Payroll  Idocs- Master Data Export - US( PC00_M10_OTEM )

Hi,
I have one issue with the IDocs created by Master Data Export- US Program.
Program Name : RPCEMDU0_CALL
Tcode : PC00_M10_OTEM
The Idoc's which are being created by this program having some wrong values for Benefit Infotypes.
Can anyone help me to know how the Idoc's are created and where the Idoc segments are getting filled with the data in this Program?
I have debugged the program but did't get any clues.
Thanks in Advance.
Regards,
Sudhakar.

Hello,
I have some helpful information.
The program that creates the IDOC is RPCOTM** where ** is your country version.
The results of the OTSEL feature are checked in RPCOMF** and then the routine FILL_DATES(RPCOTFX0) is called to write the IDOC. 
Debugging in this area will tell you...
1.  Is the OTSEL value for IT0041 set
2.  Was there a change in the dates for your period
3.  What is being written to the IDOC
Best of Luck
Dan Reeves

Similar Messages

  • IDOC : Create Master Data Export - transaction PC00_M10_OTEM

    Can someone throw some light on the transaction PC00_M10_OTEM - Create Master Data Export ?
    I need to know on what criteria it fetches the data for various infotypes. Its not picking data from IT0041 , what could be the possible reason ?
    Thanks,
    Sandip.

    Hello,
    I have some helpful information.
    The program that creates the IDOC is RPCOTM** where ** is your country version.
    The results of the OTSEL feature are checked in RPCOMF** and then the routine FILL_DATES(RPCOTFX0) is called to write the IDOC. 
    Debugging in this area will tell you...
    1.  Is the OTSEL value for IT0041 set
    2.  Was there a change in the dates for your period
    3.  What is being written to the IDOC
    Best of Luck
    Dan Reeves

  • Payroll - Master Data Export - US( PC00_M10_OTEM )

    Hi,
    I have one issue with the IDocs created by Master Data Export- US Program.
    Program Name : RPCEMDU0_CALL
    Tcode : PC00_M10_OTEM
    The Idoc's which are being created by this program having some wrong values for Benefit Infotypes.
    Can anyone help me to know how the Idoc's are created and where the Idoc segments are getting filled with the data in this Program?
    I have debugged the program but did't get any clues. 
    Thanks in Advance.
    Regards,
    Sudhakar.

    Hello,
    I have some helpful information.
    The program that creates the IDOC is RPCOTM** where ** is your country version.
    The results of the OTSEL feature are checked in RPCOMF** and then the routine FILL_DATES(RPCOTFX0) is called to write the IDOC. 
    Debugging in this area will tell you...
    1.  Is the OTSEL value for IT0041 set
    2.  Was there a change in the dates for your period
    3.  What is being written to the IDOC
    Best of Luck
    Dan Reeves

  • Master Data Export - PC00_M10_OTEM - Information

    Does anyone know where or if there is any detailed documentation on using the standard delivered Master Data Export program?  We are currently using it in production but have questions as to what/when/why certain information is picked up passed to ADP.

    Thanks for the information!  But I'm looking for more details such as:
    What triggers an IDoc to be created for an individual?
    How does the program pick which items get included in the IDoc?
    How do I trouble shoot why information came over, why some information keeps coming over or why some information isn't coming over?
    We keep seeing unexpected things coming over in our IDocs even though nothing was changed.

  • PC00_M10_OTEM - Master Data Export

    Hi,
    Whenever there is a change in any of the tax infotypes ADP is expecting do receive all tax infotypes. This functionality is not supported by SAP through PC00_M10_OTEM - Master Data Export. All we are sending are infotypes that were changed. 
    PC00_M10_OTEM - Master Data Export has a checkbox for sending all infotypes for all employees but thats also not what we are looking.  We need to send all tax infotypes for an employee even though only one is changed.
    Thanks
    -Bharath

    Hi,<br>
    Other options are
    #1 to develop an adhoc query for this requirement. Create four query with IT0,1,207,208,209,210. One will query the change date for IT207, second  query will check only for  IT208, 3rd only for IT209 and 4th for IT210.
    Then use union command to combine the output.
    #2 To develop ABAP report with same above logic
    Provide fdbk whether these post are helping you or not. If needed ask for more help.
    Good luck<br><br>
    Thanks,
    Amosha
    <br><br>"Known is a drop & unknown is an OCEAN!"

  • HCM IDOC : Create Master Data Export

    Can someone throw some light on the transaction PC00_M10_OTEM - Create Master Data Export ?
    I need to know on what criteria it fetches the data for various infotypes.
    Thanks,
    Sandip.

    seet his:
    http://help.sap.com/saphelp_dimp50/helpdata/EN/f6/2318b13cf011d2a62900104b56737d/frameset.htm

  • HR Master Data Export error

    Hi all,
    I'm working at a client where we upgraded from 4.6 to 6.0. This client has never used the master data export program.
    I'm trying to configure the master data IDOCs, but I'm having an error when running the program RPCEMDU0_CALL. It refers  to an OSS note back in 2001, so that really does not apply to this installation. The problem seems to be with function module HR_PU12_UPDATE_T532K_T532L on IT0106. Some sort of data dictionary discrepancies. I haven't been successful in finding any newer notes related to this.
    Has anyone experienced this problem before?
    Thanks in advance for your response.
    Cesar

    Hi Bernd,
    Thanks for your response. I looked at that OSS note but it doesn't seem to be realted to the problem I'm having.
    The error reads:
    "Export program terminated   A009
    Export program obsolete, regeneration required
    Do not regenerate immediately: First make a  $STRUC_P0106 back up of the include
    PERNR N 000008 000000
    (See note 375108) This include is very important if old cluster IF records"
    I've re-activated the program and interface formats, but still getting the same error.
    Thanks again,
    Cesar

  • InfoUser Master Data Export using scc8

    Hi Team,
    Iam doing User Master Data Export using scc8 .I have 1 question regarding this:
    1)When i took export using scc8 only 1 TR is created in cofiles folder and i cant see that TR in data-files folder.
    Can anybody help me in this??
    More info:
    We are going to rebuild the system so we need to preserve the user master record data.
    Regards,
    Abhilash
    Edited by: gundala$ on Feb 29, 2012 8:10 AM
    Edited by: gundala$ on Feb 29, 2012 8:10 AM

    Hi,
    Kindly go through the following link.
    http://forums.sdn.sap.com/thread.jspa?threadID=1310350
    Anil

  • Generating Master Data Export DataSources Error

    Hi Guys
       I 0VENDOR info object to be exported to other BI system . Iam using Generating Master Data Export DataSources. When I right click on 0vendor and say Generate export data source it shoud create 80VENDORM , 80VENDORT. But when I am doing that its saying generation successfull (what ever the success message)..when I go check the Infosources / Data Soruces / Info Provder and try to search 8zvendorM...I couldnt find this...Also I searched with vendor in all the tabs...Iam only finding 0VENDOR but not the new created once..Can any one tell me where should i check for it...Also ,please note that...Iam also using the same function Generate Export DS for one DSO and I can see this one in the Unassigned nodes of the Info Source TAb......
    Please let me know the sol ASAP
    regards

    Hi PB and Voodi
    I tried with Voodi's Sol and am still not able to find the 80VENDORM and 80VENDORT ....Where as PB's...I cant find the generated objects.in the settings tab...Can you please let me know what will be the issue and how to find this Data Sources....
    Please let me know ASAP...regards

  • Master Data Exporting

    Hi All:
    I have a problem with the generation of the standard master data Idoc with message type HROT_UM. When ever I prepare to send an Idoc to a third party tool, Here we are using ADP Connections. The Idoc being generated sends all the data, not only the changes. Does anyone have this problem? If anyone has done this before, a response is much appreciated.
    Thanks
    Venkata

    Just checkout the option "All data" in the selection screen and keep the update box always checked. This will make sure that only the delta records gets picked each time.
    Also, you can check in infotype 0415 to see whether the last exported date is being updated after the idoc is being sent.
    Cheers,
    Sam

  • SAP HR , Master Data Export. URGENT.....

    I want to Export Master data from SAP HR. I have made custom Interface Formate after modifying Standard Interface Formate 'OTMU'. I am using Transaction code PU12 and PC00_M10_OTEM. But it is not working.
    Please suggest me how to do so.
    Thanks,
    Mukesh

    Remember, we are all here to help so "urgent" does nto exist. I have moved your message to our HR forum in hopes that you will get an answer sooner.

  • IDOC:Master Data Records are not going to be updated after posting the IDOC

    I need to create employee Master data records in R/3 .I am using the IDOC HRMD_A07, though the IDOC posting is successful no tables, corresponding to employee master Data are getting  updated,
    Can anybody plz Let me know the possible reasons and solutions for this?
    Thanks in Advance,
    Sandhya

    hi i hecked the job log entries in SM37 in source system, the idocs were returned with '0' records. i took the Idoc number and checked in BD87 it displays some logs in that one node shows the red status with the detail as follow  IDoc entries in tRFC queue      3383
    the next one is green                Data passed to port OK                    1
    i selected the red staus node and clicked 'process'  button but it displays as
    The operation cannot be carried out with this node type
    wht should i do now, wht may be the reason for the datasource not pulling the data from R/3 to BI?

  • IDOC - Master data changes( through MM41 & MM42) to XI

    Hi Experts,
    My requirement is:
    Any updates/ changes to the article master through SAP transaction MM42 or any article creation through SAP transaction MM41 will trigger an update for the interface which will be picked up during the nightly batch job. For all updates/changes made throughout the day only the latest change will be interfaced to other non-sap system during the nightly batch.
    An IDOC will be generated for the changes made throughout the day by picking the latest one. IDOC name is WBBDLD03.
    Actually i am working on IDOC first time. I think i need to track changes in master data table through ABAP statements only and then a internal table ( with required data) need to be sent through IDOC. Please suggest if my approach is correct?
    Also, tell me the method to be followed for sending IDOC?
    Some examples implementing the similar scenario would be highly appreciated.
    Hoping for a useful response:-)
    Regards
    Gaurav K

    Hi,
    This is a change pointer scenario.
    IDOC:WBBDLD03
    Messge type:WBBDLD
    You need to write any code. You have to just make some ALE settings, this itself will meet ur requirement.
    First activate change pointer through BD61.
    Also activate change pointers for ur message type using txn BD50.
    Create LS for both sender and receiver (Use txn SALE)
    Assign the LS created to the respective clients .
    Create a rfc dest for ur receiving system using SM59.
    Later create a distribution model using txn BD64 (Here u mention ur receiver sender and message type )
    Create partner profile for ur logical system with this message type using txn WE20.
    Now you can trigger sending of the idocs through job schedule prg.
    But i dont know what is the prg name for ur scenario.
    I hope it helps you.
    Reward points.
    Thanks,
    Prasanna

  • XI IDOC Master Data Synch with Change Pointer (GLMAST)

    Hi,
    I have scenario to create integration between 2 SAP system with XI 7.0 using IDOC - GLMAST. I already acitvate Change Pointer Globally (BD61) and Activate Change Pointer for GLMAST (BD50).
    The problem is whenever changes have done in system 1, 2 IDOC generated, First IDOC  to Logical System PRODUCTION and second IDOC to Logical System SALES.
    In order to seding the IDOC i have scheduled report RBDMIDOC. My question is how i can modify the IDOC target port in stead of send to PRODUCTION and SALES to others port (XI in this case).
    Thank you and Regards
    Fernand

    Hi Prateek
    I already create partner profile and port for XI and add GLMAST. but then the IDOC generated alwasy sent to PRODUCTION and SALES partner profile.
    How to disable that IDOC to send to PRODUCTION and SALES partner profile and only send to XI Profile ?
    Thank you and Regards
    Fernand

  • Export master data - A beginners design question

    Hi,
    Business Scenario and requirement
    Master data export from ERP system to a legacy system. Integration engine is SAP XI/PI system.
    Question
    There are BAPI: s that can be used for this purpose. My question is as follows:
    1. Should SAP XI make call to the standard BAPIs to extract the data?
    OR
    2. Should we developed and schedule an ABAP module that calls the BAPI and exports the master data to a buffer table which in turn the SAP XI/PI can get the data from via a custom made RFC or BAPI?
    What is the usual way of working in these cases?

    Hi,
    First you need to select data from SAP and sent SAP XI using program.
    You can check the data using T code SPROXY, check this might be helpful.
    Regards,
    Sunil

Maybe you are looking for