PB Hard Drive not booting

My PB computer was on for a day or so and when I went to use it it would not wake up from sleep - I assume it goes to sleep after the screen saver runs for a while.
I turned it off using the Power switch. and turned it back on but it only goes a far as the gray screen with the Apple logo. No spinning wheel or progress bar.
I then booted from the 10.4.11 Install disk, ran Disk Utility and it reported the following:
Error: The underlying task reported failure on exit.
Volume could not be repaired because of an error.
I then ran the Tech Tool Deluxe 3.1.1 disk which I got with my Apple Care back in 2006. It ran all tests except Surface Scan and reported problems in several categories relating to Volume Structure. I went back and included surface Scan. It found 18 errors but seemed to get hung up after 5 minutes.
After rebooting to the TT disk, it is now not finding my hard drive!
Would an updated Tech Tool or Disk Warrior be likely to repair the drive? Am I likely to be able to recover files from the hard drive? Thank you for any advice you have!

Thank you for the info. when booting to the hard drive i now hear a clicking sound sort of like a very loud clock - not exactly in perfect time though it started that way initially. I envision an armature bouncing within the hd? I think I first started to hear this when Tech Tool started the surface scan which I guess accelerated the deterioation of the drive? also, now a small folder icon appears instead of the grey apple logo, with a question mark and the "apple face" alternatively flashing. Sign of a dead drive?
In tems of my new Mac, I want to make sure I can handle the pix and video of my two 2year old twins. I'm thinking a Mini, maybe and imac or another laptop (iBook), but should I make sure I get an upgraded video card etc.?, or should a standard issue configuration be able to handle simple home movies and burning? I havenot been following development in the wired world that well the last 7 years so I'm not as up on this stuff as I used to be.

Similar Messages

Mac OS X (10.4) Clone To New Hard Drive - Not Booting

Hello folks,
I have recently bought an iMac G3 Snow, w/ 500MHz processor. This things works well with Tiger installed, but has quite a noisy hard drive. I wish to replace the hard drive with a newer, faster, and quieter 30GB hard drive that I happen to have spare.
I had booted the iMac in "Target Disk Mode", fired up my Macbook Pro, and connected the two computers via Firewire. I had then made a successful image of the iMac's HDD using Disk Utility. I then removed and replaced the hard drive in the iMac, and proceeded to restore the image to the new hard drive using Disk Utility again, also via Target Disk Mode.
Upon successfully restoring the image, I rebooted the iMac, only to find that the iMac cannot find the appropriate boot files. (ie, Question-mark w/ Finder folder logo error).
Any help to fix this would be muchly appreciated.
Many thanks,
Andrew

Hi Jeff - many thanks for your help. Unfortunately, I am still unable to boot from a clone made with SuperDuper or Carbon Copy Cloner.
I'm starting to focus my troubleshooting toward the iMac, or hard drive itself. These are my thoughts, if anyone could suggest any other places to poke around for inquiry.
- the Maxtor 30GB replacement hard drive is being recognised successfully in Target Disk Mode by my Macbook Pro. This shows that the hard drive works correctly, and that the iMac can access all of the data on the hard drive. The hard drive is set to "Master".
- when creating clone in either SuperDuper, or Carbon Copy Cloner, the clone processes report that the final clone on the new hard drive will be 'bootable'. This is reiterated when I look for the 'information' on the one partition in Disk Utility.
I have also reset the PRAM and NVRAM and the Open Firmware, to no avail of the hard drive booting into Mac OS X.
I have looked into my Open Firmware settings to see whether there may be a setting to specifically direct the Mac's bootloader toward the "BootX" file on the hard drive. When querying the 'boot-device', the Open Firmware's response is "hd:,\\:tbxi" - is this the correct function to have?
When I purchased the iMac, the Tiger 10.4 PPC DVD/CDs were not included with the purchase. I'm trying my best to fix the problem without the discs if at all possible.
Any suggestions as to where I can go to help my mac boot into Mac OS X again would be muchly appreciated. Thanks.
- Andrew

Hard drive not booting after use of Recovery Manager on USB

The hard drive on my newphew's HP G62t-350 CTO Notebook was failing. I was able to create a recovery USB in the Recovery Manager. I installed a new 120 GB SSD. The original hard drive was larger, can't remember now but 250 or 500 GB. I know the Recovering the System after the Hard Drive is Replaced (Windows 7) says "To avoid problems, install a hard drive as large or larger than the replaced hard drive," but that's a question for later.
Computer booted fine from USB (in fact, is set to boot from USB if present by default). Recovery Manager starts. I choose minimal install. It goes through the process of partitioning the SSD and copying files. Then says to remove external media and reboot, computer will reboot several times during the process, blah, blah, blah. I pull out the USB and reboot, but after POST I get "No bootable media present".
If I try to reboot leaving the USB in, it boots to USB and we're back at the beginning. I am able to confirm with a rescue disk that the SSD has one NTFS partition that has had Windows files copied to it, and a large amount of unallocated space. (Something like 60%/40%.)
So:
How do I make the hard drive bootable, and if it were bootable, would the recovery process complete?
What's going on with the partitions? Is it creating the recovery partition first, and then after boot the recovery partition installs the OS? If so, I might have to abandon this process because since I'm moving to smaller storage, I don't want to devote half of the drive to a recovery partition.
Would official recovery media help? A tech told me that it would, but was not able to explain to my satisfaction why the USB I created with Recovery Manager didn't work, so I am suspicious about the claim that media created by HP as opposed to media created by me using HP's own software would be any better, and since the computer is out of warranty I don't feel like spending $30+ to find out.
This question was solved.
View Solution.

Most persons that have installed an SSD that was smaller than the factory drive have been unable to use any HP Recovery Media with the SSD.
As an alternative, if you can still read the 25-digit Windows product key on the Microsoft COA affixed to the bottom the computer, you can install Windows 7 Home using this key. Please see "How to Install Windows 7 Without the Disc" for instructions on how to download Windows 7, create the installation media, and install Windows 7 using the 25 digit product key from the Microsoft COA on your computer. Please note that this installation will not have any of the HP customizations or HP value-added that was original installed on your computer. Also note that you will need to download and install most of the drivers from the HP G62t-350 CTO Notebook PC Drivers page.
Links to Windows 7 SP1 can be found HERE and HERE.
Direct link to the Windows 7 USB/DVD Download tool. Use this tool to create a bootable DVD or USB Flash Drive from the Windows .ISO
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

New Hard Drive Not Booting Up OSX

Hi,
Ive just purchased and installed a new blank hard drive, using "Carbon Copy Cloner" ive cloned the original hard drive to the blank new hard drive. Once the clone is complete i cannot boot up from my new internal hard drive. When i startup i get a finder icon with a question mark inside, I can boot from my old external hard drive but i want to wipe this and have everything running from my new internal HD as it has a much greater capacity.
Can anyone help with this???

Welcome to the Apple disucssions.
For Cabon Copy Cloner to create a bootable drive, the following conditions have to be met:
1. The target volume cannot be a disk image -- you cannot boot your Macintosh from a disk image.
2. The source and target volumes must be local volumes -- CCC cannot determine the bootability of a remote volume.
3. If the Macintosh is a PowerPC Macintosh, the target device must be an internal volume or on a Firewire hard drive.
4. The files and folders required by Mac OS X must be present on the source volume. These include: /Library, /System, /bin, /etc, /mach_kernel, /private, /sbin, /tmp, /usr, and /var.
5. The files and folders that are required by Mac OS X must be selected to be copied to the target volume (applicable only to the "Incremental backup of selected items" cloning method).
6. If the Macintosh is a PowerPC Macintosh, the hard drive on which the target resides must be partitioned using the Apple Partition Map.
Does your setup meet these requirements?

New hard drive not booting osx from external

Hi guys, I currently installed a new hard drive into my macbook, and I tried holding down the alt//option key to try and boot osx from my external hard drive ((Connected through USB)) but nothing happens. My mouse cursor appears, but nothing shows up. I tried 5 minutes ago to make sure that I was actually able to boot to my external drive from my old hard drive, and it worked perfectly. But nothing shows up on this end. Any help or suggestions?
thanks!

any one have any insight?

Hard drive not in disk utility will not boot up

Went to turn on MacBook pro and got file with question mark. Installed boot disk went to disk utility and hard drive not there to repair. Any help would be appreciated.

Try OWC - they specialize in Mac accessories and have some very good internal hard drives. Sounds as if you need a new one.
Clinton

Can I install windows 7 on a potable Hard Drive using boot camp? or any other way to do so?? need help for college please

I need to use windows in order to use Visual C++ for college but I don't have enough space in my internal Hard Drive so I want to install windows 7using boot camp or any other method on a portable hard drive and boot from it.
Please help I need it as soon as possible for school. Thanks

You can't boot Windows natively except on internal drives.
You can use a VM and put the VM image (VHD) anywhere any drive you want.
You are way too low on disk space, seriously so. And no room - even Windows and Mac OS should be warning and balking already.
"emulator" is an old-school term, even true, running a Guest OS under Mac's as a virtual machine, shared resources (RAM, processor) is easier but not the same performance level as running natively.
Comparison of VMware Fusion Parallels VirtualBox
This just posted, an FAQ for Lion and Boot Camp 4.0
Boot Camp 4.0, OS X Lion: Frequently asked questions

Hard drive not recognized in disk utility

I'm trying to replace the hard drive in my MacBook Pro , the old hard drive was not recognized in disk utilities after the computer crashed .After installing a new hard drive and booting from the original Mac OS install DVD,( leopard?) the new hard drive is not recognized either ? Help

It may be the internal connecting cable that is the problem. If you can install the new HDD in an enclosure, connect it to the MBP, then see if you recognize it using the OSX installation disk. If so, the internal connector should be replaced.
Ciao.

Help with using external hard drive to boot windows on PC

Hi,
I'm not sure if this is in the right place, so apologies in advance if not. I've looked around the internet for a good while now, and I haven't found anyone in my exact position.
My PC's hard drive (running Windows 7) recently died; long story short, I am attempting to reinstall windows. The only other computer I have is this MacBook Pro, on which I have an .iso file of Windows 7. So I want to use my external hard drive (WD 500GB "MyBook") as a boot device so that I can install Windows onto my new internal hard drive.
The problem I am having is that, well, nothing seems to be working. Every time I try to load the .iso onto my external hard drive and boot my PC with it, either a blank screen appears or it says "missing operating system".
I have made sure that the BIOS is running the external hard drive as its boot priority.
I have tried using Disk Utility to partition the external drive, then using 'Restore' to load the .iso onto the partition, to no avail.
I have tried simply dropping the extracted .iso files onto the hard drive, this doesn't work.
I have also tried changing the file system of the external hard drive using the 'Erase' feature (NTFS-3G (using an addon), FAT32, exFAT, all of the others), but I notice that whenever I use Restore after doing this, the file system seems to return to Mac OS Extended, which might be why it isn't booting up on my PC. Is there any way I can succesfully partition the external hard drive in a format that will allow Windows 7 to boot (such as NTFS?), and is Disk Utility even the right program to do this?
If you want any more information from me, please let me know and I'll do my best to provide it - I'm not the most advanced mac user in the world, but I've spent days trying to fix this problem and nothing, no combination of anything, seems to work at all. So any help will be greatly appreciated!
Thanks

Here is a quick suggestion for you:
Download Virtual Box (free PC Emulator for Mac) and install Windows 7 on your Mac (don't worry about activating it yet, as you don't need to keep it more than a few hours). You can tell Virtual Box to use the ISO file as the DVD drive for your virtual Windows computer, so no need to burn a disk.
Search Google for creating a bootable USB installer for Windows 7. I found a link that gave good instructions on how to do this using DiskPart.
Follow the instructions to make the bootable USB stick for installing Windows 7 using your virtual machine you created above.
Use the USB stick to install Windows on your new PC.
Remove the virtual Windows machine from your Mac.
Remove Virtual Box from your Mac.
I found a set of instructions and built an installable USB stick last night that worked great for installing Windows 7 Pro (64 bit) onto my older ThinkPad I had sitting at home. The USB installer also installs in about half the time as a DVD install. The only reason I have you create the virtual Windows PC is that all of the instructions for makeing the Windows install USB stick are written assuming that you already have access to a running Windows PC. By doing this install, you have up to 3 days before you would need to activate it and you can build the installer USB stick and remove teh virtual computer long before that.

I have received an error message from an attached USB hard drive (not Time Capsule) stating "Disk Name" cannot be repaired. Back up your data and reformat. I opened the Disk Utility in an attempt to repair the disk but am advised that the disk "could not

I have received an error message relating to an attached USB hard drive (not a back up and not Time Capsule) advising that "disk name" cannot be repaired. Back up your data and reformat. When I attempted to verify the disk with Disk Utility, I was advised that the disk could not be unmounted. What can I do to repair the disk?
Write Status is Read/Write
SMART Status is Not Supported
Partition Map Scheme is Master Boot Record
HELP!
timothy7712

You need something stronger, such as DiskWarrior, TechTools Pro, or Data Rescue.

Is it possible to install windows 7 on my macbook from a removable hard drive using boot camp? How would I do this?

Is it possible to install windows 7 on my macbook from a removable hard drive using boot camp?
How would I do this?

If you have Lion installed, and run Boot Camp, it will create the boot flash for you, just followe the tutorial on screen. As far as I remember, this was not possible prior to Lion.

Can I install SuSE on an external hard drive and boot to that OS?

Hi,
I'd like to figure out and maybe even keep up with what a friend is doing with linux on a pc.
Can I install SuSE 10.1 on an external Lacie hard drive and boot to that OS by holding down option during start-up?
Thanks,
Garrett

Hi,
I'm an OS X fan who was totally engrossed in the terminal a few years back but became side-tracked into structural and sculptural stuff instead of the computer.
The Mac mini forum mentioned putting OS X on external hard drives to supe up the mini so it made me wonder about other Operating Systems.
Now I'm mostly interested in being a little familiar with the SuSE OS because I heared the Chinese have adopted Linux; my impression is China and Europe are the cultural future and vanguard.
U.S. is the only place on Earth using inches, farenheit, gallons, and pounds, for example. I'm anxious to use software that will come from Europe in the next year or two and China in the next four or five. Most American corps, except Apple, seem to have peaked, to me.
I'm just curious as to what's out there. Anyplace not gone metric yet is SO yesterday. I'll feel way cool when I send my PC friend a screen shot of Linux on my Mac using the external Lacie hard drive instead of an internal partition.
Garrett

Does macbook have to have internal hard drive to boot?!

As i'm having partition problems with the aftermarket hard drive installed in my macbook, I am resigned to re-partitioning it to install SL and restoring from time machine.
However, the old stock hard drive I have is in a caddy, I kept it as a backup incase anything ever goes wrong, then I can just boot straight back into a copy of OSX 10.5, last night I managed to install SL on this drive etc,
So i'm wondering is it possible to boot the macbook from the USB Snow Leopard drive, then at the same time in a seperate caddie, re-partition the other hard drive so I can perform a fresh installation?
Complicated I know, but i've looked into other areas and it appears this is going to be the only way!
Comments, advice and suggestions welcome

I can confirm that the macbook does not need a internal hard drive to boot, I booted using the factory hard drive in a USB caddie, and then installed Snow Leopard via another USB caddie
thanks for the help Matt

G4 Main Hard Drive not showing up on desktop or in folder side list

I am able to access my hard drive, it boots up in to OSX from it just fine. However I am unable to see its icon on my desktop and can see no icon in the folder views. I have run disk utility numerous times and there is no problem ever detected. It is not causing any problems with my computer, it is just a hassle to get access to files on it. An external 500GB drive mounts and shows up on my desktop. Any help?

If you don't like Applescript or Terminal there is an application called [JuhOS X|http://www.saunalahti.fi/~juhruo/juhosx> that lets you toggle visibility on individual items. It does not have the most intuitive interface but your drive should appear on the first page. Check it really is invisible, then click on the drive and toggle visibility. Effects will not take place until you restart your finder, so the easiest thing to do then will be to restart your computer.
Message was edited by: Limnos

Usb hard drive not loading after security update

usb hard drive not loading after security update
I can't seem to find any other posts about this problem.
I have three external hard rives connect by a USB hub to my iMac.
Problem is that if I turn on the hard drive(s) AFTER start up I get a message that the drive either was not recognized by the OS or that it was ejected unexpectedly.
I get the same issue but not all the time if I turn them on before I boot the iMac.
I used the disk drive utility to "repair" the drives but they always come back as "probably ok".
If I restart the iMac with the drives connected (on), it seems to work but not all the time.
A bit annoying as I am wondering if the drives are OK or not.
I don't always need the drives as they are for backing up images from my camera using Apreture.
This all began after i did the latest security update.
is the update to blame?
mahalo.

Yes, you can still use those instructions to reset the PRAM.
You said that you booted to your install disk and that your primary drive did not show up at the Select a Destination screen? That usually means that the computer is either not recognizing your partition, or it's not recognizing the hard drive itself.
Start with this article and follow all the steps even if you already tried them. I suspect that you'll get to step 4 and you'll end up having to call Applecare. If you haven't done those steps, they're most likely going to make you do them anyway, so you might as well get them done before the call.

PB Hard Drive not booting

Similar Messages

Maybe you are looking for