PB-G4 wont start after forced shut down

I had to force shut down my PB.when i tried to restart after few minutes | i got Blue screen with nothing else ( no progress spinning wheel or anything)\
I tried to boot from external. I get two arrows and a wrist watch which stops after a minute( the touch pad stops too after a minute)
I tried booting from Apple orignal PB CD. Same as above
I tried to install Tiger X from original CD.It wouldnt.
please help.I have valuable data on my HD.

Try things in Apple doc.#106464 for your startup issue.
Also, try using Disk Utility to repair your startup disk (hard drive) as shown in Dr.Smokes Resolving Disk, Permission, and Cache Corruption. Smokes link will help walk you thru it.
Cheers!
DALE

Similar Messages

Keep getting a grey screen with circle with slash at start up after force shutting down

My MacBook is fairly new (purchased in August 2012) and today it was running fine and began freezing... When this has happened in the past I have just force shut downed it, and it started up normally. This time around when I went to start it up I got the apple logo on a grey screen followed by a circle with a horizontal slash (like a do not enter sign).... tried to safe boot it and I got another grey screen but now with a folder icon. Please help!!!

Whoooo - if you have no backups (what were you thinking?) then hang on if you can and some wise soul may come across and give us a solution.
What you need to do is to repair your drive from an external. What happens when you do a 'Command+R' upon restart after the chime?
I also clicked on the stuff on the right and it is really dated! But current Mavericks' users will surely come along and address the issue. Until it is solved, please don't erase the installation, since you do not have a backup!

No audio in/out after force shut-down

I am running snow leopard at my macbook pro (2.4Ghz intel core 2 duo, 2GB memory), when the "force shut-down" window pop up. After restart, the speaker keep out of function, the display on the menu bar shows normal but no physical sound plays. All else is fine. confusing! Please help!
appreciate.
c.junxing

Start off with a flashing question mark appears when you start your Mac and then if you are still getting no where, run the Apple Hardware Test.

Unable to start weblogic - force shutting down

Weblogic admin server force shutting down, with the below dump... it is on windows 7...
===== FULL THREAD DUMP ===============
Thu Mar 21 12:41:47 2013
BEA JRockit(R) R27.6.5-32_o-121899-1.6.0_14-20091001-2107-windows-ia32
"Main Thread" id=1 idx=0x4 tid=4728 prio=5 alive, in native, blocked
-- Blocked trying to get lock: java/lang/Class@0x15AB9AE0[thin lock]
at jrockit/vm/Threads.sleep(I)V(Native Method)
at jrockit/vm/Locks.waitForThinRelease(Locks.java:1209)
at jrockit/vm/Locks.monitorEnterSecondStageHard(Locks.java:1342)
at jrockit/vm/Locks.monitorEnterSecondStage(Locks.java:1259)
at jrockit/vm/Locks.monitorEnter(Locks.java:2466)
at java/lang/Shutdown.exit(Shutdown.java:164)
at java/lang/Runtime.exit(Runtime.java:90)
at java/lang/System.exit(System.java:904)
at weblogic/Server.main(Server.java:87)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"(Signal Handler)" id=2 idx=0x8 tid=2200 prio=5 alive, in native, daemon
"(GC Main Thread)" id=3 idx=0xc tid=4500 prio=5 alive, in native, native_waiting, daemon
"(GC Worker Thread 1)" id=? idx=0x10 tid=400 prio=5 alive, in native, daemon
"(GC Worker Thread 2)" id=? idx=0x14 tid=5004 prio=5 alive, in native, daemon
"(Code Generation Thread 1)" id=4 idx=0x18 tid=5568 prio=5 alive, in native, native_waiting, daemon
"(Code Optimization Thread 1)" id=5 idx=0x1c tid=4048 prio=5 alive, in native, native_waiting, daemon
"(VM Periodic Task)" id=6 idx=0x20 tid=4224 prio=10 alive, in native, daemon
"(Attach Listener)" id=7 idx=0x24 tid=1628 prio=5 alive, in native, daemon
"Finalizer" id=8 idx=0x28 tid=4416 prio=8 alive, in native, native_waiting, daemon
at jrockit/memory/Finalizer.waitForFinalizees([Ljava/lang/Object;)I(Native Method)
    at jrockit/memory/Finalizer.access$500(Finalizer.java:12)
    at jrockit/memory/Finalizer$4.run(Finalizer.java:159)
    at java/lang/Thread.run(Thread.java:619)
    at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
    -- end of trace
"Reference Handler" id=9 idx=0x2c tid=5864 prio=10 alive, in native, native_waiting, daemon
    at java/lang/ref/Reference.waitForActivatedQueue()Ljava/lang/ref/Reference;(Native Method)
    at java/lang/ref/Reference.access$100(Reference.java:11)
    at java/lang/ref/Reference$ReferenceHandler.run(Reference.java:79)
    at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
    -- end of trace
"(Sensor Event Thread)" id=10 idx=0x30 tid=3640 prio=5 alive, in native, daemon
"JDWP Transport Listener: dt_socket" id=11 idx=0x34 tid=4120 prio=10 alive, in native, daemon
"JDWP Event Helper Thread" id=12 idx=0x38 tid=3428 prio=10 alive, in native, native_waiting, daemon
"Timer-0" id=15 idx=0x3c tid=3808 prio=5 alive, in native, waiting, daemon
    -- Waiting for notification on: java/util/TaskQueue@0x120011C0[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:485)
at java/util/TimerThread.mainLoop(Timer.java:483)
^-- Lock released while waiting: java/util/TaskQueue@0x120011C0[fat lock]
at java/util/TimerThread.run(Timer.java:462)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"Timer-1" id=16 idx=0x40 tid=4724 prio=5 alive, in native, waiting, daemon
-- Waiting for notification on: java/util/TaskQueue@0x12001578[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at java/util/TimerThread.mainLoop(Timer.java:509)
^-- Lock released while waiting: java/util/TaskQueue@0x12001578[fat lock]
at java/util/TimerThread.run(Timer.java:462)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" id=17 idx=0x44 tid=5008 prio=5 alive, in native, waiting, daemon
-- Waiting for notification on: weblogic/t3/srvr/T3Srvr$2@0x15AC6550[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Thread.join(Thread.java:1143)
^-- Lock released while waiting: weblogic/t3/srvr/T3Srvr$2@0x15AC6550[fat lock]
at java/lang/Thread.join(Thread.java:1196)
at java/lang/ApplicationShutdownHooks.runHooks(ApplicationShutdownHooks.java:79)
at java/lang/ApplicationShutdownHooks$1.run(ApplicationShutdownHooks.java:24)
at java/lang/Shutdown.runHooks(Shutdown.java:79)
at java/lang/Shutdown.sequence(Shutdown.java:123)
at java/lang/Shutdown.exit(Shutdown.java:168)
^-- Holding lock: java/lang/Class@0x15AB9AE0[thin lock]
at java/lang/Runtime.exit(Runtime.java:90)
at java/lang/System.exit(System.java:904)
at com/fedex/k2/webapp/servlet/IK2StartupServletContextListener.contextInitialized(IK2StartupServletContextListener.java:61)
at weblogic/servlet/internal/EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic/security/acl/internal/AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic/security/service/SecurityManager.runAs(SecurityManager.java:121)
at weblogic/servlet/internal/EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic/servlet/internal/WebAppServletContext.preloadResources(WebAppServletContext.java:1801)
^-- Holding lock: weblogic/servlet/internal/WebAppServletContext@0x1449CBA8[thin lock]
at weblogic/servlet/internal/WebAppServletContext.start(WebAppServletContext.java:3045)
at weblogic/servlet/internal/WebAppModule.startContexts(WebAppModule.java:1397)
at weblogic/servlet/internal/WebAppModule.start(WebAppModule.java:460)
at weblogic/application/internal/flow/ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic/application/utils/StateMachineDriver.nextState(StateMachineDriver.java:83)
at weblogic/application/internal/flow/ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic/application/internal/flow/ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic/application/internal/flow/ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic/application/internal/flow/ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic/application/utils/StateMachineDriver.nextState(StateMachineDriver.java:83)
at weblogic/application/internal/flow/ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic/application/internal/flow/StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic/application/internal/BaseDeployment$2.next(BaseDeployment.java:1267)
at weblogic/application/utils/StateMachineDriver.nextState(StateMachineDriver.java:83)
at weblogic/application/internal/BaseDeployment.activate(BaseDeployment.java:409)
at weblogic/application/internal/SingleModuleDeployment.activate(SingleModuleDeployment.java:39)
at weblogic/application/internal/DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic/deploy/internal/targetserver/AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic/deploy/internal/targetserver/BasicDeployment.activate(BasicDeployment.java:184)
at weblogic/deploy/internal/targetserver/BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic/management/deploy/internal/DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic/management/deploy/internal/DeploymentAdapter.activate(DeploymentAdapter.java:196)
at weblogic/management/deploy/internal/AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic/management/deploy/internal/ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic/management/deploy/internal/ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic/management/deploy/internal/ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic/management/deploy/internal/DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic/management/deploy/internal/DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic/t3/srvr/SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic/work/ExecuteThread.execute(ExecuteThread.java:201)
at weblogic/work/ExecuteThread.run(ExecuteThread.java:173)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"weblogic.time.TimeEventGenerator" id=18 idx=0x48 tid=1180 prio=9 alive, in native, waiting, daemon
-- Waiting for notification on: weblogic/time/common/internal/TimeTable@0x12001E70[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at weblogic/time/common/internal/TimeTable.snooze(TimeTable.java:286)
^-- Lock released while waiting: weblogic/time/common/internal/TimeTable@0x12001E70[fat lock]
at weblogic/time/common/internal/TimeEventGenerator.run(TimeEventGenerator.java:117)
at java/lang/Thread.run(Thread.java:619)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"JMAPI event thread" id=19 idx=0x4c tid=4752 prio=5 alive, in native, native_waiting, daemon
"weblogic.timers.TimerThread" id=20 idx=0x50 tid=3764 prio=9 alive, in native, waiting, daemon
-- Waiting for notification on: weblogic/timers/internal/TimerThread@0x144839C0[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at weblogic/timers/internal/TimerThread$Thread.run(TimerThread.java:267)
^-- Lock released while waiting: weblogic/timers/internal/TimerThread@0x144839C0[fat lock]
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" id=21 idx=0x54 tid=1840 prio=5 alive, in native, waiting, daemon
-- Waiting for notification on: weblogic/work/ExecuteThread@0x1447C848[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:485)
at weblogic/work/ExecuteThread.waitForRequest(ExecuteThread.java:157)
^-- Lock released while waiting: weblogic/work/ExecuteThread@0x1447C848[fat lock]
at weblogic/work/ExecuteThread.run(ExecuteThread.java:178)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"Thread-7" id=24 idx=0x58 tid=5156 prio=5 alive, in native, parked, daemon
-- Parking to wait for: java/util/concurrent/locks/AbstractQueuedSynchronizer$ConditionObject@0x12F80AC0
at jrockit/vm/Locks.park0(J)V(Native Method)
at jrockit/vm/Locks.park(Locks.java:2517)
at sun/misc/Unsafe.park(ZJ)V(Native Method)
at java/util/concurrent/locks/LockSupport.park(LockSupport.java:158)
at java/util/concurrent/locks/AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
at java/util/concurrent/LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
at weblogic/utils/concurrent/JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
at weblogic/store/internal/PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
at weblogic/store/internal/PersistentStoreImpl.run(PersistentStoreImpl.java:615)
at weblogic/store/internal/PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'" id=25 idx=0x5c tid=1880 prio=5 alive, in native, daemon
at weblogic/socket/NTSocketMuxer.getIoCompletionResult(Lweblogic/socket/NTSocketMuxer$IoCompletionData;)Z(Native Method)
at weblogic/socket/NTSocketMuxer.processSockets(NTSocketMuxer.java:81)
at weblogic/socket/SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic/socket/SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic/kernel/ExecuteThread.execute(ExecuteThread.java:145)
at weblogic/kernel/ExecuteThread.run(ExecuteThread.java:117)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'" id=26 idx=0x60 tid=4688 prio=5 alive, in native, daemon
at weblogic/socket/NTSocketMuxer.getIoCompletionResult(Lweblogic/socket/NTSocketMuxer$IoCompletionData;)Z(Native Method)
at weblogic/socket/NTSocketMuxer.processSockets(NTSocketMuxer.java:81)
at weblogic/socket/SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic/socket/SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic/kernel/ExecuteThread.execute(ExecuteThread.java:145)
at weblogic/kernel/ExecuteThread.run(ExecuteThread.java:117)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"ExecuteThread: '2' for queue: 'weblogic.socket.Muxer'" id=27 idx=0x64 tid=5300 prio=5 alive, in native, daemon
at weblogic/socket/NTSocketMuxer.getIoCompletionResult(Lweblogic/socket/NTSocketMuxer$IoCompletionData;)Z(Native Method)
at weblogic/socket/NTSocketMuxer.processSockets(NTSocketMuxer.java:81)
at weblogic/socket/SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic/socket/SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic/kernel/ExecuteThread.execute(ExecuteThread.java:145)
at weblogic/kernel/ExecuteThread.run(ExecuteThread.java:117)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"VDE Transaction Processor Thread" id=30 idx=0x68 tid=4260 prio=2 alive, in native, waiting, daemon
-- Waiting for notification on: com/octetstring/vde/backend/standard/TransactionProcessor@0x12F80720[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:485)
at com/octetstring/vde/backend/standard/TransactionProcessor.waitChange(TransactionProcessor.java:367)
^-- Lock released while waiting: com/octetstring/vde/backend/standard/TransactionProcessor@0x12F80720[fat lock]
at com/octetstring/vde/backend/standard/TransactionProcessor.run(TransactionProcessor.java:212)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"DoSManager" id=32 idx=0x70 tid=3492 prio=6 alive, in native, sleeping, native_waiting, daemon
at java/lang/Thread.sleep(J)V(Native Method)
at com/octetstring/vde/DoSManager.run(DoSManager.java:433)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"Thread-11" id=33 idx=0x74 tid=5936 prio=5 alive, in native, parked, daemon
-- Parking to wait for: java/util/concurrent/locks/AbstractQueuedSynchronizer$ConditionObject@0x12F80FA0
at jrockit/vm/Locks.park0(J)V(Native Method)
at jrockit/vm/Locks.park(Locks.java:2517)
at sun/misc/Unsafe.park(ZJ)V(Native Method)
at java/util/concurrent/locks/LockSupport.park(LockSupport.java:158)
at java/util/concurrent/locks/AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
at java/util/concurrent/LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
at weblogic/utils/concurrent/JDK15ConcurrentBlockingQueue.take(JDK15ConcurrentBlockingQueue.java:89)
at weblogic/store/internal/PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:567)
at weblogic/store/internal/PersistentStoreImpl.run(PersistentStoreImpl.java:615)
at weblogic/store/internal/PersistentStoreImpl$2.run(PersistentStoreImpl.java:383)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'" id=34 idx=0x78 tid=3976 prio=5 alive, in native, waiting, daemon
-- Waiting for notification on: weblogic/work/ExecuteThread@0x1447C920[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:485)
at weblogic/work/ExecuteThread.waitForRequest(ExecuteThread.java:157)
^-- Lock released while waiting: weblogic/work/ExecuteThread@0x1447C920[fat lock]
at weblogic/work/ExecuteThread.run(ExecuteThread.java:178)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"Timer-2" id=35 idx=0x7c tid=4992 prio=5 alive, in native, waiting, daemon
-- Waiting for notification on: java/util/TaskQueue@0x12F81018[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at java/util/TimerThread.mainLoop(Timer.java:509)
^-- Lock released while waiting: java/util/TaskQueue@0x12F81018[fat lock]
at java/util/TimerThread.run(Timer.java:462)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'" id=36 idx=0x80 tid=4668 prio=5 alive, in native, waiting, daemon
-- Waiting for notification on: weblogic/work/ExecuteThread@0x1447C9F8[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:485)
at weblogic/work/ExecuteThread.waitForRequest(ExecuteThread.java:157)
^-- Lock released while waiting: weblogic/work/ExecuteThread@0x1447C9F8[fat lock]
at weblogic/work/ExecuteThread.run(ExecuteThread.java:178)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"Session Monitor" id=37 idx=0x84 tid=4308 prio=5 alive, in native, sleeping, native_waiting, daemon
at java/lang/Thread.sleep(J)V(Native Method)
at com/icesoft/faces/webapp/http/servlet/SessionDispatcher$Listener$1.run(SessionDispatcher.java:315)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"Thread-1" id=14 idx=0xb0 tid=1404 prio=5 alive, in native, blocked
-- Blocked trying to get lock: weblogic/servlet/internal/WebAppServletContext@0x1449CBA8[thin lock]
at jrockit/vm/Threads.sleep(I)V(Native Method)
at jrockit/vm/Locks.waitForThinRelease(Locks.java:1209)
at jrockit/vm/Locks.monitorEnterSecondStageHard(Locks.java:1342)
at jrockit/vm/Locks.monitorEnterSecondStage(Locks.java:1259)
at jrockit/vm/Locks.monitorEnter(Locks.java:2466)
at weblogic/servlet/internal/WebAppServletContext.destroy(WebAppServletContext.java:3094)
at weblogic/servlet/internal/ServletContextManager.destroyContext(ServletContextManager.java:240)
at weblogic/servlet/internal/HttpServer.unloadWebApp(HttpServer.java:457)
^-- Holding lock: weblogic/servlet/internal/HttpServer@0x14508638[thin lock]
at weblogic/servlet/internal/WebAppModule.destroyContexts(WebAppModule.java:1424)
at weblogic/servlet/internal/WebAppModule.unprepare(WebAppModule.java:501)
at weblogic/application/internal/flow/ModuleStateDriver$1.previous(ModuleStateDriver.java:339)
at weblogic/application/utils/StateMachineDriver.previousState(StateMachineDriver.java:329)
at weblogic/application/utils/StateMachineDriver.previousState(StateMachineDriver.java:309)
at weblogic/application/internal/flow/ModuleStateDriver.unprepare(ModuleStateDriver.java:167)
at weblogic/application/internal/flow/ScopedModuleDriver.unprepare(ScopedModuleDriver.java:212)
at weblogic/application/internal/flow/ModuleListenerInvoker.unprepare(ModuleListenerInvoker.java:285)
at weblogic/application/internal/flow/DeploymentCallbackFlow$1.previous(DeploymentCallbackFlow.java:397)
at weblogic/application/utils/StateMachineDriver.previousState(StateMachineDriver.java:329)
at weblogic/application/utils/StateMachineDriver.previousState(StateMachineDriver.java:309)
at weblogic/application/internal/flow/DeploymentCallbackFlow.unprepare(DeploymentCallbackFlow.java:111)
at weblogic/application/internal/flow/DeploymentCallbackFlow.unprepare(DeploymentCallbackFlow.java:102)
at weblogic/application/internal/BaseDeployment$1.previous(BaseDeployment.java:1233)
at weblogic/application/utils/StateMachineDriver.previousState(StateMachineDriver.java:329)
at weblogic/application/utils/StateMachineDriver.previousState(StateMachineDriver.java:309)
at weblogic/application/internal/BaseDeployment.unprepare(BaseDeployment.java:495)
at weblogic/application/internal/SingleModuleDeployment.unprepare(SingleModuleDeployment.java:39)
at weblogic/application/internal/DeploymentStateChecker.unprepare(DeploymentStateChecker.java:205)
at weblogic/deploy/internal/targetserver/AppContainerInvoker.unprepare(AppContainerInvoker.java:117)
at weblogic/deploy/internal/targetserver/BasicDeployment.unprepare(BasicDeployment.java:287)
at weblogic/management/deploy/internal/DeploymentAdapter$1.doUnprepare(DeploymentAdapter.java:81)
at weblogic/management/deploy/internal/DeploymentAdapter.unprepare(DeploymentAdapter.java:220)
at weblogic/management/deploy/internal/AppTransition$7.transitionApp(AppTransition.java:75)
at weblogic/management/deploy/internal/ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic/management/deploy/internal/ConfiguredDeployments.unprepare(ConfiguredDeployments.java:204)
at weblogic/management/deploy/internal/ConfiguredDeployments.undeploy(ConfiguredDeployments.java:192)
at weblogic/management/deploy/internal/DeploymentServerService.shutdownApps(DeploymentServerService.java:188)
at weblogic/management/deploy/internal/DeploymentServerService.shutdownHelper(DeploymentServerService.java:120)
at weblogic/application/ApplicationShutdownService.halt(ApplicationShutdownService.java:142)
at weblogic/t3/srvr/ServerServicesManager.haltInternal(ServerServicesManager.java:504)
at weblogic/t3/srvr/ServerServicesManager.halt(ServerServicesManager.java:336)
at weblogic/t3/srvr/T3Srvr.shutdown(T3Srvr.java:986)
at weblogic/t3/srvr/T3Srvr.forceShutdown(T3Srvr.java:892)
at weblogic/t3/srvr/T3Srvr$2.run(T3Srvr.java:905)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"Thread-14" id=49 idx=0xc4 tid=5752 prio=5 alive, in native, daemon
at bea/jmapi/DiagnosticCommandImpl.execute(Ljava/lang/String;Ljava/io/FileDescriptor;)V(Native Method)
at bea/jmapi/DiagnosticCommandImpl.execute(DiagnosticCommandImpl.java:50)
at com/bea/jvm/DiagnosticCommand.execute(DiagnosticCommand.java:242)
at com/bea/jvm/DiagnosticCommand$Command.execute(DiagnosticCommand.java:394)
at bea/jmapi/ThreadSystemImpl.getThreadStackDump(ThreadSystemImpl.java:98)
at weblogic/platform/JRockitVM.threadDump(JRockitVM.java:61)
at weblogic/t3/srvr/T3Srvr.logThreadDump(T3Srvr.java:280)
at weblogic/t3/srvr/ServerLifeCycleTimerThread.run(ServerLifeCycleTimerThread.java:77)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
"[STANDBY] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'" id=50 idx=0xc8 tid=5500 prio=5 alive, in native, waiting, daemon
-- Waiting for notification on: weblogic/work/ExecuteThread@0x01C1A998[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:485)
at weblogic/work/ExecuteThread.waitForRequest(ExecuteThread.java:157)
^-- Lock released while waiting: weblogic/work/ExecuteThread@0x01C1A998[fat lock]
at weblogic/work/ExecuteThread.run(ExecuteThread.java:178)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
Blocked lock chains
===================
Chain 2:
"Thread-1" id=14 idx=0xb0 tid=1404 waiting for weblogic/servlet/internal/WebAppServletContext@0x1449CBA8 held by:
"[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" id=17 idx=0x44 tid=5008 in chain 1
Open lock chains
================
Chain 1:
"Main Thread" id=1 idx=0x4 tid=4728 waiting for java/lang/Class@0x15AB9AE0 held by:
"[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" id=17 idx=0x44 tid=5008 (waiting on notification)
===== END OF THREAD DUMP ===============

Hi,
This is a one off issue which occurred when there are thread dumps originating from WLS trying to determine if there are stuck threads in the system.
The upgrade to R28 is pertinent because these code level changes will not be feasible to be backported and that the code level fixes are included in R28.1.1.
Please upgrade the Jrockit version to R28.1.1.
Mark If this helps you.
Regards,
Kishore

Macbook pro froze during partition. after force shut down it, a part of hard drive lost

2011 15' Macbook Pro with Mountain Lion.
I was trying to use Bootcamp to install windows. Somehow I got confused and used disk utility to partition my hard drive and get 100gb for windows (before that it was 500 gb with 260gb free). And after 10 minutes the computer froze and I could do nothing but force shut down it. Rebooted and disk utility shows that it has 160 gb free space now. I repaired disk and permissions but none of them worked.
How can I get my 100 gb back? Help pls
Thanks

Check this link and see it any info will help.
http://pondini.org/OSX/DU.html
edit: added this discussion.
https://discussions.apple.com/message/19213226#19213226

After forced shut down iosx does not accept the password on the mcbook air

Hi there,
I cannot login into the mcbook air after having to force a shut down.
- While surfing with Safari, the mcbook froze for a longer period of time.
- We forced the shut down pressing the on/off button.
- After rebooting, we have a grayish screen with the apple logo, the user name, the password field and in the bottom three options: idle mode (rest), restart & shut down.
- When the password is entered, the wheel shortly turns and the mcbook stays with the same login screen without letting me enter the mcbook.
- When using an incorrect password the password-field shakes.
I tried booting with CMD + R and did check the volume and the access rights. Both showed no failures.
What could I try next to fix the problem? Ideally without having to set up the mcbook from scratch and losing the settings and data.
I do not know the exact IOSX status. It was bought in Nov-2012 and updated once since then I assume it is Snow Leopard
Thank you for your help!
Regards
Lottchen2007

If you can boot into the Recovery Volume, it isn't Snow Leopard.
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)

After forces shut down,restart returns to you tube with no screen

The screen of my Mac book pro has gone black. The key board is lit up and the sound is good. After restarting it, the same you tube site was still on as before I shut it down.

Welcome to the Apple Support Communities
If you are using Lion or Mountain Lion, it automatically starts all the applications that you had opened when you turned off your Mac

Really Slow Start-Up, force shut-down, only with one user....

Lets see. I've had this puppy since August of 2005. We've been through a lot together. Im sure this is apple telling me to buy a new computer BUT all I want is to make sure I do not lose ANYTHING of importance. THE PROBLEM:
So, I used my computer on Saturday, came home late on Sunday to check my e-mail. And I turned it on, logged into my Administrator account and go distracted, 30 minutes later the desktop hadn't fully loaded. The background picture came out, the tool bar from the little apple to the Help loaded, but my google notifier, airport and time and finder did not load. The application bar at the bottom loaded, but nothing happened if i moved the mouse over it. I had maybe 10 files and 4 folders on the desktop, so i tried moving them. I logged into another account to delete stuff I didnt need. It got a little better. I was able to actually move the folders into the HD icon on the desktop, and TRIED to take the picture off the desktop, but I ended up having to go to bed after hours of trying to fix it.
I would have copied everything to disks, but a few months ago my CD/DVD ROM failed. Well, I never got it looked at because i've been in transition to LA. But it just spits any disk that is put in.
I thought maybe I have too much stuff on the HD, causing it to be slow, but its not even 1/2 full. So that really can't be it.
I have 2 accounts on my iBook. One is mine, the Administrator and the second is the Guest account for anyone borrowing my computer. I tried logging into the Guest account and it works perfectly. No problems with it at all. I am sooooo confused as to why overnight there is another problem with my computer. I have an appt with a Genius on Thursday, I do have my OSX Install Disks. I just found them!!
Any thoughts or suggestions GREATLY appreciated.

I've been trying to help another individual with an issue similar to yours. That case is a little less extreme--only certain applications cause trouble, not the whole works.
http://discussions.apple.com/thread.jspa?threadID=1862986
See if any of that helps you. If not, it's probably best to ask the Apple experts when you go see them--my final idea is to erase and install the OS, which isn't an option for you since the CD/DVD drive doesn't work.
~Lyssa

After having shut down after installing updates, when I restarted and tried to open a word file, it started opening ALL the word docs and the only way I could stop it was by"force quit" arted and tried to open

After having shut down after installing updates, when I restarted and tried to open a word doc, it started opening ALL the word docs and the only way I could stop it was by"force quit" . This is REALLY annoying!!

May be it is the Resume feature.
System Preference > General > Number of recent items
Uncheck the box next to "Restore windows when quitting and re-opening apps".
Best.

I tried to reload my Ipod touch. I accidently selected "start new ipod" icon on the Ipod and then "back up existing ipod" on Itunes. Now the Ipod is unresponsive, constantly shutting down and restarting. Even after multiple "forced" shut downs. Help!

After updating the os, I tried to shut down, clear and reload my Ipod touch. Here's where I goofed: at the prompt for starting the reload process, I selected "start as new Ipod" on the Ipod, but in Itunes, I selected " back up existing Ipod from computer" or something like that. Now the ipod is constantly shutting down and restarting and no controls can be accessed. All I can do is the "forced shut down" which I have done multiple times and let sit for a half hour off.

Disregard, hooked up to itunes and clicked on summary, selected restore, all is well.

Pc wont shut down properly i have to force shut down each time.

I have recently started using firefox. Everytime i shut down the pc it will not shut down automaticlly...It says firefox is waiting for a programe to close and for windows live messanger to close..I wait and nothing Happens so in the end everytime i have to force shut down my pressing force shut down button. This also happens on logging off to switch to a diffrent user. This happens everytime i close down.

The following may not completely eliminate having to terminate Firefox through the Windows Control Panel but it will come very close.
'''Plug-in and tasks started by Firefox may continue after attempting
to close Firefox''' The "X" in the upper right-hand corner closes the
Window (same as Ctrl+Shift+W) but even if it is the last Firefox window,
it does not necessarily close Firefox .
The only '''proper way to exit Firefox''' is to use '''Exit''' through the
File menu, not the "X" in the upper right corner of last Firefox window.
In the Beta that would be Alt+F then X
* '''Firefox hangs''' | Troubleshooting | Firefox Support <br>http://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit
Use the '''Windows Task Manger''' to remove all running firefox.exe in the "'''Processes'''" tab of the Windows Task Manager, then restart Firefox.
If Firefox will still not start, remove the parent.lock file from the profile which is created each time Firefox is started to prevent other Firefox tasks from running, see<br>
http://kb.mozillazine.org/Profile_in_use#Remove_the_profile_lock_file
'''Avoiding Problems with close/restart''' ''choose either extension''
:Use to close and restart Firefox after enabling or disabling an extension, switching to a new theme, or modifying configuration files, then you don't have to worry about delay or have to look in the Task Manager to see if Firefox is closed yet.
Both extensions use the same keyboard shortcut "'''Ctrl+Alt+R'''" or a file menu option.
*"'''Restartless Restart'''" extension for Firefox 4.0+ only (2 KB download ) <br>https://addons.mozilla.org/firefox/addon/249342/
Firefox 5.0 now available in my area anyway "Ctrl+H" (Help) > About Firefox

My Macbook Retina doesn't log back in from sleep after typing in the password, have to force shut down

Hi all,
Recently i've been having this problem once in a while (once every few days) that when I opened up my computer from sleep, I typed in my password and clicked enter. After that, it shows that normal grey box thing; normally it logs in after a few seconds, but sometimes i wait for 2 minutes and still it doesn't log in. I sleep it and wake it again, but this time i type the password and i click enter, but nothing happens, i can't click switch user either. At this point my only choice is to force shut down my macbook. This problem is a bit annoying since sometimes i have unsaved work.
Thanks in advance for any reply/ies.

Press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly to restart.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Slow start up and shut down after Zenworks installation

I hope someone can help me out on this one. Not sure if I am posting the
right forum or not but here we go. After I installed Zenworks on our PC's
here at work, we have a noticed a distinct difference in how long it takes
for the PC's to start up and shut down. Before installation, everything
was very quick, like it should be. Now it seems to take some users 3-5
minutes to start and shut down their PC's. The machines are running
several different OS'es. Windows 98SE, Windows XP Pro SP1 and Windows XP
SP2. No one OS has more problems than the other. Has anyone heard of
Zenworks causing this issue or heard of a way to prevent this? I would
really appreciate any help you can provide.
Thanks!
Jami Benson

On Thu, 20 Dec 2007 09:12:26 GMT, Rolf Lidvall wrote:
> See this article by Shaun Pond:
> "Using Search Policies Effectively in ZENworks"
> http://www.novell.com/coolsolutions/feature/15294.html
I would also suggest to get either some training or self study material or
read the online documentation
Marcus Breiden
If you are asked to email me information please remove the - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.didas.de

G4 MDD FW800 starts up and shuts down after several seconds

Hi all,
My G4 MDD FW800 DP.1,48 starts up and shuts down after about 20 seconds. I Have reset PMU and checked battery voltage, witch was OK. (also had it out for 30 minutes with no power connected etc.) I have video and also tried with NOTHING connected. But still it just powers down and failes to enter start up procedure.
Last time I had it running I pulled my iPod, beacause the computer did't see it, the next thing I saw on screen was the message to hold the power button for 5 to restart, after that I got the problem described above.
Anybody?
Thanks,
G4 MDD FW800 DP1,48 Mac OS X (10.4.2)

Hi, I don't know how fast it shuts down, but...
How to reset the SMU/PMU on a Power Mac earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/ht1379
In fact, do 3 in a row, takes a bit of time.
Does it boot into Open Firmware with CMD+Option+o+f ?
http://docs.info.apple.com/article.html?artnum=42642
reset-nvram (press Enter)
set-defaults (press Enter)
reset-all (press Enter)

Computer starts spontaneously after I shut down

After I shut down my computer it will start back up automatically. I've already gone through tech support and updated everything as well as gone into the BIOS and made changes. After doing this twice HP sent out a tech and replaced the motherboard and power supply. A week later it has started doing the exact same thing. I bought this computer a little over two months ago. It's an Elite Desktop model. Help please.

Hey jshimp,
I'm sorry you're having this type of issue so soon.
Has the Power button been looked at or replaced? Could it be getting stuck?
I would recommend speaking with tech support again and letting them know that the motherboard and power supply have already been replaced. Ask about if any exchange options are available considering the time period.

PB-G4 wont start after forced shut down

Similar Messages

Maybe you are looking for