Pc-cam 900 vista x64 driver

I need vista x64 driver for my pc-cam 900

I have same problem with Mandaraku who posted 04-20-08. Please help me too.
I have a Camara PC CAM 900 since 2005. It lost the software installation. I can not download on the site CREATIVE. Urgently need to install this chamber in my new computer. How do I get to download installation of this driver? I use Windows XP.

Similar Messages

Vista X64 Drive Management Snap-In Error with SD Cards

I have someone with an W700, 2752-3KG, running Vista X64, raid 1 configuration with factory image. The system also has a VM with XPP X86 in case it proves relevant.
Everything works like a dream, except for one thing which has got us completely stumped. When an SD card is inserted it is recognized as new hardware as expected. There is no autorun, i.e. Open folder / play music window, as this was disabled when the VM was set up. In drive management the SD card will be shown, but alas not assigned a drive letter. Any attempt to assign a drive letter results in the following message; (translated from German to English using translate.google.com)
"The operation could not be completed because the view
of the Disk Management snap-ins is not current. Refresh your view with the
update task. If the problem persists, close the Disk Management snap-in, and
then restart the Disk Management snap-in or the computer."
[Original screenshot attached 203KB]
The usual routine of updating / rolling back of drivers, uninstalling the hardware etc. etc has been tried to no avail.
The SD cards work fine on other TPs including W700s with Vista X64, X86 and XPP X86, they also work fine on this system when using an USB card reader
What hasn't been tried is running a recovery to another hdd. As the system is used daily this would mean blowing part of a weekend. And if a weekend is going to be partly blown, then I'd rather blow it completely and reinstall everything from scratch which would be a shame because, as previously stated, everything else is running 110%.
Has anyone experienced similar? Any ideas? I've searched MS thoroughly without finding anything
Thanks in advance
Edit; Typo
Message Edited by andyP on 04-20-2009 10:10 PM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog
Attachments:
snapinerror.jpg ‏204 KB

You may want to try a few different SD cards, there are apparently some which do not play well with Vista.
Personally I haven't had any issues with a 2GB SanDisk SD card running as ReadyBoost in an X61 under Vista Ultimate x64.
Cheers,
Bill
I don't work for Lenovo

PROBLEM RESOLVED: SATA RAID Vista x64 Driver Errors on P45 Platinum

I have installed 5 WD 640GB SATA drives on my P45 Platinum PC build. Using the Intel Matrix Storage BIOS program, I configured them as RAID 0 (480 GB) and RAID 5 (2 TB) volumes.
Now I am trying to install Vista (x64)--as expected, the Windows installer prompts me for a RAID driver floppy. I have downloaded the latest ICH10R drivers from the MSI Website and copied them to a USB key--the installer detects the drivers on the key but when I click Next, I get the following error message: "No new devices could be found. make sure the driver files are correct and loaded on the driver installation media."
Can anybody help--I'm fresh out of ideas?
The P45 Platinum board is a rev 1.1. I have not flashed the BIOS so I suspect that it is v1.0 but am not sure how to confirm this.

Quote from: Jack the Newbie on 30-October-08, 17:39:54
When one of the board's controllers is set to RAID mode, it does not even matter if there are actually hard drivers connected to it, or not. Vista is not attempting to locate a RAID volume but simply needs proper drivers to be able to initialize the controller.
OK, makes sense. So when Vista was prompting me for drivers it was actually looking for the JMicron RAID drivers NOT the Intel RAID drivers. When I tried to install the Intel RAID drivers it--naturally--gave an error message.
It seems that it is no longer necessary to install Intel RAID drivers when you install Vista as these are already available to the OS (must be on the DVD).

Satelite A300-1GN and Vista x64 driver support

Hi,
I am (happy?) owner of this model for 2 days.
However it seemes logically that if this notebook can support up to 8GB RAM (i bought with 4GB) there should be possibility to install x64 operating system.
It seems, but it's not like I see. There are no drivers for x64 MS Systems on Toshiba official website to download.
Well, I am able to understand you do not want to support Win XP x64, because this system is getting older.
I can not understand how it's possible that every large company supports Vista x64 for their devices and Toshiba do not.
It seems perverse that you do not deliver suitable drivers and I really can't believe that.
I am wonder and i hope the main reason is that product I own is a new model and the drivers appears soon.
E.g. Satelite A200 has x64 support despite its a lower and weaker model...
I hope we can expect that our doubts will be explaining, and Toshiba will not slight their custommers longer, but will incline to our requests.
If I am mistaking of looking for needed drivers, then want to apologize for my post,
but if I am not wrong I will be satisfied to hear rational answer and ensure that the drivers will comming soon!
regards
Kuba

Well I really hope it will be.
Mabye can you tell me how long does it usually take to support the drivers for 64bit systems for new model by toshiba?
If I will have to wait e.g. 2 years there will be no sense to wait for them. If does it usually take about few months I will be waiting carefully.
Or mabye somebody can give me advice if there is a sense trying to find needed drivers on devics producers sites?
Finally my question is, if models having nearly the same devices and configurations like sat a300-1GN and sat a300-15B are probably using the same drivers?
If there are the same graphic cards the same webcam the same loudspeaker? :)
Is there any sense to try drivers for this devices for sat a200 series?
I am sure i will try to install Vista x64 for few days so i am satisfied for all tips i will get here.
Greetings,
Kuba

State of Vista x64 Driv

I'm getting a new motherboard tomorrow so I'll need to reinstall Windows. ive been using Vista 32 off and on since Feb 07, and after SP and the March 08 Creative drivers it's been good enough for my needs that I haven't needed to boot XP. There are still warts, but no showstoppers for my needs.
If I'm going to reinstall I'd like to go x64. ive got 4GB RAM, and I'd like to be able to use it. I really don't need it since all my programs that matter (games mostly) are still 32 bit. It's mostly because I can and I don't really want to reinstall again soon should a 64 bit capable game I want comes out in the near future. I have no 6 bit stuff that matters, so thats not an issue.
Most of my games use OpenAL, otherwise I'd just use the motherboard sound. I play the Battlefield games, WoW, GRAW, UT, All the Half-Life games, Quake series... you get the idea.
My Question is pretty simple, albeit subjective. How are the Creative drivers for Vista x64. It's an Intel P35 chipset, GeForce 9600GT video, and X-Fi Gamer. Any specific gotchas on the new Beta drivers I understand Cmss3d is an issue, but if thats really the only thing I can probably deal with that for a while assuming it'll be fixed (leap of faith there).
Kind of a vague question, and definately subjective. I'm just fishing for experiences before I reformat. Bonus cookie for anyone running dual-boot x86 and x64 on the same computer with a story.

Ellimist wrote:
vista x64 drivers are far and ahead of 32bit drivers as they have to be signed and they are alot more controlled.
That's just BS. Just because they have to be signed doesn't make them any better.
Ellimist wrote:
I've found as long as all your hardware is recent then theres no issue with x64 os's its when u want weird stuff that you will get problems. the creative drivers are stable
l myself still have problems with the microphone not working in game mode.
Ellimist wrote:
use Daniel_K vista drivers cd if u can as theres some enhancements there. that and they can also be made to do DDL
DDL was removed from the Daniel_K drivers AFAIK.
Ellimist wrote:
nVIDIA drivers are quite stable on x64 i've found and usually the few bugs i've encountered have now all been fixed with the latest release. i never noticed bluescreens in x64 so i can't comment on the nVIDIA drivers causing them.
l often get bluescreens in DX0 games.
Message Edited by heftig on 06-04-2008 06:42 AM

Xboard 61 and Vista x64 driver problems

I cannot install the driver for my Xboard 61 without this happening. I've done the following:
-run as administrator
-changed the integrity setting to "ON" using BCDEDIT
-run driver setup in an unpacked driver application folder
-checked to see that emuumidi.sys is installed in system32 folder
-re-checked to see that the same Xboard works on my extant XP x32 system (and it does)
I'm at a loss for what to do. Emu has email support now and its hasn't provided any answers.
Here is a copy of what happens to my system. Any suggestions are welcome.
"Creative Device Driver Installation Program has stopped working."
Problem signature:
Problem Event Name: APPCRASH
Application Name: ctzapxx.exe
Application Version: 0.81.2.256
Application Timestamp: 45f79285
Fault Module Name: StackHash_0e2d
Fault Module Version: 6.0.6000.16386
Fault Module Timestamp: 4549d372
Exception Code: c0000374
Exception Offset: 00000000000c87b7
OS Version: 6.0.6000.2.0.0.768.2
Locale ID: 1033
Additional Information 1: 0e2d
Additional Information 2: 543715ab55e3b1a278bfe6a23c62098f
Additional Information 3: 714e
Additional Information 4: 4310375efff8b83f31abee24c8585510

Do you have vista service pack 1 installed? That will do it, I think. http://www.microsoft.com/downloads/details.aspx?FamilyId=C21C3978-3B7D-4D64-873B-3C9D26982D7A&displa...
If the link doesn't work, search the microsoft site for update KB936330 (x64 version).
I had many driver problems with all kinds of hardware on my computer with vista x32. I downloaded SP1 (but for x32 version) and all those problems were solved.

Promise T3 SATA RAID controller Vista x64 driver OK for W7 x64?

Before I walk down the path of tears again, or at least roll the dice, has anyone used the Vista 64bit drivers for the Promise T3 controller that comes with the K9A2 Platinum on W7 64 bit? And if so, did they work?
From here: http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1332
Thanks,
Anthony
Specs:
Operating System
MS Windows 7 Ultimate 64-bit
CPU
AMD Phenom X4 9550 28 °C
Agena 65nm Technology
RAM
8.0GB Dual-Channel DDR2 @ 333MHz 5-5-5-13
Motherboard
MICRO-STAR INTERNATIONAL CO.,LTD MS-7376 (CPU 1)
Graphics
Generic PnP Monitor on ATI Radeon HD 3870
ATI Radeon HD 3870 (VISIONTEK) 47 °C
ATI Radeon HD 3870 (VISIONTEK) 47 °C
Hard Drives
1000GB MICRONET FANTOM DRIVE IEEE 1394 SBP2 Device (1394)
749GB ATI 1X2 Mirror/RAID1 SCSI Disk Device (SCSI)
Optical Drives
ATAPI DVD A DH20A4P ATA Device
Audio
High Definition Audio Device

executivetechnology, if you have a problem please start you're own new topic instead or resurrecting an old one from 1 1/2 years ago.
>> Please read and comply with the Forum Rules <<
>> Posting Guide <<

No Vista x64 driver in 7.7.1?

After installing iTunes 7.7.1.11 over my previous version 7.7.01 my iPod touch (Software version 2.0) is no longer recognised and it appears that no drivers are installed. Nothing is improved by doing a clean install. Is it possible to get the drivers from somewhere else as they don't seem to be being installed correctly by the installer. I have used the correct iTunes64 version of the installer.

I found 7.2 at filehippo and everything is working
fine again. Just remember to uninstall 7.3 first.
This works! It doesn't fix 7.3 but you can use all the features of iTunes again! Thanks.
kat sass

Vista x64 drivers for Broadcom BCM4311 wlan and touchpad

Hello!
Where to download a Vista x64 driver for a Broadcom BCM4311 wlan and touchpad for a Lenovo 3000 G410m-mm? A Windows update wlan driver allows a two times slower speed.
Regards,
Dmitry

Try this.
//help will save the world

Webcam Instant Vista x64

When will Vista x64 driver be ready for Webcam Instant? Vista has been in the market for nearly 2 years. It shouldnt be hard to write drivers.

Oh, i see it is a strategy which forces us to throw away one year old product and buy a new one. I am sorry but this strategy wont work on me because i will never ever buy another creative webcam again.
Regards,
Message Edited by viperay on 05-22-2008 10:55 AM

NVIDIA GeForce 8600M GT driver for Vista x64

Hello,
I have an issue with my new MacBook Pro 2.4Ghz 17" that was released on the 5th of June, 2007.
It has NVIDIA GeForce 8600M GT installed on it and I simply cannot find Vista 64 bit drivers for it.
I have tried the latest beta Vista x64 drivers (163.11) downloaded from nVidia's official website. I have tried several previous versions including 100.97 one, which contains drivers for 8600M GT model. But they don't work with me. All the driver installation programs allert the following error and quit:
'The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit'.
I also tried Vista 32-bit drivers for 8600M GT. The driver installation program claims the operation system is wrong and quits.
Anybody has the same issue?
Does a working driver of nVidia GeForce 8600M GT for Vista x64 exist at all?
MacBook Pro 2.4Ghz Windows Vista nVidia GeForce 8600M GT

There was one Apple's presentstion where they boot into Windows Vista. So if you claim you can do it why do you forget about Vista x64 customers? I reckon it is because of Leopard that is coming. But it's not an excuse.
I'm currently working in Vista x64 and everything is fine except one thing, I cannot find a working graphics card driver and it is manufacturer's responsibility to provide it. Apple knew there going to be customers who will install Vista x64 on their computers and they at Apple didn't care about it because I guess it's a lame war between you know who.
So why you don't make everything perfect to attract even more Windows customers but instead you hint that you don't care about Vista x64 as you are getting your own 64-bit OS soon. So now they are forcing me to wait having been announced that I can use Vista. But isn't that kind of lame that it's slightly tardy? Why I should wait for Leopard launch if I was insured that Windows will work on my Macbook Pro? Because Apple claim you can run Windows. And don't say it's not official. Who else if not Apple made it possible to run Windows on Mac.
Don't get me wrong, I'm not trying to insult you. I'm just angry that I cannot find a working driver.
Message was edited by: Melnyk

Creative PC Cam 900 Driver

Hi there
I have a Creative PC-Cam 900 but I lost my driver and now I reinstalled my windows and couldn't find driver in creative support.
please help me to find my driver.
with the best regards

I have same problem with Mandaraku who posted 04-20-08. Please help me too.
I have a Camara PC CAM 900 since 2005. It lost the software installation. I can not download on the site CREATIVE. Urgently need to install this chamber in my new computer. How do I get to download installation of this driver? I use Windows XP.

[Vista x64] Microphone problems with X-Fi and 2.15 drive

Hi guys,?I'm having a problem with the 2.5 drivers on my X-Fi Platinum card, under Vista x64. It seems the microphone inputs (both on the card and on the breakout box) have problems, any recordings stutter and pop rapidly, making any recordings (or voice chat)?quite useless. This issue doesn't occur with the 2.3 drivers. Is there any known solution to this problem yet?My system: e6600 CPU, Asus P5W-DH motherboard (975X chipset), 4GB RAM, 8800GTX, X-Fi Platinum. Thanks.

hey Darkman,
since I never had this problem with installing this software, I cant really tell whats wrong, but you dont need it anyway to use the x-fi.
but you may want to try one thing, since it crashes at 27% something may still be in use, so check your task manager and close everything that has CT in its name. then try reinstalling again. If that still doesnt work, try to empty your temp folder, its located in documents and settings/user you are/local settings/temp
if that still doesnt work, try maybe something stupid, wait a bit longer than usual and keep the install window in the front to watch the process, maybe your pc is just a bit slowed down by other software so it may take longer than normal

GX720 Turbo drive Vista x64 CPU get freezed

I have installed SCM from web side and when I press turbo button, my notebook is freezed and I have to turn it off woth TURNOFF button and hold it.
How can I solve this problem with overclocking button and this function?
I saw that SCM is for 32bit syste. Does anybody have for x64? Thank you for ur answers

Quote from: le_tired on 13-September-09, 23:58:25
Anybody with Vista x64 and without problems of Turbo button/function? reply pls
Just as I posted in this previouse thread - https://forum-en.msi.com/index.php?PHPSESSID=5313fd8a380daf24a643bf3d121efc72&topic=127924.0
I have Vista Home Premium 64 bit installed with no issues. When I hit the turbo button it doesn't freeze. Turbo button lights up & I assume
it's working but I never really run anything in turbo mode.

Webcam NX and Windows Vista x64

To whom who can solve this problem,?I have now been testet the Vista x86 and Vista x64. In the x64 it doesn't install my Creative Webcam NX camera. It just finds it as an "unknown device", but in the x86 version it finds it during install and it works fine. Anyone who can help me out here? Because it seems like there will be no development of specific x64 vista drivers for this products. Thanks in advanced?\Thomas Hansen

I sadly have the same issue. It appears that there will be no x64 driver for the Creative Webcam NX. Due to the lack of support, I plan on purchasing 35?different BRAND of webcams for my new computer lab. Creative has lost my business.

Pc-cam 900 vista x64 driver

Similar Messages

Maybe you are looking for