Paypal White Paper setup not working

I have followed all the steps in the paypal white paper setup for APEX. However, I'm getting this error message that I simply cannot figure out:
ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1029 ORA-29024: Certificate validation failure
This doesn't make much sense to me since our certificate works fine. The application is here:
https://www.clickachart.com:4459/pls/apex/f?p=155
I know for sure that wallet_path and wallet_pwd are correct. I took all the API data straight from paypal.
Another user experienced similar problems with google checkout. He added the google and google sandbox certificates to his wallet, and it was all fine and dandy. I've added paypal and paypal sandbox certificates to my wallet, and I'm still at the same place.
Please help!

I am NOT positive that happened, but it seems to me there was a thread a while back and it's sticking in my head that somehow something changed on the paypal end...
Thank you,
Tony Miller
Webster, TX

Similar Messages

  • Paypal plug-in does not work on Firefox

    As with others I see, the Paypal plug-in does not work with Firefox
    == This happened ==
    Every time Firefox opened
    == When I downloaded the app

    This is a Paypal problem. Paypal has not updated their plugin to be compatible with Firefox 3.6.x. See the following (read the last paragraph):
    [https://www.paypal.com/helpcenter/panels/solution/printSolution.jsp;jsessionid=tSQcMKWGhpC1gF5TscjTvqGgR89SSQy40mWymRYM12RX2PVG6rTL!1610223101?t=solutionTab&ft=browseTab&locale=en_US&brand=&segment=&ps=solutionPanels&solutionId=39780&highlightInfo=highlightInfo&viewMode=NORMAL&windowType=SAME&isRecord=false&highlightInfo=highlightInfo&t=solutionTab&ft=browseTab&ps=solutionPanels&locale=en_US&_dyncharset=UTF-8&countrycode=US&cmd=_help&serverInstance=9024&viewMode=NORMAL&windowType=SAME&highlightInfo=&isRecord=false&no_strip= What is the PayPal Plug-In and how does it work?]
    I have seen some users posting that the plugin works with Firefox 3.5.x

  • Creative cloud installed on the desktop, but when I start the window is white and does not work

    can someone help me?

    Thank god be with
    2014-08-25 15:14 GMT-03:00 Sheena Kaul <[email protected]>:
        Creative cloud installed on the desktop, but when I start the window
    is white and does not work  created by Sheena Kaul
    <https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View
    the full discussion <https://forums.adobe.com/message/6672088#6672088>

  • 827H router web setup not working

    We were having problems with our 827H router, so I decided to reset it to the factory defaults and re-run the quick setup. I've done that before with no problems.
    This time, after it loads the configuration in the web setup, it keeps checking the model, IOS version, etc.--over and over again. It won't stop, nor can we exit out of it to get to the quick setup.
    Originally the router was connected to a hub. When we couldn't configure it from the web setup, we put the router directly onto a pc with an ethernet cable. We could ping the router. Using the console cable, we are able to see the router's settings. (See attached)
    The pc was set to dhcp. The dns was originally set to "Obtain automatically". We also tried to set the dns and the gateway to the router's ip, and added the domain controller's dns as another dns server. Nothing has worked.
    Any help will be greatly appreciated.
    Thanks!

    Your description of the symptoms is quite puzzling as is the console log that you sent. You say that you connected a PC directly to the router. Was that using a cross over Ethernet cable?
    You say that when you connected the PC to the router you could ping the router. What IP address was on the PC at that point.
    The console output that you included has a kind of garbled output in the show run. It looks as if two things were outputting at the same time. I am not clear if there were actually two things happening together or if the router is really messed up. (Though most of the config that showed up looked reasonable)
    I would suggest that you connect to the console port again and capture all of the console output. I would suggest that whle you are connected and capturing output that you power cycle the router (it may be very helpful to see what messages go to the console while the router is booting).
    After the router boots again, you may be able to use the web interface. If the web interface does not work you should be able to use the console interface to get a congif that should work basically.
    Try these steps and post the output. Maybe then we can find a solution.
    HTH
    Rick

  • 1.01--white Balance still not working?

    the white balance tool in 1.01 seems better, but still not right. Every other white balance tool, you click on a pixel/area, and the tool turns that area neutral, eg. the RG and b channels are the same, and adjusts the rest of the image. In aperture it appears to do something else. not even the pixel under the tool ends up neutral, whether you're using the digital color meter, or whether you open it in psd and check there.
    am i doing something wrong? or is this thing still not right?

    Nope - it is still not right.
    In CS1 to CS2 the big improvement was the "smart sampling" of the colour picker. It seemed to make the best calculatiuons of the 3x3 pixel region.
    The fix has improved the quality (particularly the tint, but not the temperature as much). It is still really difficult to create a stamp for several white balance adjustments that works as it is too much by eye. Whereas with 1.0 I used ACR and re-imported, I can now use Aperture for 50% of the sodium lighting adjustments.

  • Paper feed not working

    Hello, Below are the sequence of events that happened and the problem I am facing: 1. I was able to use my HP 3510 printer print a page even 30 minutes ago. 2. After that, I tried scanning a page. The scanner got stuck many times. I opened the top lid of the printer and saw the scanner bar (I don't know how else to describe it) stuck in the middle. I restarted the printer and my computer and finally, after 6-7 retries, I was able to scan a page. Scanner has been working perfectly ever since. 3. After the scan was completed, I tried printing another page. The page feeder did not work. It showed me a "Out of paper. Load paper into the tray" message. I tried printing again by putting the page in more securely in the page feeder section but it showed the error again. I tried noticing what was happening and here is what I found out: a. The page was getting pulled into the printer. b. After the initial pull, the page stops once and the printer tries to pull in the paper again. But this time the paper gets pushed back out. When I look at the page, the top middle part (the end which was going into the printer first), is all crooked. ONLY the top middle part is crooked and the rest of the paper edge is the same. Every time I try to print a page, the same thing happens. The page is pulled in and then the print pushes it back the way the page came in and shows the "Out of paper" error.  What can I do to fix this issue? Thanks.

    Hi , Welcome to the HP Support Forums! I see you are running into some paper feed issues with your HP Deskjet 3510. Thank you for the detailed information. I would like you to go ahead and start troubleshooting here: HP Deskjet 3510 and HP Deskjet Ink Advantage 3510 e-All-in-One Printer Series - An 'Out of Paper' Error Message Displays on the Control Panel and the Printer Does Not Pick Up Paper Follow all steps listed above, focusing on the cleaning of the papers rollers. Let me know the outcome, I will watch for your reply. Thanks,

  • CS5 site setup not working

    I recently installed the CS5 version of Dreamweaver. When the program starts, I click on "dreamweaver site..." and the site setup dialog box pops up. "Unnamed site 2" is high lighted in blue. The only thing I can click is the folder Icon, help, save, and cancel icons. Nothing else works. I cannot click on Advanced Settings, Servers or Version Control. Does anybody know whats going on and how to fix this?

    I am also having the same problem. If I persist on clicking 'Advanced Settings' it will sometimes open but then I am unable to click on the 'Default Images folder' option and the 'Browse Folders' icon does not work. I can also not get to the other options with the mouse, such as 'Local Info', Cloaking' etc.As the previous person said, using the Tab and Cursor keys does work, but the mouse does not.It is only in Dreamweaver CS5 that I am having this problem.
    I too have a new Wacom Intuos 4 Tablet, just in case that could have anything to do with it.
    Running Windows 7 64bit with CS5 and all updates completed for everything including the Logitech mouse.
    Thanks in advance to anyone who can help.

  • LR 1.2 - white balance dropper not working

    When I click the white balance dropper, I get the magnifying glass. When I move it, the white balance in the navigator updates real time but if I click on my image it zooms instead of setting white balance. This worked fine with 1.1.
    Should I uninstall 1.2 and reinstall 1.1? I'm not sure how to go back to 1.1.

    I've had that happen a couple of times for no obvious reasons. I've also noted some general 'cursor confusion' but, again, I can't cause the problem.
    It's a minor annoyance.

  • Nokia Mail - "Other" Account Setup Not Working

    Help.  Nokia Mail Other/Manual Setup Not Accessible.
    A previously manually setup IMAP account got deleted from my C3-00.
    It is an account that requires manual setup, but when I tried to set it up again under "Other" the Nokia Mail App will no longer let me.  It had been working before and I inputted manual settings when it was previously set up.
    Now under "Other" instead of going from the mail address and password screen to the manual setup (POP3/IMAP) screen it just says: "Could not sign in. Try again."
    The email address is on the @mytyndale.ca and I need to input these settings manually:
     IMAP setting:  Server name: pod51011.outlook.com  // Port: 993 // Encryption method: SSL
    SMTP setting: Server name: pod51011.outlook.com // Port: 587 // Encryption method: TLS
    Please help or fix this for me. 
    If there is a way to force manual setup that I am missing let me know about that.
    NOTE: I was able to get the account setup by putting in an incorrect email address and then putting the correct login information in the manual setup  set up sceeen.  But Nokia Mail will not let my change my email address after the setup has been made.
    Phone Model: Nokia C3-00
    Firmware: 08.63
    Mail Revision: 2.0.24

    SunshineBC, on your desktop computer, when you go for webmail.eastlink.ca, are you able to login with your password? (double-checks we are using the right credentials). Are you able to log-in via webmail.dccnet.com?
    Now, let us double check the origin of your request (IP address outside of Canada). Please, try the same from within the Nokia browser of your phone because it does use a proxy based IP address. Does it work? If yes, please, try Opera Mini as well – because that useses yet another IP address. In all these browsers (yours on your desktop, in Nokia browser, and in Opera Mini), please, check your IP with my-ip.mobi. Please post your IPs and results (worked, did not work) and I check the location of that IPs if there is a did-not-work. Perhaps Eastlink has an outside filter in combination with some passwords – the procedures above checks that.

  • White paint will not work in Layer Mask

    I just installed PS CS6 and when I apply a layer mask to a layer I can paint black to hide the layer, but when painting white to restore the layer there is no effect.  White paint will not restore the layer or modify the mask at all.  The black paint works as usual to hide the layer, but how do I restore an area in a layer mask if not painting white?
    Thanks for any help with this.
    Troy

    That was it.  The blending mode for the brush was set to Darken which doesn't affect black, but obviously does affect white. 
    Thanks alot!
    Troy

  • Paypal IPN + Coldfusion 7 not working?

    I am trying to set up coldfusion to handle payPal IPN but I cant find any tutorials that explain how to get it to work, anything I find is out of date or I just cant get it to work.
    I've tried using the code on paypal developer site here:
    https://cms.paypal.com/cms_content/CA/en_US/files/developer/IPN_COLDFUSION.txt
    and I have enabled IPN on my paypal account but I'm not sure I've set it up correctly. Is there a way to check if paypal is even sending data back to my site?
    Been having a look and it seems the ipn I set up isnt even running. when I test the payment (i set up a basic ipn.cfm file that writes to a text file) it still doesnt work. Could there be a reason why paypal isnt running the ipn? If I go to the ipn.cfm file in a browser then the test txt file is created.
    Cheers!

    Hi Jeff,
    Can you let us know the directory location for wwwroot on your system.
    jeffcg2 wrote:
    That does not work. As soon as I put C:\ColdFusion10\cfusion in the Server Home I get the error Server Home Invalid. I have uninstalled Coldfusion 10 and re-installed added the latest updates. Coldfusion 10 is working fine running on IIS 7.
    Not necessarily. As soon as you select the "cfusion" location, it would automatically pick the wwwroot location.
    jeffcg2 wrote:
    With Coldfusion 10 , since you have C:\ColdFusion10\cfusion\wwwroot. as the Document root will this only work if you install the included web server?
    Regards,
    Anit Kumar

  • White Balance eyedropper not working?

    Hi all,
    Has anyone else tried doing a white balance adjustment in Aperture 2.0.1 with the eyedropper?
    In 1.5.x, it worked great -- I just clicked the eyedropper, clicked on a known-neutral-grey area of my photo, and the white balance was adjusted very well.
    In Aperture 2.0.1, I click on the eyedropper, then click on the same neutral-grey area, and for a second the photo adjusts beautifully -- then the white balance controls seem to randomly adjust back, and I get a photo that is no more color balanced than the original one.
    Is anyone else seeing this, and/or does anyone have any ideas why Aperture won't stick with the initial adjustment I'm seeing?
    Thanks in advance!
    \marc

    Still not working. I think the root cause of the problem is the mechanics of using the tool itself; I hope this screen shot shows up below ...
    Here I have APPLIED EFFECTS open, and have selected Midtones (Greys) to be expanded so that the eyedropper and other details appear:
    Now, just below where it has a box and "Impacted frame area in white" (which I know is a checkbox allowing the area effected to be seen), there is a little color box and an eyedropper.
    What EXACTLY do I do to select (activate) the eyedropper and subsequently tell the program what I feel should be grey in the selected clip?
    As mentioned before, I can click it and the cursor briefly changes to the same shape as the eyedropper. But as soon as I move the cursor a fraction, it changes back to an arrow (normal cursor) shape. Even then, going to the area I need to select in the image, and then clicking it, does exactly nothing to the appearance of the image shown -- even if the colors start way off. No correction at all. It is as if the tool does nothing. The color wheels below all this DO work however - it's just the eyedropper that doesn't do anything. This just cannot be Adobe's intention. I am convinced there must be some flaw in how I am selecting the tool itself. And the user guide - needless to say - is worthless in explaining the mechanics.
    So very frustrating. This appears to be the only thing wrong with the program - nothing else seems amiss.
    NOTE: To add insult to injury, this promised white/gray/black balance feature and the three-way-color corrector is the SOLE REASON I purchased the software. Funny.

  • My white remote is not working

    atv 1 is not working with my remote

    Welcome to the Apple Community.
    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

  • Adobe installers/setup not working

    I wish to re-install illustrator because fonts are disappearing without warning. BUT, when I put the cd in the drive and click set
    up I always get a critical error message that says " JAVASCRIPT ERROR  Critical errors found in setup":
    and here is the log for you just in case anyone wanted to see it.. Don't understand a word of it. Please please help. I have also tried setup and reinstall from the root drive in the mac itself, same message.  I have an intel 10.4.11.
    Right now photoshop is missing a folder that enables it to run and so I need to re-install something from the setup and I need Photoshop now, Im on a deadline.  BUT, this only happened because I did an archive and install to try and solve setup problem with  illustrator in the first place!!!
    Thankyou to whoever replies, i am very grateful
    Chris.
    May 1 16:13:49 chris-watts-computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: Started\n
    May 1 16:13:49 chris-watts-computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: This serv
    ice performs licensing functions on behalf of FLEXnet enabled products.\n
    SystemFlippers: didn't consume all data for DLOG ID 5237 (pBase = 0x533e400, p = 0x533e420, pEnd = 0x533e6c6)
    SystemFlippers: didn't consume all data for DLOG ID 5237 (pBase = 0x54a7a00, p = 0x54a7a20, pEnd = 0x54a7cc6)
    SystemFlippers: didn't consume all data for DLOG ID 5245 (pBase = 0x54b3600, p = 0x54b3620, pEnd = 0x54b38c6)
    May 1 16:14:26 chris-watts-computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: Started\n
    May 1 16:14:26 chris-watts-computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: This serv
    ice performs licensing functions on behalf of FLEXnet enabled products.\n
    Begin Adobe Setup
    UI mode: Full GUI
    2009-05-01 16:18:25.661 Setup[364] Calling AuthorizationExecuteWithPrivileges
    May 1 16:18:25 chris-watts-computer authexec: executing /Volumes/Adobe CS3 Design Standard/Adobe CS3 Design Standard/Setup.app/Cont
    ents/MacOS/Setup
    2009-05-0 1 16:18:45.926 Setup[385] Calling AuthorizationExecuteWithPrivileges
    May 1 16:18:45 chris-watts-computer authexec: executing /Library/Application Support/Adobe/Installers/R1/Setup.app/Contents/Ma cOS/S
    etup
    2009-05-01 16:18:47.321 Setup[364] wait result is: 368
    2009-05-01 16:19:03.094 Setup[385] wait result is: 386
    /XRefStm encountered but not yet supported.
    SystemFlippers: didn't consume all data for DLOG ID 5237 (pBase = 0x5269200, p = 0x5269220, pEnd = 0x52694c6)
    SystemFlippers: didn't consume all data for DLOG ID 5237 (pBase = 0x54a2e00, p = 0x54a2e20, pEnd = 0x54a30c6)
    SystemFlippers: didn't consume all data for DLOG ID 5245 (pBase = 0x54c9a00, p = 0x54c9a20, pEnd = 0x54c9cc6)
    May 1 16:22:16 chris-watts-computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: Started\n
    May 1 16:22:16 chris-watts-computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: This serv
    ice performs licensing functions on behalf of FLEXnet enabled products.\n
    2009-05-01 16:23:23.825 Setup[456] Calling AuthorizationExecuteWithPrivileges
    May 1 16:23:23 chris-watts-computer authexec: executing /Library/Application Support/Adobe/Installers/R1/Setup.app/Contents/Ma cOS/S
    etup
    2009-05-01 16:23:36.155 Setup[456] wait result is: 458
    (timer):Error in Actionscript. Use a try/catch block to find error.
    (timer):Error in Actionscript. Use a try/catch block to find error.
    Unsafe JavaScript attempt to access frame with URL https://www.adobe.com/cfusion/support/index.cfm?e vent=opentscase&loc=en_us from f
    rame with URL http://www.adobe.com/aboutadobe/contact.html. Domains, protocols and ports must match.
    Operating System: Mac OS X (v10.4)
    Type of network (server type and protocol for connection): broadband
    Has it ever worked? If so, what's changed? (provide comments in description field): Yes
    Same results with different file?: Not Applicable
    Same results with different computer?: Not Applicable
    Recent System Hardware or Software change?: No

    Bob, my problem is not wit illustrator, it is with setup.  I can not 
    remove adobe creative suite 3 because a setup dialogue box appears 
    saying that there are critical errors in setup, see log.  I can not 
    re-install anything because this is the message that I keep getting.  
    the problem is not illustrator, it is setup.  IE, when for example 
    you go to UTILITIES - ADOBE INSTALLERS.  This is the problem, 
    illustrator is not a problem because I can solve it if I were able to 
    reinstall.

  • Web-Based Setup, not working

    Hello...
    When I go to the Web-based setup...wireless/security..
    nothing is available.
    I can't change the keyphrase, or security type WEP WPA andy such darned thing.
    It's just not there 90% of the time.
    Then once in a blue moon it shows up.
    Upgraded all the firmware and such, factory default and the likes.
    It used to work at one time. If I could just drive there or contact the wizard of OZ maybe something might happen.
    help.
    Thank you
    Message Edited by crazygirl on 04-06-2008 06:47 AM

    I totally lost my internet connection via the router WRT54GS V6
    I am connected directly into the computer from my cable modem.
    I have tried everything. Upgarded firmware, factory default reset, setting the software again and again.
    When I run Easylink Advisor it always reads, no internet...like I said the modem is working when plugged directly into my computer.
    All proper lights are working on the router and modem.
    Could the router be just be broken?
    It seems to be getting worse and worse.
    help please.

Maybe you are looking for