Pc does not come out of sleep mode, no display on monitor, no response from mouse or keyboard.

Computer acts as though it is in sleep mode, does not respond to keyboard or mouse input. Confirmed monitor is OK. turning power on and of does not fix this issue. any ideas on how this migt be fixed?

The key issue is power. Please use this guide to test the PSU.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

  • New 2nd Gen Macbook Pro does not come out of sleep mode overnight

    I bought the new generation macbook pro last week and every night when I closed the lid of the computer, it would not wake up in the morning. I had to press the on button several times before it restarted. I then get a message that my computer was shut down improperly. It also had some serious trackpad issues.
    I brought it in and they gave me a new one. At first they thought I was given the older machine by accident...but I was not.
    Anyway, I took it home and the first night it was okay but the 2nd night it had the same problem. fyi..I migrated all my files from the old computer to this one and don't know if that could cause the problem.
    Does anyone know how to fix this?
    Omzone

    I bought the new generation macbook pro last week and every night when I closed the lid of the computer, it would not wake up in the morning. I had to press the on button several times before it restarted. I then get a message that my computer was shut down improperly. It also had some serious trackpad issues.
    I brought it in and they gave me a new one. At first they thought I was given the older machine by accident...but I was not.
    Anyway, I took it home and the first night it was okay but the 2nd night it had the same problem. fyi..I migrated all my files from the old computer to this one and don't know if that could cause the problem.
    Does anyone know how to fix this?
    Omzone

  • Monitor does not come out of sleep Mac-Mini Mini-DVI to Dual  DVI-D cable

    I have an August 2009 Mac-Mini that I'm using with an Apple supplied Mini-DVI to DVI adapter along with a DVI-D Dual Link Cable connect to a Sceptre X7XV-Naga+ LCD monitor.
    The monitor is going into sleep mode on its own with no way to disable this feature on the monitor itself. I've disabled sleep mode on the Mac-Mini in the power setting in System Preferences.
    When in sleep mode and I move the mouse or press a key, the monitor will not come out of sleep mode. From other posts, I read that the issue might be that I wasn't using a Dual-Link DVI-D cable, so I bought one and installed such a cable. That has not resolved the problem. The monitor will not come out of sleep mode. When I have the monitor connected with a mini-display port to VGA adapter instead of a DVI-D cable, it will come out of sleep mode every time.
    Message was edited by: Annorax64

    I know it's a year later, but I'm not finding much through search.
    I have the same exact problem.  Difference being I'm using an iMac with 10.7.5.
    Same video board and monitor - ATI Radeon HD 6750M video card connected via DisplayPort to Samsing S24A850DW.
    I've tried two different mini-DisplayPort to DisplayPort cables and no change.
    I think I read that 10.8.3 might fix the issue.  Anyone that can confirm that, or has another solution?

  • HP LaserJet P3005x will not come out of sleep mode

    Printer will not come out of sleep mode (after being in sleep mode for an extended period of time (over 24 hrs)).  When this happens, I can not ping the printer and pressing any of the buttons on the printer will not bring it out of sleep mode.  I'm testing now to see if I can recreate this with the printer attached to my PC via USB.

    Hi arosecarter,
    I understand your monitor is not coming out of sleep mode. Take a look at the following support document, Resolving Problems with Sleep and Hibernate Modes (Windows 7). Step 3 might be of particular interest to you, as you mentioned your keyboard and mouse are not really working for you either. Perhaps it is another connected device that is causing the issue? Anyway, hopefully this document will be of help to you. Best of luck. Have a wonderful day.
    Ryan1216
    I work on behalf of HP
    The advice and opinions given here are my own and not those of HP

  • Printer now will not come out of sleep mode with new MiFi 5510L

    I have a HP 3522 All In One wireless printer networked via my MiFI router that goes into sleep mode as it is supposed to after a set period of idle time but the only way I can get it back on line/wake up is to unplug it and plug it back in.  While asleep, none of the buttons work and all print jobs fail because the 'printer cannot be found'.  I never had this problem until I upgraded from an older MiFi unit to the 5510L.
    I am using a MacBook Pro and MacBook Air both running OS X Mavericks 10.9.1
    Any ideas?
    Thanks,
    Dave

    KSutherland, I'm so sorry this is occurring with your phone. I understand how frustrating this can be when you're trying to use your phone and have to pull the battery. I researched information about your phone that have been reported by customers and didn't find this as a known issue. I also show the Bionic received a software update on December 9, 2011. I recommend updating your phone to the new software, which can assist with. I listed a link below with information and instructions for the update.
    http://support.verizonwireless.com/system_update/droid_bionic.html
    Additionally, I would also like to recommend clearing the cache and browser history. This can help the device from having slow functionalities. The steps are below:
      From a Home screen, select the App menu (located in the lower right).
    Select Browser.
    If the application icon is missing, select App menu filter (located at the top) then select All apps.
    Select Menu.
    Select More.
    Select Settings.
      Within settings you can clear the following :
    --Clear all, which clears all deletes history, cache, cookies, form data and passwords
    --Clear cache, which clears visited website content stored on the device. The cache enables the browser to download only the content that has changed since the last time a website was visited. Since the browser only downloads changed content, pages are loaded faster.
    --Clear history, which clears a listing of URLs (website addresses) that have been recently visited.
    --Clear cookie data, which clears some cookies contain customized preference and logon information for previously visited websites. Once deleted, the website may prompt for this information again.
    Pleas let us know if the above steps work for you.
    Have a good day.
    KinquanaH_VZW
    Follow us on Twitter @vzwsupport

  • HT201263 iPad screen went black when fully charged and would not come out of sleep mode, turn on or off and did nothing when connected to USB port?

    I really do not want to restore this iPad if I can find another solution.  I had to let the battery drain completely in order to prepare it for restore, so I'm prepared to do that if I must.

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • U410 Touch won't come out of sleep mode

    I've been having some serious issues with my 3 month old ideapad U410 touch. I first started having problems after installing Windows 8.1. There were many compatibility issues and I had to do a restore to factory settings to go back to Windows 8. That was a pain. Then I continued having errors messages regarding the Intel Rapid Start Technology, so I called Lenovo support. The technician helped me get into BIOS and disable the IRST, but then my computer took much longer to boot and it would power down any time I closed the laptop. They advised me to send my computer to a warranty service center. 
    I just received my computer today. It seems as though they did not solve the problem. The first time I closed the laptop to put it into sleep mode, it would not come out of sleep mode. It would go to the windows screen, but it would not allow me to log in. I contacted support again and they told me that I should try to do a factory restore (again). They then told me that since this is a software issue and not a hardware issue that I would have to contact their paid service to get further help. This has been a very frustrating experience and I am on the verge of telling everyone I know about the poor service I've received. I was very happy with my system until about a month ago. 
    Does anyone have any advice on how to fix this issue?

    hi okskate313,
    Welcome to Lenovo Community Forums!
    Please try the steps or suggestions here
    http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/u310-touch-Wakes-from-sleep-then-goes-back-...
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My 3G is not coming out of sleep mode

    I've had my iPhone for 2 days. Saturday morning when I woke up, the phone would not come out of sleep mode. The phone was on, and would ring when a call came in, but the screen is blank. It wouldn't accept a hard restart for about 30 minutes. My husband was finally able to give it a hard restart. We thought it was a software glitch and was fine. This morning it's the same deal. The phone can be turned on and off, but the screen is black. This time, we have been unsuccessful with a hard restart.
    Should I just head back to the store or can I fix this?

    My 3G did this, and I went and got the phone replaced.
    But make sure that the screen isn't working. I had managed to get mine working, so they didn't believe me, one week later I show back up with the phone working, but no screen. Got changed out real quick at that point.

  • My dropped Macbook plays a five note song three times and on the third time, the last note drops in pitch like it is dying. I have not shut it off, but it does this coming out of sleep mode. Can't find any references to this. Anyone know what's happening?

    My dropped Macbook plays a five note song three times and on the third time, the last note drops in pitch like it is dying. I have not shut it off, but it does this coming out of sleep mode. Can't find any references to this. Anyone know what's happening?

    carolinechx wrote:
    i know the description may be a little bit too confusing
    Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

  • It doesn't come out of sleep mode. making me re-start it.

    I have a MacBook Pro, A 2.33 GHz Intel Core,15". When I shut the lid, it won't come out of sleep mode. Making me have to re-start the computer. It started ever once in a while. Now it seems like every time. I tired if this problem. Is there any other MacBook Pro users having this problem. No, this is not my first mac. I've been a Mac user for over thirteen years. Please help... thanks Mac For life Moose

    Never had this problem!
    Weird...
    but before you take it in to apple try restoring it on iTunes first. Or reseting it.
    I would not be surprised if this was an original iPad but the second one!!!

  • MacBook Pro comes out of sleep mode while lid is closed

    Hey guys,
    I have a MacBook Pro that is slightly over a year old. I'm running Leopard 10.5.5, and I have a strange problem where the computer comes out of sleep mode while the lid is still closed. This happens without any USB plugs being inserted or removed. Basically it just comes out of sleep (I can tell because I can hear the hard drive spin up as well as the noise the cd-drive makes when it's woken up), then it seems to realize that the lid is still closed and goes back to sleep. This used to happen somewhat infrequently, but I got fed up when this happened today about 10 times in a row as I was trying to study for an exam.
    I have applecare so I'm not worried about having to take it in, it's just a strange, annoying problem. I have not been able to find anything from searching google or the help forums, so if anyone knows what could be causing this and how I can fix the problem it would be greatly appreciated.
    Thanks
    Message was edited by: SFR6

    I did as you said, and I think I found the perpetrating program. It showed:
    "11/28/08 11:41:24 PM [0x0-0xb90b9].com.apple.Safari[1261] Fri Nov 28 23:41:24 Macintosh-37.local Safari[1261] <Error>: Invalid JPEG file structure: SOS before SOF\n"
    Any idea what this means? The only other thing that showed up as an issue was:
    "11/28/08 11:42:16 PM iCal[1267] * Assertion failure in -[CoreEventResizeTracker mouseUp:sender:], /SourceCache/iCal/iCal-1270/iCal/src/calendar-views/x-days/CoreEventCreationTra cker.m:697"
    or
    "11/29/08 12:19:34 AM com.apple.launchd[1] (com.apple.backupd-wake[1287]) Exited with exit code: 1"
    I have no idea what this means, so if anyone can shed some light on it it would be very much appreciated.

  • Wont come out of sleep mode

    Hooked up my new computer and cant get the monitor. I am just a little literate in computers. After reading other problem tried the f 10 and that did nothing. Everything seems to have power and i can hear the computer running. Help please!!

    Hello , I understand that your new computer is not able to come out of sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues in Windows 8. This should help to enable your system to enter sleep mode without crashing. I also suggest resetting the default power schemes on your system by following the steps below: Step 1. Click the Start button
    Step 2. In the search box, type "Command Prompt"
    Step 3. Right-click Command PromptStep 4. Click Run as administrator
    Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter  reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards

  • TS3694 I have attempted to update my iphone to ios8. My phone has gone into recovery mode. I have tried all of your recommendation and it will not come out of recovery mode. HELP!

    I have attempted to update my iPhone to ios8. My phone has gone into recovery mode. I have tried all of your recommendation and it will not come out of recovery mode. HELP!

    Without knowing what you did and exactly what happened (error messages) all I can suggest is:
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

    my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

    Hey erinoneill24,
    Thanks for using Apple Support Communities.
    Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
    iPod displays "Use iTunes to restore" message
    http://support.apple.com/kb/ts1441?viewlocale=it_it
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
    If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
    Have a nice day,
    Mario

  • HT1414 my iphone 4 running on IOS 5 will not come out of recovery mode and gives the error code -1. Can any one help me please because i've been without a phone for 2 weeks and still not getting anywhere.

    Hi there could someone out there please help i've got a Iphone 4 running on IOS 5 and it will not come out of recovery mode> It comes up with the error code -1 which i've looked everywhere on the web but no one seams to have the same issue.
    This is a reconditioned replacement phone from the apple genius guys which i paid £130 for and only got 3 months warranty with and as soon as the warranty run out it crashed on me and never been able to get it back out of recovery mode. I've been back to the apple genius guys and they have told me there's nothing they can do other than charge me £130 to take the phone off me and give me another reconditioned phone with a 3 month warranty. Which as you can properly tell i dont want to.
    PLEASE PLEASE HELP ME thanks for your time

    This is a bad hardware error, Baseband Error. Some have reported getting through this error by Restoring iPhone with the SIM Card removed. Try that. Try restoring with different computer. Search Web some more for other thoughts.

Maybe you are looking for

  • I'd love to get an imac but is there a way to upgrade the sound card?

    I love the new imac's.. but I would need to upgrade the sound card if I got one. I have a recording studio and i'm using a delta 1010 pci card that is compatible with macs.. I can't see how it would work with an imac.. I'm also a graphic artist and u

  • Question about dll. error message when loading - PSE 6

    I have PSE 6 and suddenly get the following error message when I open PSE:  Organizer-Photoshop Element PhotoshopElementsOrganizer exe- entry point fot found.  CFBundle Copy File TypeForFileData could not be located in dynamic linc library core found

  • Warning Messages in the log file

    Hi, I see following warning message in my log files. Can any one help me what exactly this means? "Skipping grouping rule '(null)' in profile 'Global_Profile_Records_Management_FieldGroup'. The grouped field 'xCategoryID' is a parent " Thanks, Vidya

  • Master and Slave configurations

    Hi I am currently wondering why my master and slave configurations dan't work. I have the Rev. B mother board and I set the jumpers to the right spots. I am trying to get my CD Burner to work with my regular CD Rom on the same wire.

  • Start up resolution is weird

    Hi all, I just got my first mac on monday (nov. 21) and I'm loving it. When I start it up, the white screen with the apple logo and the swirly thing underneath the logo is at a weird resolution, a much low resolution then the 24inch's normal 1900x120