Payroll simulation
Experts,
when i am running payroll simulation an error coming as this
customizing error in work schedule rule
what to do?
GENPS
This error comes form GENPS
>Generation of Periodic work Schedule form XT00 Time Data
Compare the dats of
Holiday Calendar
DWS
DWSR
and Grouping of all these settings in V_T508A
Do it slowly
Similar Messages
-
Error - While running Payroll Simulation After HR Patch Update
Dear Gurus,
Below is the system Information
OS : AIX
DB : Oracle 10 g
Current Patch Level : HR : SAPKE60471 (Old was SAPKE60453)
Basis Patch Level : SAPKB70115 (Old was SAPKB008)
Now at old patch level payroll simulation was running fine and with no problem.
We update patches related to HR & Basis.
After that we are getting error in simulation of payroll which is attached here with.
Please let me have any solution.
This is our quality server. We apply patch for calculation tax rebate of Rs. 2000 for employees earning less then 500000 INR / year.Hi Irin,
The error says there is not entry in table V_T511K for country grouping 40 for Constant "S80EM"
Employee contribution % NPS.
All you need to do is
Go to V_T511K -> Country Grouping 40-> Create a Constant S80EM- and enter the constant value in the last column-> Run the payroll again.
Regards,
Hari -
Run time error while running payroll simulation
Dear All SAP HR experts,
I am getting an error in QA Server, This occurs whenever I run payroll simulation for an employees getting an error dump i.e .."TABLE_FREE_IN_LOOP" . The transaction code for which I am getting error is PC00_M40_CALC_SIMU.
Attached is the dump for reference.
Trigger Location of Runtime Error
Program SAPLRPIB
Include LRPIBU01
Row 165
Module type (FUNCTION)
Module Name RP_FILL_WAGE_TYPE_TABLE
Please help in this regard.
Thanks
Srinifunction module RP_FILL_WAGE_TYPE_TABLE
is generally used for reading the wage type assigned for indirect valuation (INVAL A,B,C,D)
check whether you are using any Z function in your payroll schema which might be giving problem
Also check with your basis guys whether QA server has any memory issues.
Regards
Sumit Pradhan. -
HR Forms Issue - Payroll Simulation
Hi all,
I have requirement to run HR Forms through payroll simulation.
When I run for certain scenario, at a time 9 periods are processed as below.
Each period is generating 1 HR Form each, totally 9 HR Forms are generated.
In the Form Interface, I have taken selection screen period and done all the calculations.
As I am taking the selection screen period, I am getting the 9 HR Forms with same data instead of getting different data for each period.
How can I modify my HR Form, so that I can get period relevant data?At last the problem is resolved by myself.
In order to get the period relevant data, we need to filter the tables in the context area of the adobe forms part in the HR Forms with the for period date.
Regards,
Naveen Maroju -
HR payroll simulation in closed periods
Hi everybody,
Does anyone know of a method to enable HR payroll simulation in periods, which are closed in FI transaction OB52?
Kind regards,
Karsten NorsHi Hugo,
Save you are payroll log with some Variant and Maintain the Feature "PM004"
The return value of this feature is "01/your Variant"
with you will be getting one Pushbutton in IT0008, if you click on that you will be able to see your payroll simulation for IT0008
Regards
<u><i><b>Anil.C</b></i></u>
<i><b>Reward the full points if my answer helps you out.</b></i> -
Off Cycle Payroll error - not encountered during Payroll Simulation
Hello,
We've modified the Canadian payroll schema K000 by creating some new subschemas, rules and payroll operations to address calculation of the factor /801. When running payroll simulation for a test employee, everything looks fine. However when we run off cycle payroll for the same employee and period, we are encountering an error. Checking the log of off cycle, it shows that it is also accessing schema K000.
What could have caused the OC error? is there a difference in what off cycle and simulation accesses?
Thanks.
Malou NaveraI assume that you copied the K000 and create a new custom schema called ZK00 or YK00 or something else other than K000.
Go to this table V_T52OCV and set up an entry with
CALC RPCALCK0 PayrollVariantName
"PayrollVariantName" is your variant with your custom schema for RPCALCK0.
Or goto IMG
Payroll: Canada
Off-Cycle Activities
Set up report variants for off-cycle activities
Edited by: Amosha on Oct 4, 2011 9:30 AM -
Error in payroll simulation rgdir already contains an entry with the same l
hi all
please help am having a problem when running a payroll simulation which says rgdir already contains an entry with the same logical key even when i run the correcting report i still encounter the same program
thnxDid you try to run SAP program to rebuild payroll directory RPUDIR00, as sometime this gets corrupted ?
-
PY : Need to run a custom HR Form in Payroll Simulation
Hi Experts,
I need to run a custom HR Form in Payroll Simulation for India PY ( PC00_M40_CALC_SIMU ) . The default form is IN01, how do i change that to my Custom Form. Plz help.
Thanks and Regards,
VishwasHi go to TC pe51,
Select form IN01 & Copy the form.
MHPO -
Taxes PCR not entered during Payroll SImulation
Dear Experts,
i created a taxes PCR, and when i run payroll simulation, in the log tree, the PCR exists but it is not processed for the wage types, and so no results come out of it !!
i have put it right before XNA9, and tried different locations in the schema, but yet nothing changed in the processing.
in the PCR i have used the results table (Amt+E XXXX, and ADDWTEXXXX )
and declared the PRC as PRT in the schema
i also tried to process the internal table (ADDWSIXXXX)
and declared it as PIT but nothing happens either.
Any suggestions ?!!
and could that have anything to do with the wage types processing classes ?!
Thanks in advanceHi Rovanna:
Have you used GEN in parameter 2 and NOAB in parameter 3 of your PIT call?
Let us know if that helps, otherwise share the code of your PCR, so it is easier to help you
Best regards,
Federico. -
Run payroll simulation in ABAP and get the payroll result in ABAP
Dear Expert,
Is there anyway I can simulate the payroll for a particular payperiod and employee in ABAP and then get the pay result for it in ABAP?
Please help
Best Regards,
WFI doubt it. If you run payroll in simulation mode then no clusters gets created. This means no physical commit on DB takes places once results are generated. On the other hand capturing the results in flow is not probably achieveable too. This would mean interfering in payroll inner calucation or capturing them at the end (once results are dispalyed). You can of course send them to spool but importing its content to ABAP would be meaningless as the output is in tree form.
So in my opinion there is no such way.
Regards
Marcin -
Hi All,
Am getting an error while running simulation for payroll.
Error message:Error while deriving the currency from table T001P , Error during intialisation of payroll.
I have checked in all tables.
Please find me a solution.
Suitable points will be rewarded.
Regards,
RaghuHi,
Found some similar thread.It might be useful.
payroll - Error while deriving the currency from table T001P
Manoj. -
Sort payroll simulation (payslips) by last name
Hello experts,
Is there any possibility to sort payslips TCode PC00_M01_CALC_SIMU by the last names of employees?
Thanks a lot in advance.
Regards,
Florian HeuerPayslips displayed in payroll driver are in in the order of the employees processed through logical dbase PNP/ PNPCE .
You could try to copy the current report caetegory currently assigned to the country's payroll drirver you're using, set the 'Sort allowed' field for this custom report category, and config your payroll driver to use this custom report category through T599W. This way, when running your country's payroll driver, it will have a sort option for you use if needed.
Rgds. -
Regarding an error in payroll simulation
hi everybody,
Iam getting an error like"Enter rate INR/EUR rate type M for 01.01.2007 in the system setting"
please reply as soon as possible its urgent.
regards,
HemaHi,
Table t510f has currency settings.
Chek v_t510f_b as well.
Regards,
RR -
Function Module to read RT values of simulation payroll results
Hi experts
Is there any function module where I can pass parameter to run payroll simulation and get RT cluster data or the final amount, before running the actual payroll.
Thanks ,
SaikumarHi,
Check the following function modules.
AISC_CALC_EXPIRED_USEFUL_LIFE.
Check the following link it might be of some help to you.
Re: asset useful life
Regards,
Ram. -
Function Module to read simulation payroll results in HCM
Hi experts
Is there any function module where I can pass parameter to run payroll simulation and get RT cluster data or the final amount, before running the actual payroll.Hi Nick,
Thankyou very much for the response.
The Function Module /SAPDMC/LSM_F4_SERVER_FILE is interactive wherein we can select only one file.
But my requirement is I need to collect (probably in an internal table) all the files exixting in the given UNIX directory.
Can you please find in that direction. I would be very grateful.
Thanks.
Sunil
Maybe you are looking for
-
When downloading songs from itunes, the first initial synch would be successful and would display the album art in both cover flow and album view. However after the second synch, the album art no longer shows up and is reduced to a black square in th
-
Webcenter PS5 - 11.1.1.6.0 Patchset Released
Hi All , Webcenter PS5 - 11.1.1.6.0 Patchset MLR 10 has been released on MyOracleSupport portal . Patch 15922432: WCC 11.1.1.6.0 BUNDLE (MLR 10)JAN 17 2012 https://support.oracle.com/epmos/faces/PatchDetail?patchId=15922432 This would include patches
-
PO price changes after partial MIGO
Dear All, I have created a PO for 100 Pcs with Rs 100 per Pc & have done GR for 50 Pcs. After 10 days i will get the remaining 50Pcs but the price has gone upto Rs 110 due to variations in market. So accordingly i changed the price in PO to Rs 110 &
-
Where can I find more synth "instruments" for GB??
I'm writing songs in GB for my band to play, and the keyboard player is using a 80s synthesizer. I'm looking to buy or (free download??) instruments that would better approximate actual synthesizer sounds. I'm very unhappy with the selection in GB. L
-
How to stop Goods Issue when settlement is not completed
An article was created in MM41. A production order number was assigned in KKF1. User proceed to create PO in ME21N for printing & miscellaneous expenses to be incurred for the same production order number. GR was carried out when the completed items