PC fails to reboot and shows blank screen after automatic windows updates including SP

Pavilion- a1130n" WINXP ProfessionalC fails to reboot and shows blank screen after automatic install ing windows updates including SP 3

I would love to say that a refresh worked for me however it did not.It takes about 30 Minutes total I was able to trace part of the issue to a Registry Key that was tagging the processor. Because my BIOS manages its own temp gauge and windows is trying to
build on in I had to turn the BIOS one off as well as for some reason I get better funtionality with Visualization off.
I am still dealing with a lag but I was able to get ride of the freeze that made the computer completely useless.

Similar Messages

Hp Pvillion G6 2005ax with AMD Quad Core is showing blank Screen after latest BIOS Update

Hi
I have strange issue after the Hp Software Update. Recently i have connected to High Speed internet and Hp Asistant shown a Bios update for my System and i chose download. after that my Hp Pvillion G6 2005ax with AMD Quad Core is showing blank Screen and Caps Lock button Blinks Randomly and F12 Button also on. Kindly Suggest a Solution for this. I have been irritated by Hp Customer Care support.
My Mobile No. [Personal Information Removed]
Email ID is [Personal Information Removed]
for any help you can send or i am availbale on above contact address.

Hello , Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I read your post about the BIOS, and wanted to assist you! The blank screen and blinking of your Caps Lock, is the system trying to give you the error code for the issue your notebook is having. You can review the following document for further assistance, if needed:HP Notebook PCs - Computer Does Not Start and Emits an LED or Beep Code Please note the blinking sequence of your Caps Lock, and follow the instructions in the document above. From the information that you provided, it is possible that the blink code will be related to a BIOS error. You can always try performing a System Restore, to set the notebook back to a previous working point. You can also try checking this site for BIOS drivers. Once there, you can select your Operating System and click "Update", you should be able to access and download the BIOS drivers. If you downloaded the latest driver from that site, try uninstalling the driver and installing the previous version. Please let me know if this information was helpful by clicking the thumbs up below.
Have a great weekend!

IE 11 links open to Blank page after last Window update

IE 11 links open to Blank page after last Window update, I tried every trouble shooting and suggestions I could find in all forums but to no avail.
Operating system Win 8.
will try any suggestions and report back.

Hi,
Not sure whether you have tried these methods, if yes, keep trying the others.
1.Run IE with no add-ons firstly.
Click Start -> All Programs -> Accessories -> System Tools -> Internet Explorer (with no add-ons).
If works, please follow the steps to narrow down which add-on cause the issue.
Start IE>Press Alt to show the menu bar>On the Tools menu, click manage add-ons>under show, click All add-ons>disable half add-ons one time for quick narrow down>restart IE.
2.Try resetting IE.
Start IE>Press Alt to show the menu bar>On the Tools menu, click Internet options>Advance>Reset>restart IE.
3. This is caused due to some registry problems occurred. To resolve this issue, follow the below steps:
Click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
Type regsvr32 actxprxy.dll in the Open box, and then click OK.
If the command was successfully executed, you will receive the message ‘DllRegisterServer in actxprxy.dll succeeded’ window.
Restart the Internet Explorer
4.if still not work, run system restore.
Start>type system restore in the search box>click system restore>follow the steps in the wizard to choose a restore point.
For more information, please see:
Nothing happens when you click a link in Internet Explorer
http://support.microsoft.com/kb/175775/en-us#method4
Hope this helps,
Ada Liu
TechNet Community Support

I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion 6.0.1 maxVersion 6.0.1

I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion >6.0.1 maxVersion <6.0.1

If you use ZoneAlarm Extreme Security then try to disable Virtualization.
Do a clean reinstall and delete the Firefox program folder.
* http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/869812]]
*[[/questions/869951]]

Blank screen after display driver update Satellite Pro P200

I installed the latest ATI Mobility Radeon HD2600 display driver (8.432, from the Toshiba site via Tempo) on my Satellite Pro P200 yesterday. On rebooting everything looks fine as far as the Windows Vista Business "Please wait ..." screen, but instead of displaying the login page I get a blank screen (with a mouse cursor that moves around as normal). All I can do at this point is power off, and I've run out of ideas on how to get any further.
Things I've tried:
# booting into safe mode, low-resolution video or last known good configuration all result in the same blank screen.
# connecting to the system using remote desktop (to disable the driver) isn't possible because the system hasn't loaded the network drivers yet.
# I can't revert to a restore point because Vista can't find any (I made a manual one after installing windows updates on a couple of days ago).
I can run a command prompt from the system recovery options and would prefer to use that to disable the driver +if+ I knew how before resorting to the more drastic options.
A web search (http://www.google.co.uk/search?q=ati+catalyst+vista+blank+screen&hl=en&sa= N) reveals that this has happened on a wide range of laptops with
previous releases of the driver, but none of the links I've looked at give a solution that's available to me.

No joy with an external screen so I bit the bullet and reinstalled from the product recovery disk. I tried expert mode to retain the data partition but that failed twice, so I had to restore it from the previous day's backup after doing a full reinstall. Two consolations, though.
# It allowed me to increase the size of the data partition.
# The display driver update worked fine on the fresh install.
Needless to say I've since found [http://support.microsoft.com/kb/927525] which describes how you can disable a problem device driver (atikmdag in my case) from the system recovery command prompt :-(
Hopefully the instructions in there will help anybody who gets caught with similar problems.

Blank Screen After Today's Updates

I was thrilled to see the new kernel and intel drivers show up in today's updates, but after rebooting, I have a blank screen on my E6410 laptop, which has Intel graphics. The Dell logo comes up, then the Grub menu, and then the screen goes blank. It was working perfectly fine before the update. Did anyone else run across this?
Last edited by jlacroix (2010-11-26 04:14:51)

Same problem here. How do you downgrade anything or change any settings when the screen just goes blank right at the start?
edit: I'll share some more for good measure. I'm on an nvidia gfx so it shouldn't be Intel-related. The system actually seems to be booting since I can log in and sudo reboot in the dark to prompt a reboot, which means I could technically try and fix this without seeing any output. That just seems dumb, though.
edit2: Removing vga=773 from the kernel line at boot at least restores cli visibility. startx returns "no screens found" so I'll try a downgrade.
edit3: Downgrading to 2.35, along with downgrading nvidia & nvidia-utils to 256-something as well as ndiswrapper and tiacx finally got me back to where I need to be with X working fine.
Last edited by cake (2010-11-27 13:42:20)

Blank screen after trying to update vista to windows 7 on dv7-1103ea

Hp pavilion dv7-1103ea laptop

Hello monya1112, welcome to the HP Forums.
It appears that you were updating from Windows vista to Windows 7 on your notebook, that now you have a blank screen. I will try to assist you with this.
When turning on the notebook, is the screen blank yet everything on?
If so you may want to start with this document:
Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
Let me know how this goes for you, thank you for posting on the HP Forums.
I worked on behalf of HP.

Blue screen after installing windows update

I get this error message after I install the windows updates. I have the K8n Neo Platinum with Nvidia Nforce 3 250gb chipset. I am running XP X64. The computer runs great until I do the windows update. I have tried changing setting in the bios but that don't matter. Here are 3 pix. I had to take them quick so they aren't very good. I am right now re-formatting again so I am on my other computer.
OK how do you add pix from a digital camera on this forum??? ,
Here is what it says. stop: c000021a (fatal system error) this session manager initialization system process terminated unexpectedly with a status of 0xc0000263 (0x00000000 0x00000000) the system has been shut down.
It then goes into a reboot mode and comes back with the same blue screen error code.
Help

I e-mailed MSI tech support today also about the problem. A month ago I did the same thing. The tech said "oh I haven't heard of that happening before" So thanks for the link. I can't wait to get the "haven't had that happen before" DUUHHHH again. I will just link them. A month ago I wrote went through about 10 of the updates. Doing a re-install, updating and see what happens. I wrote down a couple of them that cause problems. It was just way to much work to time consuming so I just stopped.
I don't quite understand that voltage thing with the processor. I would think you should be able to set the bios to "fail safe setting" and it should run and do everything.
It don't look like they posted a fix for this problem. But I didn't install any of the security updates anyways. I wonder if it is just my Motherboard or what. There must be someone out there who is running x64 with one of these boards.
thanks again.

IMacs blue screen after recent Windows Update!!

Hi,
Our iMacs running XP-Pro did a recent round of Windows Updates 9/2. They are all blue screening Pagefaultin non-paged area, win32k.sys problem.
System Restore does not work
Can only boot to Safe Mode
Tried Last Known Good configuration (worked on some)
Has anyone else seen this and has a fix?
Thanks

I have seen this problem on a bunch of iMacs running bootcamp at multiple sites. The issue is definetly a mixture of ATI graphics cards and a recent windows update (I have not been able to identify which one). The fix has been simple though.
1. Reboot the iMac
2. Hold down the Option(alt) key
3. Select Windows partition
4. Quicky tap the F8 key after the partition selection
5. Select Enable VGA mode
6. Install BootCamp 3.0 drivers.
7. Reboot
That should do it. I have fixed about 20 macs this way, no fuss, plus the newer drivers add a whole bunch of enhancements to the iMac running XP.

Blue Screen after recent Windows Updates

Hi,
Our iMacs running XP-Pro did a recent round of Windows Updates 9/2. They are all blue screening Pagefaultin non-paged area, win32k.sys problem.
System Restore does not work
Can onlt boot to Safe Mode
Tried Last Known Good configuration (worked on some)
Has anyone else seen this and has a fit?
Thanks

I have seen this problem on a bunch of iMacs running bootcamp at multiple sites. The issue is definetly a mixture of ATI graphics cards and a recent windows update (I have not been able to identify which one). The fix has been simple though.
1. Reboot the iMac
2. Hold down the Option(alt) key
3. Select Windows partition
4. Quicky tap the F8 key after the partition selection
5. Select Enable VGA mode
6. Install BootCamp 3.0 drivers.
7. Reboot
That should do it. I have fixed about 20 macs this way, no fuss, plus the newer drivers add a whole bunch of enhancements to the iMac running XP.

Mail showing blank screen after iOS 8.2 upgrade

after upgading to iOS 8.2 today, my mail is showing what seems to be a blank gmail screen, then goes dark, then transparent. Not able to get any email. Tried deleting gmail account, still getting same screen.

Hey Markwoody,
Wow! That definitely sounds frustrating, but good job so far isolating and troubleshooting the issue. We have a few more steps that we can try in an attempt to resolve this issue:
First, it sounds like you have tried restarting your phone. Let’s try a reset instead:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
https://support.apple.com/en-us/ht201559
How to reset
- You should reset your device as a last resort and only if you can't restart it.
- To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
If the issue persists, we’ll want to restore your device to factory settings and test once more. You can backup your device, but be sure to restore it as new first for isolation purposes, as restoring a backup can sometimes restore the same issues that you were experiencing before.
Use iTunes to restore your iOS device to factory settings - Apple Support
http://support.apple.com/en-us/HT201252
Thanks,
Matt M.

IPhone 3GS shows blank screen after OS5 installation

Hello,
After the installation of the new OS 5 on my 3 GS everything seems to work fine. I am just facing the following problem:
- When I turn on the iPhone i often see a blank, white screen. The touchpad is not responding. I have to press the ON/OFF button a few times to get the "normal" unlock screen.
- The same behaviour happend when I received a call. I just saw a white sceen and was not able to awnser the call (no button available).
Has anyone had the same problem?
Regards,
Tobias

If basic troubleshooting fails to resolve, it's time for a trip to the Genius bar.

Sent Items Folder Showing Blank Messages After Installing Exchange Update Rollup

Hi all,
Over the weekend I installed Update Rollup 8 on my Exchange 2010 SP2 servers. Some users today have reported that their "Sent Items" folders in Outlook 2007 are either showing up as empty or populated with "Blank" items (depending
on how the fields are sorted).
If they login to OWA their items are all there.
The only commonality I can find between the people experiencing this issue thus-far is that they aren't using "Offline Mode" (which they should be, so I have been the support desk enabling it for the people calling in), but I am kind of curious
as to why this may have happened. Does anyone have any insight they can share here?
Additionally, I have found the "outlook.exe /cleanviews" command which may help as well (have yet to try it on anyone's system where the problem exists), but it would be nice to know what the culprit may be.
Thanks in advance!

Hi Niko,
Thanks for your reply.
As I mentioned in my original thread, I have not used the /cleanviews switch yet, as each person who has experienced the issue has had it resolved by enabling Offline Mode (weren't in Offline Mode to begin with).
Additionally, I have found that this issue has been around since UR 6 (see the comments section):
http://blogs.technet.com/b/exchange/archive/2013/02/12/released-update-rollup-6-for-exchange-server-2010-sp2-and-exchange-2007-sp3-ru10.aspx
There are also some other threads on here where people have had similar issues that were either resolved by going Offline mode, running the /cleanviews switch, or completely removing UR 6 (like this one:
http://social.technet.microsoft.com/Forums/exchange/en-US/211b662f-c5e6-4233-86b3-aaf7dd9408c5/outlook-sent-folder-all-email-items-missing?forum=outlook).
Unfortunately, as is my understanding, Microsoft isn't doing any new updates (other than security fixes) for SP2, which I'm stuck on at the moment until I remove an old archive program from my network.
So now I'm just curious as to if there may be a QFE or fix for this issue. I'll place a call to support if necessary, but I will need to grab some screenshots of users' Outlook that may still be experiencing this first.

Blank screen after loading Creative Cloud?

When I try to run the file, 'Launching creative Cloud does not finish installing and a blank screen appears. (Windows 7) I have tried uninstall/reinstall, I have tried removing the OOBE file step by step, neither of which have helped. Suggestions? I've now lost a day of my 'free trial.'

I have Windows 7 Premium, but maybe this will help with your Windows 8.
I've tried all the following solutions in many posts to no avail, except for creating new windows account. New account was the only way for it to work and I did not want that.
I finally figured out the root of all evil. The ampersand in Windows user folder name (not the Windows displayed user name).
If you have ampersand (&) or other non-alphabet characters in windows user folder name (Example: C:\Users\Bob & Mary), then Flash Builder will fail to install (happened to me), Creative Cloud will display white screen, and/or other miscellaneous problems.
I confirmed this to be true and works:
1) I had blank Creative Cloud window as shown in the first post.
2) I renamed the display username and window user folder name by doing the instructions here:
http://www.ghacks.net/2011/03/28/how-to-change-a-windows-account-name-and-user-profile-fol der-name/
(Example: Change from "Bob & Mary" to "Bob n Mary" - without the quotes)
3) After logging back in my newly renamed account, I opened Creative Cloud and login interface shows up! :-)

MacBook Pro continues to reboot then shows main screen with flickering green and white lines then restarts again what the heck is wrong with it?!

MacBook Pro continues to reboot then shows main screen with flickering green and white lines then restarts again what the heck is wrong with it?!

Sorry we can't assist with that, you'll have to take it to Apple.
If it's not worth fixing then you may be interested in this User tip
My computer is not working, is my personal data lost?

PC fails to reboot and shows blank screen after automatic windows updates including SP

Similar Messages

Maybe you are looking for