PC getting canceled......How to fix it ?

Hi friends,
One of the Local PC Chain in a Meata Chain is getting canceled some times. So no processes are running inside this PC. How to fix this ???
Thanks
Murthy

Hellow friends,
thanks for ur replies.But not answered my question exactly.
Here , one of the local PC is getting canceled. So in the error logs, it is not displaying this PC at all. As Main PC is running sucesfully, so it is showing no logs.But i would like to know the reason for canceling the PC. Soi am not able to find out where to see ....
Secondly, As this PC is cacelling , the processes under this PC are not at all starting...so there is no chace of viewing log details correspoding to these jobs.
Thanks ,
Murthy

Similar Messages

EA6500 getting 10mbs, cable router is getting 60mbs how to fix?

Ok, I have tried everthing i can thing of.
switched cables, all cat5E
tested modem on different computer wired getting 55-60mbs
speed test on router is only 10mbs as is on computers when connected to router.
reset rounter many many times.
updated frrmware.
tested with and with out media Prio.
bought another router, same results.
At a loss. Help

I recommend:
If IPv6 isn't required by your ISP; Connectivity => Internet Settings => IPv6 => Edit => Uncheck Enable
Media Prioritization => Enable => Check
Media Prioritization => Settings and apply accurate Downstream and if available Upstream values; Initially keep all devices and Apps normal prioritiy
Enable WMM Support
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Migration assistant ALWAYS gets stuck, how to fix?

I have been having perpetual troubles with the migration assistant. It always gets stuck on the final stage of transferring. This has happened with my previous transfer attempts and now is happening again as I try to transfer from 17 inch 2.3 ghz MBP to a 17 inch 2.4 ghz mbp.
When I first tried to transfer everything over, it got stuck on "transferring network and other settings". The progress bar looks about 99% done. But it sits there FOR-E-VER and NEVER finishes. So I erased and reinstalled os x fresh on the destination computer, and tried all over again without selecting network settings to transfer. Now it has been having less than 1 minute remaining "transferring files to support applications" for over an hour now.
The same thing happened last time I migrated from a powerbook G4 to a mbp 17 inch. What is going on?????
The migration assistant seems to be a piece of junk.

The Migration Assistant is known (by users of this board) to be problematic between PowerPC and Intel. If you succeeded the first time, it may be the problems the second go around even though they are between Intel Macs, is from any Rosetta applications and plugins installed on your older Intel Mac.
Here's the user tip Kappy and I wrote about migrating between platforms:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=1872713

Prevoius Reconciliation is not getting cancelled

Hi Expert s
To one of my client My Previous Reconciliation is not getting Cancelled how can we sort out this Issue .please do needful on this as it is very urgent and revert ASAP
Regards
Jenny

Hi,
Which type of reconciliation is not able to be cancelled?
What is the error which is appearing when you are trying to cancel the reconciliation?
If you goto Manage Previous Reconciliation > select the reconcilation number to be cancelled, are you getting the option of REDO? Have you checked whether the same helps your issue.
Kind Regards,
Jitin
SAP Business One Forum Team

JOB Getting Cancel

Hi ,
When any ABAP report is run as background in our server it is getting cancelled , How to resolve this issue ?

When i select that job and press job log it says
" <b>No job Log entries are available for the selected job</b> "
Every job is canceled if it run as background , And no job log is available for all the cancelled jobs.
The Entries are like this ...
      Status Colum has " Cancelled "
      Duration Column has " 0 seconds "
      Delay Coulmn has " 406 seconds "

HT1338 When trying to update my software, I get "an error occurred" message, and the update gets cancelled. How do I fix it?

When trying to update my software, I get "an error occurred" message, and the update gets cancelled. How can I fix this?

I have found other threads with this problem. The problem is that you are using your iTunes account on another user at the same time you want to update software. Just close iTunes from that user. See > https://discussions.apple.com/thread/4577180?start=0&tstart=0

Itunes update always fails during download - it gets to the last 3 mb or so and hangs until I cancel it. Any idea how to fix?

iTunes fails to update. During download, it gets to last (presunambly) package and hangs at last 3 Mb. I have left it for days, it won't complete. Any idea how to fix?

This is a common issue. Temporarily disable the Anti-Virus and Firewall software on the computer.

I have a samsung scx 4100 series and i just updated to mountain lion and now i keep getting a "filter failed" error, anyone have any suggestions as to how to fix it.

I have a samsung scx 4100 series and i just updated to mountain lion and now i keep getting a "filter failed" error, anyone have any suggestions as to how to fix it.

Hi again, when you clicked on Mountain Lion and Lion in the App Store you are telling the laptop to reinstall them both.
You may have allowed simutanious downloads checked at the bottom of the window, I don't know, but I expect Mountain Lion is downloading, so Lion is waiting for it to finish, so if you have Mountain Lion installed cancel both download's.
Cancell both downloads anyway.
Go to the apple logo , top left, click on it, then click on about this mac, a window will open telling you what's installed, Mountain Lion is OX 10 version 10.8.2 click on more info, to find out more, Lion will be OX10 version 10.7.4.
Only update were it say's check for updates, not download now.

TS1702 I cannot get the keyboard to come up on the ipad mini when in the citrix receiver. Has anyone ran into this and do you know how to fix it?

I cannot get the keyboard to come up on the ipad mini when in the citrix receiver. Has anyone ran into this and do you know how to fix it?

I am not familiar with Citrix Reciever but is it possible it is open or being used in another open app?
Try quitting all apps then try again.
Quit all apps: Double tap the Home button and swipe the app preview page up for each open app

Can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer. Does anyone have any advice on how to fix this issue?

After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer and .mac account. Does anyone have any advice on how to fix this issue?

Welcome to the Apple Community.
Which OS are you using.

My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?

My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?

Hello there philp_69,
If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Thank you for using Apple Support Communities.
All the very best,
Sterling

Hi. I get the following message when trying to update or install an application: "impossible to connect to iTunes store". Does anyone know how to fix this? Thanks!

Hi. I get the following message when trying to update or install an application: "impossible to connect to iTunes store". Does anyone know how to fix this? Thanks!

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

I get nothing but error messages, -"Your IMAP server wants to alert you to the following: 113 that mail is not available" or 364? there are hundreds stacked up.You must give answers to how to fix these when we do "search" add the error code number

I get nothing but error messages, -
"Your IMAP server wants to alert you to the following: 113 that mail is not available" or the same with: 364?
Now there are hundreds stacked up on my desktop.
I cannot find the answer anywhere. You need to give answers to how to fix these errors because when I "search" "error code" or the number there is NOTHING. NOTHING! Yet you give us these stupid error codes
then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft. How in the world can you give us ERROR codes without the explanation of what
to do or how to fix it. You need to add each error code number in your "search" then explain what it is and how to fix it. I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELP

Hi,
I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
If you find any unusual emails that cannot be read or sent, try deleting them to try again.
I also suggest you create a new profile to setup the IMAP account:
http://support.microsoft.com/kb/829918/en-us
Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
For the steps to setup an account in Outlook 2010, please refer to:
http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
I hope this helps.
Regards,
Melon Chen
TechNet Community Support

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

Did you already try these suggestions?
Check USB connections
Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
copied from Resolve specific iTunes update and restore errors

PC getting canceled......How to fix it ?

Similar Messages

Maybe you are looking for