PC Crash with Labview 7 and windows 2000

Problem:
the PC does reboot without any prompt when a LV 7 vi is running; the reboot seems to occur randomly (no time dependent); sometimes instead of rebooting, the PC switches to the blue screen with the following message:
Stop: 0x0000001E (0xC0000002, 0x80419292, 0x00000000, 0x00000000)
KMODE_EXCEPTION_NOT_HANDLED
Xxx Address 80419292 base at 80400000, date stamp 3EE6C002-ntoskrnl.exe
Starting memory download
Configuration:
Intel Pentium IV - 2.66 GHz - RAM 1 Gbyte - Video chipset Intel 82865G;
OS: Windows 2000
DAQ Board: PCI MIO 16 E1;
Labview 7 express - NIDAQ 7.1
Note:
The VI that causes the reboot uses the DAQMX to generate an Analog Output with analog trigger.

> The VI that causes the reboot uses the DAQMX to generate an Analog
> Output with analog trigger.
You probably want to post this problem to the DAQ message board as well
since LV itself really can't cause either of these problems on a
protected OS. Be sure to be very explicit about what HW boards and what
DaqMX calls you are making along with which version of the driver you have.
Greg McKaskle

Similar Messages

Print text file with labview 2011 and windows 7

I am having some strange problem, hope someone out there knows the solution.
We have a labview program running under windows xp, the program runs some test and print label from a local label printer. Last week, I have to upgrade the computer to windows 7 and all the sudden the printer will not print any more.
The print vi is very simple. I am using the report function and I am attaching the diagram of that vi below.
If I use windows notepad to open that small text file, I can print fine. This means the printer driver itself is OK. However, if I print the same text file through Labview printing vi, from the printer's task list, I can see it does not recognize the char. From the attached png file, the top one is the task from notepad, it shows 2 pages and the bottom one is from the labview, it becomes 33 pages.
For the printer part, I use Generic / Text Only printer driver which comes from windows itself. And I am aslo attaching a sample of the text file, there are quite a lot of special char, it is for print bar code. When I tried to use labview print text vi to print general text from my computer to a regular printer, the vi works. So it seems Labview print can not handle the special char? Although it worked many years under windows XP in the past.
Welcome to any suggestions!
Thanks
Attachments:
print vi.gif ‏9 KB
labview print bug.png ‏26 KB
SerialLabel.txt ‏1 KB

DGU wrote:
where to check RAW or TEXT? the print report vi only asks for file name and printer name.
When I print from notepad, everything just goes by default. This is a label printer, so I never need to specify printing parameter such as size, orientation, etc in the past
Famous last words go something like this: "...never had to do that before." Maybe you have to do that now. It's worth at least comparing the defaults settings for bothe generic drivers. It could save you a lot of headache if you notice something different.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Nokia 6085, PC Suite and Windows 2000

I can't find the PC Suite version that will work with my phone and Windows 2000. Can someone point me to where it is so I can download it please?

Active_Lad wrote:
I have a trusty 6600 (that neither slides nor folds!) but find that I can't use the normal PC Suite that is Win7 compatible; I must use a device-specific version. However, the device specific version doesn't support Windows 7. So I am stuck. Is there a workaround to either force the device-specific version to work on Win7 of get the 6600 to work with the normal PC Suite?
Sure you can. Install in XP compatibility mode as admin.
http://europe.nokia.com/support/product-support/nokia-6600/software/pc-suite#
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Acrobat 3D and Windows 2000

Everyone that has the Windows 2000 operating system has problems with the Acrobat 3D models. The models were created using Windows XP and were tested using Windows XP. I am assuming that Acrobat 3D and Windows 2000 are incompatible. Adobe states Windows 2000 compatibility. Does anyone know why users with Windows 2000 are having problems with my models?
Thanks

Yes, I have checked the version and they have Reader 7.0.8. I also checked that they have the latest version of DirectX. Of course there are a number of remote Windows2000 users, so I haven't the ability to check the service pack installations, graphics drivers, and so on. Many of these users are schedule to be upgraded to new laptops (with Windows XP installed).
I also have the most recent version of Acrobat 3D and have installed all the updates.
It seems the problems are different among different users, but everyone seems to have some type of problem when using Acrobat 3D and Win2000.

Media Sync and Windows 2000

Hello,
I'm using for few days a BlackBerry Curve 8900 with a PC under Windows 2000.
Did anybody kept the installation package for Media Sync V2, which seems to be compatible with Windows 2000 ?
Only the V3 is available on the BlackBerry site.
Thanks !

MMedland wrote:
Hello,
Apparently windows 7 and media sync do not currently work together. What I mean by this is that when installing Blackberry Media Sync I receive a message explaining to me that "an unsupported operating system was detected. The following operating systems are supported: Windows XP Service Pack 2 and Windows Vista." After this, the installation explains that it will now exit without setting up. Is there something that I can do to get around this. I mean obviously I can just remove the SD Card and insert it into my laptop that way to make change but I would much rather be able to make changes to my media through the Desktop Manager.
Thanks for any help in advance.
Hi and welcome to the forums!
You can use a PC to transfer info between the PC and the media card.
Basically you will attach the USB to the BB and the PC. Don't use desktop
manager. Go to "My Computer" on the PC and the BB will show as a flash drive.
Then you can "drag and drop" files to the BB.
Use the following settings in the memory option of the Storm:
Media card support ON
Encryption mode NONE
Media transfer protocol ON (Storm and Bold only)
Mass storage support ON
Auto enable Mass storage support when connected ON
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Yosemite finder crashes with previewig .txt and other files

Hello,
under Yosemite the Finder crashes with previewig .txt and other files.
Is this just my problem? Help please.
Thank you very much.
Regards.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Macbook pro early 2011 - overheat and crash with blue screen and glitches

Hi
since last wednesday my MBP has started to freeze and then crash with bluescreen, glitches and so on...
Most of the time doesnt not restart with any command as is overheating as well.
I did a clean installation on friday night and i am now running mavericks and then again on sunday it start with all the above issue. At the moment i am able to restart only if i reset NVRAM each time, which i do not think is really safe to do it everytime.
i also tried
Macs Fan Control
gfxCardStatus
to fix but they doesn't help.
I read many customers are now experiencing similar problems with this mac as the GPU Amd is faulty.
APPLE SHOULD RECALL AND REPLACE IT or will lose many custumers
I am now waiting to be seen at Genius bar on sunday, however i read about etrecheck in this related post
http:/https://discussions.apple.com/thread/5081857?start=0&tstart=0
and meanwhile i want to hear your opinion...
Looking forward
Hardware Information:
          MacBook Pro (15-inch, Early 2011)
          MacBook Pro - model: MacBookPro8,2
          1 2 GHz Intel Core i7 CPU: 4 cores
          8 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 512 MB
          AMD Radeon HD 6490M - VRAM: 256 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:13:20
Disk Information:
          Hitachi HTS545050B9A302 disk0 : (500,11 GB)
                    EFI (disk0s1) <not mounted>: 209,7 MB
                    Macintosh HD (disk0s2) /: 499,25 GB (455,18 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-898
USB Information:
          Microsoft Microsoft Notebook Receiver v2.0
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [System] com.genieoinnovation.macextension.client.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [System] com.torch.update.agent.plist 3rd-Party support link
Launch Agents:
          [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [System] com.genieoinnovation.macextension.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
User Login Items:
          iTunesHelper
          Macs Fan Control
          gfxCardStatus
          BetterSnapTool
Internet Plug-ins:
          SharePointBrowserPlugin: Version: 14.0.0 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
          None
Bad Fonts:
          None
Old Applications:
          None
Time Machine:
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 464.96 GB Disk used: 41.04 GB
          Destinations:
                    Backup di Time Machine [Local] (Last used)
                    Total size: 297.77 GB
                    Total number of backups: 3
                    Oldest backup: 2014-02-04 20:47:26 +0000
                    Last backup: 2014-02-08 20:21:58 +0000
                    Size of backup disk: Adequate
                              Backup size 297.77 GB > (Disk used 41.04 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
              16%          mds
               3%          WindowServer
               1%          EtreCheck
               0%          MacsFanControl
               0%          SystemUIServer
Top Processes by Memory:
          508 MB          firefox
          106 MB          com.apple.IconServicesAgent
          66 MB          mds_stores
          57 MB          Finder
          57 MB          WindowServer
Virtual Memory Information:
          5.25 GB          Free RAM
          1.25 GB          Active RAM
          395 MB          Inactive RAM
          1.11 GB          Wired RAM
          257 MB          Page-ins
          0 B          Page-outs

Hi, sorry but my mac is early 2011 not 2010...
Hardware Information:
          MacBook Pro (15-inch, Early 2011)
          MacBook Pro - model: MacBookPro8,2
          1 2 GHz Intel Core i7 CPU: 4 cores
          8 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 512 MB
          AMD Radeon HD 6490M - VRAM
i don't have the disable graphic switching options in the energy saving preferences...
i am using mavericks now.
about this VST how can i check or who can check it?
And this last kernel:
Anonymous UUID:
3068FDF2-8835-F87B-3AC0-A00C76A699D9
Sun Feb 9 14:53:24 2014
panic(cpu 2 caller 0xffffff80280dc19e): Kernel trap at 0xffffff7fa9efefc1, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff8148564428, CR3: 0x000000002ac24000, CR4: 0x00000000000606e0
RAX: 0x0000000080000000, RBX: 0x000000000000150a, RCX: 0xffffff815c72bcc0, RDX: 0x000000000000150a
RSP: 0xffffff815c72bc10, RBP: 0xffffff815c72bc30, RSI: 0xffffff814855f000, RDI: 0xffffff803c4b5c00
R8: 0xffffff815c72bcc0, R9: 0xffffff810aa84ce8, R10: 0xffffff815c72b900, R11: 0x0000000000000000
R12: 0x000000000000000f, R13: 0xffffff803b447e00, R14: 0xffffff814855f000, R15: 0xffffff803c4b5c00
RFL: 0x0000000000010206, RIP: 0xffffff7fa9efefc1, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff8148564428, Error code: 0x0000000000000002, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff815c72b8a0 : 0xffffff8028022f69
0xffffff815c72b920 : 0xffffff80280dc19e
0xffffff815c72baf0 : 0xffffff80280f3606
0xffffff815c72bb10 : 0xffffff7fa9efefc1
0xffffff815c72bc30 : 0xffffff7fa9ef835e
0xffffff815c72bc90 : 0xffffff7fa9f0bab6
0xffffff815c72bcb0 : 0xffffff7fa9ebc148
0xffffff815c72bd10 : 0xffffff7fa9ebc189
0xffffff815c72bd30 : 0xffffff7fa9e5b4b1
0xffffff815c72bd60 : 0xffffff7fa9e62a57
0xffffff815c72bd80 : 0xffffff7fa9e6730d
0xffffff815c72bdf0 : 0xffffff7fa9e5f094
0xffffff815c72be10 : 0xffffff7fa9e5d62c
0xffffff815c72be50 : 0xffffff7fa9e5d4b4
0xffffff815c72be90 : 0xffffff7fa9e5c67c
0xffffff815c72beb0 : 0xffffff7fa9e7af5a
0xffffff815c72bef0 : 0xffffff80284ada80
0xffffff815c72bf30 : 0xffffff80284ac522
0xffffff815c72bf80 : 0xffffff80284ac5f7
0xffffff815c72bfb0 : 0xffffff80280d6aa7
Kernel Extensions in backtrace:
com.apple.iokit.IOAcceleratorFamily(98.7.1)[024BF8EC-2925-3C4B-ADBB-CFE36F7D41C5 ]@0xffffff7fa9e53000->0xffffff7fa9eabfff
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7fa86ba000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7fa8ed7000
com.apple.AMDRadeonX3000(1.1.4)[4333F950-8969-31AB-93E2-DF7D2DE76A9F]@0xffffff7f a9eb8000->0xffffff7faa258fff
dependency: com.apple.iokit.IOAcceleratorFamily(98.7.1)[024BF8EC-2925-3C4B-ADBB-CFE36F7D41C 5]@0xffffff7fa9e53000
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7fa86ba000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7fa8ed7000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:
0x0000000027e00000
Kernel text base: 0xffffff8028000000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 19122777411521
last loaded kext at 7525516373620: com.apple.filesystems.smbfs
2.0.0 (addr 0xffffff7faa5db000, size 335872)
last unloaded kext at 4160298711302: com.apple.driver.AppleUSBCDC
4.2.1b2 (addr 0xffffff7faa5c9000, size 16384)
loaded kexts:
com.apple.filesystems.smbfs
2.0.0
com.apple.filesystems.msdosfs
1.9
com.apple.driver.AppleHWSensor
1.9.5d0
com.apple.driver.AudioAUUC
1.60
com.apple.driver.AGPM
100.14.11
com.apple.filesystems.autofs
3.0
com.apple.driver.AppleMikeyHIDDriver
124
com.apple.driver.AppleHDA
2.5.3fc1
com.apple.iokit.IOBluetoothSerialManager
4.2.0f6
com.apple.driver.AppleUpstreamUserClient
3.5.13
com.apple.iokit.IOUserEthernet
1.0.0d1
com.apple.driver.AppleIntelHD3000Graphics
8.1.8
com.apple.driver.AppleMikeyDriver
2.5.3fc1
com.apple.kext.AMDFramebuffer
1.1.4
com.apple.driver.AppleSMCLMU
2.0.4d1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
4.2.0f6
com.apple.driver.AppleSMCPDRC
1.0.0
com.apple.Dont_Steal_Mac_OS_X
7.0.0
com.apple.driver.AppleHWAccess
1
com.apple.driver.SMCMotionSensor
3.0.4d1
com.apple.driver.AppleIntelSNBGraphicsFB
8.1.8
com.apple.driver.AppleMuxControl
3.4.12
com.apple.driver.ACPI_SMC_PlatformPlugin
1.0.0
com.apple.driver.AppleMCCSControl
1.1.12
com.apple.driver.AppleLPC
1.7.0
com.apple.AMDRadeonX3000
1.1.4
com.apple.kext.AMD6000Controller
1.1.4
com.apple.driver.AppleThunderboltIP
1.0.10
com.apple.driver.AppleUSBTCButtons
240.2
com.apple.driver.AppleUSBTCKeyboard
240.2
com.apple.driver.AppleIRController
325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
1.0.0d1
com.apple.BootCache
35
com.apple.iokit.SCSITaskUserClient
3.6.0
com.apple.driver.XsanFilter
404
com.apple.iokit.IOAHCIBlockStorage
2.4.0
com.apple.driver.AppleUSBHub
650.4.4
com.apple.driver.AppleSDXC
1.4.0
com.apple.iokit.AppleBCM5701Ethernet
3.6.9b9
com.apple.driver.AirPort.Brcm4331
700.20.22
com.apple.driver.AppleFWOHCI
4.9.9
com.apple.driver.AppleAHCIPort
2.9.5
com.apple.driver.AppleUSBEHCI
650.4.1
com.apple.driver.AppleSmartBatteryManager
161.0.0
com.apple.driver.AppleACPIButtons
2.0
com.apple.driver.AppleRTC
2.0
com.apple.driver.AppleHPET
1.8
com.apple.driver.AppleSMBIOS
2.0
com.apple.driver.AppleACPIEC
2.0
com.apple.driver.AppleAPIC
1.7
com.apple.driver.AppleIntelCPUPowerManagementClient
216.0.0
com.apple.nke.applicationfirewall
153
com.apple.security.quarantine
3
com.apple.driver.AppleIntelCPUPowerManagement
216.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice
3.6.0
com.apple.iokit.IOUSBMassStorageClass
3.6.0
com.apple.kext.triggers
1.0
com.apple.driver.DspFuncLib
2.5.3fc1
com.apple.vecLib.kext
1.0.0
com.apple.iokit.IOAudioFamily
1.9.4fc11
com.apple.kext.OSvKernDSPLib
1.14
com.apple.iokit.IOSerialFamily
10.0.7
com.apple.iokit.IOSurface
91
com.apple.iokit.IOBluetoothFamily
4.2.0f6
com.apple.iokit.IOBluetoothHostControllerUSBTransport
4.2.0f6
com.apple.driver.AppleHDAController
2.5.3fc1
com.apple.iokit.IOHDAFamily
2.5.3fc1
com.apple.driver.AppleBacklightExpert
1.0.4
com.apple.iokit.IONDRVSupport
2.3.6
com.apple.driver.AppleGraphicsControl
3.4.12
com.apple.driver.IOPlatformPluginLegacy
1.0.0
com.apple.driver.AppleSMBusController
1.0.11d1
com.apple.iokit.IOFireWireIP
2.2.5
com.apple.driver.AppleSMBusPCI
1.0.12d1
com.apple.driver.IOPlatformPluginFamily
5.5.1d27
com.apple.driver.AppleSMC
3.1.6d1
com.apple.iokit.IOAcceleratorFamily
98.7.1
com.apple.kext.AMDSupport
1.1.4
com.apple.AppleGraphicsDeviceControl
3.4.12
com.apple.iokit.IOGraphicsFamily
2.3.6
com.apple.driver.AppleThunderboltDPInAdapter
2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily
2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter
1.4.0
com.apple.driver.AppleUSBMultitouch
240.6
com.apple.iokit.IOUSBHIDDriver
650.4.4
com.apple.driver.AppleUSBMergeNub
650.4.0
com.apple.driver.AppleUSBComposite
650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice
3.6.0
com.apple.iokit.IOBDStorageFamily
1.7
com.apple.iokit.IODVDStorageFamily
1.7.1
com.apple.iokit.IOCDStorageFamily
1.7.1
com.apple.iokit.IOAHCISerialATAPI
2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily
3.6.0
com.apple.driver.AppleThunderboltNHI
1.9.2
com.apple.iokit.IOThunderboltFamily
2.8.5
com.apple.iokit.IOUSBUserClient
650.4.4
com.apple.iokit.IOEthernetAVBController
1.0.3b3
com.apple.driver.mDNSOffloadUserClient
1.0.1b4
com.apple.iokit.IO80211Family
600.34
com.apple.iokit.IONetworkingFamily
3.2
com.apple.iokit.IOFireWireFamily
4.5.5
com.apple.iokit.IOAHCIFamily
2.6.0
com.apple.iokit.IOUSBFamily
650.4.4
com.apple.driver.AppleEFINVRAM
2.0
com.apple.driver.AppleEFIRuntime
2.0
com.apple.iokit.IOHIDFamily
2.0.0
com.apple.iokit.IOSMBusFamily
1.1
com.apple.security.sandbox
278.10
com.apple.kext.AppleMatch
1.0.0d1
com.apple.security.TMSafetyNet
7
com.apple.driver.AppleKeyStore
2
com.apple.driver.DiskImages
371.1
com.apple.iokit.IOStorageFamily
1.9
com.apple.iokit.IOReportFamily
21
com.apple.driver.AppleFDEKeyStore
28.30
com.apple.driver.AppleACPIPlatform
2.0
com.apple.iokit.IOPCIFamily
2.8
com.apple.iokit.IOACPIFamily
1.4
com.apple.kec.corecrypto
1.0
com.apple.kec.pthread
1
System Profile:
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2 GHz, 8 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6490M, AMD Radeon HD 6490M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393955353432382D3034302E4130314C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393955353432382D3034302E4130314C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9A302, 500,11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Microsoft Notebook Receiver v2.0
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: Cruzer Blade
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1

I have an issue with the tabs and windows disappearing....?

I have a constant problem with Firefox now. I notice that with Firefox 4 and 5 there has been a reoccurring problem with the tabs and windows closing on their own. If I have more than one window open, one of them will suddenly disappear and I wont see the tab at the bottom anymore until I click out of the one I am currently on. It is very annoying and only when I get out of Firefox completely will it sometimes reappear. Even more frightening is the fact that when I move the mouse downward to the bottom of the page the page shuts out as if I clicked out of it.
I am wondering if this is a security issue meaning some type of malware or virus that is manipulating my browser or is this a common issue that has some unknown cause? I would like to know what the cause is and how it can be fixed because it annoys me all the time. Please help!!

No Issue with the voltage in general. iPad is being charged via USB.
1. If you connect it directly to the computer - no problem.
2. If you want to charge it directly from the power socket you will need this:
http://store.apple.com/uk/product/MB706B/B/apple-usb-power-adapter
TZ

HT4527 Is there an issue with home sharing and windows 8?

Is there an issue with home sharing and windows 8? I've tried everything and cant get mine to work.

Here is the entire error listing after it states the installation encountered errors.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 2 error(s), 13 warning(s)
WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
WARNING: DW066: OS requirements not met for {601CB5BC-03F9-43CC-86F0-C75E65E6AF31}
WARNING: DW066: OS requirements not met for {56AE7FCC-81B2-4A63-A171-CD95C9295EF2}
WARNING: DW066: OS requirements not met for {4717AE70-5377-45C7-A9E9-4E400485F0BF}
WARNING: DW066: OS requirements not met for {8B59B329-26C1-48A4-A5AA-923F55B17B87}
WARNING: DW066: OS requirements not met for {948B7277-3D4C-4672-B1DB-24B3C83D704E}
WARNING: DW066: OS requirements not met for {25303D67-B573-460C-A0B6-B5CF2AE05045}
WARNING: DW066: OS requirements not met for {33E08F4F-42B7-42A9-89E4-443E02738DB0}
WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
WARNING: DW066: OS requirements not met for {F9FAC696-2E48-497D-B820-C9A65DA630DF}
WARNING: DW066: OS requirements not met for {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10}
WARNING: DW066: OS requirements not met for {C92E440F-EE79-4A28-B1E1-EC82B6F2AF33}
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

External hard drive use with both Mac and Windows

I know that you can't use an iPod (through iTunes) with both Mac and Windows, but can you still use it as an external hard drive with both operating systems?

Yes, if the iPod is in Windows format. Mac OS X can read and write Windows formatted iPods, but Windows can't access Mac formatted disks unless special software is installed.
(9844)

Problems with Acrobat 8 and Windows 7 64 bit

Hi all
I need help with Acrobat 8 and Windows 7.
During the installation I'm asked to locate the file AdobePDF.dll on the disk. Selected the file in C:\Program Files (x86)\Adobe\Acrobat 8.0\Acrobat\Xtras\AdobePDF\AMD64.
The installation finishes without any other problem.
The problem arises when I want to create a pdf from a Word document. I'm using Office 2007. When I select he option to create a pdf from a file, I get message in the attached image.
If I try to used the Adobe PDF printer from within Word, nothing happes. The small printer icon apprears in the Windows task bar, but that is all. If I double click on the icon, I can see the print job, but that's all. There is no dialog box that asks me to save the file.
Assistance will be apppreciated.

Acrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.

My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this

My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this?

Lbo51380 wrote:
cant find an itunes app for my laptop. is there something i can get that will help with this?
Go here -> http://www.apple.com/itunes/download/

Using Icloud with Outlook 2007 and windows 7, I cannot get my calendar to list the scheduled appointments as it used to do before I cloud. The to do bar just shows no upcoming appointments when my calendar is filled with them. How do I fix this

Since using ICloud with Office 2007 and Windows 7, the to-do-list will not show any appointments. If has the notation that no appointments are available? My calendar is full of appointments. How do I correct this?

I don't have a password on my phone. After attaching the phone to the Windows 7 computer, my DCIM folder is always empty. Here's the solution: While the phone is plugged in to the computer, pick it up and select the Photos application. A dialog box appears and asks if you trust this computer. Obviously, select the "Trust" option. Then the photos will download. If you have a password on your phone, I'm guessing you have to enter it before you open the photo application.

Airport Express and Windows 2000

Curious why the Airport Express documentation says that it will work with (a machine running) Windows 2000, but the software stops installing when it detects Windows 2000.
Also, given this, wondering if there is a workaround.
Thanks.
IBM thinkpad Windows 2000

Curious why the Airport Express documentation says
that it will work with (a machine running) Windows
2000, but the software stops installing when it
detects Windows 2000.
The AirPort Express Assistant is not compatible with Windows 2000.
To setup AirPort Express from a Windows 2000 computer, you must use AirPort Admin Utility for Windows version 4.0 or later.
http://www.apple.com/support/downloads/airport42forwindows.html
iFelix

My PC crashed with both CS6 and Lightroom 4. .

My PC crashed with both CS6 and Lightroom 4. . .I purchased a Mac Pro. Can I download the Mac versions of both programs and use my currenct serial numbers?

You can with Lightroom, but not (as far as I know) with Photoshop. You ought to get in touch with Adobe's customer service people and see if you can "sidegrade" to Mac for a relatively small fee.
Hal

PC Crash with Labview 7 and windows 2000

Similar Messages

Maybe you are looking for