PC- Doctor and hard drive test results

I have a T61 that has not been logging  past the "sign-in" screen, so it's not exactly BSOD...
I ran the PC Doctor diagnostic and my laptop "failed" 3 tests...
Hard Drive: SMART extended self-test FAILED
Hard Drive: Surface scan test FAILED
 also SMBIOS: SMBIOS: standards test FAILED
I went thru the whole "start BIOS setup utility" and
etc., etc, selected "hard drive" and pressed the F6 key to move to the first boot position.
etc. I even went through the ThinkVantage process to go back to "original factory settings"
but I still FAIL the 3 tests above, when I redo the testing in PC Doctor.
Is my internal hard drive "fried" ??
thanks for anyones help on this. I purchased this machine model 7658-CTO back in November 2007
and the warranty is no longer in place.
-Susan J.
Solved!
Go to Solution.

your hdd is on the verge of dying, so before it does, this is what you should do.
Burn yourself a set of recovery media, by going to start, program, thinkvantage, create recovery media. It should burn you 3 DVDs. 
Also you may need to backup any files that may need, by using the rescue and recovery feature under thinkvantage program list. Make sure you backup the hdd content to an external source, like an large usb drive, usb dvd burner or burnable dvd discs.
Now you would need to get a new hdd from somewhere (you don't need to buy it from Lenovo if you don't want), the hdd must be 2.5 inch form factor, 9.5 mm thick and have SATA connection. WD, Seagate, Hitachi, Samsung, Fujitsu all produce these drives up to 500 gig in size.
After you bought the hdd, you would need to remove the hdd, there is a screw that you need to unscrew. Now take off the cover for the internal hdd bay. Pull on that black mylar pull tab on the hdd, to remove it from the drive bay.
Remove the two rubber railings on both side of the hdd drive (anti shock). There four screw that holds the old hdd in the makeshift anti-static caddy, you would need a phillip screwdriver, after the screw is removed, replace the old hdd with the new one you bought. 
After you have reinstalled the new hdd in the laptop, run the Recovery media discs (3 DVD) from startup discs and follow the on screen prompts. This should restore the recovery partition, and reinstall all your OS and drivers like when you first got the laptop. If you have also created a rescue and recovery backup, you can restore the laptop to the original condition, by choosing restore.
www-307.ibm.com/pc/support/site.wss/MIGR-67980.html
if you have problem following the worded instruction on removing the hdd that i provided, you can look at the illustrated hardware manual provided in the link. 
Good luck
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

  • I did a hard drive test and got this error code.. what does it mean?

    4MEM/4/40000000: 0x6a494c18

    You did the Apple Hardware Test (not "hard drive test"), I presume? That error suggests RAM.
    You can do the extended AHT for more, or try downloading and running Rember:
    http://www.kelleycomputing.net/rember/

  • Memory modules and hard drive not recognized

    I removed and reinserted the factory installed Satellite L505D-LS5007 laptop hard drive and memory modules just as practice for installing a hard drive upgrade and an 8GB memory upgrade. The problem is obviously with the memory and not with the hard drive.
    After the first practice try, one memory module was recognized. Also for a few seconds after the first practice try, I ran the PC with the battery installed, but no memory installed. I did not look in the User's Guide first to see that I should have removed the battery before removing the memory.
    Now the System Indicator Lights for the HDD Activity and Memory Card Reader do not light up. The PC turns on and the display is solid black with no messages.
    Before buying new memory modules, what possible ways might there be to get the PC to recognize the factory installed memory modules and hard drive again?
    Solved!
    Go to Solution.

    When troubleshooting, I always change one variable at a time. I would hate to miss a solution by being in a hurry. In this case, you may have damaged either the RAM or the RAM slot. I would stick with the Toshiba specifications for the RAM, making sure it is the correct size, speed and type recommended. I also recommend that when you replace the RAM that both modules be from the same manufacturer, size, and specification. Try one RAM module in one slot and then the other. And then try both RAM modules in both slots. After the testing you should be able to figure if this is a RAM problem or a RAM slot problem.
    In the case of hard drives, the real test is whether or not the Bios sees the hard drive. If the Bios doesn't see the hard drive, it's not going to work. The Bios should see the hard drive whether or not the hard drive is partitioned, formatted or has data on it. My experience has been that many Toshiba laptops will work fine with larger capacity hard drives provided they are the same speed in RPMs, have the same interfacing connection and physically the same size.
    Again, prior to doing any work on your computer, make sure that both the AC power has been disconnected and the battery has been removed. Be careful out there. A blown repair job by a non-Toshiba tech is NOT covered under warranty.

  • New RAM and hard drive won't connect to computer.  It's still making the beeping noise.  Any ideas?

    My computer stopped working and I thought it was my RAM and hard drive so I bought a new one of each of these.  However, when I tried turning my computer back on after replacing them, it still made the beeping noise.  I am clueless.  Does anyone know what could be the cause and how to fix it.  Thanks!!

    What type of beeping noise?
    What machine specs? What type of RAM and HDD?
    Power On Self-Test Beep Definition - Part 2 - Support - Apple

  • HT5622 My Ipod Classic shows a red circle with a cross in the middle. I've completed diagnostic tests which have popped up, however any HP/FW/Hard Drive tests freeze the ipod, as if the hard drive won't spin. What do I do?

    My Ipod Classic shows a red circle with a cross in the middle. I've completed diagnostic tests which have popped up, however any HP/FW/Hard Drive tests freeze the ipod, as if the hard drive won't spin. What do I do?
    After holding down the Select and Play/Pause button, I was able to restart the Ipod and then it brought me to a Diagnositc test. I have tried doing both the Mannual and Annual test on the ipod however in each test, the ipod freezes on different access tests. The HP (headphones) test, shows the headphones are detected, but then if it tries to play a song to make sure they work it freezes and goes back to the red cross. I have looked at various other questions regarding the FW cable, however I don't believe i have such a cabel. Then the Hard Drive test freezes up and I can hear a ticking noise coming from the drive but it doesnt seem to be spinning. Alongside these test issues, any computer cannot see the Ipod when plugged in (including itunes). Therefore some tests for the USB drive cannot be completed. I do not recall dropping it badly, though I have dropped it previously. Does all this mean there is damage to the drive? Should I instead take it to an apple store?
    Many Thanks

    The stats look fine. Try the DFU Restore method shown in Corrupt iPod classic. It may pay to disable any anti-virus software and use the staged transfer method to reload data, assuming you get that far.
    tt2

  • Software based hard drive tests?

    Is there a software based hard drive tester out there? I have no idea how to test my now 7 year old hard drive on my MDD,just wondering if there are software based solutions as well as hardware,and where to get them,thanks!

    Excellent,thank you,just one more question,can the power supply be tested the same way,with software?Or am I stuck using a power supply tester,which I dont currently have(a link to a decent one would be nice,if I cant do this with software,that is).Again thanks for this,as I totally forgot which ones were the best :)Oh,and BTW,japamac,I just joined the Quicksilver club(if one exists )and found your blog an excellent resource for deciding on which one to get,as well as which upgrade parts to use.Recieving one this week,with an Radion 9800Pro card.Alraedy have a Firmtec card and am using a 1TB Hitachi jupiter series hard drive.The Quicksilver is a DP 800,and I'm running Leopard.I for one just want to take this time to thank you for all the help you have been to me and everyone who loves their Power PC G4's!!

  • Laptop dropped - trying to run hard drive test in bios, but can't find

    CAn someone tell me how to run a hard drive test in bios - I am not seeing it in the menu at the initial screen after hitting F2. Is there a disk I need to insert?

    The BIOS doesn't provide a HD diagnostic. The BIOS is firmware and is limited to providing
    basic functions like recognizing devices on the buss or providing the user the ability to
    load software to the HD.

  • What's the Difference Between Logic Board Failure and Hard Drive Failure

    Hi!
    So I wanted to know the difference between a Logic Board Failure and Hard Drive Failure because a couple of days ago I tried starting my computer up and I was welcomed by the Apple chime and a grey screen. I have been researching and most people say its either the hard drive or the logic board. So I am curious to know what are the symptoms of both. Thanks a lot, in advance!

    The hard drive is where the OS resides, if it dies there is no OS loading, so you can't boot. If you hook up your external drive with your clone of the internal drive, boot up and hold down the option key, select your clone drive as the startup drive in boot manager that then appears, and the computer boots normally, then the computer is OK, it is just the internal drive that has gone south. You don't have a clone to boot from? Now you know why you should.
    You could try booting from the DVD that came with the computer, hold down the "D" key to run diagnostics and see what the results are. If you can't boot into the diagnostics then a trip to the Apple store is probably in order.
    Francine
    Francine
    Schwieder

  • Opinions on Hard Drive Testing Software

    This will be a 2 part question, since I'm new to this forum.
    First, I own both a MBP and an iMac. The question I posted in the MBP section was this:
    --------START OF POST-------
    Hello friends!
    I came across the following link on hard drive test tools and was curious about the opinions people have for them, against them, or no opinion. Here's the link:
    http://forums.macrumors.com/showthread.php?t=1544280
    I would caution to read really only the first post because it contains the information I'm interested in, and later on the discussion quickly turns into complaint session about "Mac Keeper" which I have absolutely no interest in replicating.
    In advance, I thank you for your input!
    ---------END OF POST---------
    The other question has to do with this forum. The question above isn't system specific since all Apple computers have a hard drive or SSD of some sort. Is there a way to post a question into all hardware related forums instead of doing what I've done above, which is copy and paste from a previous thread to the other?
    As before, in advance, I thank you for your input!

    He wants to test his hard drives because it's fun and entertaining!!!
    I've seen that list before. I think it's become somewhat of the DeFacto list of those types of tools on the web.
    I use Scannerz myself because I didn't see any point in paying $100 for some of the other tools when a new drive costs anywhere from $40-$70 (US) for a "normal" sized drive. If you use its cursory mode it can scan SSDs and to the best of my knowledge it's the only tool that's capable of presenting Fusion Drive's to the end user on both a component basis (ie the SSD and the hard drive individually) or as a single entity (ie the entire Fusion Drive as a single unit). At present I don't have an SSD because I've been reading too many stories about third party units being problematic, but I'm assuming (is that safe??) that this will change in the next year or two.
    Considering how differently SSDs handle data vs. a hard drive, I have to wonder how good some of the features of the more expensive tools will be in the long run. For example, right now if a file is erased on a traditional hard drive, the data isn't really gone until it's overwritten, it's just marked as free space. This allows "recovery tools" to recover data. On an SSD with garbage collection enabled, I would think this would more or less kill that option. And of course, with an SSD, defragmentation isn't needed at all.
    It's sort of interesting how somehow or other, Mac Keeper managed to make it's way into that thread. If I open up a weather web site, there's an ad for Mac Keeper telling me I need to clean my Mac. If I log into a newspaper, once again, there's Mac Keeper telling me to clean my Mac. Some guy does a post on a web about drive testing tools, and in one way or another Mac Keeper STILL manages to end up dominating it...although in this case not so favorably!

  • I cannot install, only hard drive test. please help!

    hi,
    my iBook G4 crashed about 2 months ago and I got a new harddrive but it came with no operating system. I borrowed a friend's disks but everytime I put in disk 1 it will only go to Hard Drive Test and I cannot make it go to a section where I can actually reinstall. I have tried pressing command, c, command and c, and nothing. every time it goes to the Hard Drive Test and I have already run it and I passed.
    the girl with the disks also has an iBook G4 and I do not understand what the problem is. she just bought it after I did.
    I bought my laptop in the US but I am currently in Denmark and could not get Apple to actually fix my laptop but there should be no problem.
    please help!

    heychristaay,
    As I asked in My Previous Reply;
    "What OS was installed on your iBook before you replaced the HD?
    Have you tried installing, using either the disks that shipped with the iBook, or a Full Retail Version of an OS, that you may have upgraded to? Your own disks?'
    If the borrowed disks, do not look Exactly like THESE, they will not work to install Panther 10.3.x.
    Additional info in these links.
    Using OS X Install CDs/DVDs On Multiple Macs
    What's A Computer Specific Mac OS X Release
    Software Update, Upgrade: What's The Difference?
    ali b

  • I need to upgrade my macbook ram and hard drive pls help

    Hi all,
    I need to upgrade my macbook's RAM and hard drive as after 3 yrs of use it is showing signs of aging.
    I am novice in hardware stuff. I am planning on doing it entirely by myself and on tight budget will need to compare the prices across sellers and buy a suitable peice of kit. Please help
    Questions:
    1 - How to find out which RAm do I need to buy and what is the maximum I can go on my macbook?
    2 - How to find which hard drive to buy and what is the maximum my macbook will support?
    3 - Can I buy the SSD drive instead of SATA for this macbook?
    Some of the specs are listed below:
    Hardware Overview:
      Model Name:          MacBook
      Model Identifier:          MacBook5,2
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          2 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MB52.0088.B05
      SMC Version (system):          1.38f5
    MANY THANKS FOR READING AND REPLYING TO MY POST
    [email protected]

    Hi Chefjeegar
    Yes that screwdriver kit has the #00 phillips screwdriver that you need to access the RAM and hard drive. You'll also need the Torx driver to change the hard drive. http://www.amazon.co.uk/LINDY-Computer-Technician-Precision-Torx/dp/B0000934GO/r ef=sr_1_1?s=computers&ie=UTF8&qid=1348072554&sr=1-1
    For a good explanation about RAM look at the page on OWC http://eshop.macsales.com/shop/memory/MacBook/DDR2/
    In the UK Amazon or eBay might be your best bet for cheap RAM but read the description and reviews carefully. For a little more expensive but with a better warranty is Crucial UK http://www.crucial.com/uk/
    A good resource for working on your MacBook is ifixit.com http://www.ifixit.com/Device/MacBook_Core_2_Duo
    Is your external hard drive formatted for Mac? To transfer your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html Check that it's set up right by booting up from the external drive. Put the new drive in your MacBook, then format and partition the new drive. Then use Carbon Copy Cloner to transfer your OS back to the new drive.
    Yes, you can put an SSD in the MacBook.

  • Deleting a song from iTunes library and hard drive on Itunes 11.0

    how do i delete a song from iTunes library and hard drive on Itunes 11.0 at the same time.

    Hello CleveCo, Inc
    And welcome to Apple Discussions!
    At some point in time, you may have selected the option to prevent that dialog from appearing again when trying to delete tracks from your library. To reset all of iTunes warning dialogs, click the Edit drop down menu and choose Preferences from the list (on a Mac it is *iTunes -> Preferences* ). When the window pops up, head over to the Advanced tab and click the *Reset Warnings* button. Then quit iTunes and relaunch it. That do the trick for you?
    B-rock

  • How do i use airport as both time machine and hard drive? currently on Yosemite 10.10.1

    how do i use my 3TB airport time capsule as both time machine and hard drive? currently on Yosemite 10.10.1.....Many Thanks.

    Choose Computer from the Finder's Go menu and double-click it. If needed, use the Connect to Server command to log into it.
    (119763)

  • 2011 Macbook Pro - if i upgrade ram and Hard drive will it void my applecare ?

    2011 13" Macbook Pro - if i upgrade ram and Hard drive will it void my 3 years of applecare ?  - Does apple offer this service ?
    Thanks

    However it might be worth reading this article in The Register about Apple not using standard temperature sensing methodology  - see
    http://www.theregister.co.uk/2011/05/14/imac_hard_drive_replacement_woes/http://
    also read the links to OWC comments.

  • Is it possible to upgrade the ram and hard drive on the new retina after purchase ?

    hi i was wondering if it was possible to upgrade my macbook pro retina display to a bigger ram and hard drive or will i be stuck with 8 gb of ram and 256 gb hard drive?

    Sorry to say, you're stuck with it.
    If however, you just got your Retina, you have a 14 Day return/exchange in case you want something with more memory and a larger flash drive.
    Here's a suggestion - you'll be fine with 8GB since most people are still running on 4GB of RAM.  Why not just buy an external drive and save your files there so you don't fill up your flash drive in your Retina.
    Again, just a suggestion.

Maybe you are looking for

  • K7N2 Delta ILSR won't turn off, just restarts

    K7N2 Delta ILSR won't turn off, just restarts.  Every time I click on "Turn off computer" in Windows XP, it shuts down, but restarts again. Could this be OS related, or perhaps Bios related. My other machine, almost identical to this one, except that

  • Data load from ECC6 Unicode to BI7 MDMP

    Hello Contributors, We are upgrading R3 system to ECC6 Unicode but BI7 is still MDMP system. I'm testing data load and there are some errors related with unicode conversion. ECC has multiple langusges like English, Korean, Chinese etc... BI7 MDMP has

  • How to relink missing links that have no extensions

    I'm working with files received from another company. All the InDesign files have links listed in the Links palette with no extensions. The actual link files themselves HAVE extensions (mostly .jpg, some .psd, .ai, .pdf, etc.). All the links show up

  • Column Name change in IR

    Hi, I want to display the different column name in dashboard other than the column name in result set. for eg: I have the results with column name emp_id. now i want to display this column name as Employee_ID in dashboard. How to do this? Thanks in A

  • Is there any Similar between Class.forName() and new operator ???

    Plz tel me is there any Similar between Class.forName() and new operator ??? i have been asked this ques in interview