PC can't recognise blackberry- USER ERROR

Hey guys, just need a quick fix here. when connecting my blackberry to my PC in order to transfer a couple of media files, I accidentally selected don't show me this message again and the no option to connecting my device. As a result of this, I am no longer prompted to connect my device to my computer and it does not appear as a drive. Any help would be muchly appreciated.

shameless self-bump

Similar Messages

Can't download blackberry link Error: 1723

I hope someone here can help me, because blackberry make it impossible to speak to a human being.
I've just spent the past 3 hours trying to download bllackberry link onto my netbook so I can move my contacts over from my Bold to my new Blackberry 10. Have tried to reload software twice and both times it's nearly successful until an error message pops up:
Error 1723
There is a problem with this Windows installer package. A DLL required for this install to complete could not be run. Contact your support personel or purchase vendor. Action RepairRimusbDriverNT.191E2COC_5A62_43E3_B035...
Can anyone tell me what this means in human speak and what I need to do?
Very grateful for any help!

Someone at an O2 shop told me that Blackberry were meant to be updating the software this past weekend and changes would be made to eradicate the bugs. I was told to try downloading again some time this week. I haven't tried yet.
Could someone from Blackberry please help us out with this!? As of the moment, I have a Blackberry 10 which I'm entirely unable to use and have no way of exchanging it, since the trial period has now passed. I feel I've been sold faulty merchandise, and they at least owe me some assistance.

How can I get a user manual for my inherited Blackberry ...

How can I get a user manual for my inherited Blackberry Curve 8330?

Hi and Welcome to the Forums!
Here is a link to the manuals:
http://na.blackberry.com/eng/support/docs/subcategories/?userType=1&category=BlackBerry+Smartphones&...
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error in installing BAM, can not create orabam user

Hi all,
I tried install Oracle BAM and always getting the same problem. Error at creating orabam user.
Any idea?
Afonso

hi all
having same problem
i can cannot create orabam user
my oracle home is set
i have also set my path ahead of oracle home
C:\OracleBAM\ClientForBAM\bin in environmental variable..
i can login into my database as sysdba also
but when screen goes to create ORABAM USER it gives me the error cannot create the user
kindly help pls
CHeers

Can Blackberry users subscribe to published iCal calendar?

I have published an iCal calendar to my MobileMe account. Of course, doing so generates a link which allows Mac/iPhone users to subscribe by clicking the link. PC users can subscribe to it through Outlook by clicking the link, and so forth.
There has to be a way to have BB users to subscribe to the calendar and get updates in real time like iPhone users, isn't there?
Just want to make a calendar available to parents on a sports team... thanks in advance for any advice.

Greetings,
I'm afraid I am not a Blackberry user myself so I can't answer (although perhaps someone else in this forum is a RIM user and will have some additional insight for you).
What I can tell you is:
iCal creates a "webcal" publication on the MobileMe server. Any program / device that supports the webcal standard (iCal, iPhone, iPod, Outlook on Windows, etc.) should be able to subscribe to that link.
Your question really is "Does Blackberry support the webcal standard and if so, how do I add a webcal link to a Blackberry?" That question might be better asked of Blackberry users or RIM, the company that makes Blackberry. As they are the people that use Blackberrys / the company that makes the product, they would know the answer.
Blackberry discussion forum: http://supportforums.blackberry.com/
Blackberry support: http://na.blackberry.com/eng/support/
Hope that is of some use to you.

Please Help: Unknown BlackBerry user-agent

I have been trying to download a mobile program designed just for Blackberrys. The web address begins with http://blackberry.    After I enter the address, I get the following error message:
Unknown blackberry user-agent   Mozilla5.0 (blackberry; U; blackberry 9330;en-US) Apllewebkit/534.1=(khtml, like Gecko) Version/6.0
Can anyone help me? I have been in touch with my mobile carrier and they tell me that its a bad website. I have been in touch with the website programmer who told me nothing is wrong with the link.
Thanks

Hi and welcome to the forums Kreyol!
A couple of places for you to visit: Blackberry 101     Tips & Tricks
You want to contact your provider (T-mobile) and make sure you have THE Blackberry data plan.
Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

How can I have multiple users on iTunes (in order to connect to a shared office iPad)?

How can I have multiple users on iTunes (in order to connect to a shared office iPad)? Currently each of us has our own iTunes account, so I've made an "all office" Apple ID. However, I can't seem to get two different accounts (my personal and the office) to work on my machine. Even when I login as "the office", my personal library is still showing. Additionally, when I try to setup with a first-time use in iTunes, I get an error that I don't meet the minimum age requirement - no matter what birthdate I enter!

The library exists regardless of which user is logged in.
The only way around that is to create different user accounts on the computer.
There is no way to have 20 unique iTunes users access a shared iTunes under a single login on the computer.

How can I get all users associated with my VSO

I see here: https://www.visualstudio.com/en-us/integrate/api/shared/profiles that I can get my profile info from the API, but can I get all users associated with an account?

Hello!
If you want to see all of that in a single mailbox, you can create a Smart Mailbox from the "file" menu in the top left corner of your screen. It's a bit of trial and error before you get the rules correct, perhaps, but that will work.

I'm having trouble loading photos on my I phone 4s and I pod. I don't see the photos tab in Itunes?? Prob user error but wanted to get some help.

I'm having trouble loading photos on my I phone 4s and I pod. I don't see the photos tab in I-tunes? I'm sure its user error but wanted to get some help.

What's the origin of this external drive? It sounds very much like it's a Windows-formatted (NTFS) drive which Macs can't write to. If you can, copy the files off the drive, reformat it as Mac format (using Disk Utility) and copy the files back. If you need to continue writing to it from a Windows PC, you should format it ExFAT in Disk Utility.
Matt

How can I allow network users to use File Sharing on 10.8 Server?

I am in the process of setting up a new OS X 10.8 Server. I have exported/imported the network users from my previous OS X 10.6.8 Server using Workspace Manager. I have re-entered the passwords of the users. I have existing clients running (stil logged in).
I have set up the File Sharing service in Server.app. I have several mount points. I have made the Users mount point available for home directories over AFP.
Now, the system administrator can connect to the server and get access to the file shares. So the basic file sharing system works.
Also: the users on a client can get there password verified (e.g. when unlocking screen protection) by the server. It is just AFP they can't get access to, while the system administrator account (OD /Local on the server) can be used. So, the password in the server is OK too. It seems to be a matter of privileges.
But no network user (OD user in directory /LDAPv3/127.0.0.1 on the server) can get access. Where can I give network users privileges for File Sharing on the server?
I did try to add either the "Open Directory Users" group or a specific user that was imported into com.apple.access_afp. If I do that, there is partial success. I can connect to the server from the client with a user account other than system administrator from the server (but connecting is slow). But Mobile Home Sync does not work:
1:: [13/04/05 16:11:10.379] Scheduling next sync of "HomeSync_Mirror" at 2013-04-05 14:11:20 +0000
1:: [13/04/05 16:11:20.782] ==========================================================
0:: [13/04/05 16:11:20.782] Starting automatic sync of "HomeSync_Mirror".
1:: [13/04/05 16:11:20.786] Peer "network" reports changes since last sync.
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:alias:]: isRemote = NO
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: peer = <SPeer_FS:0x7fd5a5009520> = local, optionalStoreID = (null), peer.storeIDString = *
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: rootPath        = /Users/gerben
1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: storePath       = /Users/gerben/.FileSync/store.filesyncstatetree
1:: [13/04/05 16:11:20.787] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: rootAlias       = {path='/Users/gerben', targetName='gerben', volumeName='Macintosh HD', type=DIR, volumeCreateDate=2010-08-10-12:58:16, targetCreateDate=2011-08-28-18:39:13, parentDirID=37638, nodeID=3003598, filesystemID=0000 ('0000'), signature=0x482b ('H+'), isBootVolume=YES, isAutomounted=NO, isEjectable=NO, hasPersistentFileIDs=YES, mounted=YES, url='file://localhost/'}
0:: [13/04/05 16:11:20.789] -[SPeer_FS _mountServerCallbackShares:status:]: received error 64
0:: [13/04/05 16:11:20.790] EXCEPTION: _mountServerCallbackShares:status: (Host is down) <-[SPeer_FS mountPeerVolumeWithURLString:] (Peer-FS.m:446): "'(-1)' error 64">
0:: [13/04/05 16:11:20.790] USERINFO: {
0:: [13/04/05 16:11:20.790]     NSLocalizedDescription = "Host is down";
0:: [13/04/05 16:11:20.790] }
0:: [13/04/05 16:11:20.790] BACKTRACE: {
0:: [13/04/05 16:11:20.790] ? | 0x105cb79b7
0:: [13/04/05 16:11:20.790] ? | 0x105cbf0e5
0:: [13/04/05 16:11:20.790] ? | 0x105c2c866
0:: [13/04/05 16:11:20.790] ? | 0x105c2babd
0:: [13/04/05 16:11:20.790] ? | 0x105c2acb4
0:: [13/04/05 16:11:20.790] ? | 0x7fff858bb72a
0:: [13/04/05 16:11:20.790] ? | 0x7fff858bb6a2
0:: [13/04/05 16:11:20.790] ? | 0x7fff874cf8bf
0:: [13/04/05 16:11:20.790] ? | 0x7fff874d2b75
0:: [13/04/05 16:11:20.790] }
1:: [13/04/05 16:11:20.790] Peer "network" is unable to sync. (-[SPeer_FS mountPeerVolumeWithURLString:] (Peer-FS.m:446): "'(-1)' error 64")
0:: [13/04/05 16:11:20.790] Peer "network" is unable to sync. Not enough peers will be available to continue syncing.
0:: [13/04/05 16:11:20.790] Aborting sync of "HomeSync_Mirror".
1:: [13/04/05 16:11:20.790] -[SPeer abortSync] "local"
1:: [13/04/05 16:11:20.797] -[SStore_FS setupWithAlias:andRef:] (Store-FS.m:447): unlink('/Users/gerben/.FileSync/.fstemp.QW1Gh-bhvgEhVwmG3.noindex')
0:: [13/04/05 16:11:20.798] EXCEPTION: !IF <-[SPeer(protected) doPrepareForSyncWithResolvedConflicts:] (Peer.m:1149): "'(([self checkAbort]))'">
0:: [13/04/05 16:11:20.798] BACKTRACE: {
0:: [13/04/05 16:11:20.798] ? | 0x105c2bb66
0:: [13/04/05 16:11:20.798] ? | 0x105c2acb4
0:: [13/04/05 16:11:20.798] ? | 0x7fff858bb72a
0:: [13/04/05 16:11:20.798] ? | 0x7fff858bb6a2
0:: [13/04/05 16:11:20.798] ? | 0x7fff874cf8bf
0:: [13/04/05 16:11:20.798] ? | 0x7fff874d2b75
0:: [13/04/05 16:11:20.798] }
1:: [13/04/05 16:11:20.798] -[SStore_FS deleteStateTreeTurdFile] (Store-FS.m:476): unlink('/Users/gerben/.FileSync/store.filesyncstatetree.statetree_dirty')
1:: [13/04/05 16:11:20.798] Peer "local" is unable to sync. (-[SPeer(protected) doPrepareForSyncWithResolvedConflicts:] (Peer.m:1149): "'(([self checkAbort]))'")
0:: [13/04/05 16:11:20.798] Peer "local" is unable to sync. Not enough peers will be available to continue syncing.
1:: [13/04/05 16:11:20.798] EXCEPTION: SFAbortedException <-[SSyncEngine _waitForPeers:] (SyncEngine.m:1922): "'(_abort)'">
1:: [13/04/05 16:11:20.798] -[SSyncEngine threadMain_SyncEngine_sync:]: sync failed with exception "-[SSyncEngine _waitForPeers:] (SyncEngine.m:1922): "'(_abort)'"".
0:: [13/04/05 16:11:21.066] Sync of "HomeSync_Mirror" encountered errors. (_mountServerCallbackShares:status: (Host is down))
0:: [13/04/05 16:11:21.067] Last successful sync completed at 2013-04-04 20:17:15 +0000.
0:: [13/04/05 16:11:21.067] Finished sync of "HomeSync_Mirror".
1:: [13/04/05 16:11:21.067] Scheduling next sync of "HomeSync_Mirror" at 2013-04-05 14:31:21 +0000
1:: [13/04/05 16:11:21.284] 1-pass sync of "HomeSync_Mirror" took 0.02 seconds

Hi Gerben,
Try creating a brand new user, that's not imported and see if that works. Every user/group has a little gear in the Server.app/Users or Groups which allows specific access to specific services, perhaps filesharing is off in that section?
Is your DNS setup properly? Can you verify that clients can see the FQDN of your server?
After setting up the Users folder for mobilehomes, did you check whether the group and the separate users have access to filesharing? I am able to select the correct homefolder /Users and restrict the homefolder size.
Goodluck!
Jeffrey

Why can't two different users use Itunes on the same computer with different log ins

Why can't two different users use Itunes on the same computer with different log ins

Pmorgan5672 wrote:
Why can't two different users use Itunes on the same computer with different log ins
They can, but not at the same time.
If one user left iTunes running, and another user tries to use iTunes from a different Windows user ID, that second user will get an error message. If they really want to use iTunes, they either have to beg the first user to log in and close iTunes, or else they have to restart the computer.
If you are asking the technical reason why, it is something about context switching.

How can I find out user id who has deleted payment order

Issue : After payment run, the required information has been sent as Idoc to the bank. So, we know the payment order number. We observed that another payment run also has picked up this vendor invoice and made payment.
Usually Payment Sent will be marked X until the related information comes in the form of bank statement upload and this amount gets cleared.
We noticed that bank has made two payments for this amount to this vendor on different dates :- a) when the payment order supposed to be paid as per the payment terms and b) when second paymnet run paid the amount [ this time it got paid directly as there is long due amount ].
From SAP APP angle, both the payment run worked fine and also the calcaltion of payment terms as well.
So, we come to conculsion that someone has deleted the payment order from the system. Thats the reason this invoice got picked up by 2nd APP and paid the amount.
Where we could not find the related entry in REGUH/REGUP tables for this payment order and no document changes.
Question: How can I find out user id who has deleted payment order. Appreciate any clue / answer for this issue please.
Thank you
Sri

Hello,
Not sure about deletion logs. =/
Idea:
What if an error occured during the first payment? Have you checked sm13 to check if any update termination occured in the payment program?
Regards,
Renan

Database 'TEST' is already open and can only have one user at a time.

Hi all,
Could some help on this issue as per urgency!
Database 'TEST' is already open and can only have one user at a time.
I also tried this command but having the same error, please let me know how to troubleshoot this issue
Use Master
GO
Select * from master.sys.sysprocesses
Where spid > 50
And dbid=DB_ID (‘StuckDB’)) -- replace with your database name
Thanks

Hi Tony,
sorry got the same error again, it can't allow me sp_who2 as well
I tried above command got the following error
Changes
to the state or options of database ‘TEST’ cannot be made at this time. The database is in single-user mode, and a user is currently connected to it.Msg 5069, Level 16, State 1,

How can I fix this printer error with Samsung SCX-4300 and SCX-4521f on Windows Server 2008 R2?

I have two printers installed on Windows Server 2008 R2 (64-bit):
1. Samsung SCX-4521f
2. Samsung SCX-4300
There are two computers (Windows 7 Professional, 32-Bit) connected to this server that utilise these shared printers.
The drivers installed are as follows:
SCX-4x21_Win7_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7 3.04.96:03 Print Driver 11 Dec, 2009 12.37 MULTI LANGUAGE)
SCX-4300_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) 3.04.95:07 Print Driver Jan 19, 2011 53.07 MULTI LANGUAGE)
After printing documents for some time (within a 24 period) the printers no longer respond to print requests.
On the server opening "Control Panel\Hardware\Devices and Printers" shows the two printers with yellow exclamation marks.
The "SCX-4x21" printer shows the "Status" as "Needs troubleshooting" and "Printer: Error".
The "SCX-4300" printer shows the "Status" as "Needs troubleshooting".
Neither will print a test page.
Searching for new drivers automatically returns saying: "The best driver software for your device is already installed".
The error persists and nothing will print.
When double-clicking on the "SCX-4x21" printer (or going to "Control Panel\Hardware\Devices and Printers\Samsung SCX-4x21 Series") you see the following:
"Printer: Error" and "N document(s) in queue".
Clicking on either of these brings up the print queue and shows a document with the status of "Error - Printing".
As each job with an error is cancelled the next one attempts to print and also displays an error like the last.
Once all the jobs are cleared the printer information says "Printer: Ready".
Sending a "Print Test Page" sends the printer into an error state saying "Printer: Error".
With the "SCX-4300", sending a "Print Test Page" displays a bubble saying: "Toner Empty: Replace Toner".
However, I can't see any specific error messages.
How do I find out what exactly "Needs troubleshooting"?
Please can anyone advise further?

The printer (SCX-4300) has stopped again.
Since it has been stopped I have done your recommendations:
Unticked the "Enable bidirectional support" option under the "Ports" tab in the printer properties.
Set the "Interactive Services Detection" to Automatic and started it.
Unfortunately the printer did not start printing, the print jobs did not restart or delete.
I decided to check the Operational logs that we enabled.
The first job I see goes like this:
Information: Rendering job 41.
Error: The print spooler failed to delete the file C:\Windows\system32\spool\PRINTERS\00041.SHD, error code 0x2. See the event user data for context information.
Information: The print job 41 was sent through the print processor SSE1MPC on printer Samsung SCX-4300 Series, driver Samsung SCX-4300 Series, in the isolation mode 1 (0 - loaded in the spooler, 1 - loaded in shared sandbox, 2 - loaded in isolated
sandbox). Win32 error code returned by the print processor: 0x0.
Information:Printing job 41.
Information:Spooling job 41.
This job actually printed.
Other jobs printed fine with no error.
There are no other errors in the "Operational" log other than the "print spooler failed to delete" error.
Any ideas what to try now?
Update: Unticking the "Enable bidirectional support", clearing the print queue and then trying again seems to have fixed the problem for now.

Can we show some user defined message while cube loading in OBIEE

Hi All,
Currently we are building OBIEE dashboards from Essbase ASO Cube as datasource.
During Essbase Cube loading ,Essbase will "Disable all Administrative Commands".In this mean time,When users are trying to run the dashboards,OBIEE will thorws severe error.
Can we dispaly some user defined message something like "Cube is loading.Please wait...." or any other alternative.
Time taken to load the cube is 1hr.Please suggest
Thanks,
SatyaB

Yes, You can better try replacing the whole OBIEE dashboard with a custom message. Whenver the load happens...you shud trigger or set a flag value to 'Y'. Using guided navigation when Flag value is matched to Y...right a JS to replace the whole dashboard.
[html]
[head]
[script type="text/javascript"]var strStatus="@1";
if(strStatus =='Y')
location.replace('saw.dll?PortalPages&_scid=in6lPJnWWNk&PortalPath=/shared/Framework/_portal/Cube%20Status%20&Page=Cube%20Status');
[script]
[head]
Replace square bracket with curly brackets in above replace code..
BTW, you shud mark the previous post on Implicit fact. Follow https://forums.oracle.com/forums/ann.jspa?annID=939

PC can't recognise blackberry- USER ERROR

Similar Messages

Maybe you are looking for