PC computers do not recognize Ipod touch

All the USB ports are fine and the cable work perfectly. When I plug in my Ipod it shows that its charging but the computers dont do anything. I checked devices and even fiddled with some third party softwares that might be blocking it but nothing is working. my Ipod, Itunes, computer, and antivirus software is all up to date. I tried reseting my Ipod and computer and reinstalling Itunes.

You said " my laptop had updated ".
Just what was updated?

Similar Messages

  • TS1369 After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

    After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

    I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
    Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch.

  • Why windows 8 does not recognize ipod touch model A1367 4th Generation?

    Why window 8 does not recognize ipod touch model A1367 4th generation?  and of course iTunes either.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    (it applies to win 8)
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • ITunes in Windows PC only launches at reboot does not recognize iPod touch

    I have had this problem for sometime, but have lived with it. I have my iPod touch 1G connected to a Windows XP PC for syncing charging etc. If I unplug the iPod touch and use it for a while not connected to the PC and then plug in into the USB port, iTunes does not recognize the touch and I have to do a complete reboot of the windows PC. Is there a work around for this problem?

    iTunes does not recognize the touch and I have to do a complete reboot of the windows PC
    Is windows freezing for you undr those circumstances, or is something a bit different going on? (If you're getting an error message, let us know what it says.)

  • ITunes 9 does not recognize iPod Touch (1st Gen); Vista does -- as a ...

    ...Still Digital Camera, complete with a DCIM folder.
    Upon USB hookup, Vista popups up a new window with the directory My Computer\Apple iPod\ , with the sub-directories of Internal Storage\DCIM. Free space and Used space are both 0 bytes.
    Additionally, the attempt to reset the iPod failed, as Vista claims that recovery mode for the iPod is not supported.

    It says 9.1.1(11) -- and the update check says it's there are no updates for me.
    Looking through the drivers that are associated with the iPod, I get:
    \system32\drivers\WpdMtpDr.dll
    \system32\drivers\WpdUSB.dll
    \system32\drivers\WUDFRd.sys
    \system32\WpdConns.dll
    \system32\WpdMtp.dll
    \system32\WpdMtpUS.dll
    No USBaApl.sys at all.
    An attempt to auto-update the driver and by manually pointing to the \system32\drivers\ directory yields:
    Best driver already installed -- Digital Still Camera
    Without an .inf file to easily associate to the iPod, it's hard to choose which of the device drivers to force the usbaaple.sys to the iPod -- I can't choose .sys files, only .infs.
    Of the device types:
    (Standard MTP-Compliant Device)
    --Kodak DC4800 Zoom Digital Camera
    --Kodak DC4800 Zoom Digital Camera
    --Kodak Digital Camera
    --Kodak Digital Camera
    --MTP Device Version: 6.0.6000.16386 [6/21/2006]
    --MTP Device Version: 6.0.6000.18000 [6/21/2006]
    (Standard MTP-compliant devices)
    --Digital Still Camera *What Vista thinks the iPod is
    --Digital Still Camera
    --MTP Device
    --MTP Device
    --MTP IP Device
    --MTP IP Device
    (Standard Windows Mobile device)
    --Windows Mobile device
    (WPD file system device)
    --Microsoft WPD FileSystem Volume Driver
    Outside of the Kodak drivers, I've no idea which one would be best suited for the iPod, and I suspect none of them will work. I should note, the iTunes did recognize the iPod at some point. Thankfully, I only sync'ed to the iPod instead of maintaining a portion of my library on the iPod Touch (I lost some tracks on an iPod Mini when slipped off the jack and hit the ground, crashing the hard drive); I don't have any photos or videos on it.

  • Itunes will not recognize Ipod Touch

    Ok, so I tried to install Itunes 8 when it first released the other day. I received the BSOD, I ended up reverting back to the last known working configuration for windows. So back to Itunes 7.7.1 or whatever. Plugged my Touch in, and it would not recognize at all. I checked in the hardware config and it seemed that the drivers were not installed for the Ipod. I found out about the HP printer fix, and unplugged my HP printer. I installed Itunes 8, works fine now.
    BUT, I plugged my Ipod Touch in, and I get a new hardware wizard, installs the drivers, and asks what I want to do with it, pull pictures off? It's acting like an external drive. Itunes won't recognize it though, no beeps stating it was connected, just won't recognize it is there.
    Is there anything I can do to fix this?

    The first five of those I actually tried. I should check the services menu, and I uninstalled Itunes, but did not restart afterwards. So when I reinstalled, everything was still there. I will try doing that tonight after work.

  • Reinstalled Itunes for Windows will not recognize ipod touch 3rd generation.

    Itunes for Windows and PC will not recognize my ipod touch 3rd generation.  Also it will not fully charge using a brand new apple brand power adapter and cable. I have already uninstalled all Apple software on PC and reinstalled.  I've tried every step suggested by Apple online iPod touch Troubleshooting Assistant.

    the best thing i think you could do is go to an apple store or uninstall itunes and reinstall it one more time and see what happens

  • Windows will not recognize ipod touch also says it has malfunctioned

    hi
    whenever i plug in my ipod touch i get a message saying that "usb device not recognized, one of the usb drives attached has malfunctioned and windows cannot recognize it"
    i have reinstalled itunes 8.1 twice the second time i reinstalled the apple mobile device service and have restarted my computer
    i need some help!

    Do any of your USB ports work ?
    Is your touch seen when connected to another computer ?

  • ITune 9.1.1 (12) does not recognize iPod Touch

    I tried to add new music onto my iPod touch today, and found that iTunes did not recognize my iPod. I even used three different USB cords to connect. I cannot update to a new version of iTunes because my OS is so old (I am waiting for the summer 2011 release of Lion).
    My iPod turns on when it is plugged in to my computer, but does not charge or initiate iTunes to open. It worked fine one month ago! What can I do to resolve this?

    It says 9.1.1(11) -- and the update check says it's there are no updates for me.
    Looking through the drivers that are associated with the iPod, I get:
    \system32\drivers\WpdMtpDr.dll
    \system32\drivers\WpdUSB.dll
    \system32\drivers\WUDFRd.sys
    \system32\WpdConns.dll
    \system32\WpdMtp.dll
    \system32\WpdMtpUS.dll
    No USBaApl.sys at all.
    An attempt to auto-update the driver and by manually pointing to the \system32\drivers\ directory yields:
    Best driver already installed -- Digital Still Camera
    Without an .inf file to easily associate to the iPod, it's hard to choose which of the device drivers to force the usbaaple.sys to the iPod -- I can't choose .sys files, only .infs.
    Of the device types:
    (Standard MTP-Compliant Device)
    --Kodak DC4800 Zoom Digital Camera
    --Kodak DC4800 Zoom Digital Camera
    --Kodak Digital Camera
    --Kodak Digital Camera
    --MTP Device Version: 6.0.6000.16386 [6/21/2006]
    --MTP Device Version: 6.0.6000.18000 [6/21/2006]
    (Standard MTP-compliant devices)
    --Digital Still Camera *What Vista thinks the iPod is
    --Digital Still Camera
    --MTP Device
    --MTP Device
    --MTP IP Device
    --MTP IP Device
    (Standard Windows Mobile device)
    --Windows Mobile device
    (WPD file system device)
    --Microsoft WPD FileSystem Volume Driver
    Outside of the Kodak drivers, I've no idea which one would be best suited for the iPod, and I suspect none of them will work. I should note, the iTunes did recognize the iPod at some point. Thankfully, I only sync'ed to the iPod instead of maintaining a portion of my library on the iPod Touch (I lost some tracks on an iPod Mini when slipped off the jack and hit the ground, crashing the hard drive); I don't have any photos or videos on it.

  • ITunes does not recognize ipod touch, iTunes does not recognize ipod touch

    Sorry for my english, i have a new ipod touch 4g and i connect to iTunes but it does not recognize it but my computer yes i have windows 7 32bit i install again iTunes and nothing i have in mode DFU my ipod touch what i need to do?

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Windows does not recognize ipod touch

    Windows does not recognzie my iPod Touch.  This happened recently as it was recognized previously.  Any suggestions?

    iOS: Device not recognized in iTunes for Windows

  • After installing Leopard and combo iTunes does not recognize iPod Touch

    Hi, probably this question has been asked somewhere, but I can't find it. Given that after upgrading to Leopard and the combo, my iPod is seen in iTunes, but my iPod Touch does not show up in iTunes. The answer seems to be to reinstall iTunes, if I do that, will the reinstall keep my fine iTunes music library? thanks, e_moma

    Most people in this situation seem to have to re-install iTunes. iTunes the application resides in the Applications folder. Your music resides in ~/Music/iTunes/ and will not be affected by re-installing the application. 
    Of course you have a good back-up on an external drive anyway - right(?)
    regards
    mrtotes

  • Itunes 10.7 for Windows 7 does not recognize iPod touch 4g

    Anyone having the same problem? I have uninstalled and reinstalled several times and still no iPod recognition by iTunes. Although my computer recognizes it as a camera.iTunes says no program is assciated with difxinst64.exe
    Has anyone run into this before?
    Thanks, Mike

    I have the same problem a long time ago.try to change to other usb port and iTunes have a tool to detect the problem go to Help->LaunchDiagnostic. in iTunes this must send you a message with the error or try to close the "difxinst64.exe" service in "task manger"

  • Windows 7 will not recognize ipod touch, but itunes does.

    i've removed iTunes, QuickTime, Apple Software Update, Apple Mobile Device Support, Bonjour,  and Apple Application Support.  then reinstalled itunes 11.0.2.26; restarted computer.  tried diff usb ports, cables.  same issue -- the ipod is NOT recognized in windows, but itunes sees it.
    the ipod works fine on a diff computer running windows XP -- it is recognized in both windows and itunes. a diff ipod has the same issues on this windows 7 computer. so, i don't think it's an ipod issue.  sounds like something in windows 7, but what??? thank you in advance! 
    i am running windows 7 64-bit, if that helps.
    ginny

    Try:
    iOS: Unable to import photos to computer

  • Computer does not recognize ipod touch when connected?

    when I connect the Ipod to the computer in Windows 7, the screen does not show the icon for this device. Can anyone provide an explanation and solution?

    iOS: Device not recognized in iTunes for Windows

Maybe you are looking for

  • How to get line item net price and net value?

    I have using "BAPI_SALESORDER_SIMULATE" to SIMULATE to create SO, the return table ORDER_ITEMS_OUT-NET_VALUE is not equals than created by VA01 . how to get line item net price and net value?

  • Deleted Sales Order tracking

    Hello Gurus, Where can I see the deleted sales order. Is it stored in any table? Regards, Balu

  • SPL screening of external addresses, file format

    Hi GTS experts, We have the SPL compliance Managment module for the screening of our Business Partners. Now, we have a requirement to screen some of the external address, those partners which physically dont exist in our feeder systems. I know that t

  • FormsRx

    The Flash player page does not have a "download" box to click on to download the lasest version, any ideas? Using Windows 7 home premium & IE 10. Thanks!

  • Exception when trying to post to a page

    In NetD we created and submitted a form with JavaScript. The form looked something like this <FORM ACTION=pgXYZ METHOD=POST> <INPUT TYPE=hidden NAME=SPIDERSESSION VALUE=12345> </FORM> So now in Jato, we're trying to do the exact same thing, except th