PC and xbox 360 connection

Just a simple question really....can I connect my PC to the homehub 1.0 with wired ethernet and my xbox 360 wirelessly to the hub?My PC has no wireless antenna.

yes
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

  • WRT55AG and XBox 360 connectivity issues

    I've had this router for almost 2 years and in the last month I've started developing issues of when I play a game on the XBox 360 I get constant issues with lag and disconnecting errors that make playing any game online impossible, but I never lose connection to XBox Live. This is happening with multiple games including Team Fortress 2, Call of Duty 4, and Halo 3.
    Now before this I would have problems where the router would completely lose connection with my cable modem and I would have to reset everything but then it would be fine. Now I don't lose internet connection (PC is wired into router while 360 is wireless with Microsoft's official Wi-Fi periphial) or XBox Live connection, but any game I try to play is a fruitless endeavor because of lag.
    My ISP is Charter Communication in the St. Louis area, and my connection is 3 down, 256 up. I have done speed tests and I'm getting pretty much those speeds exactly. I have opened the ports to make my NAT open, and the XBox test confirms my NAT is open.
    I'm at the end of my rope, any help would be greatly appreciated.

    Open routers set up page using http://192.168.1.1 ...leave username blank & in  password use admin....
    Click on "application & gaming" tab ...... forward the ports 88 & 3074 for static Ip of X-BOX ....enable the servie & click save settings ....
    USe static Ip ...subnet mask ...gateway & DNS numbers on X-BOX confgiuration
    Do power cycle & see if you arew able to play games online or not...

  • Updated to 7.3.1, PC and Xbox 360 can't connect

    Hey, anyone else having problems getting PCs and Xbox 360s to connect to the AirPort Extreme after the 7.3.1 update? Wired or wireless, my PC (Vista, with and without SP1) and my Xbox 360 (with the official wireless network adapter) won't connect.

    I am in the same boat...
    7.2 worked great... 7.3.1 does not even show in the network list. Also, downgrading it does not fix the issue?!?!?
    - Jay

  • AirPort Extreme and xbox 360

    How do I open NAT on 2013 AirPort Extreme 7.1 for xbox 360 connection?

    Unfortunately, the AirPorts are not listed as Xbox Live-compatible routers ... so there is no guarantee doing this will get Open NAT status for Xbox Live!
    Basically what it comes down to is that although you can get an Internet connection for the Xbox with the AirPorts, you may not get the necessary NAT setting (Moderate or Open) for the Xbox Live! on-line game that you want to play. As such, you basically have two options: 1) Create a DMZ (Apple calls this a Default Host) for the XBox or 2) Configure the AirPort for Port mapping to open the required ports to allow Xbox Live! access ... or 3) Use a compatible router.
    Option 1 - Create a DMZ
    AirPort Utility > Select the AirPort > Edit > Network Options
    Enable default host at: <Enter the IP Address for the XBox>
    Option 2 - Configure Port Mapping
    The following ports must be available for Xbox Live to operate correctly:
    UDP 53
    UDP 88
    UDP 1863
    UDP 3074
    TCP 53
    TCP 80
    TCP 1863
    TCP 3074
    To setup port mapping on an AirPort base station, either connect to the AirPort's wireless network or temporarily connect directly, using an Ethernet cable, to one of the base station's LAN ports, and then use the AirPort Utility, to make these settings:
    1. Reserve a DHCP-provided IP address for the Xbox 360.
    AirPort Utility > Select the AirPort > Edit > Network tab
    Click the "+" (Add) button to enter a DHCP Reservation.
    Description: <enter the desired description of the host device>
    Reserve address by: MAC Address
    MAC Address: <Enter the MAC hardware address of the Xbox or the MAC address of the wireless depending on how you connect the XBox to the network.>
    IPv4 Address: <enter the desired Private IP address you want to assign to the Xbox>
    Click Save.
    2. Setup Port Mapping on the AEBSn.
    While still on the Network tab:
    Click the "+" (Add) button under the Port Settings dialog box.
    Description: <you must enter a description here; it can be anything you want>
    Public UDP Port(s): 53, 88, 1863, 3074
    Public TCP Port(s): 53, 80, 1863, 3074
    Private IP Address: <enter the DHCP Reserved IP address for the Xbox you created earlier>
    Private UDP Port(s): 53, 88, 1863, 3074
    Private TCP Port(s): 53, 80, 1863, 3074
    Click Save
    Click Update and allow the AirPort to restart.

  • Starz Play and Xbox 360

    I am not new to this and I DO know what I'm doing. I have the network set up the way it always has been. Its ethernet, and its going through the switch and Fios router. I recently downloaded Starz Play and it works great on my Desktop, Laptop, but NOT on my 360. I have been streaming Vista MCE to it for months, and it all works GREAT with no network interference of any sort. The application doesnt show my 360 as an available device for it to extend to, so I am stumped. I searched the interwebs already, so any advice is more than appreciated. Thanks!

    From Starz Play FAQ under "Connect to your TV"
    "Connecting Starz Play To Your TV
        Starz Play offers many very simple ways of connecting Starz Play to your TV for your viewing pleasure. For XP MCE and Vista MCE users you can choose to connect your TV to your computer Using the XBOX 360 as an extender.
    It's easy to have room-to-room entertainment throughout your home with a PC running Microsoft Windows XP Media Center Edition 2005 and Xbox 360. All you need are a few components to get things started:
        • A PC running Microsoft Windows XP Media Center Edition 2005 or Vista with MCE
        • An Xbox 360 with the Xbox 360 Wireless Media Adapter
        • A wired or wireless (preferably 802.11a) home network
        • A broadband Internet connection
    With your Media Center PC hooked up to your home network, you're ready to introduce the Xbox 360 to the mix so you can start enjoying your photos, music, movies, and recorded TV in other rooms of your home. You can experience all this in high-definition if you've got a TV or monitor that can deliver it.
    Please Click Here for step by step instructions from Microsoft on connecting XBOX 360 to your PC as a media extended.
    The link then sends you here: http://www.microsoft.com/windowsxp/mediacenter/extender/setup/default.mspx
    Again, any help is appreciated.

  • Intermittent network performance with WRE54G on Vista, and no Xbox 360 connectivity

    I bought a WRE54G this week to help with some network dead spots in my home after moving house.
    So far I've only had no real success - configuration seemed to take a while to work through (by the time I got the WPA PSK worked out) but now I at least have 2 blue lights on the device all the time.
    On my Windows Vista Business laptop (Toshiba Tecra M400 with latest drivers) in my office (a deadspot) I can connect to the network and WirelessMon reports consistent signal strength of 60% with occasional drops to 40%. However although the connection seems to remain constant, connectivity is not. I seem to suffer severe degredation of network connectivity - streamed video will not buffer correctly and times out; connections to my corporate Exchange server are not retained. My guess is that the laptop is doing something like switching between the router WiFi network and the WRE54G network, although i I switch off the WRE54G I lose all network connectivity to my latptop in my office.
    On my xbox 360 (using the Microsoft XBox 360 wireless network adaptor) I am also having problems. Once or twice I have successfully been given an IP address and then failed to get DNS servers. This evening I don't even get an IP address.
    I'm stuck - I've tried a LOT of things and not achieved any luck. Can anyone suggest anything, or do I have a faulty range expander.
    Details below....
    My ADSL router is an SMCWBRA79042 which does support WDS. All the devices in my house worked correctly with this router in my old house before introducing the WRE54G.
    I use WPA PSK, TKIP. However I've also tried to get things working without any security at all, and then adding in security functionality afterwards.
    I have already upgraded the firmware on my WRE54G to the latest version on the linksys web site.
    I have tried using different channels. Initially I was on 8 (it was a free channel in my neighbourhood) but also have tried 11 and am now on 6.
    I have tried changing the beacon to 50 and reducing the RTS and fragmentation thresholds to 2250.

    Hi
         Have u checked the compatibility of manufacturer's of these two devices i.e ADSL Router & Range Expander ( IMP * version No of WRE54G ) .
    Cheers. !

  • Problems with internet sharing/network connection/ethernet and XBOX 360

    So basically I have a sent my Mac Book Pro 13" (Snow Leopard) away to be fixed, and in return I got a loan Mac Book Pro 15" (Lion). In the two weeks my Mac book was away getting fixed I purchased an XBOX 360, because of my location I am unable to use wireless on my XBOX, so instead I connect the loan Mac Book to the XBOX 360 via network cable.
    This worked fine and I could now connect to XBOX Live and be on the Mac Book at the same time.
    So today my Mac Book (13") is returned, I connect everything up exactly the same also changing the settings on internet sharing making sure that it can be used to send the connection to other devices via ethernet.
    But it just wont connect.
    The XBOX doesnt find the connection like it did before, and it also doesnt register on the MAC Book either.
    I've tried different cables, the same cable I used where it worked before.
    I've tried turning of Virus protection.
    Both still at both ends it is not registering a connection, I have used this Mac Book before through a network cable so I dont think there is a problem there, to my knowledge everything is the same as I did on the other Mac Book but this one does work.
    Have you any advice or tips on how to get this to work?
    Thanks for your time.

    What I did to get my network running again (although I still haven't found out why DHCP has stopped working):
    1. Open the Control Panel of the computer that's trying to connect to the network (not the computer sharing the internet connection)
    2. Go to 'Network' panel, and select the AirPort connection
    3. Under the 'TCP/IP' tab, change 'Configure IPv4' pull-down menu from 'Using DHCP' to 'Manually'.
    4. Enter an IP address between 10.0.2.2 and 10.0.2.256 (I randomly chose 10.0.2.40), a Subnet Mask of 255.255.255.0, and enter 10.0.2.1 in the Router box.
    5. Click "Apply now"
    The computer should now be connected to the network, and able to access the internet. If not, you may need to manually enter a DNS server - put '4.2.2.1' (or an IP for a DNS server provided by your ISP) into the 'DNS Servers' box.
    You need to do that process for each computer you're trying to connect to the shared network, making sure you enter a different IP Address for each.

  • E2000 and XBox 360 Wifi Failed Connection

    my new e2000 is connected to the internet and works for the IPAD (wifi) and desktop pc (wired), while our new xbox 360 with built in wifi recognizes the e2000, but wont connect so I can get xbox live.  I spent 2 hours with xbox and cisco support.  the error message continues to tell me there is an internet connection issue.  I've followed all the help online and via phone support and then Cisco wants me to pay $70 for third party assistance to guarantee connection.  It seems that the xbox should require me to enter the e2000 password to connect, but I have yet had a place to prompt me to enter it.  How do I get these two systems to talk?  It's either an xbox setting or a cisco setting that I can't figure out.  Any help will be appreciated.  Do I need to buy the e3000?
    Thanks

    Access the page of your router
    Trigger ports: 3074/53/88/22728/33233
    2869/10280-10284/1900/1024
    Click Applications and Gaming Center Tab
    Click Port Range Trigger
    Ex:
    Application name: xbox1, xbox2
    xbox1--enter port 3074 on all 4 boxes and click enable
    xbox2--enter 10280 on start box and 10284 on end box, same for the other 2 boxes and click enable.
    Enter all number and on the applications boxes and save

  • Please help: connection issues (ATT, Time Capsule and xbox 360 live)

    I am having near constant issues with my home network, so I am hoping to tap in to the collected knowledge of the internets to help sort things out.
    Main issue: daily/hourly internet disconnection. Now, my 360 wireless adaptor can't even see the network. Ugh. Basically, I am hoping someone could give me the "best" configuragtion (ie settings for network, Time Capsule, 360 and/or wireless adaptor) for my current set-up.
    My set up:
    LinkSys modem from ATT (in bridge mode)-->
    Apple Time Capsule (router) -->
    Mad Catz 360 wireless network adaptor -->
    Xbox 360
    I have spent some time looking through the forums but keep running into conflicting recommendations and nothing I have tried so far seems to have helped. Thanks (in advance) for the help.

    So, you must have somehow reconfigured the 2wire to perform as a simple modem, even though it is a full fledged modem/router combination. I've see the 2wire, but never configured one, so I can't offer a lot of help there.
    Was there a particular reason why you configured the 2wire as a bridge when you could have simply configured the TC as a bridge to work with the 2wire? In other words, the 2wire would do the PPPoE service along with DHCP and NAT.
    Maybe you tried it this way and something didn't work?
    We've seen a number of posts from users who are having issues with the TC doing the PPPoE service. I just wonder if you are not betting off letting the 2wire do what the ISP intended it to do.

  • Step by step complete setup for WRT54G ver.6 with Laptop and XBOX 360

    Hello.  I am sorry to post this, I am sure it is a juevenile and redundent question...but I have tried to look for the set up cd (I can find where to download it...though I can find the firmware upgrade or whatever).  My friend at work said it would do all the setup pretty much automatically for me.  
    I somewhat know computers, but you might go ahead and make your replies VERY lamen's terms or I might not be able to follow.  Anyways, what I need, is a step by step/screen by screen directions for a secure network.  I have made a partial attempt at setting it up and it technically works, but I would feel better if I did the steps a-z in order, so I know that it is done correctly.  I also am not totally confident in its security as it is now.  (Also, technically, I did not check the XBOX again after getting the new laptop, I am just assuming it is still working because it was before).
    My problem is I can't seem to find very good directions for setting up the router...I only find partials or confusing directions.
    So here are the things I am trying to connect:
    Liksys WRT54G ver. 6
    Gateway Laptop running Windows Vista
    XBOX 360 - WIRED
    (I had a PC and a laptop, but they both died at the same time and I have only been able to replace the laptop at this point...the PC will come later and not sure at this point if it will be Wired or not).
    I have a cable Modem between the Router and the wall...I didn't look at that for brand/etc...but I can get it ASAP if needed.
    Here are the settings that I have so far:
    Changed the Router Name
    Changed the SSID
    Have DHCP set to 3  (XBOX, PC, Laptop)
    Wireless SSID Broadcast: Disable
    Username and Password changed to my own info
    UPnP: Enable
    I may have changed other things without knowing it.  So like I said, a complete, step by step screen by screen set up would be totally appreciated.  I haven't done anything in the security tab, all that is totally foreign to me, so I am just not broadcasting for now until I can get some help setting things up with you guys.
    And if someone is familiar with the Laptop/XBOX 360 setup, and I need to change any of the settings on the XBOX itself, could you please include that in your directions?  I know that isn't technically what THIS forum is for, but it would sure be helpful to me if you happen to know both parts anyways.
    Thanks a lot (in advance)!

    So all you just need to do is, secure your Wireless Network. Follow the setps bellow and change the settings on your Router.
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    - Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
    NOTE : Passphrase should be more that 8 characters...
    Now see if you can locate your Wireless Network and attempt to connect...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect... 

  • Getting DSL Modem, TimeCapsule, and XBox 360 to play nice

    I just bought a 1TB Time Capsule and pretty much hooked it up without reading the manual by using what seemed like the defaults. Everything seems to be working fine...I've got internet access, my two MacBooks are backing up using Time Machine...my only issue is that XBox 360, which connects wirelessly, is offline, (i.e., it can't connect to XBox Live.)
    I have AT&T DSL internet. I plugged my TC into the Westell DSL Modem and ran the Airport configuration software. Using the default or recommended options, My TC assumed the settings for the wireless server of my Westell Modem. (I selected the "Bridge" setting when I got to that part.) When I was told to turn off the other wireless device (My Westell modem's wireless), I just logged on to the modem and turned off the wireless.
    Everything worked fine...until I went to get on to XBox Live. It fails the connection test on XBox. (Everything else still works great.)
    What do I need to do to get the XBox back up and running? It appears that my Westell is the router, handing out IP addresses, and my TC is just a wireless bridge to my Westell. Why wouldn't it hand an address to the XBox just like is doing for my two MacBooks?
    I still have my HP Color LaserJet hooked up via ethernet to the Westell.
    Is there a better way to hook all this up?

    Maybe I shouldn't have said I have the "default settings". At each step along the initial configuration path, I read the details for each option, and choose the path that would seem to work best in my environment.
    In my initial post that indicated that I chose the "Bridge" route that you recommended, but my XBox 360 is not getting an IP address from my Westell DSL modem. Yet my 2 MacBooks, 1 MacBook Pro, 2 iPhones and 1 iPod touch all seem to get served IP addresses without a hitch.
    There was a was an option about NAT & Something else after "Bridge" was selected. Is there something about that setting that would allow Mac stuff to access my network, but prevent a Microsoft-rigid device like an XBox 360 from gaining access?

  • Internet Routing a limited-access PC to my iMac AND xbox 360

    Hello All,
    I have a company work computer (PC) at home which does not have administrative access, however, I've been able to download software like firefox and save it to my desktop only.
    Next to this PC, I have my iMac. On the other side of the wall, is my tv room with our xbox 360 which is really a powerful online gaming console.
    I have been frustrated in the past in routing an internet connection to be shared with the PC and iMac. And now I'd like to share the internet with the 360 at the same time. I've had to share the internet "cave man" style by unplugging my Comcast Modem, unplug the ethernet connection, reconnect the ethernet from whichever system I want internet on, and then plug in the power.
    I have tried many times to make this work but have been unsuccessful as I think it's tricky to make the PC and iMac work together. The IT people at work say the iMac has it's own IP number and I don't know if that's prevent the network from working. I've been trying to research the "how-to" and came across something about a "DHCP" but I don't even know if that's my issue.
    I'm reluctant in buying an airport router from Apple because it's not 100% refundable if the packaging is open.
    If you can help, please teach me how to do this. A huge thank you in advance.
    Thank you!

    By default most routers do not use the MAC address for distributing connections, but they can be configured to do so. Modern routers' security settings can be configured to allow access only to machines whose MAC addresses have been entered into the Include list. This creates a "private" network only accessible to those whose MAC addresses have been added to the list, and prevents others from gaining access to the network. Used together with passwords and firewalls they provide effective barriers to prevent unwanted access to the network. Using the MAC address is a good way of securing a wireless network from access by users "outside" of the local network.
    The mechanism used to share an internet connection is called NAT (Network Address Translation) that is used to "map" a real IP address (the one received by the modem from the ISP) to multiple devices. The actual assignment of the local IP numbers is usually done by the DHCP server in the router (Dynamic Host Configuration Protocol.) The DHCP server obtains all the IP parameters required by connected devices so they can communicate through the router - the important ones being the Gateway IP, real IP, network mask, and the local IP.
    In theory a router makes it possible for multiple device such as a Mac, a PC, an XBox, and a printer to all connect to a local network and to communicate with each other. I don't use any gaming machines like an XBox, but my home LAN is setup using an Airport Extreme Base Station that is connected to my cable modem and to a high speed network switch. I have three computers, two network printers, and a SlingBox currently connected in the network. The latter connects wireless from an Airport Express. In addition to the devices normally connected there are two other laptops that may connect wirelessly when needed. I have a second Airport Express in the house that is used to help extend the network because my house has plastered walls with metal laths that tend to reduce wireless signal strength.

  • Air port express and Xbox 360

    I use the Airport Express as my wireless router. When I first bought it I just used it for Air Tunes to my outside speakers, no problem. Then I was able to get cable internet and used it to connect to my iMac, no problem. Then my wife bought a laptop, connected to the ApE, no problem. Bought a Vizio Bluray, connected to the ApE, no problem. THEN I got an Xbox 360, the newest one out with the built in wifi, big problem. Nothing I can do will connect it to the ApE. I have tried manually setting the IP, subnetmask, SSID with password and nothing. Any thoughts on this??? Yes, I'm trying to play email wars with Microsoft support, but no help yet.

    One option would be to enable Internet Sharing on the iMac to share the Internet connection to the XBox's Ethernet port.
    To setup for Internet Sharing (Wireless to Wired):
    Enable Software Firewall
    System Preferences > Sharing > Firewall
    o Click Stop to start the software firewall
    Setup the Network
    Cable Modem > (Ethernet cable) > /[Ethernet port] Wireless Internet Router > (wireless) > /[AirPort Card] iMac /[Ethernet port] > (Ethernet cable) > /[Ethernet port] XBox 360
    Setup Port Order
    System Preferences > Network > Show > Network Port Configurations
    o Verify that "AirPort" and "Built-In Ethernet" are enabled.
    o Verify that "AirPort" is at the top of the list, followed by "Built-In Ethernet."
    o Click "Apply Now."
    Configure the Internet Connection
    System Preferences > Network > Show > AirPort > TCP/IP
    o Configure IPv4: Using DHCP
    o Configure IPv6: Automatically or Off
    Enable Internet Sharing
    System Preferences > Sharing > Internet
    o Share your connection from: AirPort
    o To computers using: Built-In Ethernet (checked) (Note: Uncheck all other entries in the list.)
    o Click Start

  • Ps3 and Xbox 360 already asked many times but no solution works

    Hi,
    first of all I'd like to share with all of you my real disappoint for having bought this Airport Extreme Base Station. I really hope that someone at Apple will read my post and come to my house because I would have just a few words to tell them.
    After 4 years of proficuous cooperation my Netgear WI-Fi router left me and I immediately thought to replace it with an Apple product just to be sure that it would have been easy to install and on top of performances.
    I chose the Airport Extreme which is much more expensive than quite all the other same product but I didn't care about it because I would have brang home an excellent product.....or...at least I thought it !
    Once in my room the soap opera began. I'm not a genius but I consider myself a medium skilled user and, in any case, even it is not my real job, I configured many bigger LANs than my personal ones and I never had such kidn of problem.
    I read many posts where people were asking for information because they couldn't connect their Airport Extreme to their PS3 or Xbox 360 but I never had such kind of problem. It really worked immediately and both consoles worked in few moments.
    My REAL problem is that both of them are terribly slow and I can't do anything online. I can't see streming videos, I can't play online and I can't neither play videos that are on a LAN DLNA server !!!!! It takes about 35 seconds to play a video and some times it has to stop for empty buffering reason. This is really unacceptable.
    I tried so many configurations and nothing changed and I also took a look at some guides but they had been written with old firmwares so they are quite unuseful for me.
    After having asked a friend of mine to give me his router (a Netgear ones) for some days I finally made myself sure that the problem is the Airport Extreme.
    It also has a very poor signal because my iPhone has difficulties to keep the connection in areas where my old router worked fully.
    If only I could turn back time I'd never buy it again but now, having spent to useless my money, could you please let me know a working configuration for the latest firmware 7.4.2 ? I tried to use the previous firmware but I have the same problems.
    There is only a wall separating the Airport Extreme from the PS3 and Xbox and both of them get a 100% of signal but I really don't know what to do.
    Thanks for all the help you could provide me.
    Bye.
    Christian

    Sorry but I have no way to measure the actual throughput for any of my devices (I have 2 Xboxes which have the same problem and even my iPhone suffer of a bad connection).
    In any case I really can't understand why the connection is so bad. I can even get in touch with my ISP to ask them if there is some problem with the connection (maybe a coincidence and the Airport Extreme has nothing to do with it ?????) but the facts remain: even my DLNA server and PS3 connection is slow and I can't clearly see the movies I have in my intenal LAN and also the iPhone show a poor connection to the Airport Extreme and it is because of the Extreme for sure.
    I really don't know what to do.

  • Airport Extreme 802.11n and XBox 360 Disonnects

    I've been using the Airport Xtreme 802.11n for about a week now and have been frequently disconnected from Xbox live on my xbox 360. The NAT is open and I'm directly connected to the router via an ethernet cable. I've given the 360 a static IP address and have forwarded ports 88 and 3074. The disconnects have happened both while in the middle of a online game and while I'm just on the Dashboard. Does anyone have any suggestions or is anyone else experiencing this. Please Help! It's extremely frustrating!

    I have been having this problem as well. It says the server timed out, then my AEBS starts flashing yellow. Sometimes it goes back to green on its own, then other times I have to open up the airport setup. Oddly mine happens the same time every night, give or take 5 minutes.
    For more info on my setup: XBOX360 wired to the AEBS, connected to a Motorola modem. At&t DSL is my ISP.
    Any help would be greatly appreciated.

Maybe you are looking for