PC Hierarchy & CC Hierarchy: Transport Request?
Experts,
Please tell,
Is transport request required for Profit Center Hierarchy/ Profit Center Group and Cost Center Hierarchy/ Cost Center Group?
or else we need to maintain them individualy in Development, Quality and Production servers?
- Nilesh
Hi Nilesh,
There are several ways by which profit center/cost center master data can be created/transported.
1. Export/Import the profit center/cost center groups using transaction KCH2/KSH2
2. Create LSMW for profit center/cost center master data and upload in DEV, QAS and PRD
3. Transport profit center/cost center master data using transactions 0KEQ and OKE6
4. Carrying out the entire excercise manually.
The decision of which way to do it completely depends on the amount of data to be transferred/transported. If amount of data is not much then manual route is preferable else LSMW/transport can be done. Also, kindly note that sequencing is important i.e. profit center master should be transported first followed by cost center master and hierarchies/groups should be created before master data is uploaded/created.
Hope this helps.
Rgds,
Dhawal M
Similar Messages
-
Hierarchy transport from developement to Quality?
Dear SDN,
Hierarchy transport from developement to Quality.
I have created one balance sheet Hierarchy on 0Account infoobject.
Could you please tell me how to transport hierarchy from development to Quality.
Waiting for response.
Thanks & Regards,
KiranHi Kiran,
Kiran Hierarchy data can be loade from source system, flat file or manually maintained in system.
since you have done manulally you can do the same in other systems also, but you need authrizations to maintain manually
I have manually created my balance sheet hierarchy using RSH1 transaction code.
you have do the same in quality also, since all required infoobjects are available in quality system, manulally create balance sheet hierarchy using RSH1 transaction code in Quality system.
check whether you have authorization to manually create in Quality system. you have to do the same procedure in production also i guess.
Regards
Daya Sagar -
Unable to capture the Data Source into a Transport Request
Hi All,
We have a product hierarchy and we are using the data source :4R_PRODH_D_LGEN_HIER for the hierarchy.
Now we need to transport this structure to the quality environment but we were not able to capture the datasource:4R_PRODH_D_LGEN_HIER into a transport request.
When ever we activate the data source:4R_PRODH_D_LGEN_HIER it is asking for the Package and the Transport Request Number.If we give these details and save it, data source is not getting captured in the request, only the "bject Directory Entry" is getting captured.
Can someone please guide me on how to capture the datasource under "Data Sources in BW" in a transport request.
Regards,
Sachin Dehey.Hi Sachin,
Hierarachy datasource is not captured as Attributes and Text Datasource. So what ever you have done is correct.
What ever is captured in Object Directory Entry is correct. So go ahead with your transports, once transport is done check the Hierarchy Infopackage with Available OLTP hierarchies and load the data.
Most important thing first see that the all Master & Transactional Datasources are transported in R/3 Dev to QA to PRD
In BW, datasources are not transported, only their replica is transported.
Transportation of Datasource is done in R/3. Only their replica is transported in BW.
So wht ever you have done till now is correct. So go ahead.
While attaching Hierarchy Datasource it is captured only in "Object Directory Entry"
Regards,
Vishnu. -
Error in FM DDIF_NAMETAB_GET when deleting BI objects via transport request
Dear all,
when importing a transport request in which several types of BI objects are deleted (Infocubes, DSO's, transformations, routines, DTP's, query elements, infosets, process chains). The import terminates only when transporting from acceptance to production with return code 12 due to an uncaught exception:
Transporting from development to acceptance did not raise this exception.
The ST22 dump (see below) refers in the "contents of system fields" section to a DSO, and to post-import activities. The DSO and the associated tables could not be found (rsa1 & se16), since they are deleted as desired.
Some of the relevant notes that I have found do refer to DSO related problems, but they all indicate to install SP19 which we already have installed (BW 7.0 Patch Level 23)
Could you please assist in pointing out potential solutions based on the information from the ST22 Runtime Error below?
Kind regards,
PJ
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_RS_PROGRAM_ERROR
Date and Time 08.02.2011 10:48:14
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_RS_PROGRAM_ERROR' was raised, but it was not caught anywhere
along the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_RSDD_DS====================CP' has to be
terminated.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RS_PROGRAM_ERROR', was not caught
and therefore caused a runtime error.
The reason for the exception is:
Error in BW: Error in DDIF_NAMETAB_GET
How to correct the error
If the error occurs in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RS_PROGRAM_ERROR"
"CL_RSDD_DS====================CP" or "CL_RSDD_DS====================CM001"
"APPEND_DS_TEC_FIELDS"
System environment
SAP-Release 700
Application server... "dp1ci"
Network address...... "<removed>"
Operating system..... "HP-UX"
Release.............. "B.11.23";
Hardware type........ "ia64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 45
Shortdump setting.... "full"
Database server... "spisap02"
Database type..... "ORACLE"
Database name..... "DP1"
Database user ID.. "SAPBIW"
Terminal................. " "
Char.set.... "C"
SAP kernel....... 700
created (date)... "Dec 14 2009 20:47:35"
create on........ "HP-UX B.11.23 U ia64"
Database version. "OCI_102 (10.2.0.1.0) "
Patch level. 236
Patch text.. " "
Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
SAP database version. 700
Operating system..... "HP-UX B.11";
Memory consumption
Roll.... 5979936
EM...... 0
Heap.... 1459888
Page.... 40960
MM Used. 6988880
MM Free. 415648
User and Transaction
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... " "
Transactions ID..... "4D5111661004210BE10000000AFA2502"
Program............. "CL_RSDD_DS====================CP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "CL_RSDD_DS====================CP" -
in "APPEND_DS_TEC_FIELDS".
The main program was "RDDEXECU ".
In the source code you have the termination point in line 61
of the (Include) program "CL_RSDD_DS====================CM001".
The program "CL_RSDD_DS====================CP" was started as a background job.
Job Name....... "RDDEXECL"
Job Initiator.. "DDIC"
Job Number..... 10475900
Source Code Extract
Line SourceCde
31 RAISE EXCEPTION TYPE cx_rs_program_error
32 EXPORTING
33 text = 'Invalid DSO subtype'. "#EC NOTEXT
34 ENDCASE.
35
36 * get table name from DDIC
37 CALL METHOD cl_rsd_odso=>get_tablnm
38 EXPORTING
39 i_odsobject = n_infoprov
40 i_tabt = l_tab
41 IMPORTING
42 e_tablnm = l_tablnm
43 EXCEPTIONS
44 OTHERS = 1.
45
46 IF sy-subrc <> 0.
47 RAISE EXCEPTION TYPE cx_rs_program_error
48 EXPORTING
49 text = 'Error in CL_RSD_ODSO=>get_Tablnm'. "#EC NOTEXT
50 ENDIF.
51
52 CALL FUNCTION 'DDIF_NAMETAB_GET'
53 EXPORTING
54 tabname = l_tablnm
55 TABLES
56 dfies_tab = l_t_comp
57 EXCEPTIONS
58 not_found = 1
59 OTHERS = 2.
60 IF sy-subrc <> 0.
>>>>> RAISE EXCEPTION TYPE cx_rs_program_error
62 EXPORTING
63 text = 'Error in DDIF_NAMETAB_GET'. "#EC NOTEXT
64 ENDIF.
65
66
67 ELSE.
68 * model table only needed for standard datastore objects, for
69 * write optimized DSOs target table is a changelog that is fully described by
70 * dta_pro (infoobjects)
71 CHECK n_s_dta-odsotype = rsdod_c_type-standard.
72
73 * get model table fields to add
74 CALL METHOD cl_rsd_odso=>get_mod_tab
75 IMPORTING
76 e_mod_fld_ur = l_t_comp.
77 ENDIF.
78
79 * according to T.B. ( 13.04.2007) the correct position is
80 * not needed in the D version
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Execute Post-Import Methods and XPRAs for Transport Request
SY-MSGTY E
SY-MSGID DA
SY-MSGNO 300
SY-MSGV1 /BIC/AV_AMOFCB40
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20110208
SY-UZEIT 104759
SY-XPROG SAPLSYST
SY-XFORM SYSTEM_HOOK_OPEN_DATASETHi All
We are also experiencing this same error when transporting deletions of multiple objects.
Although the transport was cancelled in the destination system (production) it appears to have largely deleted all objects successfully except for DSOs.
The DSOs still appear in the table RSDODSO (via SE11) but are not visible anywhere else. When you try to view the DSO via RSDODS a warning appears saying "DataStore object to be deleted by transport -> delete only allowed". If you try to delete them in this transaction the same ABAP runtime error as the transport appears.
Any assistance would be greatly appreciated!
Regards
David -
Function module related to release transport request
Hello experts,
I am working on product management system hierarchy. The hierarchy is like
PRODUCTSSUBPRODUCTVERSIONPACKAGE
we can create transport for VERSION directly from CONTEXT MENU. Next step is download transport to client PC I have done with it. FInal stage to release transport directly from context menu. For this i am searching for appropriate function module. If anybody know which function module to be used for transport request release please share it with me.
Thanks,
AvadhutHi,
You can use TR_RELEASE_REQUEST to release a transport request directly.
The class CL_CTS_REQUEST is also worth looking at. -
ChaRM: read categorization of change docs based on transport request ID
Hi There,
We have ChaRM implemented with 4 level categorization. I am writing a report to find change docs and read their categorization based on a transport request attached to the change doc. Unfortunately I can't figure out the connection. Could you pls give me guidance? Thanks in advance!
ÁdámIn the meantime I found a very useful article on the wiki: http://wiki.scn.sap.com/wiki/display/Snippets/Reading+CRM+Transaction+Categories+Hierarchy
If you need my complete code, drop me a mail.
Thanks,
Ádám -
Does RSA9 Create a transport request?
Does RSA9 create a transport request to go from the development instance to QAS instance? I did this in development but cannot see it in a transport. Do I need to execute RSA9 in each instance?
Thanks for your assistance.
DenBhanu:
Thanks for the suggestion. While creating a transport and trying to add this object I found that this was assigned to a $temp project. Therefore no transport creation.
I changed that to another project and was able to create the transport with this object added (R3TR DSAA APCO_MERGED ).
Now one more question:
Previously my datasources did get transported to our QAS instance but they are all under the NODESNOTCONNECTED Unassigned nodes.
Can I now transport the Application Hierarchy to QAS and will this reassign the nodes? Or do I need to transport the Application Hierarrchy and re-transport the other datasources again?
Basically, how do I fix this.
Thanks for your very helpful information.
Den -
Error while assigning objects to Transport Request
Hi All,
while assigning a Transfromation to a Treq i am getting an error saying
Object '7KU37C7IG3T7AQ5NHSLEZVC91' (ROUT) of type 'Routine' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '7KU37C7IG3T7AQ5NHSLEZVC91' (in transport request ROUT) of type 'Routine' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
Kindly advice how to rectify this errorHi,
You see the which infoobejct contains that routine and first collect that infoobejct and transport it then transport Transfromation. I hope you are missing some Routines while collecting the Transformations into request.
See OSS Notes:
Note 613581 - Transfer structure does not exist in version 'D'
Note 508921 - P11:Content transfer:RSO 252 or RSO 296:InfoObject
Note 1157873 - BI7.0(SP18) Message RSO 252 using transport connection
Thanks
Reddy -
Error while Transporting Request
Hi All,
we have ECC 6.0 on Unix environment.
we had copied a production client with group selection, as we wanted all the three system PRD,DEV,QLT in sync.
the export was succesfully done.i copied Cofiles & Datafiles which are generated in DEV & Quality server,then i add request no in transport queue. the time when i copied transport request was not releasing from development.we checked the destination it was full so we removed the old request. then req is releasing.
after that i deleted the Cofile & datafile from OS level of DEV & QLT & trying to delete the reques from request queue. it is deleted but when im refreshing the queue its coming back in the queue.
while transporting other request its giving me error.
please help out me.Hi Aasmi Gawas,
Please could you post the error?
We don't have a crystal ball to see the errors in your system...
Best Regards,
Erick ILarraza -
Error while importing a transport request
Hi,
I installed two SAP ECC6 EHP6 IDES sytems and created a transport route between them.
When I try to import a Transport request I get the following error:
HALT: inconsistent preview tables E071K_STR (size=344) and E071KS_PREVIEW (size=128)
Please help me find a solution to this problem.Hello Occoro,
There are multiple steps you need to do, I am not sure if the following note is applicable to your version of SAP.
1730009 - Import queue does not work
Downloading R3trans and tp is similar to downloading kernel.
Download the versions relevant to your SAP Kernel 7.20, the latest patch should be available at http://service.sap.com/swdc
In the same area where you get SAP Kernels, you should be able to get files such as:
R3trans_xxx-xxxxxx.SAR
tp_xxx-xxxx.SAR
Download these files, uncar them to your kernel directory typically /sapmnt/<SID>/exe
Refer to the following note for more details:
19466 - Downloading SAP kernel patches
Good luck.
Regards,
Siddhesh -
Error while releasing Transport request number
Hi Friends,
Whenever i release the Transport request from SE01 i am getting the following error. Please view the attached image . Could you please explain about that error ? and how can i prevent it in future ?At starting it shows warning like " Your object contains error continue or cancel " but if i proceed with continue after completion of the releasing process it shows (0) successfully completed but not with an error message. As Krishna Chaitanya said i might have used any dependent object. by reading all of your answer i could understand that this is not sever problem. But i would like to understand this process very clearly . All i want to know is
how to release the request without any inconsistencies?
and which is the best way, ?
is there any requisition before i initiate releasing ? -
Error while releasing transport request
Hi,
When i tried to release the transport request, it returning with code = 8 (error) so transport has not done. When I digged into the transport request, error message is
'unimplemented function REPC_OR_DELETE DOCUMENTATION'.
Thanks in advance.
Arvind...Hi,
This is more related to the BASIS side,
still have found one solution in one of the thread. Still contact you BASIS administrator for it.
Solution.
Is the error pointing at TP or R3trans?
In this phase, we get error coz of r3trans.
Please try following the note 206168. which tells you to change the r3trans.
If you have changed the r3trans earlier, then try using the same r3trans as provided in the kernel CD.
Jayant Sahu -
Unable to release Transport request in CHARM
Hi all,
After Setting up CHARM,created a Transport request,while releasing it thru CHARM gives error:"Release of system Q11 Could not be determined"
rgds,
rajesh
Message was edited by: rajesh
Rajesh MDear Rajesh,
1.Did you released the Task of the request in satellite system?
2.What error you get when you check inside the task list of that correction.
Please give inputs,which will help us in solving the issue faster.
Thanks and Regards,
Avinash. -
Error while Releasing a transport request - DSO 0SD_O03: Active version
Hi all,
I am getting below error when I am trying to release a transport request.
Object ODSO 0SD_O03: Active version differs from modified version.
I activated DSO again,but I was not successful to correct the error.Please help me correcting this error.
Regards,
Bobcheck
match and copy while installing the business content
Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.With the most important object types, the active version and the SAP delivery version can be matched.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually.
A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content.
When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Installindicator separately.
The active version is overwritten with the delivery version if
the match indicator is not set and
the install indicator is set.
check following thread
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/102906a4-f13d-2e10-7199-ce316ff254b8?QuickLink=index&overridelayout=true
Thanks and regards
Kiran -
Error while importting Transport Request
Hi,
I am getting following errors while Transporting requests from Development to Test System
Error getting fields for PSA /BIC/B0000643
Error occurred during post-handling RS_AFTER_IMPORT ofr DTPA L
The Transport request just contains one Transformation the corresponding DTP.
We are using BI 7 for Bank Analyzer and have just imported SP11. This problem has started coming only after the import of SP11.Hi Pom,
Yes the DS were active. I tried to re-transport that too but the TR failed with similar error.
Finally I tried to manually activate the DTP in the Target system and got the same error. I rectified the problem by deleting the DTP from the Target system. But I am not sure why this happened. Please let me know if you have any idea abt the same.
Thanks
Pooja
Maybe you are looking for
-
Accessing managed-bean in a JSP (portal theme).
I have a tricky situation where I need to access a managed-bean outside a JSF jsr 168 api portlet. Now I need to reference the bean in the themes jsp (just fyi themes loosely relate to JSP's which control the look and feel, navigation within portal p
-
I'll start by thanking the guy who set up the registration process for informing me that my first name is a "bad word" and that I must "clean up my language" before proceeding. I'll rush down to the courthouse tomorrow to change the name that I've c
-
Is it possible to recover an original pdf document from a modified version??
I received a court document in pdf thats internal content was modified, is it in anyway possible to recover the original from the modified version?
-
I was trying to download adobe digital editions and mistakenly selected french as my language preference. Now my download pages for Adobe are all in french. How do I select english instead?
-
Wo kann ich den Ordner für Fotoeffekte finden??
Hallo Ich möchte gerne Actions, die ich heruntergeladen habe, in PSE8 installieren. Ich habe dafür auch eine ausführliche Anleitung gefunden (für meine Windows XP Version), allerding finde ich den Odner nicht, in den ich die Actions kopieren soll. De