PC FORMATTED iPod read by MAC & PC? MAC formatted iPod read only by MAC?

Is this how the formatting issue works? I'm looking to buy an iPod for a friend who (I think) has PC.....
Since I'm a mac person, I want to buy the gift, load some music on, and ship it off to the lucky recipient....but if they have a PC , will it be recongnized once it's plugged in?
Any info would be helpful.
Thanks.

PC FORMATTED iPod read by MAC & PC? MAC formatted iPod read only by MAC? Is this how the formatting issue works?
Yes, that is how it works.
Since I'm a mac person, I want to buy the gift, load some music on, and ship it off to the lucky recipient....but if they have a PC , will it be recongnized once it's plugged in?
Okay, unless you restore your iPod while you're on the Mac, I believe it will still be formatted for a PC.
(You will not need to restore the iPod for transferring music to it on a Mac unless you want to upgrade the iPod's firmware on a Mac computer, then it will have to be Mac-formatted).
You see, when you recieve an iPod, it is shipped to you as a Windows-formatted iPod, probably since the majority of the population has PCs, and also, PC-formatted iPods are compatible for music transfer for a Mac also.
Does that make sense?
EDIT: Zevoneer has already answered your question, so you can ignore all of my post if you wish.
-Kylene

Similar Messages

I have connect a seagate HDD formated on NTFS to my macbook pro with Mac OS 10.7 but my HDD is read only any idea how can i change it to read & write ?

i have connect a seagate HDD formated on NTFS to my macbook pro with Mac OS 10.7 but my HDD is read only
any idea how can i change it to read & write ?

i tried the trial version of tuxera and it gives me the possibility to read & write , Thanx fschweig.
@ Samberl : what is the benifts of keeping my drives on mac format and this SW mediafour i install on my PC to let it write the mac formated HDD ?
is it free ?
all the best
Adiab

I have an external hardrive for MAC, I needed to save something from my work computer so I can pass it on to my MAC, it requiered me to re-format my external HD and now when I connected to my MAC I only have "read only rights". How do I fix it?

I have an external hardrive for MAC, I needed to save something from my work computer so I can pass it on to my MAC, it requiered me to re-format my external HD and now when I connected to my MAC I only have "read only rights". How do I fix it? I run my Itnues from this external and now my library is gone. Luckily I have it saved somewhere else, which is not a problem, but I won't be able to write to this HD for right now. I can't see an option to give those permission back.

cptjuanjvarona wrote:
I have an external hardrive for MAC, I needed to save something from my work computer so I can pass it on to my MAC, it requiered me to re-format my external HD and now when I connected to my MAC I only have "read only rights". How do I fix it?...
Unless what you have to transfer is enormous, skip the external HD altogether and use a USB flash drive; you can get them with capacities to 128GB. Format the flash drive as FAT32 or ExFAT as LowLuster suggests so it can be read and written to on both PC's and your Mac.

External drive is suddenly read-only, yet is formatted for Mac

I've had a 1TB external hard drive for the last year and never had a problem with it until now. Suddenly, it is showing as read-only, however, it's formatted for Mac. How am I able to fix this? Do I have to re-format it?

Usually that means the drive is malfunctioning. Back up all data on it, if you haven't already done so, then erase and restore. If you ever have another problem with the drive, replace it.

HT2963 I have a 1 TG external drive that is formatted to Windows NTFS and is read only, how do i get it to read and write on my Mac OS X 10.6.3?

I I have a 1 TG external drive that is formatted to Windows NTFS and is read only, how do i get it to read and write on my Mac OS X 10.6.3?

Install software such as Paragon NTFS, or reformat it as Mac OS Extended (Journaled) or FAT32. Mac OS X 10.6.5 and newer can also read and write exFAT partitions.
(97498)

How can I interchange a Toshiba external drive with my Mac and Windows? It only works read only with the Mac.

I bought a Toshiba external drive IT and I can copy files to it from my Macbook Pro 5,3. I would like to know how canI interchange files with Windows and the Mac.

If the disk is read only, it is formatted for Windows and the Mac can't write to it
Reformat to FAT32
This will of course wipe all data so move it first
Allan

MS Windows "Custom Folders" appears as Read Only in Mac

Hi,
I'm new to Mac, and started copying my old PC data to an external drive, so I could access it in my MacBook, before reformating my PC.
I copied a lot of folders (around 100 Gb) and noted that some folders are "read only" in that external drive. I remembered my unix time checking for chmod/chwon attributes, but I didn't see anything different from read/write folders. I could note just one thing. This "read only folders" are folder that, in my PC, had "Custom Icons", or "Custom images" attached to it.
I tried a lot of chmod/chwon combinations, but Terminal always said I have no right (or something like that, I don't remember now), so I gave up and copied from "Shared Folders", FTP or "one by one", and now it appears to be Ok.
Does anyone already saw this issue? If yes, is there a way to "force" that folder to be read/write? I tried using Finder to Find folder/files that were readonly (so I could identify each one), but I din't find the option. Anyone knows how?
Thanks in advance.
Alessandro Fragnani

alefragnani wrote:
Hi,
The external drive is already formated in FAT32. Only my old PC is formated with NTFS, and the problem itself is while accessing theses files/folder in the external drive, not the PC (I'm not accessing the PC directly).
FAT32 file system can't handle unix permissions and any file on such a drive will be listed as having full read+write access for everyone. However, if a file is read only in windows, it will be locked in OS X and there is absolutely no way to unlock it from OS X side short of reformatting the drive. You need to log into windows and unlock or delte the file from there.

Why is external hard drive read-only on one Mac, but read/write on another?

I have a Seagate Backup Plus Portable Drive. I bought it to be compatible with both Windows and Mac, which it currently is. It works just fine on my PC and my MacBook. However, recently, I bought a MacBook Pro. The Seagate drive shows up as read only on the MacBook Pro, though it is read/write on my MacBook. It's formatted NTFS, yes, but it already works on my MacBook. What's going on here?

Nope, one of the selling points of the drive was that it came ready to work with both Mac and Windows (the product description says there is an NTFS drive installed for use on Mac). No hacking or installing on my part.
But I think I figured it out. Apparentely, Mavericks comes installed with something that does not allow it to write NTFS no matter what (well, unless you go through a whole bunch of technical stuff to rewrite the software). My old MacBook was Leopard.
I'll just reformat the external hard drive for Mac, and if I ever need to use it on a Windows, I'll install HFS+ Explorer on the Windows. Oh well.

I mounted my external hard drive to a pc and now I don't have edit or write permissions on my Mac (read only). How do I get them back without erasing the drive?

Hello all, I am a photographer and have my portfolio, edited and raw images backed up on a Seagate Free Agent External Hardrive. I mounted my external hard drive to a pc recently and now I don't have edit or write permissions to it on my Mac (read only). How do I get them back without erasing the drive and loosing my valuable work?

If you re-format it you will lose all the data on it!!!!! So make sure you have backed up the drive or moved all the data on it to another external HD or the internal HD on your iMac.
Below is an Apple Advice letter that explains how to format an external HD, it's written for Aperture but you can use the instructions to formate any external HD.
http://support.apple.com/kb/HT3509

External Hard Drive "read only" when connected to mac.

Hi
I have a Lacie external hard drive, formatted FAT, which has always worked fine on our macbook pro until the macs internal drive crashed and had to be replaced. now, when i connect the lacie i can access everything, but cannot move it around or add new folders, etc. under permissions it says "read only" how do i change this? when i connect to a pc it works normal.
the macs software is OS X Version 10.5.8.
im sure that its a really simple answer but i dont know enough about mac to find it...

NTFS is read only on OS X. there are drivers to make it writable, so you could try to get those to work or you can copy the data off & reformat to FAT 32.
if you want to try the drivers: http://www.macupdate.com/info.php/id/24481
reformatting the drive: http://cnettv.cnet.com/8301-13415_53-10286826-11.html

My External Hard Drive shows Read only in mac but in windows its not

when I connect my WD HDD External to my mac book it shows that Ur EXT HDD is right protect and read ONLY, but when I switch to the windows os U can copy delete and any thing U want, how can I remove this issue from my HDD ? I want to copy to the HDD in mac but I cant

Your external HD is formatted with the NTFS file system. OS X can read but not write to the NTFS file system.
To be compatible with OS X and Windows it would need to be formatted with the FAT32 file system.
Alternately you can install a 3rd party driver to give OS X the ability to write to the NTFS file system. One of them is
http://www.apple.com/downloads/macosx/system_disk_utilities/ntfs3g.html
I don't know how well it works.
There are other drivers available.

Does ipod touch only work with wi-fi? Can I download games through home mac?

Does ipod touch only work with wi-fi? Can I download games through home mac?

iPod touch is Wi-Fi only, yes. I'm not sure exactly what you mean by games from home Mac, but you can purchase game apps in iTunes and sync them to your iPod.
Merry Christmas.

I need help Syncing my ipod to my mac. It has music on the mac currently but I want both my ipod music and the mac music together but it says i have to delete my ipod and only have the Laptop music on it. is there anyway to have both?

I need help Syncing my ipod to my mac. It has music on the mac currently but I want both my ipod music and the mac music together but it says i have to delete my ipod and only have the Laptop music on it. is there anyway to have both?

I got a Mac and started buying music on it, and My PC has all of my whole Itunes library which is like 1000+. Well I want to put all of my music on my Mac, But everytime I plug it in and ask it to sync all music it tells me that I have to erase my Ipod and sync in with the music on my Mac... Gosh its so confusing.

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
Thanks

Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium

My windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

my windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

All Office applications will also try to open a temporary work file in the same location as the source file. This implies the source file directory also needs to be writable for this temporary file. Since the default HFS+ driver provides only read-only access, such temporary files will fail to open, and will cause the application to fail.
As a test copy the file you want to edit, say an Excel spreadsheet from the OSX file system to the C: drive on the Windows side and try to open it. If you look in this directory, you should see two files, the source and a temporary file. You may have to force the temporary file to be opened on a read-write file system, by manipulating the folder for temporary files.

PC FORMATTED iPod read by MAC & PC? MAC formatted iPod read only by MAC?

Similar Messages

Maybe you are looking for