Pb with K7T266 Pro2

I have just discovered this forum on the site of MSI
I have read the article about bios 3.7beta4, but I don't think that update bios should be solved my problem
In fact when I put one of my DDR module, the test under 3D Mark 2001SE, it works
But when I put two modules simultemously, 3D Mark crashes and I come back to my desktop
I habe tried the different dimm slots and it is the same
I don't really understand because it works since 6 months and today the computreur reboot alone.
I have made tese different tests and I have made theses conclusions
Have you got an idea where the problem comes from ?
Thnaks

Using two different ram-sticks isn't a good idea in most cases.
Tried to increase the ddram-voltage (max. 2.7V)?

Similar Messages

Problems with K7t266 Pro2 and Soundblaster live 5.1

Hi all,
having a bit of a problem here with the above combination K7T266 pro2 and SB live5.1.
When playing music, watching video etc. every now and then I get something that sounds like bus noise, just for a few seconds and then the music continues, sometimes it also happens that video stops during the few seconds.
I have latest bios on mainboard, latest drivers for SB live, Via chipset, latest GPU drivers.
I tried changing IRQ's, took all other cards out, etc.
Nothing seems to work and it is getting very annoying. :( :(
Anyone any tips or tricks??
Thanx
Greetz
Jay Smith

Quote
Originally posted by hansh
Hi Martin,
Some times, there is no other solution than changing the soundcard for another brand (which is not funny to read if you just ordered a new card - but you just might be lucky, right? )
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAA

BIOS SETTINGS optimization with K7T266 PRO2 v.2.0

Hye,
Can someone tell me what are the best settings for my BIOS (AMIBIOS) with my MB MSI K7T266 PRO2 v.2.0.[/u]
My BIOS is an AMIBIOS, v.3.7 (released date 10/14/2002)...
My specifications:
-Graphic card: "GECUBE" ATI Radeon 9600 PRO 256MB
-HDD: Seagate BARRACUDA ATA V 120Go
-ATHLON XP 1700+ (1.5GHz)
-DVD reader + CD Writer
Thanks!!!

http://forums.pcper.com/showindex.php?s=&threadid=124482

USB problem with K7T266 pro2 RU

I have a MS intelli mouse optical. It connects via USB. About 10 times per hour the cursor freezes and the mouse shuts off. I have to unplug the mouse and plug it back in and it starts to work again. This gets very annoying. I am running a clean install of win xp pro. And have recently done a format. It happened before and after the reinstallation of XP. It does not matter if the mouse is plugged into the USB ports by the keyboard connector or the add in USB 2 card. It happens in both places.
Anyone else have this problem or anyone know a fix to it?
Thanks in advance
Mike

I am having the same problems with KT4 Ultra.

K7T266 PRO2-RU and Problem with a FEW DISPLAY ADAPTERS ...

Hello ,
I was using my mainboard with 32 MB Creative Riva TNT2 Ultra until creative's fan was damaged . I tried 16 Creative TNT2 m64 display adapter of a friend of me , but it didn't work with K7T266 PRO2-RU. Many sounds are coming from mainboard while D-LED shows Testing RTC (or boot attemp, I'm not sure about that) (Same symptoms with "no graphic adapter" - I tried again after unplugged the display adapter - )
At the beginning I was thinking that the 16 MB creative graph adap. was broken . So , today I bought a new graphic adapter 128 MB of Creative 3d Blaster5 Radeon 9200SE . When I plugged it into mainboard , I saw the same problems with 16 MB Creative TNT2 m64 . After that , I found another 32 MB Creative TNT2 Ultra from my friend and it worked with my mainboard FINE .
- I tried all of the old bioses of MSI K7T266 PRO2-RU
- I tried to start the computer with no any other devices (such as HDD , sound card , tv card etc. ) . Only display adapter was plugged in the mainboard , but it didn't work . System hanged up everytime I tried .
- I made some bios adjustments which are suggested at this forum ....
But none of these worked .... ?(
What is the problem ? Why only 32 MB creative TNT2 Ultra is working with my mainboard , but 16 MB Creative TNT2 M64 and 128 MB Creative 3DBlaster5 Radeon 9200SE are not while all of them are working FINE with an old PII mainboard . (tvout+DVI) I'm looking forward to hear from you . , Help me please .
Ps : Can new beta bios solve that problem ?
XP pro
2100+ 0.18m XP CPU with coolermaster CP5
40 GB Seagate Barracuda IV
300 watt Codegen Power Supply
2*256 MB Kingston DDR 2100 Memory
( No floppy , no souncard , no tv card etc , no any other devices like cdrom , dvdrom , cdrw etc.)

That's it!
I provided a few PSU's from my friends and tried 420 watt thermaltake and 520 watt VANTEC Stealth 520A PSU ...
Same situation happened and 128 MB Creative ATI Radeon video card didn't work ...
The problem can not be about PSU ...
I tried two different brand of fx 5200 (128 MB ) video card on my system (with 300 watt codegen PSU) . Everything is ok .
And I also tried the RADEON card on my friend's computer which is running with 230 watt Elan Vital PSU . It worked perfectly ...
So what can I think about that situation?
The Answer is : There is something about MSI mainboard ... When I wanted to contact with support center via e-mail , I got an automated e-mail answer which is not completely able to solve any of my problems.
Besides , I saw the problems between brand new Nforce mainboard of MSI and ATI video cards ...
SO , if we get all of these informations together , we can say "THERE IS SOMETHING ABOUT MSI" ...
The solution is not buying expensive PSUs...
That's really bullshit , I can buy a brand new mainboard instead of an expensive PSU.
Finally , I bought an Asus mainboard , everthing is going ok now!
I'll not buy products of MSI anymore because they didn't do anything to solve my problem . Goodbye MSIIIIII ....................................... ........

MSI K7T266 Pro2-RU - problem with the lite-raid - would like to use it as a normal ide

Hi!
I tried to install a single drive on the raid-controller and create a single array for it.
For some reason the disk management in Windows XP does not see it, even though
I have updated the related drivers. However, the Disk management showed it the first time after I had installed the HD onto the raid, but as I could not do anything intelligent with Disk management in regard of the HD, I removed the drive from Disk management with that effect that the disk management does not recognize the drive at all, even though I have now re-created the array on the risk, disabled and enabled raid on the Bios.
I read that there exists modified bios for MSI KT3 Ultra ARU BIOS, which will turn the Raid into regular IDE. That would be something that would most probably be the best way to proceed for me. However, do such bioses exist for MSI K7T266 Pro2-RU? Any other suggestions on how to get the disk management to succeed in recornizing the IDE on the raid-controller would be good to hear as well.
Yours sincerely,
Tero

Ok, I tried updating with the hacked 3.7 Full Raid Bios. Now I seem to have another problem: even though the hacked bios recognizes my HD, it thinks it's about 130 GB, when it in reality would be 250 GB. The hacked bios seems to work ok with Disk Management in Windows XP too, so it's a shame that the hacked bios doesn't seem to have a support for large disks. On the other hand the link at Lumberjacker was dead for the hacked bios v3.6, I would have tried it, if it would have provided me with a good solution to my problem.
I then went back and installed the official v3.7 bios and the lite raid does now recognize the HD being 250 GB, but the Disk Management just states "Missing" in regard of the HD and does not let me do anything fruitful with it. I looked the HD's properties and the Device Manager just states "Hardware device not connected code 45".
How in earth could I manage to make this work now (I do not want to move my other HD:s as they are full of stuff and don't want to risk losing any content)?
General specs of the computer: IDE 1: 60 GB and 120 GB Matrox, IDE 2: Nec2500 and Sony DVD-Rom, Athlon 1800+ XP, 512 MB memory, Ati 9700 np, Network adapter card. The new HD to be added is a 250 GB WD (have removed the jumper)
Thank you for any tips,
Tero

K7T266 Pro2 incompatibilty problem with Nvidia GeForce4 Ti4200

I just bought the GeForce4 Ti 4200 from Siluro and installed it on my MSI K7T266 Pro2 MB and have since then experienced some problems when booting XP pro.
Everything seems to work fine untill the very last application loads in XP after boot. Then the screen turn white, the mouse cursor becomes a black and white stripped square and the system reboots automatically. Generally after second boot, evreything seems to work fine but I get an XP error message stating that "the Nvidia Geforce4 TI 4200 drivers may be the origin of the critical problem encountered".
I have all lastest drivers for both the MB (Bios 3.7 + lastest VIA drivers) and the Nvidia GeForce (Detonator 41.09) and yet experience the problem... Help!!
MB K7T266 Pro2 MS-6380 Ver. 2 (Bios 3.7)
Siluro Geforce4 Ti 4200 (Detonator 41.09
XP Pro

I have an AMD Athlon 1700+
768 MRam DDR 266
Sound card is Sound Blaster Audigy Platinum EX
I have an ADSL connection with Alcatel Modem
I hope this is what you required... If not, let me know exactly what it is as I do not really know what PSU and the rest stands for (or when I can get that information on my PC!)
Thanks again for your help!

K7T266 Pro2 V2.0 G52-MA00434 MS 6380 with T-Bred 2400+

Hi all,
I did the Mod Yesterday with the board in the subject: Bios 3.74 and removed the Cap C37.But the PC don't start. I have no chance to come in the Bios, nothing happens!!!When i took back my athlon 1800+ everthing works fine.What can i do more?i think the cap is removed completely. Is the board ok for do this Mod or only the ru version, but i can not believe?the excuse my bad english i am from germany.Thank you.

could it be my psu is too weak?
need the 2400+ T-bred more power than my 1800+ palmino?
how much more?
I have a 4 pin (square) 12 V cable from the Power Supply Unit (PSU) but nothing on the board to drop in.K7T266 Pro2 KT266A chipset Version2.0 G52-MA00434
did i need a new board or is it enough a new PSU?
my PSU is about 300W, how many watt i need?

[VIA] RAID 0 Data Recovery with MSI K7T266 Pro2

Well my Motherboard has seem to have gone TU on me, and it is well beyond it's warranty.
I have two 60gb HD running in Striped mode using the on-board raid. If I were to get the same motherboard, would this allow me to see the striped array and recover my data, or am I at a loss? I have some of the data backed up, but since most of it isnt, because I have nearly filled my 120GB of space and I don't have a good backup solution.
Thanks.
Current Config:
AMD XP 1900+
MSI K7T266 Pro2
GeForce 4400Ti
Two WD 60gb @ RAID 0.

Quote from: Richard on 29-November-05, 06:33:47
SporkLover,
My current RAID Array is on its 6th or 7th mobo (Multiple different mobo chipsets and different controllers) and I have not lost either the Array, Partition, or any Data.
You just have to make sure that you make the primary HD the same on the new RAID and it is Crucial that you use the same Stripe Size, if you do not, then all data will be lost!
Take Care,
Richard
Rich,
Thats comforting to know! This setup has been the best, and most reliable, so when I bought all of the components years ago, I set it up and forgot most of the parameters.
I completely used up all of the available space so I think that should make guessing that stripe size easy.
osnavi, not entirely sure what happened. It started to lock up on me randomly, and after much trouble shooting and frustration, I gave up. Eventually I saw the problem, a few of the capacitors on the motherboard started to peak, and eventually busted. Not sure what caused it, maybe it was my power supply. Its an Enermax 400W, and when I bought it, it was within the required specs for the processor and Mobo. There was plenty of case cooling, as well as CPU Cooling... so it is a great mystery to me.
Thanks again!

HELP! k7t266 pro2-u winxp install

Hi,
I have a problem with installation of winXP SP1 on my computer. First i got a blue screen in the first step of installation (windows loads drivers, then freezes). It said that acpi.sys is the problem. I disabled it and then the problem was irq not less... . Then i disabled
internal cache, system bios cacheable and shadowing options and installation started but the computer was too slow ( it took about an hour to copy the files on hard disk). After the installation was finished i put back the fields internal cache to writeback and c00 32k shadow to cached and left system bios cacheable on disabled ( i read in the manual that it might be a reason for system hangups) to speed it up. For a while it seemed like it was working ok, i installed the drivers, software... but tomorrow everything up. windows started to freeze when i tried to encode mp3's from audio cd's, when i tried to install new sofware...
I dont know what to do and don't want to disable internal cache because of the huge system slowdown...
Can anyone help !!!
my config is
amd athlon xp 1800+
microstar k7t266 pro2-u with lan
256mb kingston 266 ddr
maxtor 40gb ata133
teac w540e writer
nvidia g-force 2 mx400 64mb

Quote
Hi!
What can your PSU provide in terms of ampères?
Load BIOS setup defaults. Open case.
Have the HDD and the CDRW on different IDE channels and cables, with both as Master respectively at the end of the cable.
Install VIA 4in1 drivers.
When everything works, make proper BIOS adjustments.
Best wishes, and good night!
Can't provide the data about my PSU because i'm not at home right now.
I will do it tomorow.
Cables are already set up like that.
Thank you

Memory module not recognized on K7T266 Pro2

Hello.
I have a computer with only 256 Mb of RAM and I wanted to add 256 Mb but my second memory module of 256 Mo is not recognized whereas it functions very wel.
Here are details :
- Mother board : MSI K7T266 Pro2 (ms-6380 v2.0) with 3 memory slots
- BIOS : Award Modular W6380F1 V3.0 071902
- Memory module of origin : Samsung 256 Mo PC2100 (2 Sides)
- New memory module : Corsair Value 256 Mo PC3200 (1 Side)
Configs Tested :
- Samsung only : OK
- Corsair only : OK
- Samsung in Slot 1 and Corsair in Slot 2 or 3 : the computer starts but with only 256 Mb of RAM (in this config, Everest Ultimate Edition finds both memory modules but also only 256 Mb of RAM)
- Corsair in Slot 1 and Samsung in Slot 2 or 3 : the computer starts with a blank screen and several beeps.
Can somebody help me so that my second memory module is recognized correctly ? I specify that I did not modify the BIOS.
I thank you by advance.

I'm no memory expert, but from being around here I've learned that there is more to a stick of RAM than the MHz speed. If timings etc were perfectly the same for the 3200 and the 2100, the system (the Northbridge) could simply set down memory speed to the slowest of the sticks.
However, I also know that many have been helped by entering BIOS, Advanced Chipset..., and go to the subtitle Memory timings controlled by..., and change from By SPD to By User. Then manually set down to 133 (266 effectively). This is if you absolutely want these two sticks.

K7T266 Pro2 mixing memory ?!?

Hi all,
I am having a problem with mixing memory. The tech. at the computer shop say that a PC2100 and a PC2700 should work whitout problem, so I by one 512MB PC2700 !!!
Here, on my mobo, the memory check pass at boot, but WindowsXP crash when it access the PC2700 memory...
In bios, I set CAS lentacy at 2.5 and force the memory clock to 133MHz...
Note that the PC2700 work fine, alone...
You have idea ? Is PC2100 and PC2700 can be mixted ?
thanks,

Also, I can tell you that this mobo, K7T266 Pro2, is very picky about memory sticks.
Especially when mixing brands.

K7T266 PRO2 (MS6380 Ver 3.0) FDD Controler Problems

I just purchased a new boxed OEM MSI K7T266 PRO2 (MS6380 - Ver 3.0) motherboard from JUST DEALS on E-bay which seems to have very sparce (or none) documentation for download on this site. This is a non-raid board which has the AGP Pro video card socket (with the white lock and release lever at the end of the AGP female connector). The board can also be identified with the following rather unique component/connector layout at the bottom end of the board:
1. In place of where RAID connectors attach to most of these model boards, this board has three aux USB connectors above the connector where the case front panel connectors usually plug in.
2. There are 3 CDROM audio connectors at the lower left below the last PCI slot.
3. To the left of the case front panel connector, there are two rows of connectors and jumpers which appear to be for use with a case which has front panel audio connectors. I believe the jumpers are for the purpose of selecting which audio output to use (front or the standard rear sound output jacks.
4. The area between the last PCI slot and the USB and front panel audio connectors described above, the motherboard is rather blank with no components or even places where optional components have not been installed.
5. This motherboard has a Phoenix bios whereas most other K7T motherboards made by MSI seem to be AMI bios.
6. Finally, when doing a search for MS6380 Ver3.0 on Google, all the hits seem to be in Russian, German or French. I suspect that this MB may have been manufactured for the European market. BIOS display is in English, however.
PROBLEM
I have installed an AMD Athlon TBird 1.2 ghz cpu with 40mb WD hard drive which already had Windows Me and lots of other SW installed. The system boots just fine from the hard drive and all works well except for the Floppy drive. When I try to access the FDD with a know good disk installed with valid data, it comes on and spins up, the front light blinks and after about 30 seconds of continuous running, a message comes up "floppy disk not formated, format now: (Y/N)" If I try to format the disk, it will not format and the system will ask to check to see if a disk is installed. Changing floppy disks does not help, whether this is a disk which has verified data installed or just a formated blank disk. I have tried two different FDD cables and 3 different Floppy drives and always get the same result. I have checked for bent or broken pins in the connectors and found they are all good. The FDD is a 1.44 MB and is connected to the end of the two-drive cable. No other FDD is installed. When I go into the BIOS setup, I verify that Drive A is installed as a 1.44BM 3.5" Floppy and None is selected for Drive B.
I am currently at a loss to know how to proceed here. I am wondering if this could be a BIOS problem but I am not sure if I can find BIOS update on the MSI Web site when they do not even list a MS6380 Ver 3.0 motherboard at all.
I am considering installing a PCI FDD controller card but not sure that these are even manufactured.
Please help.

To Toenne:
Thanks for the reply. This has to be a BIOS problem since the FDD has to be accessed by the BIOS before any software or installed chipset drivers on the HD are ever used. With my problem, I cannot even boot the system from the FDD.
I tried resetting CMOS and that did not help. I wonder if there is some kind of multi-mode floppy disk drive which this BIOS expects to see other that you standard old fashion IBM 3.5" 1.44gb drive. The solution is likely to reflash the BIOS except with this odd MB serial number, I am not sure if I can find the latest BIOS software for this Phoenix chip.
Does anyone know if there are any PCI FDD controller cards on the market where I could disable the on-board controller and use a plug-in card?
Thanks

Raid 0 Failure! XP Pro won't read array on MSI k7T266 pro2 *URGE

Before anything else, thanks for reading and I hope you can help:
I have an MSI k7T266 Pro2A-RU motherboard with 512MB of Mushkin RAM, AMD XP 1600+, a Geforce2 MX400, Audigy Soundcard and a cheap PCI NIC card. I consider myself an above average technician and I've come up on a problem I can't figure out. There is about 80GB of data at stake here:
I have 2 IBM Deskstar 40GB 7200 RPM drives that were configured in a RAID 0 (stripe) configuration over a year and a half ago. This gave me a total of 80GB online. Windows XP Professional was installed and the drives have been running fine every since...
The system was practically bulletproof and it was very rare it ever locked up for any reason. A few days ago, however, the system locked up about 4 or five times. There was no software or hardware that had been added or installed and system use hadn't really changed up or down. I run up to date antivirus software (Command Anti-Virus), run behind a secure firewall and watch what I open. The lock ups were random, but happened when I was away from the computer. ( I leave my system on all the time).
Being a bit paranoid, on 1/28/03, I acquired an 80GB Maxtor drive to install to back up my datafiles. Before the install, I notice the system had locked up at least once that day, so I figured I would hurry up and get the drive in to back up. I installed the 80, booted, configured it in XP and made it active and transfered a few test files over. No problem. I made the decision to back up my data files before bed and continued to work for the next two hours. The system ended up locking up with a windows blue screen STOP error message: KERNEL_FAULT_INPAGE_ERROR when I tried to run a program. Thinking little of it, I rebooted the computer to find I could no longer access the data on the RAID.
I've tried nearly EVERYTHING I can think of. (You can already assume I've done the basics (check/replace the cables, etc). Here's a list and the results:
---- Reboot in all available modes (Safe, Safe with NW, Normal, Last known, etc). They all FAIL. In safe modes, you can see where the system actually tries to boot off the array (runs through driver files and stops on MUP.SYS) and hangs. Same result with all other drives removed except the RAID.
---- Installed another drive, loaded XP with the raid controller files (By the way, it's a Promise ATA 100 "lite" controller), plugged the RAID back in and it hangs on boot up. Safe mode gives the same results. Tried the same thing with Windows 2000 (so I could access the NTFS partition) and Windows 2000 won't load when the array is plugged in, but loads ok when it isn't (used the 2000 driver for the RAID controller for this attempt). Safe mode gives the same results.
---- Removed all drives except the Array and tried to reload XP (with the array drivers downloaded again from the site.) No effect. System hangs.
---- In a last ditch effort, I have access to Winternals Administration Pack 2002 of all of their tools. ERC Commander, designed for this type of problem, Disk Commander, and the other tools all do the same thing: Any time the system attempts to read from or access the arry, the OS will hang. It won't even check for NTFS compatibility in the ERC commander program booting from a boot CD, and for those that are familiar with it, the Disk Commander program blue screens with a STOP: 0x000007B (0xF896963C, 0xC0000034, 0x0, 0x0) error. Research has told me this is an INACCESSABLE BOOT DEVICE message.
These are the main highlight major attempt things and there's a few things in between I've tried (like using Norton Ghost to try and mirror the array to the 80GB. Norton ghost said there is an error reading the partition and can't go any further (Returns an Internal error))
I'm at the point where I have run out of available options and don't know what else to try. I have since purchased the exact same motherboard off e-bay to see if it just so happens to be the controller and to see if my RAID will come back so I can at least read the data off of it. It should be here in a few days. If that doesn't work, I'm toasted. Could I be fighting a hardware (drive or board or controller) problem. Is the array THAT corrupt the OS can't read it???
If anyone has any other bright ideas, I'm willing to try about anything short of damaging the array. Any help is greatly appreciated. Please post here, or e-mail to [email protected].
BTW, the Promise BIOS is Fasttrak 100 "Lite" v 1.31.1(Build 30)
Thanks.
- Chuck! ?( ;( ;( ;( ;( ?(

got one but its lightley used for storage but amd forum storage is full of tales of woe with them
type deskstar and problems in goggle for a laugh

K7T266 Pro2 RU, Raid-0 & Linux

When I try to install either Red Hat 8.0 or Mandrake 9.0 on my K7T266 Pro2 RU, which has 2 x 40GB drives configured as RAID-0 (ie 1 x 80GB), both versions of Linux see the two physical drives and not the one logical stripe array. Why? It almost seems that the Linux drivers for the Promise 20265R are treating the raid channels and normal IDE channels. I want to install Linux onto the RAID-0 stripe!
I have searched for guides/tutorials on installing Linux on RAID, but all the ones I found only talked about RAID-1 (Mirroring).
Windows 2000/XP only sees the one logical drive.
Any help would be appreciated!
Chris.

The installer is wrecking the /etc/raidtab file when trying to detect existing raid arrays.
Solution: Format a floppy disk with a DOS filesystem (in Linux, you can use the command "mkdosfs /dev/fd0"). Copy
use detect_devices;
package detect_devices;
log::l("PATCHING");
*raidAutoStartRaidtab = sub {
my (@parts) = @_;
log::l("patched raidAutoStartRaidtab");
$::isInstall or return;
require raid;
#- faking a raidtab, it seems to be working )
#- (choosing any inactive md)
raid::inactivate_all();
foreach (@parts) {
   my ($nb) = grep { !raid::is_active("md$_") } 0..7;
   output("/tmp/raidtab", "raiddev /dev/md$nb\n device " . devices::make($_->{device}) . "\n");
   run_program::run('raidstart', '-c', "/tmp/raidtab", devices::make("md$nb"));
unlink "/tmp/raidtab";
use raid;
package raid;
*prepare_prefixed = sub {
my ($raids, $prefix) = @_;
log::l("patched prepare_prefixed");
$raids or return;
&write($raids, "/etc/raidtab") if ! -e "/etc/raidtab";
eval { cp_af("/etc/raidtab", "$prefix/etc/raidtab") };
foreach (grep { $_ } @$raids) {
   devices::make("$prefix/dev/$_->{device}") foreach @{$_->{disks}};
to the floppy disk. Remove the floppy and reboot using the Mandrake Linux 9.0 CD1 to do a CD-ROM installation. During boot, press F1 at the splash screen, then place your floppy disk that contains patch.pl in the floppy drive. At the prompt, type "patch", then follow the installation as usual.
Hope that helps

Pb with K7T266 Pro2

Similar Messages

Maybe you are looking for