PC does not recognise ipad
Got a new ipad2 for christmas, but PC only recognises it as a camera, and not in itunes. Any ideas?
Locate your iPad again as an external device where it is showing up as a camera.
Right click on it and go to Properties
There should be a place to set what will happen each time the device is connected, set it to do nothing. Disconnect/ reconnect again and see does iTunes now pick it up.
Similar Messages
-
I-tunes does not recognise ipad to restore after failed update to ios 5
i-tunes does not recognise ipad to restore after failed update to ios 5. Connected i-pad to update to new ios 5. Back-upp went fine but update failed and now i-tunes does not recognise the devise and i-pad will not work so I have no known way to restore.
Copied from that article.....
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
Are you releasing the home button when you see the connect to iTunes screen? Does iTunes start on its own? If it doesn't - start iTunes yourself.
Also copied from the article.....
5. If necessary, open iTunes. You should see the following "recovery mode" alert: -
Help, got an iPad 2 and it will not turn on? Just got a blank screen with a apple logo. Tried restore (I.e. holding down both buttons for 10min) iTunes also does not recognise iPad when connected to mac?
If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
-
Itunes does not recognise ipad or iphone after window 8.1 patch May 2014
Last week my laptop did a patch update to windows 8.1 and now Itunes does not recognise my ipad or iphone when i plug them into the USB ports.
The devices do ask "to trust the computer" and Windows itself reconises the ipad and iphone and i can get to files on the apple products through windows but itunes doesnt see them and therefore doesnt sync therefore i cant download music onto my phone etc.
Ps i did uninstall itunes and reinstalled but this didnt work. Although after reading about other people with similar issues on past window updates I think I may need to uninstall all apple software .
I have an old Ipod 5G that works fine with Itunes.
Anybody with similar issues and a plan to get this sorted ?...... as i need music on my phone for holiday !!Hello andyv,
Thanks for using Apple Support Communities.
To troubleshoot this issue of your iPad not being recognized by iTunes on your Windows PC please follow the troubleshooting in the article below:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Take care,
Alex H. -
Itunes 11.2.2.3 does not recognise ipad air
when I plug my new ipad air in my pc, itunes does not feel and recognise it
Hey scimmia,
Thanks for using Apple Support Communities.
Sounds like you are not getting iTunes to recognize the iOS device. Follow these steps and test after each section.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Have a nice day,
Mario -
Itunes on windows does not recognise ipad
iTunes on my windows xp pc does not always recognise my iPad. Also, the icon in the task bar which indicates when a usb device is attached, does not appear.
Neither of these problems appear when I attach my iPod.
Any suggestions will be welcome
RobinThe iPad, iPod Touch and iPhone do not appear as external drives which is why they do not show up in your Task Bar as externals the way an iPod will do if the option "Manually manage music…" has been checked. With that option selected the option "Enable disk use…" automatically becomes available which means that you can drag files to the unused portion of the drive. This is not the case with the devices mentioned above. As to the recognition of your iPad by iTunes you might want to check to see that the connection is firmly in place each time that you mount it onto the computer-- both the computer USB connection and the Apple Dock connector.
-
I have tried to sync both ipod and ipad2 (new) with itunes running on win 7 64 bit. I have all latest versions installed on all machines.
The ipod and ipad are just not recognised in itunes.
I have an old win7 32 bit system on the same machine and everything works perfectly.
Any ideas welcome.http://randomwindowstips.wordpress.com/2009/12/08/windows-7-itunes-9-software-is -not-installed/.
This was the answer to all my problems, once i updated the drivers all good! My iPad kept insisting I didnt have the 64bit itunes (which i did) and when I checked the files I was supposed to have as per the link instructions, I had none of them. Disappointed I had to turn to some random files off a blog rather than having apple actually provide useful help. As long as they are making money though :Z -
I tried pressing home and sleep together but iPad does not respond
See here http://support.apple.com/kb/HT1808
And note the the sentence commencing, 'If you restore from a different computer.... ' down near the bottom of the page. -
I have updated my laptop to windows 8.1. My laptop now does not recognise my iphone, nano or ipad? I have uninstaled and reinstalled. I can downlaod pictures off my iphone but not connect to itunes?
Please helpiOS: Device not recognized in iTunes for Windows
-
Facetime on my ipad does not recognise my apple id password after i have upgraded to iOS 6.1
After upgrading my ipad to iOS 6.1, Facetime does not recognise my Apple ID password. The password works fine on the app store, I have even tried changing the password, but Facetime refuses to recognise the password, and therefore unable to activate. Has anyone else faced such an issue?
The Connect to iTunes screen appears when something went wrong on your iPad or the update requires connecting your device to your computer running iTunes. Start iTunes on your computer and connect your iPad. Usually you will be guided through the process of getting your iPad running again. If not come back here for assistance.
-
My ipad is dissabled as it does not recognise the passcode i have put in after updating the software . How can i unlock ?
I updated my iPhone 4S to IOS 7.0.2 then tried to use a complex password instead of 4 numbers.
Even though the password was verified and correct, I am now locked out of my device.
Unfortunately I do not have a recent backup of my device and, as far as I know, a restore from backup is the only solution to the problem. -
Since upgrading to the latest IOS, Airplay does not recognise my Pioneer vsx-1122-k on my iPad, I can control my receiver via the pioneer app on my iPad so it is just airplay not a connectivity issue. My Panasonic Stereo is recognised on Airplay.
Hi
I don't know if you're still having this issue but there is a way round it as I'm having the same troubles.
I've just spoken to Apple about it and found out:
– If you have a Mac made before Mid-2011, it doesn't have a piece of hardware needed to take advantage of the 'Airplay mirroring'
– So you can update to a later version 10.6.8+ but this won't help at all
The way round it:
– Download 'Airfoil' and install this
– You can then play music from any defined source (Spotify, Quicktime etc) through your Airplay connected speakers
So sadly, for those have a Mac from before Mid-2011 there's isn't an option that's as easy as Option-click on the sound icon to switch to Airplay speakers.
Hope that helps, I can now get on with the rest of my day now after sorting this out.
Adam -
Since I've upgraded to Maverick on my Macbook Pro the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?
I have over 250G backed up and I really don't want to reset everything and start again.
Not sure what you mean here.
A reset will not affect any of the data on the Time Capsule hard drive. You would have to perform a completely separate and very deliberate Erase Disk operation for that to occur.
I'm not recommending that you perform a default reset, but it is an option if there is really nothing else to try.
I don't know if what you are seeing is a Mavericks issue or not, since I refuse to use any new software until at least the first major update with fixes comes along.
Another user may be able to offer more input on Mavericks. -
My iPad won't send emails despite identical settings with iPhone which does work. " server does not recognise email address" resetting account fails to solve issue. What else can I try?
Have you checked ALL the settings including the port assignments? Easiest way to get those back to is to delete the email account from the iPad then redo the email account. Usually the ISP providing the email account will have instructions on their web site.
-
My iPad suddenly does not recognise my you tube password yet it works on my laptop
My iPad suddenly does not recognise my you tube password yet it works on my laptop.
Find Apple ID
https://iforgot.apple.com/applied
Cheers, Tom
Maybe you are looking for
-
Windows Vista and Outlook Express 2003 on a Satellite A100-014
Does anyone have the same problem as i am experiencing? When i try to reply to an email with outlook express on my computer with windows vista home, if the email is originally an html formatted message, hitting the reply button and starting to type u
-
How to maintain Space between text in Smart form
Hi Experts, How to maintain space between text in smat form. For example I need to maintain like this Prepared By: Passed By: Approved By: but after save it come like this Prepared By: Passed By:
-
Headphone jack works with one headphone instead of both. Is there a way i can fix it?
I want to fix my headphone jack so i can use both the headphones. Anyone know where i can fix it or how to fix it and where to buy the part at? I would love to have someones help. Thank you ahead of time. Love, Kayla
-
I've been using my memory card from my Canon camera to upload photos to iPhoto. No problem. I attempted to use my daughter's memory card from her Canon camera (different model) and I get a pop up window stating "No images on memory card meet the do
-
Problem with using View Generator Plug-in in AWM
Hi, I have noticed that the View Generator Plug-in does not show me the Level Short Desc and Level Long Desc when I pick the fields to be written to the view. Has anybody encountered this before? I am using Oracle 10gR2 Thanks, Bharat