PB 3400 and 3500 parts

I've got a PB 3500 (original G3) that I'm trying to get up and running. Just a hobby (insert spouse eye rolling here), not my main machine, but I do love it anyway.
Here's what's happened, and what I've done: When I first got it it wouldn't power up - nothing, no chime at all. I could hear power though (a slight hissing through the speakers) when connecting the adapter. I reset by pushing and holding the reset actuator several times. Finally got the green sleep light to come on (steady, no blinking).
After a few more (maybe a dozen) resets I got a chime (YES!) and screen with the flashing floppy and ? It would then power on to the flashing floppy using the keyboard power button.
I inserted an OS 8 (and 7.5, and 9.1) cd figuring I'd wipe the drive and start fresh. Every attempt ended with a dialog box stating this OS will not run on this machine check your manual. These were all genuine Apple generic cd's, not machine specific cd's.
I decided to open it up and check connections (and make sure there was a hard drive). Everything seemed fine until I removed the cage holding the HD (yes there was one). I then noticed that the Power Management Board seemed loose - not really snapped in. I thought I had it figured out.
I snapped the PMB in, took the HD out and (with a another machine) repaired and wiped it clean and then reassembled everything carefully and tried again. But I'm back to where I started. It won't start up.
I've removed the RAM card and tried but no change. I've tried without the keyboard connected. I've tried w/o the PRAM battery connected. I've tried all kinds of combinations of these things. I've tried different power adapters. I've checked and rechecked all connections inside (keyboard, HD, etc.).
The results are the same:The keyboard power button does nothing. After resetting I can get as far as a steady green sleep light but that's all. I haven't heard a chime or seen a flashing floppy in dozens and dozens and dozens of attempts. So I'm stymied. Any one have any ideas?
Also, are PB 3400 and 3500 parts interchangeable (not the logic board obviously)? For example, can I use a 3400 power management board in this 3500? Or is it just the outer things like casing, screen, keyboard, cd module, etc that are useable?
Sorry about the novel-length post, and thanks in advance all.
PB G4 1.33 Ghz 15 PB 170 8mg OS 7.1   Mac OS X (10.3.4)  

Also, are PB 3400 and 3500 parts interchangeable (not the
logic board obviously)? For example, can I use a 3400 power
management board in this 3500? Or is it just the outer
things like casing, screen, keyboard, cd module, etc that
are useable?
Pretty much all parts are interchangable. If you google for "3400c exploded" (no quotes), the first hit (for me) is an exploded view drawing with parts list. A few of the parts have separate G3 and 3400 designations. Most are things like hard drives which are interchangable anyway.

Similar Messages

  • I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black.  My printer guy has been in and checked it out top to bottom and that part is fine.  I have tried to print the same docum

    I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black.  My printer guy has been in and checked it out top to bottom and that part is fine.  I have tried to print the same document and it comes out fine.  Any ideas ?   Using Windows 7 Service Pack 1

    Sorry my bad.  I have tried to print the same document on another printer and all the formatting is fine. 

  • How do I get albums out of "compilations'?  On one of my machined I can go to individual songs, "get info" and uncheck "part of a compilation", but that does not work on my office machine.  I would also like to be able to do this in  a group for an album,

    I don't know how so much of my music got lost by being labled "compilations"?  I would like to go back and catagorize it as it should be but the screens are gray and will not let me alter them as to the catagory I wish them to be in (or even the genere they are already labled?  On my home machine I can (by individual song) "get info and uncheck "part of a compilation" and when this is finished the album goes to the genere as it is listed?  Frustrating bit of hous keeping.  Help and Thanks  Chuck

    The Get Info. fields show up gray if the files is locked and iTunes knows it can't edit the file. Make sure the files are not marked as read only and, if necessary grant both your account and system full access to all files and subfolders of your media folder.
    You can set Part of a Compilation for multiple tracks from the Options tab of Get Info.
    See Grouping tracks into albums for tips on getting iTunes organized.
    tt2

  • Is there another way to close apps other than deleting them from the multitask bar.....I have a small crack in the bottom of my screen and that part of the screen does not recognize the touch.  :(

    Is there another way to close apps other than deleting them from the multitask bar.....I have a small crack in the bottom of my screen and that part of the screen does not recognize the touch. 

    There's generally no reason to be closing them that way at all. The apps you see in the recents bar are just that, apps that you used recently. Most of them are doing absolutely nothing. The only apps that are really doing anything in the background are ones that play music and ones that are using location services. Just leave them be.
    Best of luck.

  • How can I extract high and low parts of a string that represents a 64bits decimal number?

    I want to extract the high and low parts to interpret it and convert to binary code, but such a hugh number (represented by a string) isn't easy to extract from the string directly its high and low parts.

    LabVIEW can't handle a 64-bit integer. You will have to store it as two 32-bit integers. If you need exact math on those 64-bit intergers you will have to make up your own routines to handle the carries and what not. If you just need pretty good accuracy, covert both 32-bit integers to double, multiply the upper 32-bit number by 2*32 (also a double) and then add the lower 32-bit number to it.
    Good luck.

  • How to divide and load parts of Large Adobe AIR app for Android

    Hi!
    I want to create an app for Android but it will quite large. It will be larger than the 50MB offered by Google Play Store. This means that I need to find a way and break the app and load parts of it when I need them. Imagine it like minigames inside a bigger app.
    It is not clear to me how to achieve this since every time on AIR, I can export and APK file for a mini-game let's say. Can I later download APKs and integrate them into my main app? How would this be possible? Another question that I have is: In order for a SWF to play on my app, it needs to be built by AIR for Android?
    The best case would be to download content from In-App purchases and integrate in my app.
    But these things are not so clear.
    Thanks in advance for your help and support.

    I don't know how your application is structured, but if you can split sections off into separate SWFs(plain AS3 document) then you could host those section SWFs online and require the user to download them on first run.
    You could use the FileReference object to download the SWFs, save them to the File.applicationStorageDirectory, and then display/load them up with the Loader object when needed from the app storage directory. You would possibly need to check to see if the files are present at every boot of the app though as a user could "Clear Data" or "Clear Cache" of the app in the Settings of their device and one or both of those could/would delete the downloaded files.
    FileReference - Adobe ActionScript® 3 (AS3 ) API Reference

  • How to Export Team Site Site Pages to .aspx and for subsequent upload to other Team Site and Web Part Customisation included. (Powershell)

    Hi guys,
    Can i please technically know how to export an .aspx file (in Site Pages library of a team site) to local file?
    Basically, SharePoint Designer has this feature "Export File"
    i Need exactly the same feature that can be done in Powershell
    I tried the following
    $web = get-spweb "MY URL"
    $folder = $web.GetFolder("SitePages")
    $files = $folder.files
    #trying to download the first file
    [System.IO.File]::WriteAllBytes("C:\\LocalPath",$files[0].OpenRead(),$true)
    The file exported via this method is Clean HTML without the Web Part Customisation!
    I NEED the web part customisation in the exported files.
    Sample downloaded via above script
    <!-- Cropping -->
    <tr>
    <td id="_invisibleIfEmpty" name="_invisibleIfEmpty" valign="top" height="100%"> <WebPartPages:WebPartZone runat="server" Title="loc:LeftColumn" ID="LeftColumn" FrameType="TitleBarOnly"/> </td>
    <td id="_invisibleIfEmpty" name="_invisibleIfEmpty" valign="top" height="100%"> <WebPartPages:WebPartZone runat="server" Title="loc:MiddleColumn" ID="MiddleColumn" FrameType="TitleBarOnly"/> </td>
    <td id="_invisibleIfEmpty" name="_invisibleIfEmpty" valign="top" height="100%"> <WebPartPages:WebPartZone runat="server" Title="loc:RightColumn" ID="RightColumn" FrameType="TitleBarOnly"/> </td>
    </tr>
    <!-- Cropping -->
    I tried using WebRequest, it returns the  End HTML, which is not working too.
    Please if anyone has done this? Or is there any SharePoint Designer Developer here and is willing to share how to perform the export in SharePoint Designer via Powershell? API available?
    Much Appreciated!
    Cheng

    Hi,
    According to your post, my understanding is that you wanted to export Team Site Site Pages to .aspx and for subsequent uploaded to other Team Site and Web Part Customisation included using Powershell.
    You can export a specific file or object from the Export-SPWeb context.
    Export-SPWeb -identity "http://sharepoint" -ItemUrl "/default.aspx"  -Path "c:\default.aspx"
    Import-SPWeb -identity "http://sharepoint" -Path "C:\default.aspx"
    Here is a similar thread for you to take a look at:
    http://sharepoint.stackexchange.com/questions/56664/how-to-download-a-sharepoint-aspx-page-from-server-using-powershell
    More information:
    http://technet.microsoft.com/en-us/library/ee428301(v=office.14).aspx
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Before, when reading PDF files, I was able to copy and paste part of the book. Now it is not possible. I can copy but when pasting gets nothing.  Antes, quando lia arquivos PDF, eu conseguia copiar e colar parte do livro. Agora isso não é possível.

    Before, when reading PDF files, I was able to copy and paste part of the book. Now it is not possible. I can copy but when pasting gets nothing.
    Antes, quando lia arquivos PDF, eu conseguia copiar e colar parte do livro. Agora isso não é possível. Eu consigo copiar, mas quando vou colar o texto, não cola nada.

    Caro Fabiano,
    Obrigado por ter contactado as Comunidades de Suporte Apple.
    Na origem do seu problema podem estar várias causas. Nomeadamente:
    O ficheiro (arquivo) que está a ler pode não ser texto, ou seja, pode ser texto transformado em imagem e exportado como PDF.
    A aplicação de destino (onde está a tentar colar o texto copiado) pode não aceitar a colagem de texto formatado.
    A aplicação que está a utilizar para abrir os ficheiros PDF pode não ser indicada para certo tipo de documentos. Experimente o iBooks, o Dropbox ou até mesmo o seu e-mail.
    No caso de nenhuma destas causas estar na origem do seu problema, forneça, por favor, mais informações sobre a origem do ficheiro (descarga pelo Safari, Mail ou outro) bem como o destino (documento Pages, Keynote ou Numbers ou outra aplicação que não o iWork).
    Atentamente,
    Gonçalo Matos
    Estou aqui para ajudar. Clique no botão "Reply" no caso de ter outra questão ou necessitar de outro esclarecimento para que eu possa ajudar da melhor forma que conseguir.

  • How can i put one part in front and one part in the back?

    Alright i made this phone and a person and i want to put the bottom in front of his chin and the top behind the ear. How should i do this? Couldnt find anything in my classroom in a book, book.
    thanks

    The part in front and the part in back have to be two separate objects. Put a rectangle to completely cover the bottom part of the phone and let it mask the whole phone. Copy the clipping group (or duplicate its layer in the layers panel); on the copy, direct-select the end of the mask rectangle that doesn't bisect the phone and drag it the other way, so the rectangle now covers (and crops) the top half of the phone. If you do this on layers you need only make sure the phone-bottom is on the top layer, phone-top is on the bottom layer, and the person layer is between them.

  • Why is different between consumption and spare part material Amount in Accounting?

    I go to mb51
    in Accounting document there is different
    l found the standard price was changed in the last . it was changing from 850,000 to 1000
    i don't know why is different between consumption and spare part material Amount Accounting??? please help me . how can I solve it?

    pay attention just first document has a different accounting amount . in others there aren't different .see these screenshot :

  • I Took apart a mac mini 2007 and i cant put it back together and a part holding the cmos battery broke off

    I Took apart a mac mini 2007 and i cant put it back together and a part holding the cmos battery broke offplease i need serius help

    Yikes, see if anything here helps...
    http://www.ifixit.com/Teardown/Mac-mini-Model-A1283-Teardown/659/1
    And on yhe battery clip, do you suppose Super  Glue would work?

  • How can I edit and save parts of songs (like a chorus).

    How can I edit and save parts of songs (like a chorus).

    The iTunes-only way is:  figure out where you want your excerpt to begin and end.  Right-click the track, Get Info, Options tab, set the Start/Stop times accordingly, and OK out.  Right-click again, and choose Create XXX version (where XXX is the format indicated in your Import settings).  Right-click one more time, and unset the Start/Stop times.
    This procedure will leave the full track in place, and will create a new file and library entry with just your excerpt.

  • Supplier and Supplier Part Number in standard report BBP_BW_SC3

    Hi All,
    There is requirement like to add new fileds ,Supplier and Supplier Part Number in standard report BBP_BW_SC3(copy to z version).
    From which table i can get these values in SRM system.
    Please suggest.
    Thanks & regards,
    Rakesh

    Hi Walter
    Thank you so much for your reply, which indeed helped us to a great extent.
    The solution works fine for my original example of A & B material. However, we want to find every combination of lower level material used in each rolled up material. In above example, if material B is used in C, and C used in D and D used in final product E.
    The suggested functional module explodes the header material as per itu2019s BoM, and follows Top-down approach, whereas we are looking forward to find a link which shows Bottom-Up approach i.e. where-used approach. In above example, we want to start from lowest level material A, then B, and C till final product E.
    Since the output of functional module has various fields so we are trying to find a field which helps up to establish the bottom-up approach for multilevel BoM materials.
    Any inputs will be highly appreciated.
    Thanks,
    Nirav

  • Problem of jumping of serial no. of RG 23 A and C part II indian central ex

    Dear All,
    Client has been facing the problem of jumping of serial no. of RG 23 A and C part II indian central excise registers, which is a statutory offence under Indian Central Excise.
    Help me with your valuable advice to solve the problem.
    Regards
    Bijudas

    Dear All,
    I am not getting any response from anyone.
    If there is any solution to the problem, please advice.
    Regards
    BIJUDAS

  • How to create a part selection and a part list ALV in the same screen

    Hello,
    I will want to realize in a screen a part lists ALV and a part selection for the list.
    I have created a container with  a splitter , but I do not know how to carry out the selection part.
    Thank you for your assistance.
    Regards

    Hello
    If you want to have the selections and the ALV list displayed on the same dynrpo then create a dynpro that contains in the upper part the selection/input fields and in the lower part place a custom container for the ALV grid.
    If you want to be more flexible then you could use a subscreen for the selection/input fields.
    There is no point in using a splitter container because we cannot place normal input fields into a container but only controls.
    Regards
      Uwe

Maybe you are looking for