PC connects to the airport but internot does not work.
I have tried many ways. Called Apple, called Dell and their is no way to get internet on my PC Laptop. Every MAC laptop or compuater works perfectly wireless.
PLEASE HELP
Same problem here... my laptop connects to the internet w/o problems, but the airport express is not able to connect to the internet, using the same cable, same cable modem....
Similar Messages
-
I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?
The Mac running Snow Leopard should be able to configure virtually any version of the AirPort Express.
Tell us what steps that you are taking to configure the Express and what happens after each step. -
Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?
Thank you for your response.
I had rebooted the router (several times, actually), to no avail.
I do not know the answer to whether MAC filtering is enabled on the router. Have tried to find info about that, but unsuccessfully. Router is an Arris TG852G, supplied by Comcast. I would be surprised if MAC filtering were the issue, since in addition to the computer, we have successfully connected several other devices to the wifi, namely an iPad, a Android phone and a Kindle Fire - all able to access internet pages through the wifi, and all without a need to add the device to a MAC address whitelist. To add to the mystery, the Comcast tech was able to connect his iPhone 4 to my network and access web pages. He was unable to connect my iPhone, however, after trying for some time.
I seem to recall reading somewhere that an iPhone cannot connect to a wireless "n" router, only "b" or "g". The Arris router is described as a n/g/b compliant router, and as noted the Comcast tech was able to connect his iPhone, so don't know why that would be the issue here.
By the way, my iPhone does connect wirelessly to my network at home. This difficulty is at a second home.
Any other thoughts would be appreciated. -
" help me please" I have Windows 7 32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
I have to boot with a Windows
When I use the Mac operating system not have a problem and DisplayPort to VGA Adapter Working properly
why does not work with windows ?
What should I do؟
I'm grateful to give advice
tanks
[email protected]Someone in another section answered this. Thanks.
-
I just installed this update and now I cannot access "Mail" at all. I tried reinstalling the program, but that does not work, either. Help!
Paldeng, thanks for the suggestion. I've done all that. I can connect to the server, but apparently they are not recognizing my ID and password. I can use the server program if I don't go through Mail (using the same ID and password). My mother in another state with another provider has had the same email issue, as also my husband on his laptop who uses the same internet connection I do. His worked fine until we had it repaired at the Apple store and all the original programs reloaded (with the required updates, I assume). We can receive email in Mail, we just cannot send.
I contacted my service provider, and we went over my connections. They said it was not their problem and connected me with Apple, resulting in a charge to me because my warranty is long expired. Apple swears it is not their problem, it is the provider, so here I sit. My son was able to fix my Mom's Mail (she's 97) and got my husband's working also, until mine went out, by tweaking connection descriptions and ports remotely. The thing is, we had not messed with any of those settings, so what changed? I just did not want to bother my son again, as he has many other demands on his time.
Since this fiasco with the Mail v4.6 update, I'm wondering if something else was updated that works well with Lion and Mountain Lion, but does not work well with Snow Leopard and Leopard. I think the problem I had with the Mail update was that my Mail program had been renamed to Mail (original), and therefore was not being recognized by the update. Perhaps they had another tweak in there somewhere that is affecting outgoing mail connections? -
Hi, I have a MAC (version 10.10.2) and installed Creative Suite one year ago. Now I want to open the Illustrator, but it does not work. It says I should install old Java SE 6-Runtime-Version to open „Adobe Illustrator CS6“. Where can I find it? Thanks for your answer! Jana
Prompted to install Java SE 6 Runtime | Mac OS 10.9
Mylenium -
Since updating iPhoto it has ceased to open. I have tried to Hold down the Command and Option keys on the keyboard which is the suggested solution to then open a suggested solution to rebuild the library, but it does not work. iPhoto still does not open. can someone please help?
thank youTry the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
Home/Library/ Preferences folder.
2 - delete iPhoto's cache folder(s):
Home/Library/Containers/com.apple.iPhoto
and, if there is one, the
Home/Library/Caches/com.apple.iPhoto folder
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
Happy Holidays -
I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
Cheers, Tom -
I have an iPod and an Ipad and want to use FaceTime calling from the iPod to the Ipad but it does not work. I use the same iCloud accountedge
Did you set up different email addresses for each device?
iOS: Using FaceTime
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems -
Hi,
My MacBook Pro won't connect to the internet, although it says it is connected. The laptop is about 2 years old and up until now has worked fine. My work PC laptop is connecting to the internet fine so I know it can't be the connection. I've checked for Adware/Malware (just in case) via safemac and that all seems fine.
I'm running OSX 10.8.5.
Any advice would be greatly appreciated.
Many thanks
LizBelieve it or not, that article helped me find a temporary solution. After reading it I realized that the problem did have to do with my DNS settings. I had taken the DNS settings that my ISP gives me when I dial up and plugged them into the configuration for my AirPort card. This apparently caused a problem because, although my wireless network is always on, it's not always connected to the internet. So those DNS settings were invalid most of the time.
I found that as long as I leave the area for DNS servers blank, the computer logs in normally. This further confirms my suspicion that something was trying to access the internet at login. I guess as long as I don't specify any DNS servers, the computer realizes it doesn't have an internet connection through my AirPort card.
So I just created two network locations: one for when my network is connected to the internet and one for when it isn't. In the first, I kept my original DNS settings because they work as long as I have an internet connection. In the second I did not specify any DNS servers. This seems to work fine, but I'd still like to know what is trying to access the internet at login. I've disabled the automatic update feature in all my programs that have it, but that doesn't seem to help the slowdown at login. Does anyone know how I could figure out what program is trying to access the internet? -
[SOLVED]wlan0 connects to wireless network, but internet does not work
I have a Compaq Presario A900 laptop just installed Arch on it, went through the wireless Wiki and also checked this thread: http://bbs.archlinux.org/viewtopic.php?id=65467 (similar issue but I don't use any proxy). It has Broadcom card, 4311 Rev 02. I tried both the b43-firmware and broadcom-wl AUR packages and b43 works with my card.
I have tried with the shell to connect but "iwlist wlan0 scan" always returns no results. (Yes, I did try ifconfig eth0 down first as well before bringing wlan0 up). So I have tried wicd and it worked to connect me to my wireless network which uses WPA, and signal shows ~80% strength, however ping google.ca, nothing works as far as connected to the net.
Any output I should show I will if I have forgotten, thanks very much for your help!
Last edited by colbert (2009-05-27 00:40:48)Thanks for your help hokasch, however it was a result of needing to reboot and have proper daemon in rc.conf, and it has been working great last few days Thanks!
-
My Firefox can no longer open new tabs. I click the icon but it does not work. How can I fix this?
The "+" icon that opens new tabs does not open a tab.
With Firefox version 4 and 5, the default setting is ''not'' to ask the question for saving the session. You can get back that behavior by modifying the options as below:<BR><BR>
# In the address bar, type '''about:config''' and press Enter.
# Accept the warning message that appears, you will be taken to a list of options.
# In the '''Filter''' textbox at the top, type '''browser.tabs.warnOnClose'''
# You will be presented with the entry for '''browser.tabs.warnOnClose'''. If its value is set to '''false''', double-click on it to change its value to '''true'''.
# Repeat these steps for options''' browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning''' and set their values to '''true'''. -
About 3 update ago it did the same thing then all of a sudden a new update and it started working again now with the last update it has stopped working again.
Please HelpOk. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
Normal or safe mode still has same result. No startup, no option button and no customize.
Thanks for your help. Got any other suggestions? -
I have a new iMac OS X 10.6.7
With my older computer, I could save my banking online login id, but I can't get it to work on this one. I set the privacy settings as follows: Use custom settings for history
Items checked are:
Remember my browsing history
Remember download history
Remember search & form history
Accept cookies from sites
Keep until they expire.
Nothing else is checked off.it is possible that the file <i>cookies.sqlite</i> that stores the cookies is corrupted.
Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete <b>cookies.sqlite-journal</b> and <b>cookies.txt</b>, if they exist, in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Cookies#Removing_cookies -
I paid for the subscription, but it does not work.
I paid for the subscription with Western Union and It doesn'n work.
Solved!
Go to Solution.alkilic75 wrote:
I paid for subscription,I`ve got mail that my purchase was delivered but on the phone I got message that I need to buy credit to make a call.Can anyone help me about it.Thank you..
Hi,
Your subscription minutes will be reset on the 29th as you initially purchased subscription on the 29th of August: https://secure.skype.com/account/purchase/history/orders
Recurring payment is taken 3 days in advance in order to avoid any last minute delays: https://support.skype.com/en-gb/faq/FA1781/How-can-I-pay-for-a-subscription#5
Andre
If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!
Maybe you are looking for
-
HELP PLEASE - WHATS WRONG WITH THIS CODE
Hi. I get this message coming up when I try to compile the code, run: java.lang.NullPointerException at sumcalculator.SumNumbers.<init>(SumNumbers.java:34) at sumcalculator.SumNumbers.main(SumNumbers.java:93) Exception in thread "main" Java Result: 1
-
how to solve this problem? '' can not activate cellular data network failure'' authenticating PDP from already thank you
-
Dynamically set number-columns-spanned
Hi all, I have a cross tab which has a dynamic number of columns. Each column has a header "Location" (which is determined by the data), but the table also has a master header "Volume" which should span all of the locations. How can I acheive this? I
-
Photos app stuck on 'downloading x of y'
Hi guys, I had to restore my iPhone 4S yesterday, whilst everything seemed fine at first I noticed that in the photos app it shows 9 pictures with the message "Downloading 9 of 63" yet nothing happens, I cant take photos or screenshots as when I do I
-
Custom reports required for bangladesh.
Hi All, What are custom reports normally required for Bangladesh considering their statutory norms? Regds RK.