PBS viewing poor resolution!

PBS viewing is very poor resolution. AppleTV connected via ethernet. Tested Internet speed while viewing AppleTV 18.16 MB/sec. which tells me it is PBS service. I have also noticed more and more of this with NetFlix

Power cycle the router and ATV.
If the issue persists, and it appears to be PBS, contact PBS.

Similar Messages

ECL Viewer 6.0 - PDF View & Print Resolutions

Hi,
We installed SAPGUI 710 & ECL Viewer 6.0 Patch 4 for all our users.
Settings were made to display PDF through ECL Viewer in DC30.
We observed the following issues while working on PDF
Display quality are not good due to poor resoultion.
Even when we print from ECL Viewer, the quailty is very bad due to the poor resolution.
I have changed the settings to High Definition/Low speed for both Print quality & Preview.
There is some improvement. But, it is not as it is suppose to be.
Are there any other settings to improve the resolution to display & print from ECL Viewer.
Best Regards,
Madhu

We have installed the latest patches for the ECL Viewer and are still experiencing issues with resolution.
When I open a drawing and click on properties, I can see the 2D Loader Preferences for PDF's but cannot change them.
Currently the 2D Viewing Preferences are:
View As: TIFF Group4, Monochrome
Density: 300
The preferences are grayed out and cannot be changed/saved. I currently have PDF's configured to use %EAIweb.webviewer2D.1 %SAP-Control%. I have researched KPRO and SPRO trying to find the config to change the Density from 300 to 1200 to see if this resolves the issue of the drawings opening and printing in low resolution but am unable to find this config.
I may also note I have not set up the MIME types. I have read that this should be done but again I lack understanding how this would be impacting my issue of resolution using the viewer. If I configure SAP to open %auto% the PDF's open with the workstation application Adobe and are clear. BUT this does not support our requirement to complete mark up's within SAP.
Any assistance on this would be appreciated.
Thank You!
Ame B.

Poor resolution connecting my MBP to TV via HDMI. visable vertical lines.

hey!
so I've been googeling around for awhile and it seems A LOT of people have this issue. but I haven't been able to find a solution yet. Story goes... connecting the MBP to the TV via DVI to HDMI gives poor resolution. the weird thing is this only happens every other time. I've tried it on my macbook pro (2007) and another macbook (2010) and it has the same issue with both (but only sometimes). any thoughts?
thanks!
Grant

To Csound's good advice, let me just add that there may be a specific HDMI port on the TV that you must use if you're going to send audio to the TV separately. This should also be explained in the TV's manual.

Unable to view higher resolution pictures in forms

Hi All,
There is an existing custom form, which has a table data block consisting of header_id,BLOB(image) fields.
there are "upload_image" and "remove_image" buttons.
when i press upload button a window opens and i select an image and press OK it is uploaded into into table.
The code is as below
plist := GET_PARAMETER_LIST (:SYSTEM.custom_item_event_parameters);
GET_PARAMETER_ATTR (plist, 'OPENDIALOG', ptype, pvalue);
uploaded_file := pvalue;
v_chr_path :=
SUBSTR (uploaded_file, 0, INSTR (uploaded_file, '\', -1)
- 1);
v_chr_name := INSTR (uploaded_file, '\', -1) + 1;
GET_PARAMETER_ATTR (plist, 'LASTDIR', ptype, pvalue);
set_last_dir (pvalue);
SET_CUSTOM_ITEM_PROPERTY ('FILE_DIALOG', 'GFMAGENT', fnd_web_config.gfm_agent );
gfm_access_id := fnd_gfm.authorize (NULL);
SET_CUSTOM_ITEM_PROPERTY ('FILE_DIALOG', 'ACCESSID', TO_CHAR (gfm_access_id) );
SET_CUSTOM_ITEM_PROPERTY ('FILE_DIALOG', 'UPLOADFILE', TO_CHAR (NULL));
SELECT file_id INTO v_num_file_id FROM fnd_lob_access WHERE access_id = gfm_access_id;
g_num_header_id := :main_block.header_id;
transfer_file ------>database procedure to upload image
(o_errbuf => v_chr_err_buf,
o_retcode => v_num_retcode,
o_num_imag_size => v_num_image_size,
i_num_access_id => gfm_access_id,
i_chr_button => g_chr_button,
i_chr_area => g_chr_area,
i_num_header_id => g_num_header_id
execute query;
transfer_file has query as
EXECUTE IMMEDIATE ' UPDATE '
|| i_chr_area
|| ' SET '
|| i_chr_button
|| '= (SELECT FILE_DATA FROM FND_LOBS FL,
fnd_lob_access FLA
WHERE FLA.access_id = :1
and FLA.file_id =FL.FILE_ID ),
last_update_date = sysdate
WHERE HEADER_ID = :2'
USING i_num_access_id, i_num_header_id;
image are loaded to database table
I am able to view images of resolution less than 720X600 (approx) in front end.
But I am unable to view higher resolution images.
Can Some one help me how can i View higher resolution images?

Forms version?
Have you read the Restrictions in Form Builder help under READ_Image Built-in?
Cheers,

I have a desktop iMac,within a yr old, I had iPhoto 9,downloaded to iPhoto 11, now lost my export to Shutterfly link, & looks like all my photos went to thumbnails, with poor resolution...help!!

I have a desktop iMac OSX 10.6.8, had iPhoto 9 & downloading software update to iPhoto 11, (9.1.5??) I can't find the way to reset up the "Export to Shutterfly mode" and it looks like all my previous photos went to a thumbnail size...with now poor resolution. If I would have know my pictures were going to turn into poor quality pictures, I never would have done the software update. Need a real person to talk to. This complicated method is not user friendly.
< Edited By Host >

I strongly recommend that you remove your contact information, especially your phone number, from this public forum.

Poor resolution after importing to iMovie 10

I've just upgraded to iMovie 10 and Mavericks from 9 and my old clips are now displaying with what appears to be a poor resolution. When I watch them in 9 they look much richer.....thoughts?

i am having the same issue. tried "adjust colors" in the video FX and the preview looked great, but application of the effect left the clip unchanged.
did you get any help from another source (since this seems to be without responses)?

Poor resolution on playback of PNG slides

I'm making a video presentation consisting of *.MOD segments and PowerPoint slides that have been converted as 25-90 KB *.PNG slides. I burn the DVD. On playing the DVD on TV, the slides have very poor resolution. What am I doing wrong? Thanks for any help you can give.

Welcome to the forum.
What are the pixel x pixel dimensions of those PNG images. File size does not really mean anything in video.
What is your Project's Frame Size in pixels, say 1920 x 1080?
Exactly how did you convert the PowerPoint "slides" to PNG?
Good luck, and please let us know a bit more.
Hunt

Poor resolution on iPhoto book

I just ordered the large softbound iPhoto Book from Apple and am very disappointed with the poor resolution of the photos. My original files were 1280x960. Is there any way to find out if my photos are being uploaded at the highest possible res? I've read other posts about changing preferences, but haven't been able to figure out how to do that at my end.
Thanks!

Emily:
The easiest way I've found to modify preference files is with Pref Setter. Once you've located and opened the iPhoto preference file do a search for "dpi". Then change the values for the Keys BookTargetImageDIP, BookTargetSmallImageDIP and BookTargetMediumImageDIP to 300. Save and close Pref Setter. That's it.
It's interesting that you found the large book images to be poor. There was another user that received large books from both the east and west coasts. He found the east coast book to be of lower image resolution (greater halftone pattern) than that from the west coast. All of my large size books have come from the west coast and have been very good, with or without the resolution change in the preference file. Not so with the medium size books. There were patterned no matter what resolution was set in the preferences.
Good luck.

I WANT TO UPLOAD A PICTURE FROM MY MACBOOK PRO TO A STORE TO GET A PUZZLE MADE AND WHEN I DO IT SAYS POOR RESOLUTION. CAN I DO ANYTHING TO CHANGE IT

I WANT TO UPLOAD A PICTURE FROM MY MACBOOK PRO TO A STORE TO GET A PUZZLE MADE AND WHEN I DO IT SAYS POOR RESOLUTION. CAN I DO ANYTHING TO CHANGE IT

Yes, on the right side of the U.K. Apple Store homepage there will be an "Education Store." You can get something like 10% off, it seems.

Poor resolution of dektop after nvidia driver update

Hi,
I have a HP Pavilion Media center 8020n PC connected to HP w1907 monitor with optimum resolution of 1440X900 at 60 hz.
The display adapter is Nvidia GE force 7350 LE. It has Windows vista home premium with Intel Core 2 processor.
I recently updated the video driver from nvidia website version 266.58. Right after the download at the first bootup there was a big difference in the screen resolution. The picture is not crisp and sharp like it was before the update.
I have tried to uninstall the new driver, unnstall the old driver and restart in safe mode with the antivirus off but it still gives the same poor resolution with streched out picture.
Any suggestions?

Hi,
Look here for a monitor driver update. Install the driver and reboot. Then check the monitor type in the Device Manager. Now does it indicate the HP 1907 monitor?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Screen turns black and returns with an orange tinted window with poor resolution

Im running on a Presario S6700NX. Windows-xp It has been running proper until about two weeks ago. Nothing has been added or taken from the system. However, lately I've been getting a black screen that last several seconds and when my window reappears however, It's with an orange tint and with very poor resolution. Several seconds later my window reappears with the proper resolution. This happens whether I'm running an application or not and it's continuous. I've searched microsoft knowledge base and I've gotten no response it's as if it's never happened to anyone else. So now I'm trying HP Forum in the hopes that someone out there may have encountered a similar problem or has heard of a simular situation. This is a cry for HELP. Please if anyone out there can help me it would be deeply appreciated. I want to give my thank you beforehand and hope for a response.

xi-berger wrote:
@jck & @awaller well not literally every other time, it occurs randomly. sometimes I can work for like an hour or as long as I want and nothing happens, sometimes after 5 minutes *boom* the screen goes black, except of one column with random pixels, i tried to switch to a different console with ctrl+alt+(F1-F6) but it did not work...
do you know where I have to look for errors? I also tried to reinstall the drivers, but it did not help..
I see something like this on my T420 Thinkpad sometimes. It turns out the backlight is just going out. I'm reluctant to say it's a kernel issue and not hardware - I have vague memories of it happening on Windows 7 as well, but that was years ago ...
It happens on Arch and Debian definitely, and the following fix works on both for me:
Opening a terminal (which I have bound to a key) and running "xset dpms force off", then moving the mouse or something to wake the display again brings it back to light.
Try that the next time it happens and see if it helps. Will at least confirm whether it's the same issue as me or not.

Poor resolution in AirPlay with ATV2?

When using AirPlay to view my MacBook Air (purchased earlier this year), I notice that the screen resolution isn't very good.
Probably a dumb question but because the ATV2 is 720p and the MBAir can output 1080p, is that why I'm seeing the grainy, less smooth computer desktop on my TV?
Mirroring video/audio seems to work fine but when I mirror my desktop is when I notice the poorer quality resolution.

Thanks. I did that already and that's my default setting. It's not fixing the problem. My laptop has direct line of sight to AppleTV and the wifi, too.

Poor resolution from mini-vga to s-video adapter

I recently bought a digital projector to watch movies on at home, and am using my 14"iBook as the video source. It works great when using a vga cable. However, i want to run the cables up through the ceiling and down through the wall to keep them out of sight. I had read that S-video was supposed to be a fairly high resolution method of transmitting the signal, and is also a lot slimmer than vga (and thus easier to snake through the walls.) So I bought a mini vga to s-video/ video adapter and when I hook it up to the projector, the image quality is very poor. Is there a setting that needs to be changed on my iBook to get it to display properly, or something else that I'm missing? I bought the adapter used on ebay, so I'm trying to troubleshoot the problem without buying another adapter only to find out that it still doesn't work. Also, I am running screen spanning doctor, but even if I change to mirror mode, it still looks bad.

Thanks for taking the time to reply, John. That was my suspicion. Guess I'll have to drill giant holes to be able to run the VGA cable. Unless of course I could figure out how to remove/re-attach the connector end. Anyone know if this is possible? Or, is it possible to find a 15' long mini vga? It seems that there ought to be someone out there who could make custom cables for unique situations and needs like mine. What I really need is a box that runs off my ibook that has multiple display outputs so that i don't have to pull cords every time I want to switch from my 22" widescreen to my projector.

Workaround for slow performance and poor resolution with RED R3D files in After Effects CC 2014 (13.0)

http://blogs.adobe.com/aftereffects/2014/06/red-r3d-problems-after-effects-cc-2014-13-0.ht ml
The After Effects team are investigating a bug in After Effects CC 2104 (13.0) where RED (.R3D) files are very slow and the image resolution is poor, about 1/8 sampling.
The following workaround has been reported to solve the problems in some cases:
Save the project.
Choose Edit > Purge > All Memory & Disk Cache.
Please post in this thread about whether or not this workaround helped you.

Intentionally cross-linking threads: this issue was first reported in this thread, which has an ongoing discussion:
AE 2014CC RED R3D files support broken - footages looks bad, everything slow.
The thread you are in now is the comment thread for the blog post. Please post in whichever thread makes more sense for you. I am monitoring both.

On photobucket, I can only view low resolution pictures but with google chrome, I see full size pictures.

When I view pictures on photobucket, whether they're mine or someone else's, I can only see low resolution pictures. I load pictures on photobucket with a resolution of about 900x750 but fire fox only shows them at about 125x125. Google chrome shows full resolution pictures.
This started with the last firefox update, about 1-2 months ago.

Check the image exceptions: Tools > Options > Content: Load Images: Exceptions - See [[Options window - Content panel]]
A way to see which images are blocked is to click the favicon (Site Identification icon) on the left side of the location bar. 
A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info"). 
Open the Media tab of the "Page Info" window. 
Select the first image and scroll down though the list with the Down arrow key. 
If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain. 
See also [[Images or animations do not show]] and http://kb.mozillazine.org/Images_or_animations_do_not_load

PBS viewing poor resolution!

Similar Messages

Maybe you are looking for