Pbm While trying to change Method in BADI

Hello Friends,
While i am trying to change the Method in BADI it is showing the following below message.Like
Choose a Change request with target system /Q-ECC5/
Can i get your valuable suggestion on it.
Thankyou
Anil.D

Hello Anil
Your question is misleading. I assume you do not want to modify a BAdI interface methods but the coding of an implementing class.
Local transport requests cannot be transported and, therefore, do NOT need any target system (you can find this within the properties of the request).
However, in your case you want a "tansportable" request and here you need a target system which apparently is NOT automatically filled into the request properties.
Solutions:
Add the target system to your request
Perhaps you try to change the class method on the wrong system (not DEV system)
Regards
Uwe

Similar Messages

While trying to change a BOM with transaction CS02, a runtime error appears

While trying to change a BOM with transaction CS02, a runtime error appears.
In intial screen he entered material ,plant BOM usage and date valid from after executed then id displayed item list in that he wantu2019s delete one item, he has been deleted selected item after that when he was saving he is getting runtime error
Developer trace
ABAP Program SAPLKED1_WRITE_CE4_BPS1                 .
Source LKED1_WRITE_CE4_BPS1U01                  Line 30.
Error Code SAPSQL_ARRAY_INSERT_DUPREC.
Module $Id: //bas/640_REL/src/krn/runt/absapsql.c#17 $ SAP.
Function HandleRsqlErrors Line 775.
RABAX: level LEV_RX_STDERR completed.
RABAX: level LEV_RX_RFC_ERROR entered.
RABAX: level LEV_RX_RFC_ERROR completed.
RABAX: level LEV_RX_RFC_CLOSE entered.
RABAX: level LEV_RX_RFC_CLOSE completed.
RABAX: level LEV_RX_IMC_ERROR entered.
RABAX: level LEV_RX_IMC_ERROR completed.
RABAX: level LEV_RX_DATASET_CLOSE entered.
RABAX: level LEV_RX_DATASET_CLOSE completed.
RABAX: level LEV_RX_RESET_SHMLOCKS entered.
RABAX: level LEV_RX_RESET_SHMLOCKS completed.
RABAX: level LEV_RX_ERROR_SAVE entered.
RABAX: level LEV_RX_ERROR_SAVE completed.
RABAX: level LEV_RX_ERROR_TPDA entered.
RABAX: level LEV_RX_ERROR_TPDA completed.
RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
RABAX: level LEV_RX_END entered.
RABAX: level LEV_RX_END completed.
RABAX: end RX_RFC
In sm21
Perform rollback
Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
     Short dump "090618 110101 donalda 11557 " generated
Runtime Error          SAPSQL_ARRAY_INSERT_DUPREC
Exception              CX_SY_OPEN_SQL_DB
       Occurred on     18.06.2009 at   11:01:01
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLKED1_WRITE_CE4_BPS1" had to be terminated because
one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"RKE_WRITE_CE4__BPS1" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
How to correct the error
The exception must either be prevented, caught within the procedure
"RKE_WRITE_CE4__BPS1"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
"SAPLKED1_WRITE_CE4_BPS1" or "LKED1_WRITE_CE4_BPS1U01"
"RKE_WRITE_CE4__BPS1"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.

Hi ,
you are getting beacuse u are trying to do mass update to database.
Please check that below note are applicable to your system.
Note 453313 - DBIF_RSQL_ERROR_INTERNAL for mass insert
Note 869534 - AFS MRP doesn't work properly with all BOM item categories
Thanks Rishi Abrol

While trying to change password getting ora-00600 [4842] - Plz help

while trying to change password getting ora-00600 [4842] - Plz help
database : 9.2.0.4
o/s : Linux

Hi,
when getting an ORA-600 you always should contact Oracle support please ;-)
To diagnose an ORA-600 the stack trace will be necessary - see the trace file mentioned in the alert.log when the ORA-600 did happen.
But FIRST OF ALL you should definitely apply patch set 9.2.0.8 and see if this error happens again (metalink.oracle.com ==> PATCHES ==> Quick Links ==> <your platform>). Support will ask you to do the same before they start diagnosing anything in this case.
And please keep in mind that 9.2.0 has reached end of Premier Support more than 1 year ago.
Kind regards
Mike

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

I have the same problem, and the solutions in Error changing modules | Lightroom do not work. Even uninstalling and reinstalling a new copy did not solve the problem. As anyone got an idea what other lingering files might be causing the problem?

Error while trying to Change an Infosource

I get the following error while trying to change an Infosource. I am not able to get to the change screen and it displays the following message 'Infoobject MPVPOPR not available in the Active Version'.
I did the following to try and debug the issue...but with no luck..
1) I checked for the Infoobject MPVPOPR and did not find it anywhere (Metadata, Transport Connection, Infobjects)
2) I am able to load the data using an infopackage into the ODS.
3) Communication structure and all is Active...
I just cannot get to the Change Screen for this Infosource and it displays the error 'Inobject MPVPOPR not available in the Active Version'.
Please provide any Suggestions
Thanks and Regards
Andy

Andy,
For the confirmation whether your infosource contains MPVPOPR or not.
Just goto RSA1 > InfoObjects > search MPVPOPR > double click on found > there is an option "Where used" , just click and check whether your infoobject is present in the infosource or not.
And let me know for the solution.
Thanks
Ramu

Why am I receiving an error message while trying to change my phone number?

So I have been trying to change my phone number for a few days now and every single time I get this error message, before i even start, "The activity you are trying to perform is currently unavailable. Please try again later." I was hoping to circumvent the 15$ fee of doing it over the phone. Finally, I decided to do an online chat, the associate did not know why the error was occurring but informed me in order to change my number over chat, i would STILL have to pay the 15$ fee. Something struck me as so wrong there, so conveniently the change features and phone number part of the website was not working, however the view/pay your bill part was always working properly, never received any error messages there. I understood it was not the associates fault however. Still that is wrong. If it was not urgent I would wait. Yes I could have tried the number block, that section was not working either, but having to renew which numbers you want blocked every couple of months makes no sense to me, if I want something blocked, i want it blocked permanently not just for 90 days. Yes I tried call/SMS blocker apps from the app store but they're faulty in that they still give you notifications of when the blocked person/number called/text or do not always block everything all the time. But when it came down to it, even the associate encountered the error message while trying to change my number. So why is this happening. Verizon is expensive but the reception is better however theirs always issues when I need to fix something. Its frustrating

Verizon was having a problem on their end, perhaps a server down for some repair or updating. However you were already aware that there was an on-going problem in your own posting and you decided to continue on.I can understand you wanting this done and trying to save the $15.00 fee. However I would have waited a bit longer until the Verizon issue had been corrected. Yes it is frustrating but again you know in advance of a problem , I can understand that this is most upsetting for you but never try to perform any change when a problem is there and I also do not like to do business on a weekend with no live tech support available. I'm sure this will all work out for you if given some time. Sorry.
So I have been trying to change my phone number for a few days now and every single time I get this error message, before i even start, "The activity you are trying to perform is currently unavailable. Please try again later."

C++ exception in upgraded file while trying to change display to Always On

I got the unknown exception while trying to change the display from off to always on of an image.

The patch (EA 2014.1.1) with the fix is live now.
Regards,
Vivekuma
Edge Animate Team

Error while trying to change or save as query in query designer

Hi ,
When we are trying to change or do a save as to a query in the query designer,it is giving us an error stating"'An unexpected object variable or with block variable not set'error occured in wdbrlog 1 error(s) are logged".
We have searched in SDN for the same error and found some OSS notes(Notes 571831,575434) should be implemnted but those notes seem old.We are using BI 7.0 version.
Could anyone please suggest??
Thanks,
Bhagyarekha.

What is your front end SP level ?

Error while trying to change the user password on OSX Lion

Hello,
I am trying to change the user password ( no admin user ) using the webinterface. I enabled the functionality in webservices on the server.
I can loginto the three line password changing form. After I enter the old and two times the new password, I get the information
"Your request could not be completed. The password server may be unavailable."
How can I fix this problem? I also tried https://discussions.apple.com/thread/2485167?start=0&tstart=0.
Thanks in advance for help.

I currently have this error on my 10.6.8 ML server when trying to change password.
In my situation, the message definitely comes from the password policies. As soon as I use a new password that respects minimum complexity (e.g. 8 characters min, 1 lowercase letter, 1 uppercase letter, 1 number), the password changes flawlessly.
It would be nice to change this horrible message to something more meaningful... If someone has any ideas on how to do this, thanks for sharing!

Error while trying to change Material master

Hi ,
I am getting following error when I am trying to Change material master thru Tcode MM02
"Required parameter missing when calling up module MARA_SINGLE_READ"
In fact , I also couldn't select this Material in Purchase order .Error which i am getting is "Faulty Material"
Could anyone pls help me.
Regards
Sandeep marwha

I created a new material also , but for that also I am getting same error.
Regards
Sandeep

Cannot resolve symbol error while trying to define methods in a class

Well, I'm fairly new to java and I'm trying to write a simple program that will take user input for up to 100 die and how many sides they have and will then roll them and output the frequencies of numbers occuring. I have overloaded the constructor for the Die class to reflect different choices the user may have when initializing the Die.
Here is my code:import java.util.*;
import java.io.*;
public class Die
     private final int MIN_FACES = 4;
     private int numFaces;
     private int i = 0;
     private int faceValue;
     private Die currentDie;
     private BufferedReader br = new BufferedReader(new InputStreamReader(System.in));
     private String line = null;
     public Die()
          numFaces = 6;
          faceValue = 1;
     public Die (int faces)
          if (faces < MIN_FACES) {
               numFaces = 6;
               System.out.println ("Minimum number of faces allowed is 6.");
               System.out.println ("Setting faces to 6... . . . . . .   .   .   .");
          else
               numFaces = faces;
          faceValue = 1;
//Returns an array of Die Objects
     public Die (int num_die, int faces)
          numFaces = faces;
          Die[] protoDie = new Die[num_die];
          for (i = 0; i <= num_die-1; i++)
               Die currentDie = new Die(numFaces);
               protoDie = protoDie.initMultiDie(currentDie, i);
     public Die (double num_die)
          int numberOfDie = (int) num_die;
          Die[] protoDie = new Die[numberOfDie];
          System.out.print ("Enter the number of sides for die #" + i);
          for (i=0; i <= protoDie.length; i++) {
          do {
               try {
                    line = br.readLine();
                    numFaces = Integer.parseInt(line);
               catch (NumberFormatException nfe) {
                    System.out.println ("You must enter an integer.");
                    System.out.print ("Setting number of dice to 0, please reenter: ");
               if (numFaces < 0) {
                    System.out.println ("The number of sides must be positive.");
                    numFaces *= -1;
                    System.out.println ("Number of sides is: " + numFaces);
               else
                  if (numFaces = 0) {
                    System.out.println ("Zero dice is no fun. =[");
                    System.out.print ("Please reenter the number of sides: ");
               numFaces = 0;
          while (numFaces == 0);
          Die currentDie = new Die(numFaces);
          protoDie[i] = protoDie.initMultiDie(currentDie, i);
          i = 0;
     public Die[] initMultiDie (Die[] protoDie, Die currentDie, int i)
          protoDie[i] = currentDie;
          return protoDie;
     public Die reInit (int sides)
          currentDie.roll();
          return currentDie;
     public int roll()
          faceValue = (int) (Math.random() * numFaces) + 1;
          return faceValue;
}When I compile I get 2 errors at lines 42 and 73 saying:
Cannot resolve symbol | symbol: method initMultiDie(Die, int) | location: class Die[] | protoDie[i] = protoDie.initMultiDie(currentDie, i)
I've tried mixing things up with invoking the method, such as including protoDie in the parameter liist, instead of invoking the initMultiDie method thru the protoDie Die[] object. I'm a little confused as to what I can and cannot do with defining arrays of Objects like Die. Thank you for any input you may be able to provide.
~Lije

I may as well just replace Die with Dice and allow
Dice to represent a collection of 1 die.. I just like
to cut on bloat and make my programs be as efficient
as possible.Efficiency and avoiding code bloat are good goals, but you don't necessarily achieve it by creating the smallest number of classes. If you have N algorithms in M lines, then you have that many, regardless of whether they're in one class or two. A really long source file can be a worse example of bloat than two source files of half the size -- it can be harder to read, less clear in the design, and thus with more bugs...
The important thing is clarity and a strong design.
The weird thing is, that initMultiDie is
what seems to be throwing up the error, but I don't
see why. Meh, I'm sure I'll figure it out.Refactoring a class to make the design more transparent often helps you figure out bugs.

Validation error while trying to change a value in a request scope bean

- JBoss 4.2.3.GA
- JSF 1.2_09-b01-BETA1 (Mojarra)
- Java 5 Update 17
Hello, everybody!
I'm having the following problem in my JSF web application:
I have a request scope backing bean. The first time this bean is loaded (I check
this with the ResponseStateManager.isPostBack() method) I fill a list of SelectItem
instances that are to be displayed in the JSF page in a +<h:selectOneMenu>+ component.
The list goes, of course, to the +<h:selectOneMenu>+'s +<f:selectItems>+ facet child
component. In the constructor I also define the value that goes to the value property
of the +<h:selectOneMenu>+ component. This value is a property in the backing bean, as
is the list of SelectItem instances. Until now we have something like this:
The backing bean declaration in faces-config.xml:
<managed-bean>
    <managed-bean-name>solicitacaoGeral</managed-bean-name>
    <managed-bean-class>br.urca.solicitacoes.web.PaginaSolicitacaoGeral</managed-bean-class>
    <managed-bean-scope>request</managed-bean-scope>
</managed-bean>
The relevant parts of the JSF page:
<h:form id="form">
    <h:selectOneMenu value="#{solicitacaoGeral.setorOrigem}" id="foco">
        <f:selectItems value="#{solicitacaoGeral.setoresOrigem}" />
    </h:selectOneMenu>
</h:form>
The relevant parts of the backing bean class:
public class PaginaSolicitacaoGeral
    private final List<SelectItem> fSetoresOrigem = new ArrayList<SelectItem>();
    private Setor fSetorOrigem;
    public PaginaSolicitacaoGeral()
        if (primeiraExibicao()) // First load (!ResponseStateManager.isPostBack())
            // Fill fSetoresOrigem...
            fSetorOrigem = ...
        else // Page submitted
            // Read below...
    public List<SelectItem> getSetoresOrigem()
        return fSetoresOrigem;
    public Setor getSetorOrigem()
        return fSetorOrigem;
    public void setSetorOrigem(Setor setorOrigem)
        fSetorOrigem = setorOrigem;
    private boolean primeiraExibicao()
        String idFerramentaExibicao =
            FacesContext.getCurrentInstance().getViewRoot().getRenderKitId();
        ResponseStateManager gerenciadorEstadoResposta =
            RenderKitUtils.getResponseStateManager(
            FacesContext.getCurrentInstance(), idFerramentaExibicao);
        return !gerenciadorEstadoResposta.isPostback(
            FacesContext.getCurrentInstance());
}But when the user submits the form and the bean constructor is called again
(this time the method ResponseStateManager.isPostBack() returns true ),
in the else block in the constructor above, I need to fill fSetoresOrigem with
other values and also the fSetorOrigem field because, of course, the fSetorOrigem
field has to be a valid value that exists in the new fSetoresOrigem list.
JSF is not complaining about the change to the list items, but it is complaining
to the change to the fSetorOrigem field (the list value), even though it is a
valid value present in the list. So I'm getting this error message:
08:23:54,312 INFO [lifecycle] WARNING: FacesMessage(s) have been enqueued, but may not have been displayed.
sourceId=form:foco[severity=(ERROR 2), summary=(form:foco: Validation Error: Value is not valid), detail=(form:foco: Validation Error: Value is not valid)]I suppose that JSF is comparing the new value of the field fSetorOrigem with the value
it has in the view state. As the value is different it is raising the error. That's
what I suppose. But am I not able the change the value in the postback? I've already
checked and the value is valid. It corresponds to a value that exists in the list.
I really need a solution to this problem as I'm stuck with this and can't proceed until
I find a solution to this. What I am doing wrong and how can I solve this?
Thank you very much.
Marcos

BalusC wrote:
It is comparing the selected value against the List<SelectItem> returned by getSetoresOrigem() as it is during the apply request values phase of the form submit request.Ok. That's what I supposed JSF was doing.
BalusC wrote:
If the selected value isn't in there, then you will get this error.I can understand this, but is this right? As I said, the old value isn't really there because I changed the list values to new ones. But the new value (the value of fSetorOrigem ) corresponds to a value that exist in the new list items, so a valid value. So JSF is not considering that I also changed the list, not just the value. It is comparing the new value with the old list, not the new one. Acting like this JSF is making the page looks like a static HTML page, not a dynamic one. If I can't change the list and the value, what's the point of that? In my point of view I'm not doing anything wrong, I'm not violating any JSF rules.
Marcos

Error while trying to change settings in SALE

Hi
I am trying to trigger Idocs from QAS, ECC to XI. There are some problems with the settings.
I went to SALE -.> Logical System --> Define Logical System and reach " Display Logical Systems OverView screen.
Here under the Logical Systems, I don't see the name of the Logical System for XI QAS. I think this entry should be there, then only I can enter it next to Partner number in WE20. Is my understanding correct?
But when I try to add the Logical System name of the XI to the list, I am NOT able to do it. I don't see any option to edit it. The Dispplay- Change option under Table View is greyed out.
How do I change it and add XI system to it?
Regards

Hi,
You have to follow the below steps :
1. ask basis to provide the proper authorization, or let them do that.
2. once done provide the LS name of XI-QAS,
3. Go partner profile and provide your idoc type.
4. go to port and provide the port which will be followed..
5. configure the xi system, using the idx2, idx1 transaction.
7. replicate the structure in xi and configure your xi system.
8. trigger one idoc in ECC QAS and monitor the same in xi system.
Cheers,
jay

Error while trying to change Standalone to Domain Member

Error while writing settings. (Cannot make the server a domain member)
What setting have I got wrong?

Could you by chance post what setting was causing the issue? I am also encountering it and I'm not exactly sure where the error is coming from.

Error while trying to change payment infomation

Hello,
I've tried to update my billing information by adding a new credit card, because the current one has expired, and therefore I cannot make the payment with it.
When I fill out the necessary form and press the button, the window displays a message describing an error with the system. It also displays a link to a support page (http://helpx.stage.adobe.com/hu/contact.html?product=creative-cloud), to which I am denied access.
Does anyone know who I can contact with this issue?
Thanks.

Andy,
For the confirmation whether your infosource contains MPVPOPR or not.
Just goto RSA1 > InfoObjects > search MPVPOPR > double click on found > there is an option "Where used" , just click and check whether your infoobject is present in the infosource or not.
And let me know for the solution.
Thanks
Ramu

Pbm While trying to change Method in BADI

Similar Messages

Maybe you are looking for