PC connect to admin console (port 7001) but not soa_server1 (port 8001)

Hello All,
I installed weblogic (11.1.1.4) and SOA suite on an Oracle Linux machine and I can access both the admin server and soa_server1 server from the host machine, but when trying to access from my PC I can only connect to the admin server on port 7001. The soa_server1 connection is refused from my PC.
Is there a setting I need in order to open up port 8001 to workstations other than the host machine?
Thanks,
John

OK, I already found the solution after reading the release notes for fusion middleware.
I has specified the "Listen Address" as the the server name. This restricted access to soa_server1 from the host machine. I fixed this my changing the "Listen Address" to a blank and re-starting soa_server1. Now I can access the SOA server from outside the host machine, as is required for PIP.
John

Similar Messages

No application showing in planning web & can't connect to admin console

Hi,
Planning web screen showing 'No aApplication available" even though I worked with planning application yesterday also and after that I am sure nobody have deleted that application. Also I can't login into essbase admin console as it is showing "cannot connect to administration server" though I have checked in services console that hyperion administration services is running.
One exception I got is shared services is not running. So I started that but after some time automatically went to stopped mode. Then I stopped all the services and restart the server and restart the services sequentially---- no hope. Same problem still there.
Can you please suggest how to solve the aforesaid?
Thanks & Regards.

Hi,
Thanks for your reply. I have tried that but still the same error having in admin console. I have not craeted/modified anything in planning cluster in last some days. The problem is that all services is started properly except 'shared services' service. When I go to start that it is starting and showing started but after some time, automatically stopped. I also tried the following-----
1) Stopped all the other services except OpenLDAP
2) then started the shared services from start-> run-> hyperion-> foundation services-> start shared services
and got the error like---
Driver][Oracle]ORA-12505 Connection refused, the specified SID (xxxxx) was no
recognized by the Oracle server.
Database configuration test failed. Use Configuration Utility to configure the
atabase connectivity
Unable to connect to database. Will try to re-connect after sleeping for 30 sec
nds...
Attempting to connect to database: Retry Count: 1
Unable to connect to database. Will try to re-connect after sleeping for 30 sec
nds...
Don't know what is happening....Any idea about the same? How could the problem be solved?
OR should I reinstall hyperion afresh.....
Regards.

I have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.

i have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.

Try changing the channel in use in case you're getting interference.
If you have WEP enabled on the Internet Sharing it'ss worth disabling it whilst troubleshooting the connectivity issues.
mrtotes

SCVMM service crash when trying to connect with admin console

Hello,
i'm using SCVMM for a while but from the beginning of the year (2010), the vmm service crash when i try to connect with the vmm admin consol .
More in detail:
vmm service is running on serverA. (vmmservice 2.0.3444.0)
Admin console is running on serverA (vmmadmin 2.0.3444.0)
ServerA is running W2008 Sp2
on this serverA, i launch vmm admin console to connect to server localhost:8100.
i get the following erro message
You cannot access Virtual Machine manager server localhost
Contact the virtual machine manager administrator to verify that your account is a mamber of a valid user role and then try the operation again
ID: 1604
And i can see in system log at the same time an error (see detail at the end)
i get the ods log from vmm according to the link i see in an other post http://blogs.technet.com/chengw/archive/2008/05/08/how-to-collect-scvmm-traces.aspx
thanks in advance
Log Name:      System
Source:        Service Control Manager
Date:          05/01/2010 11:44:20
Event ID:      7031
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      PYAQ9G.INETPSA.com
Description:
The Virtual Machine Manager service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 100 milliseconds: Restart the service.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Service Control Manager" Guid="{555908D1-A6D7-4695-8E1E-26931D2012F4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7031</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-01-05T10:44:20.000Z" />
    <EventRecordID>21683</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Computer>PYAQ9G.INETPSA.com</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">Virtual Machine Manager</Data>
    <Data Name="param2">1</Data>
    <Data Name="param3">100</Data>
    <Data Name="param4">1</Data>
    <Data Name="param5">Restart the service</Data>
</EventData>
</Event>

Hi Mike,
I have same kind of
VMM Crashing issue but error looks different.
I have one SCVMM Server ( Win2008 R2 SP1) and to manage 20 host servers with 300 clients and it was running fine since 30 months. Recently I observed
that Virtual Machine manager service is not getting started automatically , due to that SCVMM console is not establishing the connection. If we forced to start the VMM service, then we are able connect the SCVMM console. But every 5 or 10 min console
was disconnecting and restarting the console. We are getting below 2 error codes. Please help me on this.
I have hosted IN-SCVMM1 server on
hyper-v virtual machine with 16GBRAM and 2 Processors.
Error1:
Log Name:      VM Manager
Source:
Virtual Machine Manager
Date:
7/24/2012 12:19:31 PM
Event ID:      1
Task Category: None
Level:
Error
Keywords:      Classic
User:
N/A
Computer:      IN-SCVMM1.ingrnet.com
Description:
System.OverflowException: Failed to convert parameter value from a UInt16 to a Int16. ---> System.OverflowException: Value was either too large or too small for an Int16.
   at System.UInt16.System.IConvertible.ToInt16(IFormatProvider provider)
   at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
   at System.Data.SqlClient.SqlParameter.CoerceValue(Object value, MetaType destinationType)
   --- End of inner exception stack trace ---
   at System.Data.SqlClient.SqlParameter.CoerceValue(Object value, MetaType destinationType)
   at System.Data.SqlClient.SqlParameter.GetCoercedValue()
   at System.Data.SqlClient.SqlParameter.Validate(Int32 index, Boolean isCommandProc)
   at System.Data.SqlClient.SqlCommand.SetUpRPCParameters(_SqlRPC rpc, Int32 startCount, Boolean inSchema, SqlParameterCollection parameters)
   at System.Data.SqlClient.SqlCommand.BuildRPC(Boolean inSchema, SqlParameterCollection parameters, _SqlRPC& rpc)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
   at Microsoft.VirtualManager.DB.Adhc.Host.Update(HostData hostData, SqlContext ctx)
   at Microsoft.VirtualManager.Engine.Adhc.HostDatabaseUpdater.UpdateDatabase()
   at Microsoft.VirtualManager.Engine.Adhc.HostRefresher.UpdateAllInformation(Host host, HostUpdateInformation hostUpdateInfo, Guid taskID)
   at Microsoft.VirtualManager.Engine.Adhc.HostRefresher.RefreshData(HostReference hostRef)
   at Microsoft.VirtualManager.Engine.RefreshDriver`1.RefreshThreadFunction(Object obj)-2146233066
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Virtual Machine Manager" />
    <EventID Qualifiers="0">1</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-07-24T06:49:31.000000000Z" />
    <EventRecordID>4888059</EventRecordID>
    <Channel>VM Manager</Channel>
    <Computer>IN-SCVMM1.ingrnet.com</Computer>
    <Security />
</System>
<EventData>
    <Data>System.OverflowException: Failed to convert parameter value from a UInt16 to a Int16. ---> System.OverflowException: Value was either too large or too small for an Int16.
   at System.UInt16.System.IConvertible.ToInt16(IFormatProvider provider)
   at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
   at System.Data.SqlClient.SqlParameter.CoerceValue(Object value, MetaType destinationType)
   --- End of inner exception stack trace ---
   at System.Data.SqlClient.SqlParameter.CoerceValue(Object value, MetaType destinationType)
   at System.Data.SqlClient.SqlParameter.GetCoercedValue()
   at System.Data.SqlClient.SqlParameter.Validate(Int32 index, Boolean isCommandProc)
   at System.Data.SqlClient.SqlCommand.SetUpRPCParameters(_SqlRPC rpc, Int32 startCount, Boolean inSchema, SqlParameterCollection parameters)
   at System.Data.SqlClient.SqlCommand.BuildRPC(Boolean inSchema, SqlParameterCollection parameters, _SqlRPC& rpc)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
   at Microsoft.VirtualManager.DB.Adhc.Host.Update(HostData hostData, SqlContext ctx)
   at Microsoft.VirtualManager.Engine.Adhc.HostDatabaseUpdater.UpdateDatabase()
   at Microsoft.VirtualManager.Engine.Adhc.HostRefresher.UpdateAllInformation(Host host, HostUpdateInformation hostUpdateInfo, Guid taskID)
   at Microsoft.VirtualManager.Engine.Adhc.HostRefresher.RefreshData(HostReference hostRef)
   at Microsoft.VirtualManager.Engine.RefreshDriver`1.RefreshThreadFunction(Object obj)-2146233066</Data>
    <
Error2 :
Log Name:      System
Source:
Service Control Manager
Date:
7/24/2012 12:19:32 PM
Event ID:      7031
Task Category: None
Level:
Error
Keywords:      Classic
User:
N/A
Computer:      IN-SCVMM1.ingrnet.com
Description:
The Virtual Machine Manager service terminated unexpectedly.
It has done this 1 time(s). The following corrective action will be taken in 100 milliseconds: Restart the service.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7031</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2012-07-24T06:49:32.179030700Z" />
    <EventRecordID>29790</EventRecordID>
    <Correlation />
    <Execution ProcessID="564" ThreadID="5840" />
    <Channel>System</Channel>
    <Computer>IN-SCVMM1.ingrnet.com</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">Virtual Machine Manager</Data>
    <Data Name="param2">1</Data>
    <Data Name="param3">100</Data>
    <Data Name="param4">1</Data>
    <Data Name="param5">Restart the service</Data>
</EventData>
</Event>
Please help on this situation.
Ratnakar.c
Ratnakar

Cannot connect to admin console

After I started the default mydomain , myserver I cannot connect to the console. The user name /password comination does not work. Where does it store the user name , password (which configuraation file)
Please help
Thanks

Nevermind. I didnt realize that I had to start up the admin server.
./fmsmgr adminserver start

Is it possible to connect an iMac to the internet but not to the network?

Hello,
I volunteered to purchase an iMac for our company. This huge company maintains a huge windows-only network environment and IT does not support any macs (nor do they want to have them on the network).
Hence, since we really need this machine to be a mac and not a PC I had to promise to set it up as a stand-alone machine and to get anti-virus protection (as users will be coming in with their jump drives etc). At least for the latter reason (regular updates of virus definitions must be possible) we'd like to have it connected to the internet.
How would I escape the dilemma that as soon as I'd hook it up via ethernet, it would of course get internet but at the same time would see all other machines on the network? (it will sure do so as I had tried it out with some other machine running on the same OS)
Is there a way to configure Snow Leopard to allow for internet but not network access?
Does it make sense at all (for security reasons that is)?
thank you very much,
HD

Is there a way to configure Snow Leopard to allow for internet but not network access?
Well, 'internet' is 'network access' so at one level your question makes no sense.
If, on the other hand, what you want to do is segregate your Mac from the other machines then that's a different issue. There are numerous ways of doing that, but most would involve some level of interaction with the network administrators. Given their ana^H^H^H attitude towards Macs that may be an issue.
The best way would be to setup a separate VLAN for the Mac. This will create a separate logical network within the company network with only this Mac and the network router in it. No PC would see the Mac, and the Mac wouldn't be scarred by seeing all those PCs. This cannot be done without buy-in from the network admins, though.
A step down from that would be to use one PC in the network as a gateway to the rest of the network. The Mac would talk to this PC, and the PC would pass the data out to the rest of the network. This would require admin rights on the PC, though, which you may or may not have (I've seen a lot of corporate networks… :: shudder ::)
The last option would be to setup an entirely separate internet connection for the Mac but there are logistical issues there, too.
My advice: Buy a dozen Krispy Kremes for the network guys and sweet talk them into building you a VLAN.

Airport Express 2nd gen will connect to the internet through LAN but not over wifi?

Interesting issue, I can stream Apple TV connected to the LAN port, send Airplay music to my receiver from my iphone, but cannot access the internet over wifi. So it's not Comcast, it has to be the Airport Express, but not ALL of the Airport Express, just the part that sends the internet signal. Is that even possible? I've restarted reset (hard and soft), re-setup, and unplugged everything 100 times, but to no avail. Any ideas?
Thanks!

Ok, thank you.
I know you already tried a number of resets, but please give the following a try to verify that you can get basic Internet access via a wireless connection to the Express from any of your wireless network clients.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Firefox throws "This Connection is Untrusted" when using hostname, but not when using IP address

I am remotely accessing a website which has iFrame in it. The website uses https, but iFrame tag has "src" pointing to a site using http only. However, when I remotely go to the site, iFrame shows the message below although the ''src" url is http only (there is no SSL certificate) when I use IP address (https://10.10.101.156:8006/apprecovery/admin/Core/Storage) in address bar instead of hostname (https://hostname:8006/apprecovery/admin):
===
This Connection is Untrusted
You have asked Firefox to connect
securely to d37t50w1, but we can't confirm that your connection is secure.
Normally, when you try to connect securely,
sites will present trusted identification to prove that you are
going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to
this site without problems, this error could mean that someone is
trying to impersonate the site, and you shouldn't continue.
d37t50w1 uses an invalid security certificate.
The certificate is not trusted because it is self-signed.
(Error code: sec_error_ca_cert_invalid)
===
Why is it giving this when using hostname but not when IP address is using?

Corrected first para above:
I am remotely accessing a website which has iFrame in it. The website uses https, but iFrame tag has "src" pointing to a site using http only. However, when I remotely go to the site, iFrame shows the message below although the "src" url is http only (there is no SSL certificate) when I use hostname address (https://<hostname>:8006/apprecovery/admin) in address bar. But I dont see the message in iFrame when I instead use IP Address (https://<IP Address>:8006/apprecovery/admin) to go to main website.

1 USB port charge but not recognise my iphone the othe one works fine

Hey guys,
I have MacBook Air 11-inch, Mid 2012
1 USB port just charges my phone but not recgnise it. I tried a flash drive and it didn't recgnise it as well
It was working well but all of a sudden it stopped working
please help

Try resetting the PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone information. If issues persist, your Mac's logic board battery (not a portable Mac's rechargeable battery) may need to be replaced. The logic board battery helps retain NVRAM/PRAM settings when your computer is shut down. You can take your Mac to a Mac Genius or Apple Authorized Service Provider to replace the battery on the logic board.

I was using webrtc connection for a video connect. Firefox works in Mac but not work in windows

I was using our company API tokbox SDK to do the servers test between two machines. I blocked one machine ipfw to test the server connection. However, our server connection works well when we are using two mac firefox browser, but not succeed when we were using one windows and one mac machine.

Oh, I replied in your second question here: https://support.mozilla.org/questions/1001511

I can connect my lexmark printer by usb but not wireless

i can connect my lexmark printer s400 series by usb but not wirelessly any thoughts please

I'm having the same issue. On my MBP 15" OS 10.7.3 the Lexmark printer does not connect to WIFI. It works on the USB connection. In wifi however it will work on the Virtual Box Windows 7 partition.
In my logic this means the printer is properly connected to the wifi (green indicator and working with Virtual Box and Windows 7) The MBP is properly connected to the wifi network as Virtual Box works in the Mac's environment. The printer is present in the System Preferences indicating it is Idle and does have a IP address.
When I do send a document to the printer it just sits in the Que and in System Preferences the status goes to Busy. In the Que it also indicates it is busy until it tmes out and indicate that communication with the printer is a problem.
Thanks for any suggestions.

Able to connect to database from SQL plus but not from Oracle SQL developer

Hi
I have two database editions in my system Oracle XE and Oracle EE. I am able to connect to EE database through SQL plus but not through SQL developer.Please tell me how to do it.
All settings are good.I am able to connect to the database before installing XE.I need both for my work(different projects).
And the default listener started is XE's.Please tell me how to change the default one to EE or tell me how to connect through SQL developer??
Regards
Harsha

I Solved it.
I copied the text from listener.ora for EE
and added it in the other one.
It works after restart.

Connect by prior working in sql but not in forms 10g hierarchical tree

Hello Friends,
I have the following connect by prior example which is working in sql command prompt but not in Forms 10g hierarchical tree item type. Can you please let me know why ?
configuration: Forms 10g patchset 10.1.2.0.2 and oracle 11g database on windows 7
SQL> SELECT 1 InitialState,
2 level Depth,
3 labeller NodeLabel,
4 NULL NodeIcon,
5 to_char(reportno) NodeValue
6 FROM reports where formname = 'billinin.fmx' or reportno > 9999
7 start with reportno > 9999
8 CONNECT BY PRIOR reportno = labelno
9 /
INITIALSTATE DEPTH NODELABEL N NODEVALUE
1 1 FIRST 10000
1 2 report1 UD Label 1
1 2 report2 UD Label 2
1 2 report3 UD Label 3
1 1 SECOND 10001
1 1 THIRD 10002
If I write this command in forms hierarchical tree, then it is working, why not the above code ?
SQL> SELECT 1 InitialState,
2 level Depth,
3 labeller NodeLabel,
4 NULL NodeIcon,
5 to_char(reportno) NodeValue
6 FROM reports
7 start with reportno > 9999
8 CONNECT BY PRIOR reportno = labelno

Thanks Room,
This command worked ! I will put the sample working code here. It will help you to filter the records in a tree in sql command prompt as well as in forms hierarchical tree 10g.
SELECT 1 InitialState,
level Depth,
labeller NodeLabel,
NULL NodeIcon,
to_char(reportno) NodeValue
FROM reports
start with reportno > 9999
CONNECT BY PRIOR reportno = labelno
AND FORMNAME = :reports.testitem

Firewall port open but not accessible

Hi Folks,
I am trying to open port 587 in OSX server 10.3.9. I've gone to 'Firewall --> Settings --> Advanced', clicked on the 'add' key and set up a new port as follows:
Action: allow
Protocol: tcp
Service: other
Source Address: any; Port: 587
Desintation Address: any; Port 587
Interface: other
Doing this will NOT result in port 587 opening. I know it's not open because if I turn the firewall service 'OFF', I can access that port. However, with the service 'ON', I can't get through.
Any help would be most appreciated.
Regards,
Luke

Your rule is too specific.
You're telling the firewall to allow traffic that is coming from port 587 on the remote machine to port 587 on your machine.
AFP connections only use a destination port of 587. The source port could be any available port number on the remote system, and would probably never be less than 1024.
Change the rule so that 'Source address' is 'any' and you should be fine.

Airport extreme will connect to some iPhones and iPads, but not all, and will not connect to MacBooks.

Why will the airport extreme not connect internet to macbook or some iPhones? It will connect to all our iPhone 6's and iPads but not to the MacBooks. The macbook says wi-fi has the self assigned ip address of ___,____,____,___ and will not be able to connect to the internet,

Have you done a full restart of the network in correct order?
Shut down everything.. OFF not standby.
Power on in order.
Modem.. wait 2min
Router.. (Extreme??) wait 2min
Macbook.. Only the Macbook.. do restart anything else yet.
Any luck??
No luck reset the Extreme to factory and redo the setup.. this time use all short names, no spaces and pure alphanumeric. Bonus for names <10 characters.
Use passwords with the same rules.. only can be 8-20 characters.. mixed case and numbers.
Try again with the Macbook..
No luck give explicit details of the setup of the whole network.

PC connect to admin console (port 7001) but not soa_server1 (port 8001)

Similar Messages

Maybe you are looking for