PC does not come to life straight away when left over night )-:
I'm new to this forum so be gentle and a big hello to everyone (-:
A few days ago my PC stopped turning on (no lights or fans or anything) after being off over night. If I press the power button I get nothing but if I press it dozens of times or leave it 10 mins it springs into life and then for the rest of the day it works fine and can be shut down and ON again no problems until its left over night again and then the same problem. I'm assuming its losing its charge over a long period of time and will only power on after its had chance to take on more juice....just a theory.
System Specs
MSI Z77A-G45 motherboard (latest BIOS) (the battery seems fine too)
Sapphire 7950 Vapor-X (overclocked to 1050 core and 1300 mem)
Intel i5 3570K 3.4 (overclocked to 4.4)
Corsair AX650 PSU
8gb Corsair Vengeance ram.
256 GB M4 SSD
Windows 7 (64bit)
At first I thought it may be the power button on my Phantom 410 as its a bit dodgy but I checked the pins on the mainboard with a screwdriver and its fine. My only other two thoughts are either its bad Caps on the mainboard or a dodgy 5v rail on PSU but that seems unlikely.
Any help would be most welcome
Thank You
Quote from: Torment74 on 06-April-13, 20:03:43
UPDATE!
Ok...when i come to turn my PC on in the morning I press power button and get nothing.....but if I turn the PSU off then on again (Using switch on back of PSU) hey presto it starts every time.....I might be able to live with this as sending PSU off to america could take weeks and weeks.
Those PSU's are normally extremely reliable units! Glad to hear you have found a workaround that will work for the time being.
Similar Messages
-
MOVED: PC does not come to life straight away when left over night )-:
This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=167931.0Quote from: Torment74 on 06-April-13, 20:03:43
UPDATE!
Ok...when i come to turn my PC on in the morning I press power button and get nothing.....but if I turn the PSU off then on again (Using switch on back of PSU) hey presto it starts every time.....I might be able to live with this as sending PSU off to america could take weeks and weeks.
Those PSU's are normally extremely reliable units! Glad to hear you have found a workaround that will work for the time being. -
We are unable to access firefox. It does not come on when you key on the menu bar
Hi, Just put phone in the recovery mode and restore to the factory settings. It should work.
-
Why does my iPad not show AirPlay icon when I'm playing iTune music? I want to use me Denon receiver in Zone 2 speakers.
Swipe up from the bottom of the screen, tap on "AirPlay".
The User Guide is available here. -
Trouble shooting info from my computer attached as requested, but problem exists on other people's computers also, including MACs.
Problem exists only with <iframe> link within a page that is part of a frameset. If page contained within a frameset is accessed directly (ie, show only this frame) then the <iframe> link works normally.
Works ok in Internet Explorer, used to work in Firefox. If RIGHT click on the <iframe> link then select either new tab or new window it works OK.At first I was ending up opening to the Help page, but finally u sent me instructions that worked. Now my Net connection opens to my Yahoo page.
-
My project is set up with "rotation" menu intro, video, and then "rotation" on end, however, when you put DVD disc in DVD player, menu does not come up on front end, it goes straight to the video. Is there some step I am missing?
Open your iDVD project and go into the Map mode. Made sure the autostart bin on the left is empty.
Click to view full size
If you find a video in that bin remove it, save the project as a disk image and check the disk image with DVD Player. Then you can burn the disk image to disk with Disk Utilitiy at 4x for optimal burning.
OT -
# Question
there are times when I try to start firefox 3.6 that it does not come up,but when I click it again, I get fire fox is running but not responding, close fire fox, or shut down computer. There are other times that it starts up normally wit no probs
..Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd -
how long does the recycle program take or do they give you an ipod straight away when you are at the store.when you buy from the store do they do free ipod engraving
How recently did you switch? If it's less than 60 days, then Verizon simply reinstates your previous account. The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices. I'm not sure how it will go - but since you are still being billed for the devices...
-
My Iphone 4 does not come with a SOFTWARE UPDATE option.
My partner bought my iphone 4 version 4.2 about two years ago from a well known store. He got himself one at the same time but i cannot update mine because it does not come with an option in settings, general that allows me to update it. All of my apps are useless as they need at least iSO5 to run. I cannot check my bank accounts or anything. I have rung and spoke to apple many of times and followed all the steps to try and update. As this is not my fault and the iphone had not been loaded with the correct software there should be something APPLE could do free of charge!!!! I really need help as i cannot afford a replacement or want one. I just dont know what to do anymore!!
Hi there wishheartgirl,
You may find the information in the article below helpful.
iOS 4: Updating your device to iOS 5 or later
http://support.apple.com/kb/HT4972
-Griff W. -
ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source
What model iPad do you have? If it's an iPad 1, the battery may have expired and needs replacement.
Cheers, Tom -
Report does not come up when called from Forms
I have installed Oracle 9i database and dveloper suit on my pc. When I run reports from forms, the report does not come up. I have Adobe Acrobat reader 6. The report does get created, I can see it in the cache directory.
It created an error file, I am posting the begining of this file here.
Please help.
Thanking you in advance.
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x65553878
Function name=Java_oracle_reports_engine_EngineImpl_CGetEnv
Library=C:\orahome1\bin\rw90.dll
Current Java thread:
at oracle.reports.engine.EngineImpl.CGetEnv(Native Method)
at oracle.reports.engine.EngineImpl.getEnvs(EngineImpl.java:453)
at oracle.reports.engine.EngineClassPOATie.getEnvs(EngineClassPOATie.java:152)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:205)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)Hi ,
Looks like this is not a Forms side problem or even a Reports Servlet problem
Some guesses.
From the exception
at oracle.reports.engine.EngineImpl.CGetEnv(Native Method)
at oracle.reports.engine.EngineImpl.getEnvs(EngineImpl.java:453)
it looks like engine crashing. Did you see the server GUI up and running ? Server might not have started
Give
rwserver server=<server_name> in command line.
The server GUI should come up and show "ready "
You have multiple Oracle Homes on the same machine. So this could be a PATH problem.
1) Go to ControlPanel -> System - Advanced - Env variables - System Variables
Copy the IDS specific PATH to clipboard
Go to iDS_HOME\bin\ and open a command window. Set only the above PATH here. Start a standalone server
rwserver server=<server_name>
and try
(If this works you could write a batch file later)
2) For trouble shooting purposes use a different server name to start the standalone server.
3) Also look in your registry
HKLM\Software\Oracle\Home<x>\
Here please see whether you have any "very long" environment variable (say more than 256 chars or 512 chars).
This is just a guess.
4) To confirm this is not a Reports servlet problem
give
rwclient report=<report_name> + ..... <server=server_name>
If you get same error, then it is not a servlet problem. It could be that Reports server is crashing
Thanks
Ratheesh
[ All Docs ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf -
my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.
-
I want to email a Pages document as a Word doc. I used to be able to do this by clicking on 'share' then 'send via mail' then on 'Word' and an email would appear with my word doc attached. Now the email does not come up. Why?
It's difficult to do more than guess when you don't say what version of OS X or Pages you're running, but if you're on the latest, have you tried the Share menu -> Send via Mail command?
If that doesn't help, you may have better luck if you ask in the Pages forum:
Pages
When you repost, be sure to include full details about your versions so that people know what it is you're working with.
Regards. -
When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position. How can I get these multiple e mails prioritized?
We are talking about the Mail app, right? In the Mail menubar, click on Window and then Previous Recipients:
That eliminates the previous recipients. If you are talking about the suggestions because there are 10 people with the name 'Steve' in your Contacts, then I do not know how to eliminate those unless you change the name slightly or wait until you type the last name or some other differentiator. -
My daughter forget her password and now her ipod touch is disabled. Red message says to connect to itunes. When I do connect to itunes, the device is not recognized and then a message comes on the screen that says it is locked and to enter the password to access it. I cannot access the password and since itunes does not recognize the device, it does not come up on the list on the left, i cannot reset it. What do I need to do so she can use her ipod touch again? Thanks
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Maybe you are looking for
-
How do I print a PDF file to poster size on Mac
Hi, Is there a way to print (on a Mac computer) a PDF file that is in Acrobat Reader to tile it to print in several sheets. (This would be like printing to a PC, using the Poster setting.) The original file is a single sheet that needs to be enlarge
-
Can I filter emails in icloud by selecting a sentence in the email body
I have received thousands of unwanted emails from a myriad of addresses, in a similar format, but each of which has a different randomly generated set of letters and numbers in the subject - so there is no point in selecting the email addresses or su
-
In snow leopard, 2 fingers to the left on the mouse went back to the previous page. In Lion, it opens the dashboard. How can i make firefox go back to previous page with two fingers left on the mouse??
-
Why can't I install the actualization of some apps on my MacBook?
I can't install the actualizations of Safari (version: 5.1.2), iTunes (v, 10.5.2), iPhoto (v, 9.2.1), Security Actualization 2011-06, Keynote, Java (v, 6), and Camera compatibility actualization. The process start normaly and all the actualizations a
-
How can i sync notes on ipad and iphone using itunes?
how can i sync notes on ipad and iphone using itunes? it used to work with me before upgrading to mountain lion.