PC has just died, so have ordered an mbp. Will word transfer, or do I have to buy word for Mac????

Hi.
My PC has finally died.......
Excitingly, have ordered a MBP.
My question is, will word documents transfer, or do I need to buy word for windows.
Nothing serious, just letters, invoices etc.
THANK YOU.

If you're accustomed to working with MS Office, you can purchase Office for Mac 2011 and your documents will open fine - albeit if different fonts were used there may be some reflow problems.
Before buying Office for Mac, you may want to try out two free alternatives - LibreOffice or OpenOffice. I don't use them as I use Office for Mac but either should be able to open your Word documents.
Clinton

Similar Messages

  • HT1661 My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy.  I need to access the dead drive on the MBP via a 2008 iMac. Best options?

    My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy.  I need to access the dead drive on the MBP via a 2008 iMac. Best options?
    I have ordered a 800 firewire to 800 firewire cable and am hoping to use the target mode option to copy files from the MBP.
    Is this possible?
    Hope so!
    Any advice and or help would be greatly appreciated.
    Many thanks,
    Neil

    Thanks Ogelthorpe.
    Just bought an enclosure to try that also.
    Hoping the MBP isn't really dead but just feigning death
    Fingers crossed.

  • X230 has just died!

    Hi I'm a x230 i5 w7 32bit owner and my one has just died! I love this laptop and its been faultless until last night.
    I'm no computer boffin so please play nicley....
    Here is what happend... the norton virus software got in a loop so when I press no as I didnt want to install unknown software it kept coming back. I swtiched user and it wasnt affecting the other acount, but go back into the admin acount I could get it out the loop until I press ok... install.... then everything closed and that was that. Doh
    So when power on it comes up with the Lenovo screen then black screen with a small flashing curser in the corner. I cant start in safe mode with f8, I can hit f1 and f12 to choose boot options.
    I have downloaded and writen a recovery (of the microsoft site) disk onto a usb with no luck, it starts then i can choose to boot from usb, somthings download but then it crashes at the end of the run comand instal line...
    I then tryed removing the solid stated hard drive, that seemed to make things worse and seemed the optons when f1 is pressed are gone.
    So I'm thinking maybe the optical hard drive is dead? from what was a virus of some sort? I dont know and I have no idea what my next step would be.
    Thanks!

    Hi Benypm,
    I am glad to know that the issue has been resolved, and regarding the drivers issue please provide me the MTM number of the system which will be at the back of the system on white sticker.
    And regarding the HDD space, I suggest you to perform the clean installation of Windows or you can use any 3rd party software to clean the disk space.
    Please click here to perform disk cleanup option.
    Hope this helps!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • While playing my albums in iTunes it has just started playing the first song but will not progress through the other songs on the album. Did I accidentally change setting or are other people having the same trouble? thanks

    While playing my albums in iTunes it has just started playing the first song but will not progress through the other songs on the album. Did I accidentally change setting or are other people having the same trouble? thanks

    Hi there Sing Me A Song,
    You may have changed the Up Next list in iTunes. Take a look at the article below for more information on the Up Next lists and how to edit it.
    iTunes 12 for Mac: Play songs
    -Griff W. 

  • I have a playlist that will not transfer from my Itunes on my laptop to my IPhone 4S during synching. Recommendations please!

    I have a playlist that will not transfer from my Itunes on my laptop to my IPhone 4S during synching. Recommendations please!

    Regular or smart?
    You may need to remove any references to Podcasts, e.g. use "Playlist is Music" instead of "Podcast is false".
    tt2

  • I have cs5 on my pc, can i buy cs6 for mac separately and keep both?

    I have cs5 on my pc, can i buy cs6 for mac separately and keep both?
    I have cs5 installed and activated on PC A and PC B.
    If I buy CS6, can I use that on my MAC C and MAC D while still being able to use the cs5 on my PC A and PC B, since mac and pc are two different platforms?
    Thank You!

    No. That would be against the letters and the legal spirit of the EULA and that aside it's not possible for technical reasons. Either you make a platform swap, in which case you will lose your PC licenses of course,  or you buy a second CS6 license for your Mac(s) and keep your CS5 on the PCs.
    Mylenium

  • My iPhone 3GS has just died

    I was listening to music on the iPod app when the phone just died. It had around 80% of battery as well so it's not that. I've tried resetting (holding down home and on/off button) but no luck. Any suggestions?

    The iOs 5.1 is a huge file that needs to be dowloaded when updating/restoring, your phone hasnt completed the update so its now in recovery mode. Look on the left of itunes, it should say downloads under the store section with a spinning wheel, click that and youll see the update file with a time remaining, wait for that download to finish then try the restore again  and it should work

  • I have just installed 10.7 Lion and get the following message when trying to open a Microsoft Office for Mac 2004 product "You can't open the application Microsoft Entourage because PowerPC applications are no longer supported." What needs to be done ?

    What needs to be done to regain my Microsoft Office for Mac suite that I lost when I installed Mac os 10.7.3 Lion upgrade?

    boyfromoz wrote:
    Shootist007 wrote:
    Or you could just wipe out Lion and restalled Snow Leopard. Then when you are in the market for a new computer, desktop of notebook, buy something other then Apple.
    why would you say things like that here? if you are a windows one then stay there. but you are not polite or helpful and if can't use Apple i wonder why you would come here to tell all about your sad story. I don't understand that it has nothing to do with question asked.
    I own, or should I say have owned, several Apple products. Including a new MBP.
    I also use Windows.
    I will say anything I like in an effort to help people overcome problems they are having with Mac's and computers in general.
    Being a Apple Fanboy is not required for membership on this forum or trying to help other Mac users.
    And just how is suggesting to remove Lion and to go back to Snow Leopard not helping the OP in his quest to make his already owned and paid for MS Office software work? If it is isn't broken stop trying to fix it. Snow Leopard is a fine OS. Lion is still in Beta, only Apple hasn't told anyone. And yes I run Lion on my new MBP but I also have a partition with Snow Leopard on it.
    Thank you and have a great day.

  • I cannot open my photoshop, its asking for a serial number. I do have one but it will not accept it. I've had this program for 5 years and this has never happened before.

    I cannot open my photoshop. Its asking me for a serial number, which I already have. However, it will not accept my serial number. I've had this program for 5 years and this has never happened.

    If your Creative Suite version is #3 through 6, you might try running the CS Cleaner Tools in preparation for a re-install.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    If you have a legacy version, it may be that the activation servers for your product are no longer available.
    Nancy O.

  • I have a new MacBook Air and have just installed Office 365. I would like to transfer the data I have in mac calendar and contacts to Outlook. Is this possible? If yes how.

    Is there a way to get Outlook to sync to the calendar and then to my phone (iphone4)?
    I also need the contact list to sync to the computer, but not ot my phone.
    Any assistance would be greatly appreciated.

    Yes I have received and answer. You cannot import your contacts or ical information into Outlook. You have to re-enter everything. It gets even worse.
    With the newer Mac's, you cannot sync your iphone with Outlook. There use to be a way of doing this, but if you are running Yosemite, you cannot, so in
    order to have the calendar information on your iphone and Outlook, you have to enter the information into both Outlook AND ical.

  • HT3748 since upgrading to Mountain Lion, my Mac Mail no longer works well w/exchange email; so, I have had to switch back to outlook. Now, how can I use outlook for mac's calendar and contacts with icloud?

    Since uprgading to Mountain Lion, my mac mail no longer works with my exchange email properly. I finally gave up and moved back to outlook for mac, but now my new issue is using outlook calendar and contacts with icloud; possible?

    Sorry but I'm really not to sure what I have. I'm not good with knowing my computer model. All I know is that its a MacBook running with Leopard. I got my computer last year so I suppose its fairly new. Is there a place on my computer where I can check to see what it is (sorry to be so dumb with my own mac)
    And everything else works fine. I love Safari. It's just my mail that doesn't work. Here's the message that pop up several times.
    "The MobileMe IMAP server “mail.mac.com” rejected the password for user “akcastaldo”
    Please re-enter your password, or cancel."
    The only problem here is, even though I enter my password it doesn't do anything. It makes that message go away for about 3-5 mins. After that it pops right back up. And I can't even go into my preference and change my email password. So I don't know what to do.

  • I have a macbook pro, OS V10.9.5; I've downloaded acrobat reader XI for Mac. computer won't read PDF files: says microsoft files no longer supported.  What's going on?  How to fix. RLD

    I have a macbook pro w/OS V10.9.5;  I've downloaded acrobat reader XI for mac (I've also installed Micrsort office XI for mac).  PDF files won't open for reading;  videos of granddaughter from daughter's iphone won't play...two separate problems.  Help!  Not very learned about computer semantics and processing functions.

    Regarding the USB, see if zapping the PRAM helps.
    Regarding your storage space check out the following: 
    HD Space Checkers:
    Disk Inventory X (FREE)
    WhatSize (SHAREWARE)
    OmniDiskSweeper (FREE)
    GrandPerspective (FREE - donation)
    Mac Performance Guide
    Slimming your hard drive
    ===============
    Quick fix How To Quickly Free Up Hard Drive Space on Mac OS
    http://www.youtube.com/watch?v=fO-mlLApEuk

  • Out of the blue, unable to open Word attachment in Mail with double click. Have to Right click, open with, select Microsoft Word. Am running Snow Leopard and Microsoft Office for Mac 08. Cheers

    Out of the blue, am unable to open Word attachments in Mail with the usual double click. (Get a longwinded error message)
    Need to right click, select open with, and select Microsoft Word. Have been using Microsoft Office for Mac 08 for years.
    I have reinstalled the Office software. A couple of tech people have been unable to fix it. Any suggestion?? debsuemy

    Please re-post in the Office for Mac Product Forums .

  • My BB has just Died - Please Help.. what can I do

    I have a blackberry curve 8520, for no reason it died.
    I tried to turn back on but nothing;
    I swapped over to another battery - I was able to get a red light and the blackberry screen flashed up but then disappeared then reappeared as if it was loading and then died.
    I tried again with the power cable plugged in and the new charge battery and nothing.
    The phone has not been dropped, in water, electric shocked 
    I m totally amazed, its 8 months old brought as a pay as you go.
    Is there anyway I can get this fixed or what could be the problem

    indor wrote:
    I have a blackberry curve 8520, for no reason it died.
    I tried to turn back on but nothing;
    I swapped over to another battery - I was able to get a red light and the blackberry screen flashed up but then disappeared then reappeared as if it was loading and then died.
    I tried again with the power cable plugged in and the new charge battery and nothing.
    The phone has not been dropped, in water, electric shocked 
    I m totally amazed, its 8 months old brought as a pay as you go.
    Is there anyway I can get this fixed or what could be the problem
    Hi indor,
    Reload your OS. Read this thread.
    How to update BlackBerry Device Software using BlackBerry Desktop Software for Windows
    Good luck!
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • Blackberry Z10 has just died!

    My Z10 phone just decided to die yesterday. I can't get it to switch on. The screen is completely blank. The only sign of life is that the red light comes on for a short period of time after I connect to my PC.
    However, my PC does not pick up the phone - it's as if it is just not there. I desperately need access as my calendar is on this phone. Can anyone help, please?

    It has for others I've helped... not all but many.
    So, rather than a battery pull, the next time hold down the up and down volume key about 30 seconds. What happens?
    Next time press the upper edge power button for 20-30 seconds... anything?
    And next, press ALL three: Volume up and down, and the top edge power key about 20-30 seconds.. anything?
    On each of these, do it while connected to the OEM wall outlet charger.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • Session Loader Exception

    Hi, I am trying to login to a server session in TopLink,I am getting this exception even with the oracle12.zip set in the class path. Has any one encountered the same problem before ? Exception is shown below. Local Exception Stack: Exception Descrip

  • Register-SPWorkflowService : The underlying connection was closed: An unexpected error occurred on a receive

    My Fellow SharePoint 2013 Engineers, For the past two days I have been struggling to setup the SharePoint 2013 Workflow Manager. After following the detailed steps provided by Harbar.net when I reach the final step to register the workflow service fo

  • Archive_schedule_job

    I am calling FM archive_schedule_job and these are my parameters:     CALL FUNCTION 'ARCHIVE_SCHEDULE_JOB'       EXPORTING         object              = 'IDOC'         jobtype             = 'DEL'         cleanup_job_table   = ' '         start_immedi

  • Problem with User Defined Second Selection Screen

    Hi Gurus,                    I have a problem with the selection  screen selections. My requirement is that , User when he selects a check box on the main selection screen ( which is 1000) then at the at-selection event, another screen (whose number

  • PSE 8 - metadata is reduced?

    The metadata shown by PSE 8 (Organiser, Properties) seems much reduced in comparison to PSE 5. It's no big deal, all of the essentials are there (I think. You don't miss something until you need it!). For instance PSE 5 showed GPS data (from memory).