Pb of Mapping and Context

Hy everybody
I'm lost in one of my mapping.
Inbound :
<a>

... n times

</a>
I want it in outbound :
<a>
<c>

</c>
... n times
<c>

</c>
</a>
I don't manage to reach it.
Thanks in advance

Hi,
Are you able to get atleast one element under
<C>

</C>
If so ,make use of Remove context and SplitByValue functions here to achieve this.
Check this -
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
Also you can see the runtime values thru Display Queue in the message Mapping(Repository)
Hope this helps,
Regards,
Moorthy

Similar Messages

Mapping and context problem

Hi i am not being able to perform this mapping, the scenario is like this:
i need to create one LINE in the output for each E1PLOGI in the input when FLAG3 = 'S'
also as i don't understand completely the context theory i cant figure out in witch context to set the fields
My context is set like this
FLAG3 -> context = E1PLOGI
My logic is createif( FLAG3 = 'S' ) -> LINE
My xml test file have:
one E1PLOGI node without E1P0000
one E1PLOGI with E1P0000 node where FLAG3 = 'N'
one E1PLOGI completely OK
The result is that not even one LINE its created.
If only put one line ok it works ok, but if one line doesnt have an E1P0000 node or if FLAG3='S' then the next OK input lines it wont come out.
plase heeelp!
IN STRUCTURE
<Z_HRMD_A>
 <IDOC BEGIN="1">
 <EDI_DC40 SEGMENT="1">
 <CREDAT>20080731</CREDAT>
 </EDI_DC40>
 <E1PLOGI SEGMENT="1">
 <E1PITYP SEGMENT="1">
 <E1P0000 SEGMENT="1">
 <FLAG3>S</FLAG3>
 </E1P0000>
 </E1PITYP>
 </E1PLOGI>
 </IDOC>
</Z_HRMD_A>
Z_HRMD_A 1..1
IDOC 1..1
EDI_DC40 1..1
CREDAT 0..1
E1PLOGI 1..UNBOUNDED
E1PITYP 0..UNBOUNDED
E1P0000 0..UNBOUNDED
FLAG3 0..1
OUT STRUCTURE
<FILE_X>
 <LINE>
 <FIELD_1>
 <FIELD_2>
 <FIELD_3>
 <FIELD_4>
 </LINE>
</FILE_X>
FILE_X 1..1
LINE 0..UNBOUNDED
FIELD_X 0..1
Edited by: Mariano Billinghurst on Aug 4, 2008 6:05 PM
Edited by: Mariano Billinghurst on Aug 4, 2008 6:12 PM

Here it is the mapping and the display of the queues in each step.
Mi test xml has
1-one E1EPILOGI without EP0000
2-one E1EPILOGI OK
3-one E1EPILOGI with FLAG3 = N
4-one E1EPILOGI OK
http://img297.imageshack.us/img297/3615/mappingandqueueswi0.jpg
beena with your solution it was creating two lines , one with 1 and one with 3.
Kumar i think with your solution i am much closer, but still doesnt work ok. Could you explain me why at the end of the queres everything says "supress"?
Regards.
Mariano.

Problem with context mapping and data flow in a FPM application

Hi All,
I am trying to develop an ESS application using FPM. For the same, the requirement is to see the history of an employee in the second view.
The first view has got just the overview information and the second one has got the detail. So, the records or the fields are the same on both the views.
As per the FPM guidelines, the Model is residing in the Fc component and the respective Vc components are using the model data accordingly.
I am executing the model in the Fc component calling the executable method in the interfaceController of the first view and then trying to display the output data of the BAPI in the first view which provides the overview information.This is working fine.
But when i am trying to map the same output node to the Table UI for the second view, the record size is coming zero and thus no information is available.
For the above issue, I am again executing the RFC in the InterfaceController of the second view to populate the records, which is incorrect as it is already executed and the data is available for the first view.
I request you to let me know the correct approach to Context mapping and data flow when using FPM-roadmap. Is their any standard method or approach available to deal with such requirements? Please let me know.
Thanks in advance.
Regards
DK

Hi Idhaya,
I model node is available in Fc and the Fc interface controller is being used in the first Vc and the second Vc.
So the idea is, as the executable method is generated in the Fc, so i have created a custom method to call the executable method in Fc, where the input parameter is getting passed and this custom method is finally getting called is the first Vc.
So , now my first Vc is ready to call the custom method in Fc and execute the RFC. Once the RFC is executed, the nodes in the Fc should get populated which is the ideal case.
And as the Fc is used as a component in the second Vc, the same node is available to the UI elements.
But, when I check the record size for the output node, it is always zero, for the second Vc.
Regards
DK

Context Mapping and data binding

Hi,
Please explain about the context mapping and data dinding
and also differences
Thank's & Regard's.
Sri

Hi Sridevi Sudunaguntla ,
context mapping-> means mapping between different contexts
ie suppose if we are creating a node in the component controllet and if we want to use that node in view a and view b, then we have to map this node from component controller to the required view.. this mapping of context nodes is called context mapping..for context mapping, create nodes in compcontroller.. tehn go to view-> context-> tehn drag and drop required node from component controller to the view ..
data binding-> means binding the data from nopde to the ui elements or viceversa... after the nodes are created in indudual views or after context mapping.. we have to bind these nodes to the ui elements... suppose we have an input field and we want to read that,, so we have to bind the input field to an attribute in the node.. this binding is called.. data binding.
Regards
Sarath

Mapping and transformation rules

Hi experts,
pls tell me what is this mapping and transformation rules in context wz filw to RFC scenario.
what do u mean by transformation and transformation rules.
Thanks
veeru

Hi
Mapping and Transformation both are same,to understand clearly we go for transformation.
Generally we go for Mapping/Transformation when ever you want to change the source structure into required format of the target structure we gor for mapping ie. Transforming the one structure to another.
Ex:
Source Structure:
Fname
Lname
Empid
Fname------>CONCATE theswe togetherly gives Name.
Lname------->CONCATE
My required Target Structure is:
Name(So to get Name we will use the CONCATE preefined functon under Graphical Mapping in Mapping Editor )
Empid
Thanks

SAP XI - Mapping with Contexts

Hi Guys,
We have a problem when mapping with contexts. Couldyou please help.
What we are trying to achieve is if PARVW = X then map name2 to name2. We have done this all the way down the DT_Address. The context on both input values are set to IDOC.
The problem is that when all the fields are in a particular segment occurence then it maps perfectly. But on numerous occurrences of E1EDKA1 various fields are missing i.e.name2 or pstl2 etc. What we want to happen is if the field doesnt exist in that particular occurrence then just leave blank and dont map. What is happening instead is XI keeps looking for this field and maps the first occurrence it can find of it. So we end up with like 6 occurrences of the same thing.
Is their a way to specify that only map the fields if it is within the same occurrence as the qualifier. So basically Name2 follows PARVW to the same occurrence.
Also is their a way of making it so we dont get
Name
Name
Name
Id
Id
Id
Address
Address
Address
And instead get
Name
Id
Address
Name
Id
Address
Name
Id
Address
Thanks people

Hi Thanks for your input.
It was a little to do with the context but in the end I had to put another element in the target structure. So it went
Customer 0-unbounded
        customerAddress 1-1
                   Details 0-1
                   ETC 0-1
                   ETC 0-1
I mapped the customer to E1EDKA1
I mapped customer address to a constant
and the details I ampped as before but with no context.
This seemed to work.... I have no idea why but it did work. If anybody could explain the why, I would appreciate it.

Diff b/w msg mapping and interface mapping

hi
i have some doubt's:
1. diff b/w msg mapping and interface mapping
2. What is product in SLD? usually who creates the product,technical,business system??
thx in advance..

hI Smartsoft General User ,
The following r excellent websites on mapping which differentiate msg mapping and interface mapping in detail:
Excellent PDF Document on Mapping
http://help.sap.com/bp_bpmv130/Documentation/Operation/MappingXI30.pdf
Mapping Development with the ABAP Workbench
http://help.sap.com/saphelp_nw04/helpdata/en/10/5abb2d9df242f6a62e22e027a6c382/content.htm
ABAP Mappings
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm
how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
How to Use ABAP Mapping in XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
These r excellent websites in SLD:
How ToHandle the SLD for SAP XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
How ToHandle Caches in SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
http://www.sap-press.de/download/dateien/751/sap_press_exchange_infra_engl.pdf
cheers!
gyanaraj
****Pls reward points if u find this helpful

What is the diffrence between map and map.entry in core java

what is the diffrence between map and map.entry in core java . where it will be use ful. any one give one example plz.

A Map contains Map.Entry's
e.g.
        Map map = new LinkedHashMap(8);
        map.put(new Integer(1), "one");
        map.put(new Integer(2), "two");
        final Iterator iterator = map.entrySet().iterator();
        while (iterator.hasNext()) {
            Map.Entry entry = (Map.Entry) iterator.next();
            System.out.println("key=" + entry.getKey() + ", value=" + entry.getValue());
        }

Ovi maps and Nokia Maps

I have recently downloaded the ovi maps update for free navigation on my 5800 however now I seem to have 2 programs in my installed apps menu, Ovi maps and Nokia maps. This is causing me some problems as my phones built in memory is now completely full and I am unable to do some things as I have ran out of on phone memory space. Which one is the main map software? And also can I uninstall one? If not then can it be installed on a MSD card and if yes how?

As far as I can determine Ovi maps is the mapping software (program) which installs to C (phone memory) and Nokia maps is the map data that you have loaded which I believe are installed to E (mass memory).
I can confirm that you do need both installed.
The problem as far as I can see is that the previous maps versions 3.01 is built into the current firmware (v20 for N97 - not sure for 5800) and installing maps 3.03 does not remove or overwrite the earlier version so you end up with both versions installed and thus the extra memory footprint.
This will remain a problem until a newer firmware is released which will hopefully have maps 3.03 (or later depending when next firmware is released) thus reducing the extra 9 megs or so used.
Hope this answers your question
Message Edited by rider5512 on 29-Jan-2010 05:16 AM
Rider5512

What is the best product for network mapping and monitoring? I am an inexperienced user). Mac 10.9.2 laptop

I have lots of questions, but the gist is that I want to know the best product, preferably from the app store, that I can use for network mapping mapping and monitoring.
I want to get their mac address or other police trackable etc info so I can use my computer safely.
I am also being cyberbullied.
I try just using ethernet but still get intruded on, for instance, messages that "other devices are using my ip address". The only other device I own is an iPod that I keep sahut off plus wifi turned off then.
(NOTE: You can skip the rest of this message if you want. It regards hacking attempts etc, a little out of the scope of discussion, perhaps).
Also a home intrusion where computer was thoroughly hacked with router(s) set up "very very close to me," according to Apple.
Also, hackers get into my Facebook and gmail and yahoo mail, really, no matter what I try to do on my computer and how many times I change passwords it does no good.
Also, The ip addresses for google and the one in syste preferences and the one looking up my ip address on ip chicken always gets three different results.
More worrisome it that hackers got into my Wells Fargo account a week after the intrusion even though I changed all account #'s and pw plus notified bank. They also broke into paypal using my new account numbers.
Also, stuff like Facetime pops up on my computer without my clicking on it even though I'm using ethernet to connect. I've given up on Time Capsule because I'm told that's how the hackers hacked my computer so thoroughly duriung the intrusion.
Thanks.

Aubry,
why don't you send your sequences straight to Compressor first, encode your movies as MPEG 2 and AC3 audio and import all assets in DVD studio PRO?
G.

Google maps and google help not loading anymore! help!

Google maps and google help aren't loading since I've updated firefox. Works in Chrome no problem. Tried everything listed here: https://support.mozilla.com/en-US/kb/Error%20loading%20web%20sites, re-installed flash, cleared cache, etc... what am I missing?

Anyone have any ideas?

How to remove stocks, weather,clock, notes, reminders, youtube, game center calc, voice memos,calendar, maps, and stocks? As a person who blew 300 bucks I think I should have a choice if I want to remove this crap but can't figure out how.

How to remove stocks, weather,clock, notes, reminders, youtube, game center calc, voice memos,calendar, maps, and stocks? As a person who blew 300 bucks I think I should have a choice if I want to remove this crap but can't figure out how.
any help would make me happy. As it stands now from looking on the web it can't be deleted but making sure before i return this ipod touch. I wan't a clean item the way I wan't it and not how they want it. Like I do not need Itunes and App Store on this ipod because I use my computer only to shop, So many things i like out of the ipod and I am sure lots more people also would like a cleaner ipod/phone or what ever.
from looking at what I never use I see a total of 14 app's I not want taking up space and my screen.
yup with the 5.0 came another stupid icon i not like. ( Newsstand )

yes i moved them into a folder, but I not want them at all on my screen. Guess I return this and pick up a
Zune HD
less app's on that then ipod touch. thank you for the responce.

Sort table columns in a table and context created dinamically

Hello all,
I have implemented the table sorting several times in another developments, but now I'm facing a problem.
I have created the table and context node that I need to sort dinamically (before somebody ask me why, I would say that it's the only way to do that for my current project, there was no possibility of doing that in dessign time). I have implemented the table sorting more or less the same way I would do with a table created in dessing time, but when I run my WD the sorting of columns doesn't work.
In the wdDoModifyView, I have put the following code:
if(firstTime){
IWDAction ordenacion     = wdThis.wdCreateAction(IPrivateResultDispGlobalView.WDActionEventHandler.ORDENACION, null);
IWDParameters param = ordenacion.getActionParameters();
param.addParameter("nombreNodo",nombreNodo);
and in the code of the action
    //@@begin onActionOrdenacion(ServerEvent)
     System.err.println("**** NOMBRE NODO **** "+nombreNodo);
     wdContext.currentContextElement().getTableSorter().sort(wdEvent, wdContext.getChildNode(nombreNodo, IWDNode.LEAD_SELECTION));
    //@@end
The name of the node ("nombreNodo) it's only correct the first time I click on a column.
Has anybody implemented the table sorting in a dinamically created table and context node? And how do you do to make it works.
Thank you very much

Here is the code
//Preparamos Navegaciones
IWDAction abrirProyecto = wdThis.wdCreateAction(IPrivateResultDispGlobalView.WDActionEventHandler.ABRIR_PROYECTO, null);
IWDAction abrirDisp     = wdThis.wdCreateAction(IPrivateResultDispGlobalView.WDActionEventHandler.ABRIR_DISPONIBLE, null);
//IWDAction ordenacion     = wdThis.wdCreateAction(IPrivateResultDispGlobalView.WDActionEventHandler.ORDENACION, null);
IWDAction ordenacion=wdThis.wdGetOrdenacionAction();
IWDParameters param = ordenacion.getActionParameters();
param.addParameter("nombreNodo",nombreNodo);
IWDTable table = wdThis.wdGetInformesController().crearTabla(view, nombreNodo, movimientosInfo,new String[]{"Codi Projecte",null,"Nom Projecte", "Import Projecte", "Client", "Increment Disponible futur per facturació no emesa i / o anualitats pendents","Increment Disponible futur per ingressos pendents de cobrar", "Disponible"},new String[]{"10px", null,"10px", "10px","10px","10px","10px","10px"},new IWDAction[]{abrirProyecto,null, null, null, null,null,null,abrirDisp}, -1);
//ordenar tabla
wdContext.currentContextElement().setTableSorter(new TableSorter(table, ordenacion,null));
containerTablasProyecto.addChild(table);
Edited by: Mireia Romo on May 28, 2009 12:27 PM

I am looking for a map app that will allow me to place pins where my clients offices are on a map and keep them save every time I open the app. Does anyone out there know of an app that will do this?

I am looking for a map app that will allow me to place pins where my clients offices are on a map and keep them save every time I open the app. Does anyone out there know of an app that will do this?

"Motion 5" is your friend.
Michael Wohl has a nice 15 video series (free) about Motion 5 at http://www.macprovideo.com/tutorial/motion5101-overview-and-workflow-guide (right side)
This is a "teaser" series to sell his tutorials but it is really good. Just saw it yesterday for the first time.
While all you want is just to place pins, realize that Motion has so much more. All kinds of effects and they can be really customized. Maybe put their street address, contact name, and phone number by the pin?
Motion 5: cheap at $49.99 (just got my download two days ago)
Motion 5: Support Community athttps://discussions.apple.com/community/professional_applications/motion_5
If you're using the map for, say, deliveries, and use an iPad, what you could do is have a general map of the area imported into Motion, create the pins and whatever, then save (share?) it to the iPad.
Disclaimer: I have virtually no relationship with anything connected with this tutorial product, developer, or anything.

Nokia Map and Drive+ Beta on Lumina 920 Feedback

So I took my new phone down to MD/DC area in the last few days and here are a few things that I would like to post as my feedback on what would be nice to have, fixes, etc. [I used both my new Lumia 920 and my wife's Samsung Galaxy Note 2 as comparsion).
1. Highest priority for me is that the routes from Here.net need to be able to sync down to the phone. Nothing more is more important then this because when you have a custom route that you want to use (for example, to route around high traffic or potential high traffic areas).
2. Extremely disappointed that a new road in MD (MD 200) was not used by the Drive+ and didn't even show up on the map on my Lumia 920 while it was used and did show up on Google map. This road is a toll road and is over a year old already. [And yes, I have enabled toll road in the navigation as well as selected 'faster route' as the routing to use under smart routing]. I cannot stressed how disappointed I am to not see Nokia Map have this route at all.
3. Allow route changes on the Nokia Drive+ app. As good as pre-planned trip and using Here.net, there are just tmes that it's much better to allow us to change the route based on latest condition.
4. Never once did I see ANY traffic updates at all on both the Map and Drive+ Beta. When it does shows on my wife's Google's Map/Navigation.
5. I love that under Drive+, it tells you which lane to get into ahead of when you need to make a turn or merge onto another way. However, the flip side of that is that there's no way to know which road you're currently on. This is probably more important for when you're in an area with a lot of highway/local way intersections. Also, it would be great if it also will display the next major 'road' that you will be getting onto.
So far I'm happy with some of the functionality and disappointed in some of Nokia Map and Drive+ and I have about a week left to decide to either stay with WP9 and Nokia or do I want to switch back to Android and Google Map.

hi there,
As this is a user to user forum only, if you wish to leave feedback with Nokia regarding their products and services, you can do so directly by clicking the Nokia Support link at the bottom of this page.

Pb of Mapping and Context

Similar Messages

Maybe you are looking for