Pb to add a view from Siebel Tools to Pharma application

Hi,
I'm just beginner of Siebel. I used a user guide to create my first project. I follow all the steps described, I created a new tab with 2 new views. When I compile my project, I can't find my view and so added it to my application before adding it to my responsibilities.
In Siebel tools, If I add an existing view, after compiling, directly I can see my new tab with the view.
What can I do to make available my new views on my Siebel application?
Thanks for your understanding,
Regards,

Hi,
After compiling the view in tools, you have to add the view to the Responsibility of the user which you log in. The do a "Clear Cache" and logg off. Check again in the application to view the new ones.
Regards,
Joseph Arul Dass

Similar Messages

Discoverer Plus/Viewer from menu item in Oracle Applications errors.

Starting Discoverer Plus/Viewer from menu item in Oracle Applications R12 errors.
Here is some general config information that is suspected to be the issue.
1. Running Oracle Applications R12 over HTTPS.
2. Running Discoverer Plus/Viewer over HTTP.
3. Calling menu item that calls a function to start Plus/Viewer.
Function Definition called by the menu item is listed blow.
Properties Tab: Type=SSWA jsp function Context Dependence=Responsibility
Form Tab: Parameters="mode=DISCO"
Web HTML Tab: HTML Call=OracleOasis.jsp
Fact: Starting Discoverer Plus using a URL works fine in the browser. The login page comes up and I can look in to Plus.
The page that dose a redirection to start the Plus applet or Viewer web page fails with this error in IE 7.
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
Thank you for your time.

Hi,
Check that the ICX system profiles are set correctly for your Discoverer configuration. In particular the ICX: Discoverer Launcher and ICX: Discoverer Viewer Launcher system profiles.
When IE displays an error is the URL displayed in the browser a correct Disco URL?
Rod West

Can we add conversation view in e 71

can we add conversation view in e 71 in messaging application??

> Can someone tell me from where can we select / activate these / such fields.
They are active, no extra action is needed. You saw them, didn't you?
>
> Can anybody provide a list of such additional fields available in SU01
What you see is what you get. You've seen the additional name fields. Apart from that you can click on 'other communication' to see a list of fields there. That's it.

Deploy an Integration Object from 'Local' Tools to Siebel Server

Hi,
I have created a Integration Object on my Local Siebel Tools.
What I would like is to 'Deploy' this Integration Object from my Local Siebel Tools to the Server database..?
& How to do this? Clicking Deploy to RunTime database only deploys to my Local, rather than the server?

Hi,
In tools from 'View' menu select 'Options' there you will find 'Object explorer' tab
click on it there you will find just check the box and it will be visible.

How to write Join View Adaptor which will pull data from Siebel and OID ?

Hi Experts,
I wanted to write web service call where OIF will talk to OVD than OVD will have join adaptor which will pull few data like msisdn from Siebel and view data from oid like given name and generate SAML assertion.
I wanted to know how to write join adaptor for the same
Help Appreciated.

Hi Experts,
Is anyone has any idea on webservice call to OIF which will call OVD that will have join adaptor connecting siebel and oid ?
any help is appreciated

When I open Add-ons, from the Tools menu, I get an unresponsive script error: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsExtensionManager.js:623.

When I try to click on Add-ons, from the Tools menu, I get this error message of an unresponsive script: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsExtensionManager.js:623. This is to say the least about the unresponsive script errors at other times. However, at all times, it won't go away - even by clicking on the 'stop script' option; even with checking the 'don't ask again' option. I've cleared the cookies and history as best I could, but it appears that there is some sort of conflict. How can I resolve this? Kevin: [email protected] Thank you.

This is typically caused by a problem with the Personas Plus 1.6 add-on and it conflicting with the Google toolbar.
Try disabling the Personas Plus add-on. To do this open the add-ons manager by selecting the Tools menu, then Add-ons. In the list of installed extensions click on Personas Plus, then click on either disable or uninstall.
If you can not access the add-ons manager, follow the instructions in the [[safe mode]] article to start Firefox in safe mode. You should then be able to disable or uninstall Personas Plus. You can find more information on this procedure in the [[Troubleshooting extensions and themes]] article.

Is it possible to add and view your key words when creating a web site from Lightroom 4?

Is it possible to add and view your key words when creating a web site from Lightroom 4?

Hi,
I had the same problem with
"java.lang.NullPointerException at com.sap.tc.webdynpro.clientimpl.html.uielib.standard.uradapter.ViewContainerUIElementAdapter.getContent(ViewContainerUIElementAdapter.java:98)"
when I included ViewUsages dynamically in an action handler (outside wdDoInit()).
The code below fixed that problem.
This code creates a new OutboundPlug for the embedding view with the embedded view as target and fires the plug.
// Create OutboundPlug
IWDOutboundPlugInfo outboundPlug = embedderViewInfo.createOutboundPlug();
//Create navigation link
rootViewUsage.createNavigationTarget(outboundPlug.getName(), interfaceViewUsage, "Default");
// fire navigation link
wdThis.wdGetAPI().firePlug(outboundPlug, Collections.EMPTY_MAP);

I hope I could help you. Probably you don't need the information anymore, but perhaps anybody else has the same problem.
Regards, Alex

Mark uncheck from Internet Explorer9Compatibilty View from Browser Mode: IE9 in F12 developer tools

Hi Friends
How can I Uncheck option Internet Explorer9Compatibilty View from Browser Mode: IE9 in F12 developer tools through GPO or script.
OR any other way..
Help and guide me ..I have tried to do it but could not get succeed.

Hello,
GPO questions are better asked to the GPO experts in
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverGP&filter=alltypes&sort=lastpostdesc
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

How can uncheck Internet Explorer9Compatibilty View from Browser Mode: IE9 in F12 developer tools

Hi Friends
How can Uncheck option Internet Explorer9Compatibilty View from Browser Mode: IE9 in F12 developer tools through GPO or script.
Help and guide me ..

Hi Mr. Raj,
Please explain a bit about the following questions for better analyzation:
1. Is the Internet Explorer version 9?
2. Why do you want to uncheck the single option?
3. How about disable the compatibility mode?
To receive better support about script, it is recommended to seek help in script forum.
http://social.technet.microsoft.com/Forums/scriptcenter/en-us/home?category=scripting
Please take a look at the following thread similar to this requirement.
http://social.technet.microsoft.com/Forums/en-US/74da68dc-dd44-462d-addd-c007169b3370/how-to-uncheck-display-all-websites-in-compatibility-view-in-ie9?forum=ieitprocurrentver
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

How to add a table(from TableRenderDemo) to a JFrame again

Hello again:
Thanks for stephen andrews's adivice, I follow your adivice to add code (it is in
EventHandeler of DrawCalendar class, and they indicated by ???????????), but it still not work, please check for me why, Thanks.
My problem
Please run my coding first, and get some view from my coding.
At the movement, I got a problem, I have not idea how to add a table(it is from TableRenderDemo) to JFrame when I click on the button(from DrawCalendar) of the numer 20, and I want the table disply under the buttons(from DrawCalendar).
Please help me to solve this problem, thanks.
*This program for add some buttons and a table on JFrame
import java.awt.*;
import javax.swing.*;public class TestMain extends JFrame{
private static TableRenderDemo tRD;
private static TestMain tM;
protected static Container c;
private static DrawCalendar dC;
public static void main(String[] args){
tM = new TestMain();
tM.setVisible(true);
 public TestMain(){
 super(" Test");
 setSize(800,600);
//set up layoutManager
c=getContentPane();
c.setLayout ( new GridLayout(3,1));
tRD=new TableRenderDemo();
dC=new DrawCalendar();
addItems();//add Buttons to JFrame
private void addItems(){
 c.add(dC); //add Buttons to JFrame
 //c.add(tRD); //add Table to JFrame
*This program for add some buttons to JPanel
*and add listeners to each button
*I want to display myTable under the buttons,
*when I click on number 20, but why it doesn't
*work, The coding for these part are indicated by ??????????????
[import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.awt.GridLayout;
public class DrawCalendar extends JPanel {
 private static DrawCalendar dC;
 private static TestMain tM;
 private static TableRenderDemo myTable;
 private static GridLayout gL;
 private static final int nlen = 35;
 private static String names[] = new String[nlen];
private static JButton buttons[] = new JButton[nlen];
 public DrawCalendar(){
 gL=new GridLayout(5,7,0,0);
 setLayout(gL);
 assignValues();
 addJButton();
 registerListener();
//assign values to each button
 private void assignValues(){
 names = new String[35];
 for(int i = 0; i < names.length; i++)
 names[i] = Integer.toString(i + 1);
//create buttons and add them to Jpanel
private void addJButton(){
 buttons=new JButton[names.length];
 for (int i=0; i<names.length; i++){
 buttons=new JButton(names[i]);
 buttons[i].setBorder(null);
 buttons[i].setBackground(Color.white);
 buttons[i].setFont(new Font ("Palatino", 0,8));
add(buttons[i]);
//add listeners to each button
private void registerListener(){
 for(int i=0; i<35; i++)
 buttons[i].addActionListener(new EventHandler());
//I want to display myTable under the buttons,
//when I click on number 20, but why it doesn't
//work
private class EventHandler implements ActionListener{
 public void actionPerformed(ActionEvent e){
 for(int i=0; i<35; i++){
 if(i==20){ //????????????????????
 tM=new TestMain(); //I want to display myTable under the buttons,
 tM.c.removeAll(); //when I click on number 20, but why it doesn't
 tM.c.add(dC); //work
 tM.c.add(myTable); //???????????????????????????????????????
 tM.validate();
 if(e.getSource()==buttons[i]){
 System.out.println("testing " + names[i]);
 break;
*This program create a table with some data
[import javax.swing.table.AbstractTableModel;
import javax.swing.table.TableColumn;
import javax.swing.DefaultCellEditor;
import javax.swing.table.TableCellRenderer;
import javax.swing.table.DefaultTableCellRenderer;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class TableRenderDemo extends JScrollPane {
 private boolean DEBUG = true;
 public TableRenderDemo() {
 // super("TableRenderDemo");
 MyTableModel myModel = new MyTableModel();
 JTable table = new JTable(myModel);
 table.setPreferredScrollableViewportSize(new Dimension(700, 70));//500,70
 //Create the scroll pane and add the table to it.
 setViewportView(table);
 //Set up column sizes.
 initColumnSizes(table, myModel);
 //Fiddle with the Sport column's cell editors/renderers.
 setUpSportColumn(table.getColumnModel().getColumn(2));
* This method picks good column sizes.
* If all column heads are wider than the column's cells'
* contents, then you can just use column.sizeWidthToFit().
private void initColumnSizes(JTable table, MyTableModel model) {
TableColumn column = null;
Component comp = null;
int headerWidth = 0;
int cellWidth = 0;
Object[] longValues = model.longValues;
for (int i = 0; i < 5; i++) {
column = table.getColumnModel().getColumn(i);
try {
comp = column.getHeaderRenderer().
getTableCellRendererComponent(
null, column.getHeaderValue(),
false, false, 0, 0);
headerWidth = comp.getPreferredSize().width;
} catch (NullPointerException e) {
System.err.println("Null pointer exception!");
System.err.println(" getHeaderRenderer returns null in 1.3.");
System.err.println(" The replacement is getDefaultRenderer.");
comp = table.getDefaultRenderer(model.getColumnClass(i)).
getTableCellRendererComponent(
table, longValues[i],
false, false, 0, i);
cellWidth = comp.getPreferredSize().width;
if (DEBUG) {
System.out.println("Initializing width of column "
+ i + ". "
+ "headerWidth = " + headerWidth
+ "; cellWidth = " + cellWidth);
//XXX: Before Swing 1.1 Beta 2, use setMinWidth instead.
column.setPreferredWidth(Math.max(headerWidth, cellWidth));
public void setUpSportColumn(TableColumn sportColumn) {
//Set up the editor for the sport cells.
JComboBox comboBox = new JComboBox();
comboBox.addItem("Snowboarding");
comboBox.addItem("Rowing");
comboBox.addItem("Chasing toddlers");
comboBox.addItem("Speed reading");
comboBox.addItem("Teaching high school");
comboBox.addItem("None");
sportColumn.setCellEditor(new DefaultCellEditor(comboBox));
//Set up tool tips for the sport cells.
DefaultTableCellRenderer renderer =
new DefaultTableCellRenderer();
renderer.setToolTipText("Click for combo box");
sportColumn.setCellRenderer(renderer);
//Set up tool tip for the sport column header.
TableCellRenderer headerRenderer = sportColumn.getHeaderRenderer();
if (headerRenderer instanceof DefaultTableCellRenderer) {
((DefaultTableCellRenderer)headerRenderer).setToolTipText(
"Click the sport to see a list of choices");
class MyTableModel extends AbstractTableModel {
final String[] columnNames = {"First Name",
"Last Name",
"Sport",
"# of Years",
"Vegetarian"};
final Object[][] data = {
{"Mary ", "Campione",
"Snowboarding", new Integer(5), new Boolean(false)},
{"Alison", "Huml",
"Rowing", new Integer(3), new Boolean(true)},
{"Kathy", "Walrath",
"Chasing toddlers", new Integer(2), new Boolean(false)},
{"Sharon", "Zakhour",
"Speed reading", new Integer(20), new Boolean(true)},
{"Angela", "Lih",
"Teaching high school", new Integer(4), new Boolean(false)}
public final Object[] longValues = {"Angela", "Andrews",
"Teaching high school",
new Integer(20), Boolean.TRUE};
public int getColumnCount() {
return columnNames.length;
public int getRowCount() {
return data.length;
public String getColumnName(int col) {
return columnNames[col];
public Object getValueAt(int row, int col) {
return data[row][col];
* JTable uses this method to determine the default renderer/
* editor for each cell. If we didn't implement this method,
* then the last column would contain text ("true"/"false"),
* rather than a check box.
public Class getColumnClass(int c) {
return getValueAt(0, c).getClass();
* Don't need to implement this method unless your table's
* editable.
public boolean isCellEditable(int row, int col) {
//Note that the data/cell address is constant,
//no matter where the cell appears onscreen.
if (col < 2) {
return false;
} else {
return true;
* Don't need to implement this method unless your table's
* data can change.
public void setValueAt(Object value, int row, int col) {
if (DEBUG) {
System.out.println("Setting value at " + row + "," + col
+ " to " + value
+ " (an instance of "
+ value.getClass() + ")");
if (data[0][col] instanceof Integer
&& !(value instanceof Integer)) {
//With JFC/Swing 1.1 and JDK 1.2, we need to create
//an Integer from the value; otherwise, the column
//switches to contain Strings. Starting with v 1.3,
//the table automatically converts value to an Integer,
//so you only need the code in the 'else' part of this
//'if' block.
try {
data[row][col] = new Integer(value.toString());
fireTableCellUpdated(row, col);
} catch (NumberFormatException e) {
JOptionPane.showMessageDialog(TableRenderDemo.this,
"The \"" + getColumnName(col)
+ "\" column accepts only integer values.");
} else {
data[row][col] = value;
fireTableCellUpdated(row, col);
if (DEBUG) {
System.out.println("New value of data:");
printDebugData();
private void printDebugData() {
int numRows = getRowCount();
int numCols = getColumnCount();
for (int i=0; i < numRows; i++) {
System.out.print(" row " + i + ":");
for (int j=0; j < numCols; j++) {
System.out.print(" " + data[i][j]);
System.out.println();
System.out.println("--------------------------");

http://forum.java.sun.com/faq.jsp#format

I am missing the add objects section from the fly out menu in Photoshop CS6. 3d workspace

I am missing the "add objects" section from the fly out menu in Photoshop CS6. I am in the 3D workspace of Photoshop. "Scene" is highlighted and I have clicked on the little fly out menu in the upper right hand corner of that panel. The whole section that should contain, Add objects, delete objects, duplicate objects, all the way through reverse order is missing. The add lights section above and render section below it is there. I am not new to Photoshop, but I am new to the 3D section of Photoshops work space.
I do know about creating a new layer in the layers tab and merging the objects together trick. But I kind of would like for the program to work correctly as I am sure that doing it that way will cause some sort of problems later in the work process.
Below are the specs of my system.
Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2394 MHz
Built-in memory: 32651 MB
Free memory: 28832 MB
Memory available to Photoshop: 29606 MB
Memory used by Photoshop: 89 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4600
Display: 3
I am actually running windows 8. So I am not sure why it is saying windows NT. Anyway...
Photoshop says that my software is up to date. I use Photoshop daily and everything else works just fine. I have looked through this forum and there is someone else who had the same issue as me but their question was not given a solution. So that is why I choose to post it again.
Any help will be great. Thank you!
Mark.

I've made tests with four different 3rd party tools: OpenGL Extension Viewer, GPU Caps Viewer, Compute4Cash OpenCL Diagnostic Tool and Mudlord's Glide3x wrapper tester. All those tools report no problems with my video card driver and OpenGL/CL.
I have contacted nVidia and based on reports from the tools and visual tests from GPU Caps Viewer nVidia support doesn't see a problem with my driver.
I found sniffer_gpu.exe which according to Adobe Help pages is a kind of diagnostic tool and determines whether Photoshop uses the graphic card OpenCL or not. Here is the output:
Device: 00000000002B1BE8 has video RAM(MB): 1023
Vendor string: NVIDIA Corporation
Renderer string: GeForce GTX 650/PCIe/SSE2
Version string: 3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
OpenCL ok, version=1.1 CUDA 4.2.1
Return code: 3
From Adobe GPU Sniffer tool, it looks OK.
On the other hand, I have your word that there is no problem with Photoshop not recognizing OpenCL for my card and that nVidia driver has problems. Can you justify this somehow? Perhaps you could provide more details on technical level, or another utility to run and extract details, to at least identify the problem Photoshop has and hopefully solve it on either side.
P.S. During tests there were two things which I noticed, but they are probably not related to the issue:
1. One tool reports the lack of Windows registry key SOFTWARE/Microsoft/Windows (NT)/CurrentVersion/OpenGLDrivers. But according to your previous statement, Photoshop only uses OS calls, no registry and according to nVidia, this key is not used in Windows 7.
2. During some tests GPU Caps Viewer reports that "OpenCL CPU not supported on the selected platform". This is not complaining about GPU, only about CPU. But Photoshop is complaining about GPU, so it shouldn't be relevant.

The bar that says "File, Edit, View, History, Bookmarks, Tools, help" has disappeared and I would like it to appear all the time.

Near the top of the screen on the left side, the words "File, Edit, View, History, Bookmarks, Tools, help" does not appear consistently. Sometimes if I hit "alt" they will appear. I would like to keep those words to appear constantly. Let me know what I can do. Thanks

See '''Menu Bar''' below.
'''Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help) Firefox 3.6.x versions allow the user to hide the Menu Bar. 
*Tap the ALT key or the F10 key, Menu Bar will display, click View, click Toolbars, click Menu Bar to place a check mark next to it, '''''OR'''''
*Press and hold the ALT key while pressing the letters VTM on your keyboard, then release the ALT key
*See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Other Toolbars''', see: https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing 
'''Status Bar''': click View, click Status Bar to place a check mark 
'''Full Screen Mode''': If you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See: http://kb.mozillazine.org/Netbooks#Full_screen 
Also see: http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars
 
'''Other issues that need your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.
*Adobe PDF Plug-In For Firefox and Netscape "9.4.1"
**New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
**See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
*Next Generation Java Plug-in 1.6.0_16 for Mozilla browsers
**7 updates behind
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

How do I restore tool bar tha contains File, View, History, Bookmarks, tools & help??

Some how When I
Tried to clear History I deleted the toolbar.
How do I restore this toolbar??

See '''Menu Bar''' below.
'''Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help) Firefox 3.6.x versions allow the user to hide the Menu Bar. 
*Tap the ALT key or the F10 key, Menu Bar will display, click View, click Toolbars, click Menu Bar to place a check mark next to it, '''''OR'''''
*Press and hold the ALT key while pressing the letters VTM on your keyboard, then release the ALT key
*See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Other Toolbars''', see: https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing 
'''Status Bar''': click View, click Status Bar to place a check mark 
'''Full Screen Mode''': If you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See: http://kb.mozillazine.org/Netbooks#Full_screen 
Also see: http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars
 
'''Other issues that need your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.
*Adobe Shockwave for Director Netscape plug-in, version 11.0
*Adobe PDF Plug-In For Firefox and Netscape "9.4.1"
**New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
**See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.

Re: [iPlanet-JATO] Re: onBeforeRequest(); Finding requested view from requestContext

If you want to stop a JATO request in its tracks, you have a little black
magic at your disposal: you can throw a CompleteRequestException. This
indicates to the JATO infrastructure that it should immeditately stop
handling the request, but not generate an error, as the develper has taken
full control. You can generally throw this error from anywhere, at any
point--it is a RuntimeException, and is "tunneled" through other exception
handlers where appropriate.
In your scenario, you want to check if the user is logged in, and if not,
save the target URL using the parsePathInfo() method. Then, forward to the
login page and then throw a CompleteRequestException.
Todd
----- Original Message -----
From: "nickmalthus" <nickmalthus@h...>
Sent: Monday, January 07, 2002 3:05 PM
Subject: [iPlanet-JATO] Re: onBeforeRequest(); Finding requested view from
requestContext
I guess what I am thinking about doing is capturing the requested URL,
i.e. /appname/modulename/RequestName. In the onBeforeRequest(). I
would then check to see if the user is logged in, and if not, set the
URL in the session(or page session of the Login bean) and forward to
the Login viewbean using the viewbean manager. Inside the login view
in the handleSubmit() method I would authenticate the user and then
get the URL out of the session (or pagesession). I would then
magically get the ViewBean/Command object for the URL or otherwise
"forward the request" as if the user had typed in
/appname/modulename/RequestName, which is the behavior I am trying to
acheive.
It turns out I cannot forward in the onBeforeRequest() as it will
output the viewbean and then continue to process the request which in
turn trys to do a RequestDispatcher().forward after data has been
written to the stream which does not bode well with the servlet
container. Thus, it appears I have no control of the request in the
onBeforeRequest() method. Is this correct?
In light of this new observation I am now going to create a base view
class that all views will extend from and override the
onSecurityCheck() method to forward to my login bean. If I can't find
any other way, I will get the URL from the page session and do a
response.sendRedirect() to the URL.
Thanks for the help!
--- In iPlanet-JATO@y..., "Craig V. Conover" <craig.conover@s...> wrote:
The problem is that you don't know what the target view is until it has
been forwarded to.
Think about it... the request handling view bean (or command object)has
the request handler that has the code that will ultimately forward to
another view bean. This is code that you have written. So, until that
forwardTo() is invoked, there is no notion of a "target page".
What you do know is which "page" (view bean) the request is coming from
(the handling view bean or command class). You can get this from the
HttpServletRequest. The attribute name is "viewBean".
So you can get the view bean name by doing the following inonBeforeRequest:
<HttpServletRequest>.getAttribute("viewBean");
But I suspect this is not going to solve your current issue.
You could add the target page name to the page session. If there ismore
than one possible target page, it might get a little more involved.
Let me know if the use of page session needs further explanation.
c
For more information about JATO, including download information, pleasevisit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

If you want to stop a JATO request in its tracks, you have a little black
magic at your disposal: you can throw a CompleteRequestException. This
indicates to the JATO infrastructure that it should immeditately stop
handling the request, but not generate an error, as the develper has taken
full control. You can generally throw this error from anywhere, at any
point--it is a RuntimeException, and is "tunneled" through other exception
handlers where appropriate.
In your scenario, you want to check if the user is logged in, and if not,
save the target URL using the parsePathInfo() method. Then, forward to the
login page and then throw a CompleteRequestException.
Todd
----- Original Message -----
From: "nickmalthus" <nickmalthus@h...>
Sent: Monday, January 07, 2002 3:05 PM
Subject: [iPlanet-JATO] Re: onBeforeRequest(); Finding requested view from
requestContext
I guess what I am thinking about doing is capturing the requested URL,
i.e. /appname/modulename/RequestName. In the onBeforeRequest(). I
would then check to see if the user is logged in, and if not, set the
URL in the session(or page session of the Login bean) and forward to
the Login viewbean using the viewbean manager. Inside the login view
in the handleSubmit() method I would authenticate the user and then
get the URL out of the session (or pagesession). I would then
magically get the ViewBean/Command object for the URL or otherwise
"forward the request" as if the user had typed in
/appname/modulename/RequestName, which is the behavior I am trying to
acheive.
It turns out I cannot forward in the onBeforeRequest() as it will
output the viewbean and then continue to process the request which in
turn trys to do a RequestDispatcher().forward after data has been
written to the stream which does not bode well with the servlet
container. Thus, it appears I have no control of the request in the
onBeforeRequest() method. Is this correct?
In light of this new observation I am now going to create a base view
class that all views will extend from and override the
onSecurityCheck() method to forward to my login bean. If I can't find
any other way, I will get the URL from the page session and do a
response.sendRedirect() to the URL.
Thanks for the help!
--- In iPlanet-JATO@y..., "Craig V. Conover" <craig.conover@s...> wrote:
The problem is that you don't know what the target view is until it has
been forwarded to.
Think about it... the request handling view bean (or command object)has
the request handler that has the code that will ultimately forward to
another view bean. This is code that you have written. So, until that
forwardTo() is invoked, there is no notion of a "target page".
What you do know is which "page" (view bean) the request is coming from
(the handling view bean or command class). You can get this from the
HttpServletRequest. The attribute name is "viewBean".
So you can get the view bean name by doing the following inonBeforeRequest:
<HttpServletRequest>.getAttribute("viewBean");
But I suspect this is not going to solve your current issue.
You could add the target page name to the page session. If there ismore
than one possible target page, it might get a little more involved.
Let me know if the use of page session needs further explanation.
c
For more information about JATO, including download information, pleasevisit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

How can I permanently prevent the Reminder Fox icon (in the Add-on Bar) and the Add-on Bar from showing?

Installed: Firefox 27. ReminderFox 2.1.4. Windows XP Professional
Since ReminderFox 2.1.4 was installed, I have deselected the 'Status/Add-on Bar Display 'Bow' and text on status bar' numerous times, but the setting never takes effect even after pressing the Apply and OK buttons.
The Add-on Bar, which has always been deselected from the View > Toolbars menu, shows as selected in the menu, and even though I deselect it manually, when I close Firefox and then reopen it, it shows again as selected in the menu.
How can I permanently prevent the Reminder Fox icon (in the Add-on Bar) and the Add-on Bar from showing?

It is possible to uninstall the add on or to customize the add on toolbar from the Toolbar Customize option. To troubleshoot this try this article [[How to fix preferences that won't save]]

Pb to add a view from Siebel Tools to Pharma application

Similar Messages

Maybe you are looking for