PB won't boot from one specific battery

Does anyone know why a fully charged battery would not have enough juice to boot a Powerbook? I have a third party battery (Hi Capacity 4400 mAh) that will run fine once I boot from an ac adapter but I can't boot from this battery. I've tried it in different Powerbooks and I got the same result.
It used to boot fine.

Notes from System Profiler:
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 3925
Remaining Capacity (mAh): 1247
Amperage (mA): -2051
Voltage (mV): 10983
Cycle Count: 196
Coconut battery has the same data.

Similar Messages

IPhone won't receive emails from one specific person

My iPhone 4S will not receive emails from one specific person.
It sends and receives emails from anyone else ok, I can send emails to this person with out problem, but it will not receive them.
If I check my webmail it is there, but it won't download to my phone? If I forward their email to myself from the web the forwarded one will be there, but not their original?
I receive emails from others in the organisation ok. And it used to receive them all ok, on about December 27th it stopped?
Anyone have any ideas on why this has happened and what I can do to fix it.
Thanks
Mike

She did have a 1 in front of the number, however she deleted it and the texts still aren't going through. Any idea what else it could be?
EDIT: Spoke too soon, just came through. It was just liek 20 minutes delayed.

Powerbook G4 500 won't boot from battery only

Hi,
I have a Powerbook G4 500 Ti (running OS 10.4.8 that will not boot from just the battery without the powercord attached. I have tried several different batteries and the same results.
Sometimes under "About this Mac" the battery show's it's there but most of the time it doesn't show a battery and an X appears on the desktop.
What I've done - replaced the battery with a fully charged one from a working PB, reset the PMU, Reset the Pram, Cleaned the contacts on all batteries and in the battery bay, Reseated the Airport card, Down loaded the latest Apple updates today and loaded them.The computer runs great with just the powerchord and sometimes the battery icon shows a picture of a plug, but then it reverts to the X.
Another problem, I have a working Airport card installed from another machine and it doesn't show up in the About this Mac window I get Airport Card: No INFORMATION FOUND that it is installed. Could this be related and also can a dead PRAM battery cause this? Any help would really be appreciated I've tried everything. Thanks for your response in advance.

Hi, Opie. A dead PRAM battery will generally prevent a Tibook from starting at all, with or without the AC adapter or a main battery in place. Therefore, I doubt that that's your problem.
Your Airport card cage and your battery are both connected (separately) to the Powerbook's main logic board. it is possible for those connections to work loose over time, or to be hindered by oxidation on the contact surfaces. You can try disconnecting and then reconnecting each of them several times to wear away oxidation and make sure the connectors are properly seated.
This page is the starting point for a complete, well-illustrated set of take-apart instructions for the 500MHz Tibook. The bottom illustration on the page that shows how to remove the keyboard shows the battery connector: a large white plug with several multicolored wires attached, directly beneath the keyboard's left-hand Command (Apple) key. The last illustration in the instructions for removing the Airport card shows the card's connector: a rectangular tan or orange tab at the right-hand end of the flex cable that is connected to the Airport card socket. While you have the bottom cover of your Tibook off, check to make sure the card is firmly seated in its socket and that the flex cable is solidly connected to the logic board.
Another possible reason for the battery's not being detected sometimes: Some 400MHz and 500MHz Tibooks had an ill-fitting battery: it slopped around in the battery compartment and could lose contact. Apple offered for some time to install free of charge a small shim that took up the slack inside the battery compartment and kept the battery pressed against its contacts. If that correction was never made in your Tibook, or if the shim has fallen out or shifted from its proper position, your Tibook may be suffering from the original problem now. Check to see that there is no movement of the battery once you snap it into position in the battery compartment. If there is any, post back for guidance on making and installing a shim. (Apple long since discontinued the repair program, and it's a simple thing to make yourself.)

Won't boot from 10.2 CD

However I tell my computer to boot from my 10.2 CD, it won't get past the silver apple screen, specifically it gets there, the drive sounds like it's not able to read the CD, and the screen freezes with the same exact horizontal distortion thing. Kind of like when my nintendo would freeze..crap garbage pixles...anyway, when in X, or 9, the drive reads the disk, and will display on the desktop, it just won't boot from the CD. I've already tried zapping the p ram (1,2,3 "briiiinnngs") as well as the v ram (4 "briinngs"...is that right by the way?).
The reason I'm trying to I'm trying to reinstall 10.2, is because my I tried to install the quicktime update, which was unsuccessful, and now **** (dang) near nothing works.
Thank you for any help
- Aaron Lennon Ochs Linn

Do you have 2 internal hard drives? If you do, it may have something to do with the jumper settings on them. Try disconnecting one. If you only have one hard drive then check the condition of the CD/DVD you are trying to boot from. It must be clean.

New HDD installed in PowerBook G3, won't boot from installation disk.

I just installed a new hard drive in my G3 Wallstreet and I can't get it to boot from the original Apple CD.
I've tried holding the C key as well as +⌥+⇧+⌫, but to no avail.
The CD tests fine in my old iMac G4, so maybe the culprit is the optical drive, but then again, I'm not so sure.
Is there a way to either boot my PowerBook or install OSX from my iMac G4?
Message was edited by: rick268 Also, I can boot into Open Firmware just fine.

Thanks for your help.
WeLoveMacs wanted $50, but I just scored an entire topcase on eBay for $15, shipped. We'll see what happens.
Allan Jones wrote:
I maintatined three Wallstreets for a friend for years. They stayed in regular service from new until he replaced them with MacBook Pros last summer!
In the years of keeping the old soldiers almost relavent, I ran into a "won't boot from a system disk" issue on two of them. In both cases, replacing a dead PRAM battery fixed the issue. Don't ask me why but that was the only thing that fixed them.
When I was supporting those, you could still get new Wallstreet batteries from Other World Computing. Today they no longer show them. I'm not sure where to steer your for a new one. USed batteries are like used chewing gum, IMHO.
You can try disconecting the wire from the PRAM battery to the logic board. That might help. Requires some take-down:
http://www.ifixit.com/Device/PowerBook_G3_Wallstreet

IBook on 10.4 won't boot from Install Disk

Hi - Somewhere along the line I lost DiskUtility from my iBook running 10.4.11. I thought I could run it from the Install Disc but I find the iBook won't boot from the Disc and DU won't run from the Disc (when I do manage to track it down there).
I have install discs from a G4 Powerbook and a MacBookPro Unibody but I'm concerned about repairing permissions from the wrong version of DU (even if I could get the iBook to boot from those discs). Is a newer disc OK? I want to run or install DiskUtility. What are my options??
How can I get the iBook to boot from its install disc?
TIA your expertise...
j2

The installers are machine-series specific. And the Intel disc won't work
in the PPC Mac, additionally. If you have the correct disc for that iBook,
then you can boot the computer with the disc inside the optical drive
and hold the C key down, until Installer appears on the screen; a second
screen after the initial language screen has a full menu bar and Installer
in the header; options appear in the drop-down menu lists, Disk Utility is
among utility and other features listed in there.
If you do not have an iBook G4 disc or an OS X disc retail version capable
of doing the job, you really should get the correct disc. In a few instances,
another path may work, but is not recommended. And you could lose the
content of the hard drive in the computer you are hoping to save.
However, you may be able to use Pacifist to get Disk Utility from the PB G4
installer disc to be made available on the desktop of the iBook, and use
Pacifist to install that extracted package item from the other PPC install disc.
This does not use the installers on the disc media, so Pacifist is used to do
the process. The iBook ideally needs a replacement disc set, and that may
be available from Apple online store's sales support (see online phone#)
and the product would be matched by serial number. A fee is involved.
The original software disc set would have the correct Apple Hardware Test
and the software kit as included when the computer was new.
If Tiger did not ship with the computer in question, then a full retail disc 10.4
installer could probably be used; since it would be newer than, say 10.3.9.
In natural progression, the newer disc of correct kind & type supported by
the computer is a possible path; however a Leopard disc won't help fix Tiger.
You could also use Disk Utility in one PPC Mac, via FireWire Target Disk
mode, to repair the drive of the iBook. It would only appear as a hard drive.
So, repairing disk permissions would not be possible, on a non-boot volume.
This, only within limits; differences in build versions of OS and custom installs
done to a computer configuration may make doing so very limited. I would
not expect an Intel-Mac's version of the same OS to help a PPC in any way.
Good luck & happy computing!
{ edited 2x }

PowerMac G4 (AGP) suddenly won't boot from its internal HDs

Hi, here's a description of a weird and sudden issue on my mac. Hope one of you out there has a cure.
The system: Powermac G4 (AGP) 450MHz, 512MB RAM, upgraded a couple of years ago with an 133 ATA controller card (Acard 6280M). The card controls my two internal HDs of 160GB, which are from two separate brands. Until 1 week ago I regularly booted from one HD with OS10.4.6 (let's call it hd_A), while used the other HD as a data backup space (hd_B).
The problem:
-1 week ago I upgraded hd_A to OS10.4.7 using the incremental package. The system restarted once without problems, but from the second time, all attempts failed. The startup screen showed the flashing question mark: a boot system could not be found.
-I thus booted from the install DVD (10.4) and installed OS10.4.0 into hd_B. The system was then able to boot from hd_B only on the first attempt. From the second, again flashing question mark. Note that on that single successful boot, I verified that hd_A was readable and apparently intact, plus ran DiskUtil which reported no problems on either HDs.
-Running DU from the Install DVD reports no problem on either HDs.
-Running Startup Disk from the Install DVD correctly reports bootable systems 10.4.7 on hd_A and 10.4.0 on hd_B, but attempting a restart from either of them leads to the flashing question mark.
-Resetting PRAM didn't help.
-Holding option during startup brings up the boot volume selection screen with the options of the Tiger install DVD or the 10.4.0 system on hd_B (note that 10.4.7 on hd_A is not shown). Selecting 10.4.0 on hd_B leads, after a delay of a few seconds with a blank screen to a sudden autonomous shutdown of the computer!
Other data:
-The battery reads 3.7V on a voltmeter, so it must be ok.
-Curiously, System Profiler run from the install dvd reports the two internal HDs as 'removable media'. Can's say how it reported them previous to the entire issue.
Thanks, Lo

You can't use the iBook installer on another model Mac. You need a retail version of Panther 10.3 or Tiger 10.4.
If you do a Google search for M9227LL/A (Panther 10.3 retail install CDs) or M9228LL/A (Family Pack), you may find a set. The CDs should be black with a white X.
After you install the base 10.3.x, update to the final Panther version 10.3.9. See Mac OS X 10.3.9 Update (Combo) http://support.apple.com/kb/HT2464
Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4) . Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray). Expect to pay (possibly a lot) more than the Apple list price of $129.
Also check this web store http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521
Possible Alternative if you are currently using Panther 10.3 – Do a Google search for Tiger 10.4 Upgrade DVD . It will upgrade your 10.3 to 10.4, but it doesn’t contain the full retail Tiger installer. Should be cheaper than the retail Tiger install DVD.
After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
http://www.apple.com/support/tiger/install/
You can also download the Tiger Installation and Setup Guide
http://manuals.info.apple.com/en/TigerInstall_SetupGuide.pdf
When you upgrade the OS, do it via Archive & Install. See About the Archive and Install feature http://support.apple.com/kb/HT1710
Be sure to select Preserve Users & Settings. Also, repair permissions before and after the install.
 Cheers, Tom

S10-2 Won't boot from hard drive

I have an S10-2 2957 that won't boot from the internal hard drive. The one key function doesn’t work either. After the splash comes up and the BIOS runs all that is displayed is a flashing cursor. If I boot from an external source (USB CD) I can see the hard drive and all files are intact. I have tried removing the battery and power supply, holding the power key for 30 seconds before powering the unit back up to no avail. I’m thinking that either the boot sector is corrupt or the first partition is not active. Any ideas?
Solved!
Go to Solution.

press f8 to load when you see lenovo logo at start-up, and select safe mode. post back the results.

Hi guys I'm really in need of some help. I have an IMac I3 for a while now I've been having a problem of my machine refusing it shut down , it goes to a blue screen with a spinning wheel but doesn't shut down. And now won't boot from install DvD

Please some one help me ...
A) my mac won't shut down with external HD connected (if it's been used)
B) there are disk permissions that can't be fixed SUID stuff ..
C) I have now verified the Mac HD and it tells me it's corrupt in bold red writing and to start up from install DVD
D) it won't boot from DVD so I cannot run the repair , initially the machine was spitting it out on start up , now it appears to be attempting to boot off DVD , well it sounds like it is .... BUT it's hanging with the Mac Logo and a wheel ... For um .... 30min now...
E) weirdly when OSX is booted off the hard drive , it won't recognise the Install DvD or the applications one... It just spits them out....
I had an old PPC 17" and it was a beaut .... Never had a single problem with it ...
I bought this one December 2010 and it's been nothing but issues for a computer in excess of £1000 I'm extremely disappointed ... And weirdly the shutting down issue started when it was a week out of warrantee ... I feel conned and am almost at the point of throwing it at a wall and buying a PC

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

MBPro Won't boot from CD

Hello there,
I just brought home a brand new MacBook Pro. This was actually a replacement Apple gave me since my last computer wouldn't work.
When I opened the computer up for the first time and went to set everything up, I chose the option to restore my settings from a backup on my external HD. The backup was from the same OS version as this MacBook (10.5.6), but that Macbook Pro wasn't one of the new ones with the black screen, if that makes any difference.
Everything went smoothly, but once I had restored and started up for the first time I thought I would rather restore from a different backup instead. I went to try and reinstall and the computer won't boot from the CD at all. When the disc is in the machine it can be read, though. Opening the Mac OSX install disc on the desktop and selecting restart from the install menu restarts the machine but it does not go to the install or disk utility screen, instead it starts a continuous restart loop until I hold down the option key and select the HD instead of the disc.
*I have tried the restart from install menu on desktop option.*
*I have tried holding the "option" key during startup and choosing the startup disc*
*I have tried holding "c" when starting up*
*I have tried resetting my PRAM by holding CMND OPTION P R*
This install is working perfectly so far aside from this. However, it worries me that if I do have an actual problem and need to boot from the cd to solve it I won't be able to.
Any ideas?
Thanks!
-Spencer

You might be right about the cd's, except if so that greatly upsets me with the Apple store.
When they took my old laptop that they were replacing (which took a month to begin with), they asked if they could use the box from the new one to send back the old one. I said this was probably alright. The next day though I called and mentioned that they didn't give me the install cd's out of the box, they only gave me the computer and the power cord. They said though that my old cd's should work fine.
The computer that broke was an older MacBook Pro that came with Tiger.
This computer is one of the new generation Macbook Pro's that was supposed to come with Leopard... so, wouldn't they be cheating me somehow by doing that anyways? My Tiger discs definitely don't work, anyways, neither do my Leopard discs for my iMac that I got in September. I even bought Leopard for the old laptop back in September as well, but that disc won't work on this MB Pro either.
I got a little frustrated and tried to see if I could reformat from Single User Mode a few moments ago though, but when I held CMND S on start up I couldn't even enter single user mode... I just got the flashing question mark and folder. Tried to reset NVRAM by holding X as well, and got nothing. Holding Shift on startup resulted in a flashing question mark as well. Very confused.

Won't boot from internal HD

Hi guys, my MacBook won't boot from internal HD. The boot up chimes without Apple Logo and ends in a question mark folder.
I'll explain how I ended up with this boot issue:
I deleted a folder called “usr” with many other folders like “x11” in it from Volume/Macintosh HD. I couldn't launch iTunes afterward so I shut down and stuck with the shut down wheel spinning screen, so I force shut down and restart.
The Apple Logo showed in boot up but froze with Kernal Panic (You have to force shut down the computer...). I tried to restart many times after Resetting PRAM but the same. I'm afraid it's a hardware issue so i removed each third party RAM one at a time, still the same.
Since the hardware test CD also checked with no problem, I decided to boot from Snow Leopard Installer DVD to Repair Permission & Disk. Nothing needed to be fixed so I reformat the internal HD and reinstall OS X 10.6. The installation finished in 40 minutes but won't boot from the HD.
This lead me to think that it could be a HD failure (but Target Disk Mode shows up perfectly fine, the HD is readable) so I replaced it with my previous 250GB 2.5“ HD and did a clean installation of OS X.
I'm still stuck with the same boot up without Apple Logo and ended up with a question mark folder. Both HD (500GB & 250GB) are fine and readable with OS X in it, but it just doesn't boot.
Does anyone experience this before and any feedback will be very much appreciated. I'm really worry and I have a deadline coming next week...

Although it's possible the hard drive has failed, it's more likely that system files have been damaged. The question mark means no bootable system was found. Before throwing in the towel you might try the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Mac Pro 2008 won't boot from install disc - black screen

Hello,
I recently purchased a new hard drive to replace the original that came with my Mac Pro 2008. I was able to format the new drive using Disk Utility. I am now at the point where I need to install OS X onto the new drive, but the computer refuses to boot from the disc. The disc is recognized by the computer (I can access the disc and am able to use the BootCamp applications, etc.) but I just get a black screen when trying to boot directly from the disc. The computer boots fine otherwise.
I have tried the following:
I have tried using both the gray install disc that came with the computer and the Snow Leopard Install DVD disc.
I have tried booting using the "C" key and the "option" key but still receive a black screen following the chime (I've held these down for several minutes).
I have tried restarting from either install disc using the Bootcamp Assistant.
I have tried running the installation software to get it to restart from the disc.
I have tried a combination of the drives, i.e. trying to boot from the discs with just the new drive installed, just the original drive installed, and with both in bay1 and 2.
Everything results in the computer starting up, hearing the chime, and then nothing..just black screen. I have the original drive partitioned with BootCamp with OSX Snow Leopard and Windows 7 installed (I don't know that that matters).
I am at a loss as to what to try next. It doesn't seem like the superdrive because it is recognizing the disc, it just won't boot from it.
Any help is appreciated, thank you.

Clone should be a must and easy to do and learn (learn by doing! 2)
6800 would 'qualify' as 5x70 series flashed etc and same rule: 10.6.5
In the past there was 10.4.6, 10.5.6, but not 10.6.6 - even though strong need for such a DVD.
10.6.8 DVD would be excellent
Lion or ML - buy, download, make an installer flash card would be what I would do at this point.
Then keep both - dual boot as you learn and test and see what ML does and waht you had that required Rosetta to support PowerPC. See www.roaringapps.com about that.
With Carbon Coyp Cloner - was share, now commercial, great utility been around since 10.2.2 at least - this time 2003. 10 yrs.
You can clone the system folders, you can even selectively choose. You can skip copy of most of your home account and do that separately to another drive if you want.
Clone Windows with Paragon or WinClone and use Windows 7 or 8 DVD to do a system repair (automatic) or to edit the BCD file. It can and should - and all you do is boot Windows 7 DVD w/ only the one drive present and go at it. Piece of cake. But yes, Windows gets fussy if you change or remove or move. BCD to the rescue. A proper program for cloning like Paragon's "Clone OS" meant for going from disk drives to SSDs, knows that and how to do it.
Back to how to clone etc:
Clone
Disk utility has RESTORE which will also clone your system but not the Lion Recovery partition. Oddly Apple did not 'endorse' making bootable clone of the system which works too but most choose Carbon Copy Cloner - it works more consistently; it allows for smart update of the backup volume. Both can backup to a sparse disk image if desired.
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
Create an OS X Lion Install disc
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
The DVD is dependent on your hardware. And your hardware changed. The drivers for the 5780 and 6xxx are bundled in the OS and lacking. Minimum build thing.
Put the new drive anywhere you want. Does not matter. Can move it later. Can be drive bay 0-3 or a Firewire external or under the DVD drive.
When you clone pull the old drive and boot from the newly cloned.
After that keep a backup clone around all the time. Takes less than 10 minutes to do a smart update to copy just the changes to keep it current. So you have working copy of the system. I keep Clone "A" that I keep "as was" the system as of last month or whatever (like 10.7.4 before upgrade to 7.5).
Comes easier after doing it once and have all your ducks in a row.

G5 won't boot from Install Disc or Hard Drive

After 2.5 years of perfect service my G5 2.0 suddenly won't boot from the HD or Install Disc that came with it. My G5 only shows the grey screen with the apple logo, the spinning gears and the circle with the line through it.
I haven't added any hardware since day one. I've done pram,nvram and smu resets. I've selected a start up disk by holding the option key, removed and re-seated the ram one by one.
The Apple Hardware test CD shows everything passing. I ran Disc Utility from Target Mode from my MacBook Pro and it showed the G5 hard drive is in working order.
I think I have a hardware issue.
Is it worth it to get this model repaired if its something major?

I was having a similar problem, except I only saw the grey apple logo, no spinning. Finally got it figured out, ended up being one of my processors (dual 1.8) was bad, took the bad one out and it works fine now. Now Im working on getting processor replaced.

G3 Beige: grey screen at startup; no icon; won't boot from CD

G3 Beige, OS 9.2; working perfectly for past year.
I was using a D-Link wired router, to this and my other Mac, G4 Graphite OS X Tiger.
Having just gotten a netbook, I installed a D-Link wireless router (DIR-615), and changed the ethernet cables for both (non-wireless) Macs over to the new router. (It had been configured for me by a Staples Associate where I bought it.)
The netbook and the Graphite G4 worked as they should, but upon restart, the G3 Beige not only wouldn’t boot, it didn’t even show a sad Mac or a question mark. It chimed, but only has a grey screen. Cursor works (& keyboard); nothing else.
I disconnected ethernet cable; same grey screen upon restart.
Won’t boot from Norton or Mac OS 9 CD, pressing “C” at startup.
Zapping pram didn’t help.
Shift during startup didn’t help.
Now what??
TIA.
PS: Meanwhile, I'm afraid to connect my emergency spare 7300 w/G3 upgrade & OS 9.1 to that router. Should I?

The next thing to try is re-seating the sound card. The backpanel is only well-supported on one side, and the sound card takes a beating in all the Beige G3s and similar Macs with tumble-open or lift open designs (but not the All-in-One). Jeff suggests you remove the exterior third screw \[and leave it out] and bend the top tab slightly before re-installing the two screws on the rail. This helps push the sound card back into the slot and keep it firmly seated.
Do you have any SCSI devices or SCSI cables connected? A dangling SCSI cable or a badly-terminated SCSI device can cause a Hang where you describe.

Xserve G4 Won't boot from Anything

Everyone:
I have a G4 Xserve (slot load) with 2 GB of RAM installed. It was running X.3.9 just as happy as a lark. I migrated all users from the server to use it as a test environment. My first test was to upgrade it to Tiger, which so far has not gone very smoothly.
The Xserve has all 4 bays populated. Bays 1&2 are mirrored using Apple's RAID software, this is the system drive. Bays 3&4 are set as a RAID 0.
My Upgrade goes like this: I inserted the Tiger Server CD (no DVD drive), double-clicked the installer and the server rebooted. The installed seemed to go smooth, but I did have to walk away from it towards the end. When I came back, the server was stuck at a blue screen and a moveable mouse pointer. Couldn't do anything else.
This forced a hard reset, of which the same thing happened. So I thought, no big deal, let's just redo the installation. Insert Tiger CD again, hold down C key....server boots from hard drive and gets stuck.
Weird.
Ok, let's try booting from the Panther CD. Reboot server, hold down mouse button, eject Tiger CD, insert Panther CD, reboot, hold C key....server boots from hard drive and gets stuck.
Dang. This was supposed to be an easy upgrade.
Just so things aren't confused, I pull out the drives with the Raid 0 (Bays 3 & 4). Same process.
OK, maybe it's the Raid on the system drive, so I pull out one of the drives. Same boot process.
Reset the PRAM, just for grins, no change.
Alright, let's see if I can force it to recognize the CD, pull out all the drives and put in a spare, brand new drive from the shelf.
Same thing, won't boot from CD. Neither Panther or Tiger. At least I get the blinking icon that there's no OS installed.
Put the #1 system drive back in, connect an external firewire CD Drive, still won't boot from CD. I still get to a blank blue screen, though.
Try booting in Single User Mode, I still get the same thing, boots from disk to blue screen.
Now I've spent an afternoon of my time and another techs time and we're both scratching our heads. I recalled that I could also issue boot commands via the Sys ID button. Dig out manual, find the combination, same story. Boots from hard drive to the blue screen and stops.
Seems like any input at boot time is being ignored, although it will eject the CD if the mouse is held down. I've verified that the machine is not locked (the light is off). I also opened it up to make sure that the lock switch wasn't partially stuck. Not sure if there's anything else to check.
Thoughts?

does that mean I have to send it to Apple to fix
No. Apple changes the bootROMs from model to model so you can't use the same install disc on different models. It could their way of dealing with piracy.
Example; Say I bought a new MacBook Pro and I had an iMac that was still running Leopard. I couldn't use the Snow Leopard install disc from the new MBP to install SL on the iMac.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

PB won't boot from one specific battery

Similar Messages

Maybe you are looking for