Payroll not possible because data is missing: WPBP: 01 SV: 00 ST: 00

Hi,
I have created a new org structure with a set of employee. I have maintained all the needed infotypes ( 0000,0001,0003,0007,0008..)
When i try to run payroll for those emp's, im getting the error message:
<u>Payroll not possible because data is missing: WPBP: 01 SV: 00 ST: 00</u> under rejected personal numbers.
What setting i have to do inorder to run payroll.
Rgds,
Ven.

Hello,
How absen quota 2006 is related to payrun..
However i have maintained all the said infotype, but still get the error .
Rgds,
Ven.
Message was edited by:
ven onk

Similar Messages

Moved: Creation of new iViews not possible because templates missing

Hello,
sorry I moved this issue to "Portal Content Development"
Creation of new iViews not possible because templates missing
Regards
Alex
Message was edited by:
Alexander Lepka

Alex,
I'd be curious to know what SAP says. We have the same problem. Not sure how/if we broke it, but we can no longer create iviews using the wizard. I opened an OSS msg a while ago, but did not get much assistance.
We have recently upgraded to 2004s and it did not resolve the issue as I hoped it would.
If SAP provides a solution for you, please post it.
Thanks,
Shelly

Payment not possible because of reported error Message no. FZ311

i am a fresher in FI module... kidly give the solution how to solve the error in automatic payment program..f110...
i have attached my log here....
Job log overview for job:
F110-20140315-A1    -X / 13365701
Date
Time
Message text
Message class
Message no.
Message type
ABAP program
Screen no.
15.03.2014
13:36:59
Job started
     00
    516
     S
15.03.2014
13:36:59
Step 001 started (program SAPF110S, variant &0000000002023, user ID RAGU)
     00
    550
     S
15.03.2014
13:37:00
Log for proposal run for payment on 15.03.2014, identification A1
     FZ
    402
     S
15.03.2014
13:37:04
>
     FZ
    693
     S
15.03.2014
13:37:04
> Additional log for vendor 100263 company code ALRF
     FZ
    691
     S
15.03.2014
13:37:04
>
     FZ
    693
     S
15.03.2014
13:37:04
>
Due date determination additional log
     FZ
    799
     S
15.03.2014
13:37:04
>
Document 6
004 line item 001 via INR      200.000,00-
     FZ
    700
     S
15.03.2014
13:37:04
> Terms of payment: 15.03.2014    0 0,000 % 0 0,000 %    0
     FZ
    701
     S
15.03.2014
13:37:04
> 00 days grace period is being considered
     FZ
    726
     S
15.03.2014
13:37:04
>   Payment must take place before 15.03.2014; next payment on 16.03.2014
     FZ
    728
     S
15.03.2014
13:37:04
> Item is due with 0,000 % cash discount
     FZ
    721
     S
15.03.2014
13:37:04
>
     FZ
    693
     S
15.03.2014
13:37:04
>
Payment method selection additional log
     FZ
    699
     S
15.03.2014
13:37:04
>
Payment me
thod selection for items due now to the amount of INR      200.000,00-
     FZ
    601
     S
15.03.2014
13:37:04
> Payment method "C" is being checked
     FZ
    603
     S
15.03.2014
13:37:04
> Street or P.O. box entry is missing
     FZ
    617
     S
15.03.2014
13:37:04
> No permitted payment method exists
     FZ
    608
     S
15.03.2014
13:37:04
Information re. vendor 100263 / paying company code ALRF ...
     FZ
    305
     S
15.03.2014
13:37:04
... payment not possible because of reported error
     FZ
    311
     S
15.03.2014
13:37:05
End of log
     FZ
    398
     S
15.03.2014
13:37:06
Job finished
     00
    517
     S

Hello Experts,
I am blocked with a strange issue which is similar to FZ311 mentioned above.
Enclosing the screenshot for your reference.
I am bit confused whether anything needs to be configured within the FBZP or it is purely the vendor master data .
Any help will be appreciated.
Kind Regards,
Sanjay

New notebook HP635, first turn on is not possible because of: "no bootable device"

I have buy new notebook HP 635,
first turn on is not possible, because it write "no bootable device - select one"
hard drive is OK, and it should have sort of Unix on it,
contact support is truly not easy, because it is not able to recognize SN and PN:
PN: LH426EA#BCM
SN: 5CB1191MCH
(normal notebook, physicaly at home, buy 2 days ago)
What should I do to start instalation process?

hello
try press F11 while booting up laptop to force from recovery instaltion. If it not works maybe recovery is damaged or was no preinstalled system on it.
Try bios Hard Drive test to ensure hdd is ok.
If U have OS cd/dvd try from it.
If bios test is failed contact HP for hdd replacement if passed reinstall system.
If it wont be possible contact HP - Ur serial should defined in their system.
let me know.
BTW. heres page with HP warranty check where U can confirm warranty by serial number. If its there it should be also detected in HP data base.:
https://h20565.www2.hp.com/portal/site/hpsc/public/wc/home/
click on Kudos if i helped U

Error in CJ88 Posting transaction is not possible (value date not allowed)

When i try CJ88 with a wbs element, it shows the following error :
Posting transaction is not possible (value date not allowed)
Message no. AA 478
Diagnosis
A retirement was already posted on the asset 000022400733 0041 on 20091231. Based on the value date 20091231 of the transaction, this transaction should have been included in the calculation of values for the retirement.
System Response
The transaction is rejected.
Procedure
Check the value date of the transaction.
In need to put year 2009 in date of the transaction, but it isnt posible. ¿Why? I dont know very much about asset accounting...

Hi
It is not allowing for WBS element final settlement, because of your asset already retairement was done.
By best suggetion is, You will create the new WBS element and transfer the all cost line items from old WBS element to new WBS element, then you will try to settlement for another asset in CJ88.
I hope it will use for you.
Regards
PVCPVC

Posting not possible (Value date earlier than capitalization date)

Hello , we are getting the error shown below. I'am not sure where to go to fix this can any offer any advice.
Thank you
Posting not possible (Value date earlier than capitalization date)
Message no. AA 322
Diagnosis
Asset 000000040048 0000 was first capitalized on 20080831.
You cannot post to an asset that was not yet capitalized.
Procedure
You have the following options:
Change the asset value date of your posting.
Capitalize the asset by posting an acquisition.

Generally this message will come , if you have created a asset with a capitalization date say 31/08/2008 and you are settling a Internal order for last period say 07 on with a posting date earlier than capitalization date , say 15/08/2008.
The System will not allow you to post because the value date cannot be earlier than capitalization date.
Change the value date to later than capitalization date and post.

ABUMN-error "Posting transaction is not possible (Value date not allowed)"

Hi,
When we are trying to transfer asset within company code thru Tcode ABUMN, we are getting a error as
"Posting transaction is not possible (Value date not allowed)"
What actually we are doing is we are trying to transfer the previous year asset for example say 01.04.2007 assets on today.
the Parameters are as below
Document date :26.03.2008
Posting Date :26.03.2008
Asset value date is 01.04.2007.
Then the system is throwing an error and not alloing to post the previous year transfers.
Can any one help me out.
Cheers
Sri

Hi,
I think, if you give old asset value date, system will give you the error. This may be because, you are trying to transfer the assets with old values, means in your examble the dep. from the 01.04.2007 to 29.02.2008 whould have been charged.
So, give the current year date means any date from 01.01.2008 to till date.
If you read F1 help for the value date column, it states,
Asset value date
The asset value date is the value date for Asset Accounting. It can deviate from the posting and document date and be in posting periods already closed for Financial Accounting. However, the posting year and asset value date year must be the same.
Since the asset value date can have a direct influence on the amount of depreciation, the system creates a default value when it can. You can specify in Customizing how the the default asset value date is determined by the system.
Hope it helps
Saravanan.A

IPad constantly reboots every 2-3 minutes, after full recovery is not activated to wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more

IPad constantly reboots every 2-3 minutes, after full recovery is not activated to wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more than 6 months, so please call customer service apple can not. by DFU also restored Official Ipad bought in a store in Russia. When buying activated immediately. IMEI 013311005943507. Help please! the official service Moscow representation FDA ipad offer to send in the U.S. for $ 500!

Hello this is happening to us also (minus the Bluetooth speaker). We can't figure out what is causing the data usage. I turned off mobile data as soon s I activated the device, and got the message that unless I am connected to WiFi.....(that is exactly what I wanted). We watched Netflix for about three hours, then the alerts started. Like you we have many devices connected and never used over 2GB now all of a sudden we have used it in a matter of hours. My husband called Verizon and got the usual doubting Thomas response. I understand that they don't know my device settings. So over the phone we check all the settings and turned off every possible culprit eating up the data and end the call. By now I have purchased another gig for the month! Assured we are NOT using mobile data, we continue on the IE path to bliss. HA! A few hours later I check the mobile data usage on the Verizon website and that darn thing is still using data. After two more phone calls and two VERY uneventful trips to the local store we were told to take out the sim card. This has stopped the data usage, but it defeats the purpose of having the data plan. I could have just stuck with my Surface. Verizon sent us a new sim card. Its been installed and I have set my homepage to Verizon mobile data usage (just kidding) but I am on that site a lot. I am surprised at the number of complaints about this device. When we called the Verizon support acted as though this was the first time they had heard about this. Loved your post, you should write for a living.

Error message with offer to download the 4.1.B.0.587 update and note: "installation not possible" (because it's already there) cannot partition SD card

Hi - Recently I put the latest update on my LT15i (4.1.B.0.587), after this I rooted the phone, and everything seemed okay. But since then I keep getting an error message with an offer to download the 4.1.B.0.587 update and the note: "installation not possible" (because it's already there). The news line on top shows a red exclamation mark all the time. It seems to me that it is due to this error that I cannot partition my SD card. Does anybody have an idea how to fix that? Thanks much in advance, and happy holidays - nerissa

Moved thread to Android development.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

The upgrade of creative cloud is not possible because there is always the error code 204?

The upgrade of creative cloud is not possible because there is always the error code 204?

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-and try some steps such as changing browsers and turning off your firewall for downloads
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

When i want to download au video to work on it, it says that it not possible because of codec or something else i d'ont know how to say in english

When i want to download au video to work on it, it says that it not possible because of codec or something else i d'ont know how to say in english. It is impossible to do anything.

barbara.glet
Thanks for the reply. I need to zero in on your situation a bit more with your help...
When you go to import your .mts file into Premiere Elements 9.0/9.0.1 and you cannot, do you see this type of message only where your specific file
would be named as not support
From Premiere Elements 9.0/9.0.1 using Get Media/Files and Folders
or
Are up looking for your file in the space to the right and wanting to drag it to the Timeline, but you see the thumbnail
with the two arrows on page as seen in panasonic_lumix_dmc_ thumbnail in screenshot below.
But, that has two arrows, one red and the other green. And, you wrote that your two arrows were red.
Or something else other than what is shown above.
If it is as represented in the second screenshot, it is likely that you moved, deleted, or rename that file once it was imported
at another time into the Elements Organizer. In that case, we need to reconnect the file to the project. More on that later
once you supply the above details.
Thanks.
ATR

Functions not possible because of transfer to OLTP system

Hi gurus,
when i am doing /SAPAPO/VERMER, getting error like "functions not possible because of transfer to OLTP system" can you suggest me and elaboratly.
Thx
moon

turn off transfer to OLTP for both SNP and Deployment via SDP110.

Action not possible because change version exist

Dear All,
We are at SRM5.0- Extended Classic scenario and facing issues for changing some of the PO documents.
When the buyers are trying to change the PO, error is getting populated as 'Action not possible because change version exist'. This error is not allowing us to change the PO.
These POs are changed in the past and all the relevant changes are reflected to backend system with no issues. In other words Change Versions do exists for these POs. Flags for Change Version completion is also set and all historical versions can be seen but without change history.
Additional information -
1. No approval workflows are implemented for PO.
2. No locks are active for these documents.
Appreciate your help!
Regards,
Sagar

Hi Sagar and thanks for your response,
well, actually the active change version won't be preserved in any case. It would be overwritten in the first scenario, and deleted in the second one. The reason why I'd like to have this "brute force" method is to face an eventual human error. Suppose that a disalignment between R3 and SRM has been created; my report basically "alligns" the SRM version to the corresponding R3 one. And suppose also that the user made a mistake so that the program must be used a second time. I'd like to provide a way to "UNDO" the first execution of the program, that is to say: i'd like to provide a way to OVERWRITE the actual active, change version, or alternatively delete the change version that the report did create the first time it has been launched.
Hope it's a bit clearer now
Thanks for any hint/suggestion you can give me
EDIT: Oh, and please... can you provide me further information about your solution? I mean, use of that FM to unlock an active version of the PO and then the proper call to BBP_PD_PO_UPDATE specifying how you managed input params. Thanks a lot
Edited by: Matteo Montalto on Apr 9, 2009 11:43 AM

Logon is not possible because you have not been assigned to a business role; please contact your system administrator

Hi experts,
I'm having a problem when our project approaching the end.
If I assigned the business role in parameter CRM_UI_PROFILE and PFCG role in SU01.
It works fine,and the user can logon the web ui.
Now I created a new organization model and position,assigned the business role and user to the position.
A PFCG role was also assigned to the business role:
Then I removed all the roles and profiles in user master in SU01.
The user can not login CRM WEB UI and the system raised "Logon is not possible because you have not been assigned to a business role; please contact your system administrator".
Can anybody suggest what the problem is? Is there any other settings I should make?
I suppose that,since the user was assigned to the position the organizational model, the system can determine the user's business role, and through the business role, the corresponding PFCG role can also be determined.
Am I correct?
Thanks.
Jerry

Jerry, yes, you're right.
Let me point you to pretty good explanation right here: Logon is not possible because you have not been assigned to a business role; please contact your system administrator
So business role determination is taken in three steps (you can observe them in class CL_CRM_UI_PROFILE_DETERM method LOAD_PROFILES):
1. From user's parameter CRM_UI_PROFILE (method LOAD_FROM_USER_PARAMETER);
If CRM_UI_PROFILE = * then the user needs to have S_DEVELOP authorization object with OBJTYPE = 'DEBUG' (debug authorization).
2. If not found on previous step: From organizational management (method LOAD_FROM_ORG_MANAGEMENT)
3. If not found on previous steps: Based on PFCG roles (method LOAD_FROM_PFCG_ROLE);

Logon is not possible because you have not been assigned to a business role

I am getting the message u201CLogon is not possible because you have not been assigned to a business role; contact your system administratoru201D when I try to access an incident ticket SMIN I created in SolMan 7.1. I have seen this exact error in lower releases and was able to resolve it by making sure the business partner had a General and an employee configured. Unfortunately on 7.1 I have both but I still canu2019t open the message I created. Same error if I test SICF service /default_host/sap/bc/bsp/sap/ crm_ui_start. I have gone through SOLMAN_SETUP IT Service Management and Generate BP Automatically but no luck so far. Any ideas? Thank you,
David

Hi,
As far as I know, you need to maintain business org details (like org name, positions, business partners etc) in the ppoma_crm tcode. Then have to assign a position to your user ID. This assigns the business role as well.
This link should be helpful:
http://www.sapcrmsecurity.com/SAP%20CRM%20Business%20Role.html
Regards,
Srikishan

Payroll not possible because data is missing: WPBP: 01 SV: 00 ST: 00

Similar Messages

Maybe you are looking for