Pb labview 2009 Number and string store data in file

Hi,
I m using labview 2009 in order to save data from instruments of mesure. My program generate Charts of string data that i would like to store in a file of table data. But when i read the file i don't see the digit after the digital point. So i forgot a part of the information which are very important for me.
Futurmore before the instalation of labview 2OO9 the program was ok with labview 8.5;
What can i do to solve this problem?
Have any modification with labview 2009?
Thanks in advance for your answer.
Attachments:
Image12.png ‏24 KB

HI,
In attachment file you will find the data before the saving operation in data file.
We see in the file after the result. We have forgot all data after the decimal point, so we forgot a part of infortion that are very important in my application.
Thanks in advance for your help
Marc
Attachments:
AFTER.txt ‏1 KB
before.txt ‏1 KB

Similar Messages

How to Plot number and string in one row (data logger counter) ?

hi all i made data log quantity using Digital Counter via modbus to monitoring quantity and reject that has and Name Operator, Machine and Part Number.
i have problem about plot the number & string in one row, as shown on the picture below :
how to move that string on one row ? i attach my vi.
Thanks~
Attachments:
MODBUS LIB Counter.vi ‏39 KB

Duplicate and answered - http://forums.ni.com/t5/LabVIEW/How-to-Plot-number-and-string-in-one-row-data-logger-counter-via/m-p...

Table For Purchase Order Version Number and Version Created Date

Dear Sir,
Whenever we make any change in Purchase Order , then a new Version Number along with Created Date is assigned . In Me23n the Version Number and It's Created date is also displayed ( at PO Header Level) .
We request you to kindly guide us as which Table is required to be reffered to get the Version Number and Version Created date for the Purchase Order .
With Thanks and Rgds
Sonia

Hi
Check in EKKO - Purchase order header
EKPO - Purchase order item
CDHDR
CHPOS
Regards
Ram
Edited by: Parasuram M on Sep 16, 2009 11:59 AM

Favor to ask : can you open this labview 2009 Vi and save it for me in a Labview 8.6 readable vi ?

Hi guys,
I have a favor to ask : May somebody would be nice enough to open this Labview 2009 VI and save it in a Labview 8.6 readable VI ? You'll probably have some missing blocks cause I use specials ones but I don't want to have to re-make all the VI.
Thanks you very much
G.
Solved!
Go to Solution.
Attachments:
Control3.vi ‏29 KB

notimperial wrote:
Probably not the right place to do this, but could someone onpen this in labview 2010 and save it in a format compatible with labview 2009?
Thank you in advance
You are right we have a thread for this here.
http://forums.ni.com/t5/LabVIEW/Downconvert-VI-Requests/m-p/1067229
Here is your vi please use the downconvert thread next time.
Tim
Johnson Controls
Holland Michigan
Attachments:
WFMreaderIII.vi ‏53 KB

HT1918 I am trying to change my card and after putting in the card number and the expiry dates it will not let me type in the security code please help

I am trying to change me paymenet method by changing my card, after typing in the card number and expiry dates it will not let me type in the box for the security number I am trying to do this on the computer
Jill

finally ...
1. Logout from all apple devices
2. open "App Store" application on your macbook. Login and change all the details for card.
3. Login in itunes, iphone ... I will see that all the details are already updated automatically.
I've just bought some app from itunes

Concatenate number and string

Hi Expert,
i
o
06/05/2013 09:56:00 AM
07/05/2013 09:48:00 AM
08/05/2013 10:26:00 AM
08/05/2013 05:33:00 PM
10/05/2013 10:10:00 AM
11/05/2013 05:31:00 AM
14/05/2013 09:40:00 AM
14/05/2013 05:39:00 PM
17/05/2013 09:41:00 AM
17/05/2013 07:36:00 PM
28/05/2013 09:39:00 AM
29/05/2013 09:39:00 AM
I want to do concatenate string with number , example I have 6 i want to add 0 before 6 result 06.
see query
select
      case
      when (floor(((o-i)*24*60*60)/3600)) > 9 then
      floor(((o-i)*24*60*60)/3600)
      else
      0 || to_char(floor(((o-i)*24*60*60)/3600))
      End
      Wh
from T
showing error ORA-00932 inconsistent datatypes:
please guide.

CASE requires all THEN clauses to have same datatype class. And in your case first THEN returns a number while second a string. Wrap it into char and:
with t as (
           select to_date('06/05/2013 09:56:00 AM','dd/mm/yyyy hh:mi:ss am') i,
                   to_date('07/05/2013 09:48:00 AM','dd/mm/yyyy hh:mi:ss am') o
             from dual
select
      case
      when (floor(((o-i)*24*60*60)/3600)) > 9 then
      to_char(floor(((o-i)*24*60*60)/3600))
      else
      to_char(floor(((o-i)*24*60*60)/3600))
      End
      Wh
from T
WH
23
SQL>
But it is very inefficient way. It is not exactly clear what you are doing, but it looks like you want to get number of hours between dates. If so:
SQL> with t as (
2             select to_date('06/05/2013 09:56:00 AM','dd/mm/yyyy hh:mi:ss am') i,
3                     to_date('07/05/2013 09:48:00 AM','dd/mm/yyyy hh:mi:ss am') o
4               from dual
5            )
6 select to_char(trunc((o -i) * 24),'FM09') wh
7    from t
8 /
WH
23
SQL> with t as (
2             select to_date('06/05/2013 11:56:00 PM','dd/mm/yyyy hh:mi:ss am') i,
3                     to_date('07/05/2013 09:48:00 AM','dd/mm/yyyy hh:mi:ss am') o
4               from dual
5            )
6 select to_char(trunc((o -i) * 24),'FM09') wh
7    from t
8 /
WH
09
SQL>
SY.

Have you been successful porting your number and keeping unlimited data?

Hi , I am trying to save money by getting rid of my texting plan($20) and having Google Voice as my SMS provider. I want to keep my number so I will port my number to GV. For a 1-time fee of $20. The Problem is that during the process some people lose their UNLIMITED DATA package. I, of course don't want this to happen. I have searched the interwebs and found that this forum had the good information on it.
https://community.verizonwireless.com/thread/779321?start=0&tstart=0
https://community.verizonwireless.com/thread/779321?start=80&tstart=0
See post # 3 and # 85 for detailed instructions. I was in the process of doing it but Google Wallet denied my transaction because I needed to verify my account. This process takes 3 days. So I will wait and try again. I would like to know if the rest of the verizon community has been succesful or has regretted doing this.
I feel that this process should work and would like to keep this discussion open so other people can do the same. We all know sms and voice mins are cheap and carriers are just milking money from data plans.
PS. I felt # 85 was really straight forward
Joined the community to thank the OP - and to add in another success story. Before I start my 'experience share', I think its pertinent to mention that I have the Galaxy S4 [Android]
Started the GV Port on Monday at about 3PM. Provided GV with personal details, phone number, billing PIN (you can set one up or change your current PIN on the VZW website after logging on to your account) and my account number (excluded the -00001 after my account number as suggested by other posters on this thread). Google charged me $20 to complete the port.
On Tuesday morning, approximately at about 11AM, I logged into my VZW account and requested a new number (VZW's website states that this process is free if done online). At this time, my GV Port status showed "Number Change Pending". Once the new number was assigned to me by VZW (the number is issued instantly), I had to turn my phone off and wait a few minutes before turning it back on. When I turned my phone back on, it showed that the new number was active (no VZW notifications - just tried a test call from my landline).
Almost 24 Hours down to the minute (so at about 3PM on Tuesday), I got an email from GV stating that my port was complete. On the GV website, I then added in my new number (under Settings>Phones), and set all calls (and texts) to forward to my new number. GV walked me through a couple of programming steps - and confirmed that my GV calls would be forwarded to my new VZW number. Please note that if you want GV to pick up your VM's, then you will need to activate Google voicemail on the GV website (Settings>Phones). Else, VZW voicemail will end up picking up your calls - and a message like "this user has a VM box that has not been set up" will play.
I also opened up the GV app on my phone and changed the settings to "Make all calls through Google Voice". Also, I turned off the 'Messaging' app, and set the GV app as the default app for handling all texts.
As of now, I can make and receive calls via the setup described above. Folks receiving calls from me see my GV number on their displays (so no need to update folks with my new number), and when I receive calls on my GV number, my VZW phone displays the number of the person trying to reach me (so no updating my contacts list). Low priced international calls, desktop-based texting, unlimited storage of texts/VM's/call-logs, here I come!
My texts arent working yet, but GV states that it takes about 3 days before texting becomes active. When it does, I'm hoping that all texts will be routed via the GV app (I'm fairly certain that it will)
Other things to note:
Banking Apps: Some banking apps that require verification codes to be sent via text might stop working. I just got an email from BOFA this morning asking me to reverify my mobile number. Need to fix this once GV texting becomes active
Messaging: Existing texts on your device cannot be backed up/imported into GV. That said, Google Play has a couple of free apps that backup your entire message archive under a separate label within your Gmail account
Hope this helps someone else out there in taking the plunge. Seems like the process is fairly straightforward unless you decide to skip some steps or if you are impatient and try to change things too quickly (I would really urge you against skipping steps, hurrying things up, etc. GV is completely automated, and getting "support" is almost impossible).
All the best!"

You won't lose your unlimited data as long as your account stays active and you don't purchase a subsidized phone. I just did this yesterday and it took just a few minutes over 24 hours to port my number over to GV. I still have unlimited data. I pretty much followed the instructions you have above except I waited about 7 hours to get a new number from VZW just to make sure there were no hiccups. VZW says you may get some overages if you change your number immediately as opposed to on the first day of your billing cycle because they prorate your minutes and texts used. Luckily I have unlimited everything so it didn't make a difference for me. I'm planning on going over to T-Mobile. My home is a dead zone for cell phones and I always have a weak signal and sometimes don't get my calls. I figure if I'm going to pay for an unsubsidized phone, I might as well go with a company that has wifi calling and a cheaper unlimited plan. I pay $94/mo before taxes with VZW; I'll only be paying $59.50 with T-Mobile for the same plan with 2.5 GB tethering included. T-Mobile here in LA is pretty good and even if I don't get LTE, I can fall back on their HSPA+ network, which is way better than VZW's crippled 3G network. No regrets porting over. The ONLY way I'll stay with VZW is if they allow me to keep my unlimited data (not going to do Verizon Max) and get a subsidized phone. CAN YOU HEAR ME NOW VERIZON?

According to PO number and Line item data should come once but its repeatin

I am calculating IR Quantity and IR value......
for a PO if there are four same line items i wanted them once but they are displaying for each and every line item
If my po is 2003000151 and line item 0010 if both are same then i wanted ir quantity 500
but its displaying like this
PO                 item   IR
2003000151   0010 500
2003000151   0010 500
2003000151   0010 500
2003000151   0010 500
I need like this
2003000151   0010 500
2003000151   0010
2003000151   0010
2003000151   0010
If po number and line item are same IR quantity should be displayed only once..
What should be done if it should not repeat in each and every line item if both PO and line item are same

i am having internal table of it_ekko.
in that i am having some data of PO no, Line Item,IR value and IR qty......
i am having data like below.
PO                        Line Item   IR Value    IR QTY
200310051          0010         1500           4500
200310051          0010        1500           4500
200310052         0010           0                   0
200310052          0010       0               0
now where ever IR value and IR qty is present i wanted that to display only once against that PO and line item
i wanted like below
PO                        Line Item   IR Value    IR QTY
200310051          0010         1500           4500
200310051          0010            0              0
200310052         0010             0                0
200310052          0010            0               0
Field names for IR value and IR Qty are Menge2 and dmbtr2.
How to do that.........
I cant use
Delete adjacent duplicates of it_ekko by ebeln = wa_ekko-ebeln and
                                                                      ebelp = wa_ekko-ebelp.
because i wanted that po and same line items , how many times it is like that only.....
in it_ekko table i only wanted to delete duplicates of menge2 and dmbtr2.
Pls suggest the code

LabVIEW 2009 x64 and application builder

Hi
My organisation has just got a site licence for LabVIEW so I have just installed 2009 x64.
My question is this:
If I build applications written using LabVIEW 2009 x64, will they only run on 64 bit computers? I would test this but both my computers are 64 bit machines. I have had a brief look through the build specs but there doesn't seem to be anything about 32/64 bit compatibility.
thanks.
J
Solved!
Go to Solution.

Does this help?
http://digital.ni.com/public.nsf/allkb/71E9408E6DEAD76C8625760B006B6F98
Q. Can I run an executable built with LabVIEW 64-bit on a 32-bit PC?
A. You cannot run the LabVIEW 64-bit Development System, Run-Time Engine, or executables on a 32-bit PC.
Q. Can I run an executable built with LabVIEW 32-bit on a 64-bit PC?
A. Windows can run 32-bit executables on a 64-bit PC. Therefore, the LabVIEW 32-bit Development System, Run-Time Engine, and executables can be run on Windows 64-bit.
Q. Can I have both LabVIEW 32-bit and LabVIEW 64-bit installed on the same 64-bit machine?
A. Yes.
Q. Can I build a 32-bit version of an executable from the LabVIEW 64-bit application builder?
A. There currently is not an option to create a 32-bit version of an executable from the LabVIEW 64-bit application builder.

Is it possible through labview to set and read window¿s based file properties?

Any file in XP operating system has file properties associated with it, such as, size, location, when the file was created, modified and last accessed. I know that Labview has the ability to access the size and modified property. Other file types such as image format types jpg, bmp and tif have additional associated properties such as: title, subject, author, and comments. Is it possible through labview to read and set these properties programmatically?

Hpopenoe wrote:
> Any file in XP operating system has file properties associated with
> it, such as, size, location, when the file was created, modified and
> last accessed. I know that Labview has the ability to access the size
> and modified property. Other file types such as image format types
> jpg, bmp and tif have additional associated properties such as: title,
> subject, author, and comments. Is it possible through labview to read
> and set these properties programmatically?
Well, you can most probably do that by calling Windows API functions.
Note however that the properties you mention are not generic Windows
file properties but file specific internal attributes. Explorer does at
least in XP handle some of those properties and shows them to the user
but does so with internal file type handlers to extract the properties
from the file.
I'm not sure those file type handlers are actually available for other
applications than Explorer without quite some work. If they are
available they are certainly not part of the standard Win32 API but most
probably part of the Windows shell component and I would guess not just
through normal API function calls, but through the shell namespace
enumeration, which is built on COM interfaces, something you only can
call from standard programming languages, most of them are done in C++
(and if you are a little more persistant in standard C).
So you are likely to need to either write your own DLL doing the nitty
gritty work of calling the shell interface and using that DLL in LabVIEW
or find an Active X component which does the work for you. No doubt
there is such an Active X component somewhere but how good and expensive
is always a big question.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to Plot number and string in one row (data logger counter via MODBUS) ?

hi all i made data log quantity using Digital Counter via modbus (RS-485) to monitoring quantity and reject that has and Name Operator, Machine and Part Number.
i have problem about plot the number & string in one row, as shown on the picture below :
how to move that string on one row ? i attach my vi.
Thanks~
Solved!
Go to Solution.
Attachments:
MODBUS LIB Counter.vi ‏39 KB

Hi rhiesnand,
right now you add 2 new rows to your array.
The solution is to concatenate both row parts to one bigger 1D array before adding that array as new row to your 2D array!
Like this:
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to send sms to one "mobile number" and retrieve store to mysql

Hi All,
I am using Clickatell api to send sms.Its perfectly working.My current requirement is *"I need one mobile number(sms provider/gateway) that should be receive any sms from various mobile numbers.If i give that number to my clients they will send a message to that number.If i get any sms on that number i will retrieve the sms and store it to my database".*
please any one help me and give some ideas or the sms providers api
by
vijay

This doesn't seem to have anything to do with JavaMail.
Maybe you should ask the Clickatell API owners?

Insert without commit (implicit and explicit) stores data.

Hi all:
I have this piece of code:
REPORT ztest.
DATA: wa_zsic_abonos_chk TYPE zsic_abonos_chk. "Is a transparent table
START-OF-SELECTION.
   wa_zsic_abonos_chk-bukrs = 'MU01'.
   wa_zsic_abonos_chk-belnr = '99999'.
   wa_zsic_abonos_chk-gjahr = '2008'.
INSERT into zsic_abonos_chk values wa_zsic_abonos_chk.
IF sy-subrc <> 0.
    WRITE:/ 'register NOT inserted'.
ELSE
    WRITE:/ 'register inserted'.
ENDIF.
SELECT SINGLE *
    INTO   wa_zsic_abonos_chk
FROM zsic_abonos_chk
WHERE bukrs = 'MU01'
    AND belnr = '99999'
    AND gjahr = '2008'.
IF sy-subrc = 0.
    WRITE:/ 'register found!.'.
ELSE.
    WRITE:/ 'register NOT found.'.
ENDIF.
When I run this code I get this results:
register inserted
register found!
This is surprising to me, because I did not write the COMMIT WORK after the Insert.
What I expected to have was:
register inserted
register NOT found
zsic_abonos_chk is a transparent table without buffering, and the register does not exists before the Insert.
The Database system is running below SAP is DB2.
Can someone explain this behavior?
Thanks in advance
Jordi

Today I spent some time to close this thread.
I made this test:
REPORT ZTEST.
DATA: wa_zsic_abonos_chk TYPE zsic_abonos_chk. "Is a transparent table
START-OF-SELECTION.
   wa_zsic_abonos_chk-bukrs = 'MU01'.
   wa_zsic_abonos_chk-belnr = '999949'.
   wa_zsic_abonos_chk-gjahr = '2008'.
INSERT into zsic_abonos_chk values wa_zsic_abonos_chk.
IF sy-subrc <> 0.
    WRITE:/ 'register NOT inserted'.
ELSE.
    WRITE:/ 'register inserted'.
ENDIF.
SELECT SINGLE *
    INTO   wa_zsic_abonos_chk
FROM zsic_abonos_chk
WHERE bukrs = wa_zsic_abonos_chk-bukrs
    AND belnr = wa_zsic_abonos_chk-belnr
    AND gjahr = wa_zsic_abonos_chk-gjahr.
IF sy-subrc = 0.
    WRITE:/ 'register found!.'.
ELSE.
    WRITE:/ 'register NOT found.'.
ENDIF.
ROLLBACK WORK.
SELECT SINGLE *
    INTO   wa_zsic_abonos_chk
FROM zsic_abonos_chk
WHERE bukrs = wa_zsic_abonos_chk-bukrs
    AND belnr = wa_zsic_abonos_chk-belnr
    AND gjahr = wa_zsic_abonos_chk-gjahr.
IF sy-subrc = 0.
    WRITE:/ 'register found!.'.
ELSE.
    WRITE:/ 'register NOT found.'.
ENDIF.
The result is:
register inserted
register found!.
register NOT found.
This clarifies the matter.

Labview 2009 x32 and x64 installation error on windows 7 x64

When attempting to install the evaluation version of labview installed by clicking the try labview for free link on ni.com, I am experiencing an installation error.
the full error is shown in the attachment below, and is as follows;
The NI VC2005MSMs x64 installation has failed with the following error.
Error 1935. An error occured during the installation of assembly 'policy.8.0.Microsoft.VC80.OpenMP, type="win32_policy",version="8.0.50727.762".publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64"'. Please refer to Help and Support for more information.
processor is an INTEL core 2 duo
running windows 7 x64
The above error occurs with both 32 and 64 bit versions. I belive I have installed this version of labview on this computer before.
Thanks
David
Solved!
Go to Solution.
Attachments:
labview_error.jpg ‏48 KB

Why Does My LabVIEW Installation Fail With Error 1935?
Also see this discussion

Using RSLinx OPC with Labview 2009 SP1 and Getting Wierd Problem

I have a small test system with 4 analog inputs and 4 analog outputs. Oddly, I can use the Labview Distributed Systems Manager and read the input (level) changes and stroke the analog outputs (valves). However, when I go into a VI, I can get the level readings (only the first time I enter, after that not), but can never stroke the valves. Looking at the shared variable setup in both the project I am using and the Distributed Systems Manager, I have them both set up the same as a PSP with the same OPC reference, although formerly the project used project-attached shared variables.

Using the timed structure set at the same acquisition rate as the OPC interface corrected the problem.

Pb labview 2009 Number and string store data in file

Similar Messages

Maybe you are looking for