader = new LoadVars();
lvLoader.onLoad = function(success)
if(success)
session.text = lvLoader.textbody;
lvLoader.load("Titles.txt");
And my AS for the second keyframe:
lvLoader = new LoadVars();
lvLoader.onLoad = function(success)
if(success)
oneptq.text = lvLoader.textbody;
lvLoader.load("100Q.txt");
I can't figure this thing out. Please help. Thanks.

Have you double checked that it's a DYNAMIC text box? Maybe
it was accidentally swapped by to static at some point...

Flash not working for one user, but not another on this CPU

Hi,
For user A on my computer most video will play in Safari, Firefox, and Chrome. But video at nfl.com will not play. The ads will play but not the actual feature.
I just found out that the videos on nfl.com will work for user B. I have rerun the Adobe Flash 10.1 installer in user A's account several times with no luck.
Are there permissions or libraries I should trash to try to restore this capability?
thanks,
Steve

HI,
For user A on my computer
Try uninstalling the current copy of Flash, reinstall new, then repair permissions.
Uninstall Flash
Install the most recent version of Flash here.
Now repair permissions.
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
You may also need to delete the Flash cache. Instructions here.
http://discussions.apple.com/thread.jspa?messageID=11672709&#11672709
If that doesn't help, install the v10.6.4 Combo Update It's ok to do this even though you are already running v10.6.4.
Carolyn

Application works for one user but not another......Please help

Hi just wondering if anyone can help.
We have an app (get i_player automator) that we have been successfully using for the last year or so. The other day our internet connection died mid download and the app stopped responding.
Rather than force quit darling hubby did something fancy with the terminal window (not entirely sure what but I remember kill, bash and gerlp??).
Anyway since then the app will start appear in the doc (bouncing happily up and down) but no window will open. This happens just on my log in. If I ctrl click the application is listed as not responding.
The app works correctly for other users on the same machine.
I have tried the following to no avail
Turning off and on again
Deleting the app and re installing
Any ideas?

Most applications work user-per-user, maybe your darling has to do some more of that magic in the Terminal on your account?

IPhoto 08 imported for one user but not another

We have iPhoto '08 ver 7.1.5 and it worked fine with my login. I could import photos from our Canon PowerShot SD960 into my iPhoto library. But when my wife logged in and tried to import the same photos she got a message stating "Unreadable Files" and "the following file could not be imported".
On her login using Image Capture, she could import the pictures off the camera and save them to her Desktop then she could view and also save them using Preview and could also import them to her iPhoto library from the Desktop folder she had saved them into.
I reformatted the camera's card and I also used iPhoto Library Manager and rebuilt her Library.
We can now both import pictures fine but I'm wondering for how long this will be the case.
Same exact situation existed with another camera we have - it worked for me but not for her.
Just curious to know what the cause might have been in case it's something we are doing that is causing the issue.

HI Bob,
You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
208.67.222.222
208.67.220.220
See if that helps.
Carolyn

ODBC--connection to 'SQL Serverservername' failed for one user but not another

In Win7, we're linking tables in an MS Access 2010 db to tables in a SQL Server 2008 R2 db. The driver user by the File dsn is SQL Server version 6.01.7601.17514 & we're using SQL Server Authentication.
For some reason, one user gets the msg "ODBC--connection to 'SQL Serverservername' failed" before they're even asked for a password, but for other users, the prompt comes up and when they uncheck the Windows Auth box, they enter their password
and connect successfully to the SQL Server db. Both users have db_datareader access to the SQL Server db.
I had the user that gets the error msg log onto my PC and they get the same error (yet it works for me.)
This user was, however, able to successfully relink the tables, but then when we closed the access db and opened it again, the user got the "ODBC--connection..." error agin.
I'm stumped as to why this is happening for one user.

Hello Knellen,
Please help to collect more log information regarding this issue, such as windows event log, SQL Sever log information. They are helpful for us to troubleshoot it.
Regards,
Elvis Long
TechNet Community Support

Synaptics touchpad on 4540s works for one person but not another

The Synaptics touchpad on my ProBook 4540s (Win 7) works normally when I use it but when my wife tries to use it, the touchpad is unresponsive after a very slight initial cursor movement.  (Anticipating replies - Yes, she casts a shadow, pictures of her come out normally, and she has a visible reflection in a mirror.)     The touchpad sensitivity setting is maxed on light touch and cursor speed is maxed.
She has relatively small hands, and long nails, but she had no difficulty using the touchpad on our old HP dv9910us and has no problem with an iPad touchscreen.  This week she tried the touchpad on a Sony VAIO that was so worn most of the original surface coating is gone, and had no problem moving the cursor on that machine either.   She even tried the awkward solution of using her knuckle instead of her fingertip on the HP in case her nails were getting in the way, but that didn't work either.
Not having used a 4540s before, and not having access to another one to compare, I have no way to tell whether this is a bad individual touchpad unit or a design issue.   If a design issue, what's the workaround?     For instance, is there a skin I can put on the touchpad to increase its conductivity?

A friend of mine bought a ProBook 4540s yesterday. At Microcenter we noticed that the touch pad often would stop working for her, and sometimes for me, but it usually worked for me. She bought the laptop, and we she got it home we noticed the same problem. I played with the touchpad a little and noticed this pad has a very narrow window of operation. With the 14.1" HP's like the nc6220 or nc6400, you can use one finger, two fingers, even three fingers, and the mouse responds nicely. However if too much surface area is in contact with the touchpad of the 4540s it doesn't work. Too much surface area is the pad of your finger. Because my friend has long nails, she was laying her finger pretty flat on the touch pad, and it wouldn't work. When I used the pad like this it wouldn't work for me either. Because I have short finger nails I have always used the lower end of my tip. This works pretty well with the 4540s. Pressure seems to have little affect. It is a matter of surface area, and the acceptable area has a small range!

Paypal button code works fine for one button but not another

Similar Messages

Maybe you are looking for