Payroll using time evaluation with clock times

Dear all,
I have configured an employee to have time management status 1, and my company would like to use attendance for time recording instead of time event since our clocking interface cannot provide exact clock times. I have also configured HRSIF to return 1 for all conditions.
I found every thing run correctly after creating the attendance records for all days of a payroll period while all attendance hours are equal to the planned work time. However, I have modified some of the days to attendance hours less than planned working hours (with no exact time inputted), I've noticed that the time evaluation can be processed successfully, but the attendance hours are not being calculated in the payroll result.
Does SAP actually support payroll for attendance with no exact clock time? If yes, what may I miss in my configurations?
Thanks
Steven

Hi,
Thanks for the advice.
For suggestion 1, yes, it can do I want if the attendance hours is actuall equal to the planned working hours. However, say I have a case that the planned working hours is 8, and a workman shows up for 6 hours and take 2 hours leave, the system still require me to enter the clock time in order to get the attendance and absence be calculated.
For suggestion 2, I understand that there's always be way if I do programming, however, my company decided not to do any customization, so I should first find if there's a default solution in SAP.
Thanks.
Steven

Similar Messages

  • About +ive Time Mgmt with Clock Time .

    Hi SAP-HR Experts .
    Plz give me idea about +ive Time Mgmt with Clock Time.
    I maintained , Infotype 50 , (created from 01.04.2007)
    When i tried to maintained Infotype 2011 . (from 01.04.2007) record is not created , it gives
    warning (date is with in selection period) when i press Enter Key over it , No record is created in infotype 2011 .
    I sat feature TMSTA = 1 .
    In infotype 7 , i maintained Time Mgmt status = 1 .
    I want to know what Time Evaluation Report (RPTIME00) will give to me ?
    How do i confirm my self that now SAP-HR is running on +ive Time Mgmt with Clock Time.?
    Please guide me ...
    Regards : Rajneesh (9873607039)
    Edited by: Rajneesh Kumar on Nov 18, 2008 6:02 AM

    Hi Rajneesh,
    When you run time evaluation through PT60 schema TM00 you will get the following:
    1. Clock in and Clock out entry
    All recorded time data documenting the actual attendance times or the actual absence times of employees.
    Actual time has the opposite meaning of planned working time.
    Example:
    According to the work schedule, an employee is supposed to work from 8:00 a.m. to 5:00 p.m. on December 3, 1999 (planned working time). The actual time data (actual times) from this day is shown below:
    8:00 a.m. to 2:30 p.m. Attendance
    2:00 p.m. to 5:00 p.m. Absence - doctor's appointment
    2. SKELETON TIME
    skeleton time is a time account in which payment-related times of an employee are managed.
    Skeleton time is determined in time evaluation.
    Example:
    Skeleton time in the standard SAP System consists of:
    u2022     Attendance, absence, and off-site work within a contractual period (start and end of working time)
    u2022     Overtime hours that exceed approved overtime
    u2022     Paid break times
    3. FLEXTIME
    Working time pattern in which employees can individually determine their own start and end times, as long as a certain number of hours is worked within a defined period of time each day.
    *4. FILL TIME
    A specific period of working time described in time evaluation that lies within the contractual start and end of working time (excluding breaks).
    If an employee works a flextime schedule and is also expected to be at work at certain times (core times), then fill time indicates the difference between the start and end of working time (without breaks) and the core times
    5. PRODUCTIVE TIME
    The usable working time for a resource. The system determines the productive time using the working time data and utilization rate for the resource as follows:
    Productive time = (End of working time - start of working time - break
    duration) x Rate of utilization / 100%.
    You estimate the downtime at the resource using the utilization rate.
    And the results of the following will depend on your settings...
    Time evaluation will update the quotas and it will form time balances
    I hope this information is enough to understand...for more clarifications revert to me..
    Regards,
    KPJ

  • Time Evaluation with multiple time events

    Dear Friends,
    I have an issue in our current project. Kindly try to help me with a solution.
    We are working on Time Management module with Positive Time Recording method and evaluation- India. (Payroll module is not implemented)
    My issue is:
    Evaluation with multiple time events in a day: In our project, we have a scenario like the employees record multiple clock in and clock out times for one day and are uploaded into infotype 2011. But during time evaluation, only first Time event that is P10 (Clock In) and the last Time event P20 (Clock-out) in a day should be considered for evaluation, ignoring any multiple time entries in between duration in the table TEVEN (Infotype 2011).
    Pls let me know how this requirement can be met. Do we need to define any new PCR’s or create any functions? If yes, pls tell me the process in detail as I am new and implementing Time management (Positive Time recording with Evaluation) for first time. Try to help me as soon as possible.
    Thanks & Regards,
    Chiranjeevi
    Edited by: chiran reddy on Feb 15, 2008 2:20 PM

    is it not possible to enter only the first p10 and last p20 from the time systems into 2011.

  • ESS Timesheet error with Clock Times

    Hi everyone,
    Has anyone seen this issue? (ERP 6.0, EP 7):
    Timesheet data entry profile is configured 'With Clock Times' and WITHOUT 'Release on Saving'.  On the daily view of the timesheet, when clock times are entered and Refresh or Review is depressed, the number of hours is populated and the following error displays:
    "Number of hours not valid when Start Time and End Time are entered"
    This only displays:
    -  when the profile is configured without 'Release on Saving' checked. When it IS checked, the error goes away.
    -  from the daily view (no clock times on the Weekly View)
    -  in the portal timesheet, not via CAT2 in ECC
    Any suggestions?
    Thanks!
    Message was edited by:
            Frederic Wood

    <u>Without checking 'Release on saving':</u> The system checks the number of hours value with the corresponding hours mentioned in IT0007.
    <u>On checking 'Release on saving':</u> It overwrites the number of hours stored in IT0007 in the back end system.
    This happens because this option has dependency with 'With Clock times' option. For this option, the system automatically deducts unpaid breaks, as determined in the employees's work schedule, when calculating the number of hours.
    If this helps, pl do reward.
    Thanks
    Narasimha

  • Can I use RAID 1 with a Time Capsule?

    Can I use RAID 1 with a Time Capsule?
    And if yes, how do I do so?

    Don't think that the firmware on the Time Capsule will support a RAID device at the USB port on the Time Capsule, if that is what you are planning to do.
    Even if it might, the connection will be about half the speed of USB on your computer. Better to connect the RAID to your computer and back up that way.
    If you plan to back up using Time Machine, check with the RAID manufacturer to see if that might be supported with the device.

  • Do i need to set up the time capsule airport before i start backing up using time machine with my time capsule?

    Do i need to set up the time capsule airport before i start backing up using time machine with my time capsule?

    Some setup is generally required.. because the TC is a network device.. not a plug in via usb.. therefore it has to exist somewhere in your network.

  • What is meant by Positive time mgt with clock & without clock?

    Hi Experts
    What is meant by Positive time mgt with clock & without clock? Plz explain with example experts..

    Hello Anniyan,
    Please check the below thread. Its a good beginner. 
    Positive & Negative Time Management Concept
    Please rewar if helpful.
    Thanks and Best Regards.
    Karan.

  • CTM set up time along with mfg time at supplier

    Hi All,
    where to enter the set up time along with mfg time at supplier in ctm ....Set up time is nothing but time required for the supplie r to procure his RMs and set up the mfg lines before commensing of prodn, lot specific.

    the setup time you define can be modeled as procurement time in procurement tab at supplier. Mfg time should be modeled in PPM as the operation lead time.

  • Using TIME MACHINE with a TIME CAPSULE

    There's often a bit of confusion about this terminology: +*Time Machine+* vs. +*Time Capsule:+*
    _*Time Machine*_ is Apple software that performs backups, to an external HD, a Time Capsule, etc.; and also allows you to browse and restore from them. It comes with Leopard and Snow Leopard, but cannot run on any previous versions of OSX.
    A _*Time Capsule*_ is a piece of Apple hardware that combines a wireless router and hard drive, that can be used for Time Machine backups and/or other data.
    Most Time Machine questions & problems are not unique to Time Capsules. For those, or if you don't find what you need here, try one of these:
    Time Machine - Frequently Asked Questions
    Time Machine - Troubleshooting
    They can also be found in the *User Contributed Tips* section of both +Time Machine+ forums:
    Mac OS X v10.5 Leopard > Time Machine
    Mac OS X v10.6 Snow Leopard > Time Machine
    Contents
    |
    QUESTIONS
    *Q1. How do I set up Time Machine to back up to my Time Capsule?*
    *Q2. How do I set up Time Machine to back up to a USB drive connected to my Time Capsule?*
    *Q3. Can I use my Time Capsule for Time Machine backups AND other data?*
    *Q4. My Time Capsule is too small to back-up my Mac(s). Now what?*
    *Q5. Should I delete backups? If so, how?*
    *Q6. How do I back-up my Time Capsule and/or USB drive(s) connected to it?*
    If you don't see your question here, try the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum.
    |
    PROBLEMS
    *P1. The Backup disk image could not be created.*
    *P2. Time Machine could not complete the backup . . sparsebundle could not be accessed. (Error 109).*
    If you don't see your problem here, try the Time Machine - Troubleshooting *User Tip,* also at the top of the +Time Machine+ forum.
    QUESTIONS
    |
    _*Q1. How do I set up Time Machine to back up to my Time Capsule?*_
    |
    First, set up your Time Capsule via +Airport Utility.+ Keep the name you assign to it, your Computer, and your network short (under 25 characters), and avoid embedded spaces, special characters, and punctuation (see item #P1 below for details). Make sure your Mac can connect via an Ethernet cable, if at all possible, as well as wirelessly.
    The setup and first backup (of your entire system) will be much faster if you connect via Ethernet.
    |
    a. If the +Time Machine+ icon isn't already in your Dock, drag it there from your Applications folder. See below for more about it's use.
    b. Right-click it and select +Open Time Machine Preferences,+ click the +Show Time Machine status in the menu bar+ box (see below), then click +Select Disk+ (on Leopard, this button will be either +Choose Backup Disk+ or +Change Disk).+
    c. A list of possible destinations will appear. It should include your Time Capsule (with the name you gave it via Airport Utility), and may show other internal or external drives as well. Select your Time Capsule and click the +Use for Backup+ button.
    d. A prompt for your name and password will appear. In some cases there won't be a Name field, but if there is, enter your short user name. Also enter the password you set up for the Time Capsule via Airport Utility, then click the Connect button.
    e. A 120-second countdown to the start of your first backup will appear in the +Next Backup+ area of the TM Preference panel.
    |
    Note that this first backup will copy the entire contents of your system, except for a few things that are skipped automatically, such as system work files, most caches, your logs, trash, etc., and anything else you may have excluded (see #10 and #11 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum). So it will be rather lengthy, depending on how much data is on your system, whether you're connected via Ethernet or WIFI, and if WIFI, how good the signal is.
    You can continue to use your Mac while TM is backing-up, and you can even cancel a backup if necessary, but to make this first full backup as fast as possible, try not to overload your Mac or cancel the backup.
    |
    _*The Time Machine Icons in your Menubar and/or Dock*_
    |
    In the steps above, you dragged the TM Application's icon into your Dock, and clicked the +Show Time Machine status in the menu bar+ box.
    For detailed info about them, see question #24 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum.
    +Go to Top+
    _*Q2. How do I set up Time Machine to back up to a USB drive connected to my Time Capsule?*_
    |
    Mostly the way you set it up to use the Time Capsule's internal HD.
    But first, attach the drive directly to your Mac, and erase and format it per the instructions in #5 of the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum. Note, however, that it doesn't matter whether you use the +Mac OS Extended (Journaled)+ or +Mac OS Extended (Case-sensitive, journaled)+ Format, since Time Machine will put your backups in a sparse bundle that's case-sensitive. You cannot change that.
    Unlike the Time Capsule's disk, you can partition the USB drive. That's highly recommended if you're going to be putting other data there, so the backups don't completely fill the disk (but be aware that Time Machine cannot back that "other" data up. See question #Q6 below).
    If you're backing-up multiple Macs to the same drive, you can make one partition for each, but it's not as helpful on a network drive, because each Mac's backups will be in a separate sparse bundle. So you can let them share the disk or a partition.
    Also note that if you've been doing backups to an external disk connected directly to your Mac, you cannot continue the same set of backups when you connect it to your Time Capsule. They are stored differently, and Time Machine will put them in a sparse bundle, alongside but *completely separate from* the backups made locally, and the first backup will be a full backup of your entire system.
    Once the USB disk is set up the way you want it, use the setup procedure in question #Q1 above, but in step (c), select the USB drive/partition, not the Time Capsule's internal HD.
    *RAID Sets connected to a Time Capsule:*
    |
    Time Machine will back up to a +Hardware Mirrored RAID set,+ also called +RAID 1,+ (sold that way, with multiple drives in the same enclosure). However, if you partition the +Hardware Mirrored RAID set,+ once you start using it with TIme Machine, you cannot change the sizes later and continue to back up to the same set of backups.
    While you can connect multiple USB drives to a Time Capsule via a USB hub (a powered one is best), Time Machine +*will not+* back up to a +software Mirrored RAID+ set (where you combine the drives into a single volume via Disk Utility).
    +Go to Top+
    _*Q3. Can I use my Time Capsule for Time Machine backups and other data?*_
    |
    You can put other data on your Time Capsule's internal HD, but there are three major considerations:
    Especially for things like photos and videos, access may be too slow for convenient viewing, and worse for editing. So test this a bit before you decide what to put there.
    Time Machine cannot back-up that other data, so you'll need some other method. See question #Q6 below.
    Time Machine will, by design, fill up all the space available to it, so there may be a conflict between the sparse bundle it puts your backups in, and the other data. There is a workaround, to "reserve" some space there, by creating a disk image of the desired size and storing your data there, but it's a bit cumbersome, and two Macs can't share it at the same time.
    An alternative is to connect a USB drive to your Time Capsule. Then you can back up to the TC's disk and use the USB drive for other data, or vice-versa. But note that Time Machine cannot back-up the USB drive while it's connected to the TC (see question #Q6 below).
    If you want to reserve space on the TC's internal disk, here's how:
    |
    a. Start the +Disk Utility+ app (in your Applications/Utilities folder). Click the +New Image+ icon in the toolbar (or select +File > New > Blank Disk Image+ from the menubar). If the little arrow to the right of the "Save As" box points down, click it so it points up.
    b. Give it a name in the "Save as" box. This name will appear on the TC's disk, with ".dmg" appended. (Similar to the way the sparse bundle containing your Time Machine backups appears, with ".sparsebundle" appended).
    c. Click your TC in the sidebar. It may take a few moments for Disk Utility to recognize it, and show it in the center pane.
    d. In that center pane, select the blue Share folder for your +Time Capsule+ (you may need to scroll down, or enlarge the window, to see it). Once selected, you'll see any existing disk images in the right pane.
    e. Give the Image a name. This name will appear on your desktop and/or Finder sidebar when you mount the .dmg by double-clicking it, if you have the +External Disks+ box checked in +Finder > Preferences > General+ or +Finder > Preferences > Sidebar.+
    f. Select the Size for the amount of space you want to reserve, either one of the pre-sets or Custom which allows any size. Avoid taking all the remaining space for the disk image, as Time Machine needs a bit of room to operate. Also note that if very little space is left, it will begin deleting old backups very soon, to make room for new ones.
    g. Select the desired Format, probably the default of +Mac OS Extended (Journaled).+
    h. If you want it encrypted, select the desired type.
    i. Select single partition, either GUID or +Apple Partition Map.+
    j. Select +Read/Write disk image+ for Image Format.
    k. Click the Create button. The larger the image size, the longer this will take.
    |
    When complete, the new disk image will be automatically mounted on your Mac's desktop, ready to receive the files you want to move into it. (When you first open a disk image, there may not be a sidebar and/or toolbar; if so, select +View > Show Toolbar+ from the Finder menubar.)
    To access this disk image from another computer, you must first eject it from this one, since only one can mount it at a time. Otherwise, the other one will see a message that the disk image is "Temporarily unavailable."
    Note that you may be able to change the size of the disk image later, via +Images > Resize+ from the Disk Utility menubar (while the disk image is not mounted or selected in Disk Utility's sidebar).
    +Go to Top+
    _*Q4. My Time Capsule is too small to back-up my Mac(s). Now what?*_
    |
    You can attach a USB drive to your Time Capsule. Then you can back up to the USB drive instead of the Time Capsule's internal HD. If you have multiple Macs, you can back some up to the TC's internal drive, and others to the USB drive.
    If you need even more space, you can connect multiple USB drives via a hub (a powered one is usually best), and back up different Macs to each. What you cannot do, however, is have one Mac's backups continue from the Time Capsule's internal HD to a USB drive connected to it, or have the backups for any one Mac "span" two drives.
    The exception is, you can connect two (or more) drives that are in a +concatenated RAID+ set (sometimes called +RAID 0).+ In that configuration, all the drives in the set are treated as a single volume (see +Concatenated RAID+ in the Help for Disk Utility for details). This configuration may cause some other difficulties; once they're in a RAID set, you cannot connect any drive to your Mac separately -- it's all or none. And if one drive fails, you risk losing everything on all the drives in the set.
    See question #Q2 above for setup instructions for backing-up to the USB drive.
    +Go to Top+
    _*Q5. Should I delete backups? If so, how?*_
    |
    It depends on exactly what you want to do, and why.
    Under normal circumstances, you shouldn't have to delete anything. TM automatically "thins" (deletes) backups every time it does a new backup, on the following schedule:
    "Hourly" backups after 24 hours (except the first of the day, which is a "Daily" backup).
    "Daily" backups after a month (except the first of each week, which is a "Weekly" backup.)
    "Weekly" backups are kept until TM needs the space for new backups; then one or more of the oldest weeklies will be deleted.
    However, TM will never delete the backup copy of anything that was on the disk being backed-up at the time of any remaining backup. So all that's actually deleted are copies of items whose originals were changed or deleted before the next remaining backup.
    But if you do need to delete backups, here's how:
    To delete individual backups, or all backups of selected item(s), see #12 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum.
    To delete everything on the Time Capsule's internal HD, use +*Airport Utility.+* Select +*Base Station > Manual Set-Up+* from the Menubar, then Disks in the tool Bar, then Erase.
    To delete everything on a connected USB drive/partition, you can delete via the Finder, but that may take a very long time. It may be faster to disconnect it from your Time Capsule, connect it directly to your Mac, and use Disk Utility (in your Applications/Utilities folder) to erase the disk/partition.
    To delete all the backups for one Mac, without disturbing anything else on the Time Capsule's internal disk, open the TC via the Finder and delete the sparse bundle associated with that Mac.
    To delete all the backups for one Mac, without disturbing anything else on a connected USB drive, either open the USB drive via the Finder and delete the sparse bundle associated with that Mac, or disconnect the drive from the TC, connect it directly to your Mac, and delete the sparse bundle from there.
    +Go to Top+
    _*Q6. How do I back-up my Time Capsule and/or attached USB drive(s)?*_
    |
    That depends to some extent on what you want to back up, and where it is.
    It's generally not a good idea to try to back-up your Time Machine backups. If there's a problem with them, it will be copied to (and perhaps magnified on) the copy.
    A better solution is probably to use either Time Machine or a different application to make separate, independent backups of your Mac, to a different destination. A portable external hard drive is great for this; you can periodically connect it to your Mac, make a backup, then take it to a secure off-site location, so you're protected against fire, flood, theft, direct lightning strike on your power lines, etc. If you use Time Machine for this, you'll have to use the disk selection process each time you want to switch, via +Time Machine Preferences.+
    Many folks use the CarbonCopyCloner or SuperDuper! apps to make "bootable clones" of their internal HD to an external HD. While these usually don't have "archived" copies of previous versions of things you've changed or deleted, you can boot and run your Mac from them if your internal HD fails. Your Mac may run a bit slower, but it will be usable. Both are easily found via Google.
    Since Time Machine cannot back up your Time Capsule's internal hard drive, or a USB drive connected to it, if you have other data there, you'll need a different method to back up that other data.
    In a pinch, you can disconnect a USB drive from your Time Capsule, attach it to your Mac, and copy or back it up that way.
    |
    There is a procedure that will let you "archive" the TC's internal disk to a USB drive connected to it.
    But it's not quick, since since the data must be read from the TC's internal disk to your Mac, then sent *back through the Time Capsule* to the connected USB drive. And it's "all or nothing" -- you can only use this procedure to copy the entire contents.
    All users will be disconnected from both the internal HD and the connected USB disk (but the network will remain usable).
    Attach a USB drive with at least as much free space as the total amount of data on the TC's internal HD (see #5 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum, for formatting instructions).
    Turn Time Machine "Off" via +Time Machine Preferences.+ Stop all processes that may be accessing the Time Capsule's disk. If possible, connect your Mac to the Time Capsule with an Ethernet cable -- it will still be slow, but faster than WIFI.
    Then follow this Apple procedure: Using AirPort Utility 5.3.1 or later to make a copy of the Time Capsule disk.
    +Go to Top+
    PROBLEMS
    |
    _*P1. The Backup disk image could not be created.*_
    |
    Oddly enough, Time Machine can be rather picky about the way certain things are named.
    Check your +*Computer Name*+ at the top of the System Preferences > Sharing panel.
    It must not be blank; it should not be more than 25 characters long; and you should avoid punctuation, spaces, and special characters.
    After changing it, click the Edit button and make the corresponding change to the +*Local Hostname.+*
    If that doesn't help, apply the same rules to the name of your Time Capsule and Network, via +Airport Utility.+
    +Go to Top+
    _*P2. Time Machine could not complete the backup .. sparsebundle could not be accessed. (Error 109).*_
    |
    The sparsebundle containing your backups is corrupted.
    Try Repairing it, per #A5 in the Time Machine - Troubleshooting *User Tip,* also at the top of the +Time Machine+ forum.
    If the sparsebundle is on your Time Capsule's internal HD, and Disk Utility can't fix it, your only option is to delete it (or erase the TC's disk), and let Time Machine start over. You may be able to prevent this from happening again by changing the names per problem #P1 above.
    If the sparsebundle is on a USB drive connected to your Time Capsule, and Disk Utility can't fix it, it's possible a heavy-duty 3rd-party +Disk Repair+ application, such as +Disk Warrior+ can. (You'll have to connect the drive directly to your Mac.) These are not cheap, and there's no guarantee they can fix it. Be certain whatever you use is compatible with your OS. For Disk Warrior, you need at least version 4.1.1 for Leopard, 4.2 for Snow Leopard.
    +Go to Top+

    This tip is ready for consideration.
    It is an update to the current Tip at: http://discussions.apple.com/thread.jspa?threadID=2296894
    Changes:
    Q1: replaced info about the TM icons with a link to the TM FAQ tip.
    Q2: added info about RAID sets attached to a TC
    Q6: reworded a bit and replaced last paragraph with a link to the Apple article.

  • Time Recording - HRESS_A_CATS_CALUI clock times

    Hello,
    We are trying to use the application HRESS_A_CATS_CALUI for time recording. But it allows to record time only in 30 min intervals. There is a drop down, from where we can select e.g. 08:00 and 08:30.
    Is it possible to reduce this interval or have field where it can be eneterd instead of dropd own.
    Thanks!

    Yes, you can reduce interval to 15 min, Follow the steps below-
    Run
    transaction SE80 and select package: PAOC_CATS_ESS_WDA. Select component configuration ‘HRESS_CC_CATS_CALUI_TIME_SEL’ (CATS
    Calender UI Configuration for time values) of web dynpro component: ‘HRESS_C_CATS_CALUI’ (CATS Calender UI )
    Double click and then click on ‘Display Configuration’ button to get following screen:
    Select ‘timeDiff’ to change the interval by clicking on Edit button later. you
    can select the ‘Time Difference’ as 15 minutes using dropdown while editing.

  • ESS - Time - Collision with another Time Entry

    Dear Sir,
    We have an Attendance Maintained (2002) for emp X today.
    When we apply for leave on same day (Absence - 2001) through PA30 System over writes the entry.
    (Not a problem)
    While we apply for leave throught ESS we are getting the error "Collision with another Time Entry" .
    Please let us know what all changes are to be done so that the system can accept the absence on same day on which attendance is there.
    Thanks & Regards
    Param

    Hi,
    1st check the Time constrain for the infoype with help of the HR functional consultant, try to make entry by Tcode PA30 if itu2019s a successfully done.
    Check the configuration by "PTARQ" Customizing options.
    Check the T-code "PTARQ" in that select "Post Document " in the Post Document selection screen 1st click upon the "Test Run" and then execute see the data is proper or not, Once you clear with the DATA is correct then again Run same report without clicking upon " Test Run" once you done with the posting then check the same by T-code "PA30u201D.
    Let me know the details

  • Issues using two-pass with dynamic time series?

    Is there any issues with using Dynamic time series [Q-T-D(May)] on a dynamic calc account which is defined as two-pass and has time balance property associated with it.
    The account is defined as "Dynamic Calc"+"Two-pass"+"TB First" and it works fine, but does not fetch result when used with DTS as Q-T-D(May). But, the same seems to work fine without the two-pass calc option on.
    Thanks in advance,
    cheers,
    revati

    Hi Revati,
    Yes u r right, I also tried with same scenario as you mentioned.
    Y-T-D values are not fetching with Twopass,but in that case Twopass is not required because of that member already having "Dynamic calc".
    so you can proceed with Dynamiccalc without twopass.
                   Actual                    
                   Sales     COGS     Margin     Margin %     Margin1 %
    New York     Cola     Jan     6000     5500     500     8.333333333     8.333333333
              Feb     5500     5000     500     9.090909091     9.090909091
              Mar     7000     6500     500     7.142857143     7.142857143
              Qtr1     18500     17000     1500     8.108108108     8.108108108
    With twopass          Q-T-D(Mar)     18500     17000     1500     8.108108108     #missing
    with out twopass          Q-T-D(Mar)     18500     17000     1500     8.108108108     7.142857143
    Praveenkumar.I
    TSPL
    mobile:09975686985

  • Can you use Apple TV with Face Time?

    Can you use Face Time on a MacBook Pro with an Apple TV?

    vazandrew wrote:
    It's worth noting that Mirroring will only work with specific, fairly recent, Macs
    http://www.apple.com/osx/specs/
    AirPlay Mirroring
    Requires a second-generation Apple TV or later. Supports the following Mac models:
    iMac (Mid 2011 or newer)
    Mac mini (Mid 2011 or newer)
    MacBook Air (Mid 2011 or newer)
    MacBook Pro (Early 2011 or newer)
    Infuriating but typical and predictably Apple.
    0 of my 5 Macs will have Airplay capability.
    AC
    (Though the 2 I use most will at least run Mountain Lion).

  • How do I extend my wifi using Airport express with my time capsul?

    I want to extend my wifi from my time capsul.  Can I do this with airport express?  I have my wifi with cable so would I need to get another modem and hook the express to that?  Would that help?  I want to keep the same network and not add another.

    You need to pay attention to something, while extending your network with the latest AirPort Express upgrade, your devices will be connected to it except your iPhone, you'll see your iPhone always connected to the capsule instead, even if you're at 1 foot from the AirPort Express.
    You need to change the radio settings from automatic to 802.11a - 802.11b/g on your capsule, then I put it back to the default settings...
    Now in the AirPort utility you should see your iPhone connected to the AirPort

  • Time Capsule not connecting to WEP printer.  Time Capsule set up for WPA2.  Can I use both standards with one Time Capsule?

    How do I get a WEP printer to connect wirlessly to the new Time Capsule set for WPA2?  High security is needed do to large Apt Complex.

    Actually, you can but it would require that you reconfigure the Time Capsule (TC) for "WEP (Transitional Security Network)." This Wireless Security option allows for both WEP and WPA clients to connect ... BUT does NOT support the AES/CCMP encryption protocol introduced by WPA2. Note: The WPA2 standard supports both the TKIP (used in WPA & WEP) and AES/CCMP (used only in WPA2) encryption protocols.
    If you require the stronger AES protocol, WEP clients or WPA clients that only support TKIP will not be able to connect.

Maybe you are looking for

  • Problem in my MacBook Pro Video Calling in Facebook

    I have problem when trying to start video calling in facebook, it always says "The video calling software encountered an error while starting." and it's very annoying because I can't use video call on facebook. I tried to follow instructions on how t

  • ADF ProcessScope -- I get a new AdfFacesContext on each page load

    I am trying to store some variables in the ADF processScope. But the next time the page is loaded and calls the managed bean methods, the AdfFacesContext is different, and so the processScope is empty. The managed bean is session scope, and I am sett

  • Music transfer from iPod to Laptop

    I have an iPod that contains music from 2 different computers (including one Apple Notebook). Can I transfer all the songs from my iPod (including the music from my old computer) to my Apple Notebook?

  • Select count into versus create table as in functions/procedures

    I am working on a dynamic PL/SQL script that will count the number of records in a remote database based on certain criteria and then if the number is "acceptable" will create a table in the connecting database with those records. My where clauses ar

  • Role not active

    Hello all, We are using CUA in our ECC6.0 system. Now  we have a problem with newly assigned roles as described below. User AA has a composite role XX assigneed already. There are some authorizations missing in this role so I assigned composite role