PayPal Extension throwing and error

I just installed the PayPal extension into Dreamweaver 8. I
upgraded from MX recently, but just installed this extension today.
It is throwing an error sayting Dreamweaver could not open
dynamiccmn.js! Any solutions that anyone might know?

Did you ever find a solution?

Similar Messages

Does Hibernate throw and error if the result set is above a specific #

Does Hibernate throw and error if the result set is above a specific #
of records?

why do you ask?Maybe he hasn't been able to find the bug in his code yet, so he's casting further and further about for more and more esoteric explanations for what he's seeing? ;-)
(God knows I've been there...)

Firefox crashes and when attempting to launch after the crash it won't and throw and error msg that js.3250 can't be found- but same file is in Mozilla directory. I must then download new 3.6.8 and lose all tabs.

# Question
Firefox crashes and when attempting to launch after the crash it won't launch; throwing an error msg that " js.3250 can't be found" - but same file is in Mozilla directory.
I must then download new 3.6.8 and lose all tabs and history.

I have a similar problem. Recently my FF8 has been crashing a lot. It regularly locks up an entire core of my PC and often just shuts down. It has just done it a moment ago and when it started back up it did the whole "this is embarrassing" thing and asked me if I wanted to reload my tabs. I deselected the one that I was trying to view as I suspected that it may have been the cause (unlikely; it was node4.co.uk) but anyway, let's skip it just in case. Click on the button to restore and up pops my homepage only. So all of my other tabs, which I was using for work incidentally, are gone.
This is not the first time this has happened on FF8. It happened a lot recently on FF6 I think it was (so hard to keep track now, Mozilla) and I switched to Chrome as a result, but it turns out that it crashes even more than FF6 did. FF7 was a vast improvement but FF8 is so unstable/unpredictable for me at the moment that I think I'd rather use IE9 than this. It's driving me mental, clearly! I wish I could kill the process manually and have it retry restoring tabs. Hey, there's an idea Mozilla; give us a menu item that allows us to restore the session to how it started to try again or at the very least get a list of the pages we were looking at. They don't show up in Recently Closed Windows and the Restore Previous Session is greyed out too. Gah! Help!

HT1379 My iMac (2011) has been persistently throwing this error message: "SafariDAVClient quit unexpectedly." This started when I moved up to Mavericks. Nothing crashes, and all I have to do is click "ok" to get rid of the error window. Still, annoying. H

My iMac (2011) has been persistently throwing this error message: "SafariDAVClient quit unexpectedly." This started when I moved up to Mavericks, from Lion. Nothing crashes, and all I have to do is click "ok" to get rid of the error window. Still, annoying, as this darn Error message pops up at least every 60 seconds Help?
Here is thev error data that shows up in my Console after it happens. Of course, it might as well be GREEK TO ME!:
Process:         SafariDAVClient [5937]
Path:            /System/Library/PrivateFrameworks/BookmarkDAV.framework/Versions/A/Helpers/Safa riDAVClient
Identifier:      SafariDAVClient
Version:         106
Code Type:       X86-64 (Native)
Parent Process: launchd [202]
Responsible:     SafariDAVClient [5937]
User ID:         501
Date/Time:       2014-02-02 15:40:22.026 -0800
OS Version:      Mac OS X 10.9.1 (13B42)
Report Version: 11
Anonymous UUID: 38C42EEE-0927-2A62-02AC-FE5E1CEBFA44
Sleep/Wake UUID: F4BAEB51-39DA-42AE-8105-AB27895B59BD
Crashed Thread: 0 Dispatch queue: com.apple.Safari.BookmarkFolder.childrenAccess
As well, my iCloud Pref Pane will not open!
What the HECK is goin' on?

feckinHell wrote:
As well, my iCloud Pref Pane will not open!
That's related since the process is attempting to load your Safari bookmarks from iCloud, and is crashing for some reason.
Try this:
Select the entire line that follows (triple-click to select it), then control-click, and from the contextual menu that appears, select Services > Reveal in Finder:
~/Library/Caches/com.apple.iCloudHelper
Drag that entire folder to the Desktop.
Quit Safari.
Attempt to open iCloud Preferences again. If it opens de-select Safari.
Launch Safari again and determine if the problem is fixed.

Creation of Transfer Order takes a long time and finally throws spool error

Hi,
I create Sales Order of type OR. I do delivery successfully. But when i proceed to create Transfer Order, it takes painfully long time and finally after painful 30 mins or so, it throws a error message, 'Error in spool call' with a blank page. I click on save icon and transfer order is created.
But the creation takes very long time. I checked SP01 and there are no requests.
Any suggestions will be rewarded.
Regards,
Mangesh

Dear,
Kindly contact your Basis team it will help you.
After error please take the screen short of SU53 and give to basis team.
May be it will help you.
Regards,
Sandip

Got an (unlocked) iphone 4s from US and tried activating in India but it throws an error saying 'unable to activate bcos the activation server cannot be reached' ..I tried connecting to itunes through my laptop but it does not detect my iphone..pls help

Got an (unlocked) iphone 4s from US and tried activating in India but it throws an error saying 'unable to activate bcos the activation server cannot be reached' ..I tried connecting to itunes through my laptop but it does not detect my iphone..pls help

mithaani wrote:
Got an (unlocked) iphone 4s from US
As kb1951 states, unless this phone was purchased directly from Apple, it is not officially unlocked. In the US, only Apple sells officially unlocked iPhones. The message you got generally means your phone was hacked to unlock it...jailbroken...Apple's servers have detected such & are preventing your phone from activating...there's nothing wrong with the activation servers.
You'll need a sim card from the carrier your phone is locked to in order to activate it. If you don't know what carrier, you'll have to call AppleCare in the US to determine this info. Be aware, US carriers will not authorize official unlocking unless you are a customer that used the phone on their network. Thus, there is most likely no way for you to get this phone officially unlocked.
Good luck.

IOS native extension for networkinfo throws an error

Hello,
I'm trying to check wether the active connection on a device is Wifi or mobile data connection. On android this works fine but on iOS there is a problem.
A native extension exists for this see here.
The problem is that the line below throws an error: 'Error #1009: Cannot access a property or method of a null object reference.'
var interfaces:Vector.<com.adobe.nativeExtensions.Networkinfo.NetworkInterface> = com.adobe.nativeExtensions.Networkinfo.NetworkInfo.networkInfo.findInterfaces();
I'm using AIR3.1 (no idea if this works on 3.0).
Anybody a solution?

Ever solve this? I'm also getting errors...
Specifically:
ArgumentError: Error #3500: The extension context does not have a method with the name getInterfaces.

MSS Requisitions is not moving to Recruiter's POWL and system is throwing the errors.

Hi everyone,
Hope all are doing in good spirit.
I have an issue in regards with Requisition Creation and its related process.
I am working in Standalone architecture where Recruiting server is in another instance apart from HR system.
We are using WS45600028 standard workflow.
When Manager submits the Requisition to higher level manager to approve, its done successfully and the notification is going to the Manager. But after approval, Requisition is not going to Requiter's POWL queries.
I have maintained Support Group, Lead Recruiter in it and assigned this to Requisition.
I have checked HRP5131 table. But there is no SOBID which sould be flaged as Lead Recruiter.
When Higher level Manager approves the Requisition, It is successful bu there is an error in slg1.
Error: Error when ending the Work item 0000007704 in HR system.
The system returned the call of interface SAP_WAPI_WRITE_CONTAINER in this context
System Response:
Call ended with an error. The function was not executed.
Procedure: Remove call.
At the same system is throwing the error for the User (This user is used for RFC creation using with transaction SM59): No candidate for this User.
Details of error: The error occurred in program CL_HRRCF_CANDIDATE_ADMIN_BL===CM00B line 77
Procedure for system administration:
Check the context in which the error occurs.
Since it it probably program error and not an input error, you should contact SAP.
Can you please look into the above issue and address me if you have any solution for the same.
Any help would be greatly appreciated.
Thank you.
Regards,
Sekhar

Hi Nicloe,
Thank you very much for your response.
I have done the data transfer from HR system to E-Rec system through ALE iDoc using PFAL.
All the is transferred and corresponding NA, CP, BP generated in E-Rec for P.
All the users(Recruiter, Managers and Recruiting Admin) data have transferred to E-Rec System.
But when Manager is creating the Requisition Request, it going to his higher level manager for approval and its been approved successfully. Later it is not updating the Recruiter's POWL.
In DB table HRP5125 Requisition data is created but with only few details like Start and End date, Object ID. in E-Rec system.
In HRP5131, NB related data is there but there is no SOBID for lead Recruiter.
Immediately i am getting errors in both HR and E-Rec systems as follows after the Requisition got approved.
In HR system, Error when ending the Work item 0000007704. Workflow completed successfully but still here is an error.
In E-Rec systemThe error occurred in program CL_HRRCF_CANDIDATE_ADMIN_BL===CM00B line 77.
And system says, Since it it probably program error and not an input error, you should contact SAP.
I heard that there might be an inconsistency in NA, BP, CP when we do PFAL transaction for data transfers. Can you suggest me to raise SAP ticket in this context?
Or Did i miss any configuration in this connection?
What can be done now to fix this? I am working EHP 5 and SP level is 11.
Can you please let me know. Kindly help me out of it as i am struck with this since very long time.
Thank you.
Regards,
Sekhar

Throwing and catching deliberate errors in bash

Hello,
In many languages one can throw deliberate errors of a specific kind as well as catch-trap for specific errors. I'm having a hard time determining how to do this in bash 3.2 with it's 'trap' command.
Moreover, I can't figure out whether or not if it's even possible to catch for specific thrown errors defined by a scripter in bash. My own tests have led to a dead end and I haven't come any better understanding from reading the bash info docs, and numerous online and in print examples of the 'trap' command.
Basically, I wish to...
1. First, have scripts throw a specifically, identifiable, unique error when a certain known bad state has been encountered that they can't handle.
2. Secondly, to able to test for whether scripts are throwing an specific error under a certain condition.
3. Trap for and catch only that specific error and then keep on going, performing further automated tests.
Is this possible in bash?
Below is an example which might better illustrate what I've attempted to do. It unfortunately, doesn't do what's needed at the moment. i.e.- It will catch all errors and exits but not a specific one.
#--- The example below traps all errors but not the specific one.
particular_function()
current_status="some known bad condition"
if [ "$current_status" = "some known bad condition" ]; then
# Encountered some known condition we can't handle so throw specific error.
echo "Encountered a, we knew this would happen, type error."
exit -99
fi
testmethod_for_expectederror()
trap 'echo "function threw expected error code as it should."' EXIT
particular_function
testmethod_for_expectederror
echo "Continued passed caught error as desired and continuing further tests..."
Thanks,
-Anthony

{quote:title=BobHarris wrote:}The bash trap statement was not intended as an alternate way to return errors.
But if you want to generate your own signals, then use the kill command.
See "man 1 kill". {quote}
It sounds like I'm attempting to pound a square peg through a round hole? Attempting workarounds, like shaving off the corners of the peg, might eventually just lead to loss of sanity, time wasted - gone forever, never to return.
So, perhaps I'll try some other method.
If it offers a little more clarity, I'm trying determine [how to write tests|http://xp123.com/xplor/xp0101/index.shtml|Test-First Stoplight - write a test first before writing a line of code.], in bash, for situations where a script [should halt executing|http://xunitpatterns.com/Test%20Method.html#Expected%20Exception%20Te st|Expected exception test pattern] when it encounters something it can't handle rather than keep on going causing potential mishaps.
Basically, I would like to avoid causing the [xUnit testing framework|http://www.martinfowler.com/bliki/Xunit.html|xUnit testing frameworks in XP] I'm using [(shUnit2)|http://code.google.com/p/shunit2/|shUnit2 project site] from incorrectly reporting expected errors, that are suppose to be thrown, by a script, as failures. An expected, [correctly thrown error|http://books.google.ca/books?id=gFgndevwMAC&pg=PA163&lpg=PA163&dq=%22exceptiontest%22+%22test+driven+development%22patterns&source=bl&ots=enHrtsSunH&sig=PbbvWbea_VkqVAbdGYZwJDUcygI&hl=en&ei=XQslS qzSDs-EmQfIvqCFCA&sa=X&oi=bookresult&ct=result&resnum=1|Catch expected exceptions and ignore them. in TDD by Kent Beck] should be counted as a success by the framework in that context. Assuming, the script didn't exit in a bad way. At the same time, unforeseen errors should not be blocked and should propagate up to be reported as an erring test.
Thanks for your help,
-Anthony

Installing Adobe Extension Manager and get the error message

I am trying to install Adobe Extension Manager and get the error message ' Requires Photoshop 32 version in range of inclusively 13.0 and 13.9' Please help me solve this, not sure how to proceede after getting a message that there is four updates available to download !

Type <b> about:addons </b> in URL
*plugins and extension -> disable adobe reader

Central admin application pool is auto stopping and throwing 503 error

Hi All,
Central admin application pool is auto stopping and throwing 503 error
EventLog error: The Module DLL C:\Windows\Microsoft.NET\Framework64\v4.0.30319\webengine4.dll failed to load. The data is the error.
All the application pool are auto stopping and when we trying to open central admin getting 503 error.
If I start the app pool again it will auto stop.
and the event log erorr is The Module DLL C:\Windows\Microsoft.NET\Framework64\v4.0.30319\webengine4.dll failed to load. The data is the error.
Its urgent.Can anyone please help on this.
Thanks in advance
Sunitha

Hi
couple of checks
1.check if the needed module is present in the system32\inetsrv folder. If it is absent then delete/comment the appropriate line in the
system32\inetsrv\config\applicationHost.config in the globalModules section. Perhaps you will have to delete some modules (that also won't be found and pointed by event viewer) from your IIS application pool.
2.
1) Open IIS.
2) Right click on your Application-Pool for the web application and select "Advanced Settings".
3) Set "Rapid-Fail Protection" -> "Enabled" to False.
If this is true, the Application pool is shut down if there are a specified number of worker process crashes within a specified time period. By default, an application pool is shutdown if there are 5 crashes within a 5 minutes interval.
3.http://blogs.flexnetconsult.co.uk/colinbyrne/post/2012/11/11/RunningA32bitApplicationAlongsideSharePoint2013Problems.aspx
4.https://social.technet.microsoft.com/Forums/en-US/bfe0b2b0-7b50-4391-b076-bec14040504d/fixed-kb3037580-security-patching-4182015-application-pools-stopped?forum=sharepointgeneral
Regards,
Rajendra Singh
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful
http://sharepointundefind.wordpress.com/

Can't install paypal extension onto DW 8

My hdd crashed and I end reinstalled everything back on my
new hdd, but after I reinstalled the DW 8, and I want to add the
paypal extension (PayPal420.mxp) and amongst other extensions that
I have in my collection, but it errors out saying that "can't
update menus. The extension will not be installed" This is under
Macromedia Extension Manager dialog box.
Anyone have any idea to why it errors out like this?

Please click "Tools"->"Preferences" menu item, uncheck "Allow Extension Manager to access Internet" option, then retry.

How to throw Custom Error message in Portal

Hi Experts !
I am working on CRM 5.0 and using BADI CRM_ORDER_STATUS for LEAD transaction.
This BADI is checking the userid when user is trying to change the status of a lead. if userid is not correct than it is throwing an Error Message in GUI but this message is reflecting in Portal as an Exception but what I need here is a custom Message similar to GUI.
Pls suggest .
With Thanks & Regards
Navneet

Hi Experts !
I am working on CRM 5.0 and using BADI CRM_ORDER_STATUS for LEAD transaction.
This BADI is checking the userid when user is trying to change the status of a lead. if userid is not correct than it is throwing an Error Message in GUI but this message is reflecting in Portal as an Exception but what I need here is a custom Message similar to GUI.
Pls suggest .
With Thanks & Regards
Navneet

I deleted my extensions manager and now my Mac won't start up. Please Help!!

I have an IMac, 24" model, running OS X. For the past several days, little warning windows have been popping up with this annoying beep, telling me that my computer was infected with various viruses. 4, to be exact. Also, while on the internet, random pop-up windows have appeared, so I thought I did have a virus. So, to correct the matter (or attempt to), I deleted my preferences folder from the system folder, as well as the extensions manager.
Now, the computer won't start up past the white logo screen with the turning gear thingy. I've tried resetting the PRAM, and starting in safe mode, and safe mode with the progress screen, and even something there while holding the option key (that one gave me an icon of my HD, but clicking on it took me back to an endless wait on the white screen). I've tried starting from the disk that came with the computer (I held the C key) but not only doesn't the computer start from the disk, it spits the disk out. I don't understand. The computer was fine until I deleted the ext. mgr and preferences, so it can't be that the computer went bad or something.
I don't know what else to do here. I do have an extended service warranty with Best Buy, but I wanted to see if there was some way to fix this before hauling this thing off to the store. Any suggestions? I'm desperate here, because anything and everything I've tried (based on all the try-this and try-thats I found on the internet), nothing has worked.
Please help.
Thanks in advance.

Well done! You've succeeded in turning your Mac into a useless brick.
Deleting the System/Library/extensions folder and the associated manager removed most of the functionality from your OS.
And all to get rid of what sounds like the MacDefender trojan or a variant.
ref; http://support.apple.com/kb/HT4650 and http://support.apple.com/kb/HT4651
You may have a slim chance of recovering if it will still boot in Target Disc Mode; in which case you can use another Mac to install the system remotely.
And I doubt your warranty with Best Buy is going to cover user "error."
Message was edited by: noondaywitch

I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried

I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???

Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.

PayPal Extension throwing and error

Similar Messages

Maybe you are looking for