PC battery is dying up even after shuting down the PC

Hi,
I have observed that my PC battery completes dry's after shutting down the system. Please help.
Regards,
Narin (Personal information removed)

try this, http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00821536

Similar Messages

TS3474 My ipod will not start even after holding down the Sleep/Wake button and the Volume Down button for at least eight seconds. What is my next step?

I have a sixth generation ipod 16gb nano. It will not turn on. I have tried hoding down the power button with the down volumn button without results.
Any other suggestions?

i have the same problem...my ipod is 4th generation?uggghhhhh

I had downloaded the BBm app on my iPhone 5c, but when I went overseas it went into waiting mode and I have not been able to reactivate even after powering off the phone. What to do?

I have a previously downloaded BBM app that shifted into "waiting" when I went to Europe..even after powering down the phone on my return it will not change however the app shows up in my settings and if I link through the internet I can still access BBM is there any other hints to move out of waiting?

I have a previously downloaded BBM app that shifted into "waiting" when I went to Europe..even after powering down the phone on my return it will not change however the app shows up in my settings and if I link through the internet I can still access BBM is there any other hints to move out of waiting?

Is it possible to continue downloading OS X Lion after shutting down the computer?

I am downloading the OS X Lion app on my MacBook Pro and is only at 180mb after an hour. I am downloading this app for free because I recently purchased a MacBook Pro. Is there a way I can continue the download even after shutting down the computer? Will I be charged the next time I try to re-download the app--as in, will the code for downloading the app for free expire?
Thank you SO much!

I downloaded OS X Lion over the period of a day or so and what you have to do is pause the download (for a snow leopard user that should be in your dock) and then shut down your machine. When you boot it back up, you should be able to resume the download by clicking the OS X Lion logo and typing in your Apple ID info and the download should resume at the same spot where it was when you left it.

I forget to charge my MacBook Pro and it turns off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. Sometimes pulling the Battery out fixes it

I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
Mac OS X version 10.6.8

I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
Mac OS X version 10.6.8

Why battery is dying too fast after iso5.01 upgrade

why battery is dying too fast after iso5.01 upgrade, It is dying on an average of 13% every hour and a half, in sleep mode. I've tried hard restart and restore in I tunes, no difference! It got worse after I upgraded to 5.01. This has to fixed If I dont use the phone it will need a full charge by noon.

Do a forum search and try some of the suggestions there before starting a whole new thread about battery issues.

Kernel panic keeps happening even after I did the factory reset. any suggestions ?

kernel panic keeps happening even after I did the factory reset. any suggestions ?

Hi Hallry,
Let's free your device! It's important to have a properly working device. Have you attempted an alternate Hard Reset on the device http://vz.to/19r2DOO? If the alternate Hard Reset does not work, then the device would need to be replaced. How long have you had this device? Any liquid or physical damage to the device? Keep me posted
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest.

Im trying to download the new itunes so i can use my iphone 5 , however , the new itunes requires Mac OS X 10.6.8 or later and i cant seem to install that onto my imac even after searching for the new update (my imac is currently on 10.5.8.

.Im trying to download the new itunes so i can use my iphone 5 , however , the new itunes requires Mac OS X 10.6.8 or later and i cant seem to install that onto my imac even after searching for the new update (my imac is currently on 10.5.8.

You have already seen that you cannot load the new iTunes into your 10.5.8, so as Neil says, you need Snow Leopard (current cost £14). And you'll probably need to update the disc you buy via the combo update, though that is free.
As far as the new iTunes is concerned, there's been a certain amount of grumbling so you may want to study the forums before you update. The main problem has been with album artwork which does not transfer easily.

Hi, download of the trial product (photoshop ele 13) does nt start even after successfully installing the Adobe download assistant successfully. Only .7z file is shown, .exe is nt available. Whn i try to extract .7z file wd 7-Zip error pops up " cannot ex

Hi, download of the trial product (photoshop ele 13) does nt start even after successfully installing the Adobe download assistant successfully. Only .7z file is shown, .exe file is nt visible. Whn i try to extract .7z file wd 7-Zip error pops up " cannot extract **.7z as archive" .I've tried fresh download of adobe photoshop ele 13 but same error occurs.
OS:Windows 8.1
Storage loc for adobe down assistant : C-Program file(x86)-Adobe download assistant-adobe
Storage loc for adobe down assistant: C- Adobe photoshop assistant 13- PhotoshopElements_13_LS25_win64_1. 7z
After this I try to extract ** .7z file but following error occurs :
After this I try to extract ** .7z file but following error occurs
Kindly Help.

Thanks fr revert !
After clicking on the provided link , Above error pops up. I clicked "ok" n allowed download to complete after which same previous error shows up!

Hi When i create the downpayment process in the invoice i get amount as value but my requirement is in percentage even after i select the percentage basis milestone billing please help what can be done

Hi When i create the downpayment process in the invoice i get amount as value but my requirement is in percentage even after i select the percentage basis milestone billing please help what can be done

downpayment percentage , so if i want 50 percent of order value to be paid and when i go to faz type the invoice is created for 0 value that 50 percent of the amount is not getting calculated , where as when i enter in order same as 50 percent in amount it gets calculated in invoice, any help ?

HT2978 my iphone went black and it will not come back even after i held the two bottons for over a min

my iphone went black and it will not come back on even after i held the botons down for a min

Hey dodie67,
Thanks for the question. Sounds like your iPhone stopped responding to buttons, switches, or touchscreen input, so you'd want to go through the troubleshooting steps in the following article and see if that resolves the issue:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Take care,
David

Why does Visual STudio 2012 References keep showing Exclamation mark (which means assembly is missing) even after I specify the exact path?

Our web application at work requires Visual Studio 2012
For one of the projects within the Visual Studio 2012 Web Application Solution, we need the System.Web.Mvc in the References.
I already have the following in the packages folder:
{blah...blah..Visual Studio Solution path..blah}\packages\Microsoft.AspNet.Mvc.5.1.1\lib\net45\System.Web.Mvc.dll
I keep adding it, but the References still shows the Exclamation mark ( which means missing) next to the System.Web.Mvc
Why does it keep showing the Exclamation mark ( which means missing) , even after I specify the exact path to the System.Web.Mvc.dll ?

Hi cslewis33,
Thank you for posting in MSDN forum.
Based on your issue, if you want to add the System.Web.Mvc reference for a web application in VS2012. As far as l know that the System.Web.Mvc dll is default be located like this path:" C:\Program Files (x86)\Microsoft ASP.NET\ASP.NET MVC 4\Assemblies\System.Web.Mvc.dll.
So if you create the web app using c# language, I suggest you can right-click your Reference under the we application -> Add Reference->select the System.Web.Mvc in the Assemblies tab.
If the above suggestion still could not help you, I suggest you can consult this issue directly to the ASP.NET forum:http://forums.asp.net/ , maybe you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Webcam is not working even after I reinstall the system software

My webcam is not working even after I reinstall the system software.
My questions are follows:
Should I bring it to repair or get a external webcam?
At approximately how much would be cost for repair?
Which webcam I should get?
Thank you very much!
Tian

Update, I fixed it although it feels more like a workaround. I had to enable the extension in extension manager. That still left a blank panel, but once I closed and reopened the panel I was prompted to login. Seems that closing and reopening the panel is the fix once it is enabled.

Ever since iOS 7 was installed on my phone it keeps fetching all and any e-mail from my server and it is taking up tp as much as 2.5 GB even after I delete the messages! Now after a complete wipe and restore it is happening all over

ever since iOS 7 was installed on my phone it keeps fetching all and any e-mail from my server and it is taking up tp as much as 2.5 GB even after I delete the messages! Now after a complete wipe and restore it is happening all over again why can't the techs at apple fix this defective program??????????????

ever since iOS 7 was installed on my phone it keeps fetching all and any e-mail from my server and it is taking up tp as much as 2.5 GB even after I delete the messages! Now after a complete wipe and restore it is happening all over again why can't the techs at apple fix this defective program??????????????

PC battery is dying up even after shuting down the PC

Similar Messages

Maybe you are looking for