PC DOESN'T DETECT ZEN MICRO

after I downloaded the latest firmware updates/drivers for my zen micro, my pc doesn't detect my player. i can't view songs via windows explorer, creative interface or windows media player.
i tried uninstalling and then re-installing all of the creative software from cd, but that didn't work.
everything worked before i installed the drivers...
please help?

i got my player to work on my pc again... FINALLY. in the device manager, i hit 'update driver' and my player was detected (at least signaled on the player). when i tried to access songs via windows explorer, it then said it wasn't detected and then the icon on the player was gone again.
sooo000, i hit 'update driver' again and again the icon reappeared on the player saying it was docked. while the icon was still there i reinstalled the driver (. ) and replaced the existing driver.
voila!! it works again!!! hopefully this post will help someone else out there. it's a great player and i'm just happy i can use it on my pc.
thanks everyone!

Similar Messages

  • Windows doesn't detect Zen V Plus he

    I've just purchased the Creative Zen V Plus 4gb for my girlfriend but windows doesn't want to detect it, I have followed the?online suggestions with no?luck. It shows in my device manager but with an exclamation mark next to it, I've tried re-installing the driver with?no luck. I've tried this with media player 0 and just updated to series but am still having the same problem. I think all I need is a driver for this player but the software that came with it is not helping me! I have a ipod which I use on the same usb port and that works fine so why doesn't the Zen work!?
    Your help would be very much appreciated.

    Did you try to connect your device to Windows Media Player , under "Sync" Did you download and install all latest drivers and software (see below) ZEN V Plus and then Windows Vista 32-bit. http://us.creative.com/support/downl...ype=0&x=27&y=3

  • New firmware but Creative software doesn't detect Zen To

    I installed new firmware (a story in itself) but since then creative software doesn't detect my player. It works fine through Real player (but slow) and Media player but I preferred the creative software. I have installed updated software but still the same. Not much joy as yet from Creative and I have tried troubleshooting which involves sync-ing with Windows media but it just froze most of the time and was incredibly slow. After rolling back Media player 0 I re-installed but same thing happened.Anyone have any ideas?

    I have had the same problem. I've tried to update the firmware and now thw PC software does nor recognise the zen. Tried everthing and in the process of seding it back to creative. Anyone any ideas. could be cheaper to buy something else that works longer than 4 months.

  • Can't detect Zen Micro Ph

    Hello!
    I have installed my Zen Micro Photo (on WinXP) like I should, but I can't find my Zen Micro Photo in "Zen MicroPhoto Media Explorer". What is wrong? First I installed the software, than I connected the player but still is says "Deviced Connected: 0".
    This is what I installed:
    - Creative Zen MicroPhoto
    - Media Toolbox
    - Creative MediaSource
    - Creative Removable Disc ManagerMessage Edited by lonni on 0-29-2005 04:03 PM

    does the micro say "docked" on it's if not then its not being dected by the computer, sometimes when this happens i open up windows media player 0 and i select the "sync" tab, windows will then check for an external hardware device (micro) and find the micro. It works everytime for me i'd give it a try. if you connect your micro and it tells you that there windows has found new hardware then the drivers arn't installed correctly.
    good luck
    black zen micro 5gig sony MRD-ex5's & 7's

  • Creative Mediasource doesn't detect zen to

    Hello,
    I have a Zen Touch and I have it for a year now but I had installed Creative mediasource a time ago again and now he doesn't find my mp3 player. But my Windows Media Player detects it and with WMP I can put music on my zen touch but not with CMS and I like to do it with CMS. I have installed all drivers and now I don't know what to do. Can anybody help?
    F-J

    What firmware version does the player have?

  • NOMAD Explorer doesn't detect Zen To

    I open NOMAD Explorer and it says not connected. I would really like to look at the files in my player and edit the tags and whatnot. I can still use the Windows Explorer thing to access the player. Any help on getting it to detect or anyone have another way to edit the files?

    Are you using the PlayForSure firmware(verson 2.xx.xx) for the Zen Touch player now? Nomad Explorer won't work with the new firmware. You can download the Zen Touch Media Explorer suite from the website and use that instead to replace the Nomad Explorer.
    Jason

  • Windows Vista doesn't detect Zen V P

    I'm hoping someone can help me with this problem. My laptop has Windows Vista on it, but it will not detect my Zen V Plus when I plus it in. My computer at work, which has Windows XP Professional, detects the player just fine.
    Thanks,
    Lauren

    Did you try to connect your device to Windows Media Player , under "Sync" Did you download and install all latest drivers and software (see below) ZEN V Plus and then Windows Vista 32-bit. http://us.creative.com/support/downl...ype=0&x=27&y=3

  • ZEN MICRO ERROR!!! HELP NEEDED

    Well, I bought a zen micro and couldn't have been happier until it started freezing at startup and all I see is the logo. The recovery mode doesn't seem to do squat for the player but it still shows up. I selected each one of the options on recovery mode individually and it says it's performing the intended task, but i come back hours later to find a bald kid with a blow dryer (no results). When starting up, I listened very carefully to the internall sounds the electronics were making; a repetiti've "wurr wurr wurr" that stops after about fifteen seconds of run time.
    ***ANOTHER THING*** ::: My PC doesn't detect the micro when plugged in via USB either... I suspected a firmware issue but I also need help going about all of THAT and everything else...
    Any information at all would be helpful. If you need specifics in order to provide me with a solution, I'll try the snot out of me to give it to you.
    It would be helpfull to have a direct "conversation" via a messenger if anyone wants to try that who might have a solution.
    Thanks! < AlexMessage Edited by Hougana on 0-6-2005 07:0 AM

    I had EXACTLY the same problem (including the noise that quits after 5 seconds).
    The HD in your ZM is kaput (*boom*). You have to send the player in to have it replaced. Depending on your warranty status, you might ot might not have to pay for that.
    Cheers,
    Jan.

  • +++Installing Zen Micro w/o Creative related software?

    I was wondering whether Win XP w/ SP2 is able to detect Zen Micro w/o its related software? I would like to use only WMP0 to transfer my songs.....

    Kelly,
    I have installed the MTP software as well and it does transfer te playlists from WMP to the Zen Micro. The only problems I have had with the new firmware have not been firmware or Creative related but rather WMP related. It seems to be very picky about what it will transfer if you have it set to automatically convert to WMA-64 to save space. It gets hung up on some files during conversion or takes an unspecified error and skips the file to go to the next. What I actually have ended up doing is loading up MediaSource again without drivers for the player and used it to convert the files I wanted to WMA and then pointed WMP at that folder and it transfers them and the playlists fine. Now that I have read this post I will try Real's player as well to see how it works with it. This has only been a slight frustration though because I am trying to maintain the files in their original format and just conver the ones I am loading now. My wife owns an iPod and can load plenty of files in the higher bit rate that I ripped them off our cds in.Message Edited by AspenWiedii on 0-09-2005 07:09 AM

  • Zen micro software - sort

    I'm uploading large files, including only digets in them, for example
    00
    023
    03
    033
    why doesn't the zen micro software sort them automaticly?
    Message Edited by Catherina-CL on 06-06-2006 02:22 PM

    I have renamed the thread so the title is more descripti've (and not flaming).
    Can you be more specific, with regards to your question? Are they music tracks, and you want them sorted in order? If they have the same album name they will be listed together, just make sure the song number is in the ID3 tag aswell.
    Cat

  • Zen Micro Photo: PC doesn't detect dev

    I just bought two Zen Micro Photos. On my PC, I downloaded the latest driver without installing any of the software that comes with the device. I plugged it into my PC, and it detected it immediately. No problems.
    On my wife's PC, I downloaded the latest driver and installed all of the software. The PC will recognize that a USB 2.0 device has been plugged in, but it will not recognize it as an MP3 player. I have searched these forums and tried various suggestions (like pointing the New Hardware wizard to C:\Program Files\Creative\Jukebox 3 Drivers), but everything turns out the same: the PC cannot install the hardware.
    I plugged her Micro into my PC and it works as expected.
    When plugged in, her Micro does *not* show the docked screen.
    Both PCs are Windows XP SP2.
    Can anyone help?

    Nevermind, I found where to figure that out. Looks like her PC doesn' t have SP2.
    I'm downloading it now, and I'll be back if I run into any more issues.
    Thanks for pointing me in the right direction.

  • Zen micro photo won't start & not detected anym

    hello!?my zen micro photo started acting weirdly lately: even when the player's battery was fully charged, the player would shut itself down automatically a second or two after being turned on. i managed to access the recovery options and do a cleanup, but the problem was not solved. after, it started telling me that the battery was empty even after being charged for hours on my computer. (and the battery is only a year old or so). then?a few hours later, it even failed to turn on at all, and has stayed like that since. i could at least access the recovery console, so i tried formatting the dri've, but there was no improvement. i then tried to use the recovery utility found on your website, which updated the firmware to version 2.3 however, there was no difference, and the player still doesn't work. finally, my computer won't even detect the player anymore (although i have made no changes to the computer's configuration), and it won't even charge it, since it is not detected. (the player doesn't show any sign when it is plugged) so now, all i can get from the mp3 player is a "low battery" warning, and only when i try to access the recovery console (otherwise, nothing happens). any ideas?thank you !

    just an update:i tried the "caveman repair method" (http://forums.creative.com/creativel...cending&page=3)and it ... worked... partially...at least the player now boots, although only to display a low battery warning...BUT as soon as i plug it to my computer, it crashesand i already tried the rear usb ports, no better, as well as 3 different computers, no improvment neithersooooo... anything else?maybe roasting it next time would help lol

  • Zen Micro is detected by Creative MediaSource Organizer or Windows Media Pla

    <SPAN>Well, I have read through a good part of the message forum and have found nothing to help my case and I believe, truly believe that I have tried everything!
    <SPAN>
    <SPAN>My Zen Micro is detected by my computer and when plugged in I am prompted by MTP Media Player to
    <SPAN>Launch Windows Media Player and synchronize files </LI>
    <SPAN>Take no action</LI>
    <SPAN>
    <SPAN>If choose to launch Windows Media Player it does not detect the portable device
    <SPAN>If I choose to take no action and launch Creative MediaSource Organizer instead, the device is still not detected.
    <SPAN>
    <SPAN>I have checked my Device Manager and it says that the device is working properly, drivers are installed (this is the most common problem ? but for me this is the part that is working correctly).
    <SPAN>
    <SPAN>When I open the Zen Micro Media Explorer it tells me that the device is not connected.<SPAN> <SPAN>I cannot transfer music files with Windows Media Player or Creative MediaSource because both programs do not detect the Zen Micro.
    <SPAN>
    <SPAN>I should note that the Zen Micro does work properly on another computer in my household.
    <SPAN>
    <SPAN>Can someone please offer suggestions?
    <SPAN>Thanks

    Strange that WMP doesn't detect it, presumably you have v0? Worth checking the link "problems with connecting using MTP firmware" in the FAQ post and installing the hot fixes.
    Also make sure you have the latest software with MTP updates, by downloading and installing the following:
    . Creative MediaSource Player/Organizer 3.30.2
    2. Creative MediaSource Plugin for PlaysForSure devices
    3. Creative Zen Micro Media Explorer Web Update
    Before installing connect the player to the PC. Then install 2 and 3 (the player must be connected for to verify you have a Creative product).

  • Zen Micro "not detect

    The software and drivers installation seems fine but my laptop doesn't seem to detect the new shiny Zen Micro (5Gb) when i plugged it in. (I'm using a BenQ 500G .6Ghz Centrino laptop with Windows XP SP2 installed). I tried plugging it in on another laptop, a clean install of Windows XP and ME, changing the USB cable still the problem persist. I noticed that I can't get the battery to be fully charged either. The battery indicator either shows a single or two bar only (even after more than 3 hours of charging). Has anyone had any issues with the batteries? I know some folks has had problems with the connection too.. Please advice. Thanks!

    I already did. The shop had problem testing a couple of new Zen Micros on their machine as well. I guess I'd save a couple of potential owners the agony of trying to have their player workin. The salesgirl couldn't stop saying how sorry she was and was kind enough to help me with the problem. Now that's good customer service! Otherwise if the shop still can't help me with the problem, Creative HQ in Singapore is just a walk away from my home. I would sure be banging on their door!
    Anyways I guess Creative must have some bad production batch in stores so folks make sure you have the shop test them for you before you finalize the sale. That would have help me I guess.
    I have to say the problems I faced did not diminish the fact that the Zen Micro is indeed an excellent MP3 Player. So any of you who have intentions of getting one go get it. This is a support forum so you'll see only the "bad" stuff!

  • Creative zen micro not beeing detected, I need help, ple

    It doesn't detect, I plug it in, it turns on but Im not able to put songs in to it or anything, I open the software and it isn't there.
    This is the 5 gb one, any suggestions would be apreciated.

    I've got exactly the same problem, it comes up on my 5BG zen micro that i have a firmware problem but i cannot update the firmware because my computer doesn't detect it. Someone please help! I don't know what to do next.

Maybe you are looking for

  • How to Count number of rows

    Hi All If I have 2 tables with records in it, with primary Table A and Foreign key Table B structure.Then how to count the no of occurances of each records of table A in table B and print the values. Thanx

  • ICloud email (Migrated from .Mac MobileMe) no longer works on older device (iOS 4.2.1)

    Hi there. Here is my question/concern. I just migrated to iCloud from MobileMe (with the same Apple ID/email I have had since it was the free iTools.com years ago). Aside from the general up and down connectivity most people are experiencing (I am su

  • DEFAULT WINDOW SIZE IN 45B

    Hi, I am trying to determine the line a condition type is on to be able to delete that line in a pricing screen.  I am on 45b and DEFSIZE in the function CALL TRANSACTION is not available to me.  Please help.  I call a screen to get the number of scr

  • Site not working in IE, fine in Firefox

    It took me forever to get some issues resolved with Captivate/Flash and get my site working correctly. I use Firefox and didn't think to check IE. I called the client and he has IE and said there was nothing there, much to my shock. Everything shows

  • Returnable packaging - vendor related

    Hello SAP Gurus, In my current project, I meet following situations regarding vendor related returnable packaging: 1. Packaging belongs to vendor; 2. Packaging belongs to us (purchaser); 3. Packaging is rent by us (purchaser). Our current solution is