PC Internet Not Working with Airport Extreme

Hey guys, just got a new Airport Extreme to replace my old one. Me and my brother's MacBook's both work in terms of the internet, but my dad's PC's internet will not work. It is connected to the Airport, but has no internet access. Any ideas? Thanks.

Apple's support section (http://docs.info.apple.com/article.html?artnum=306256) says "How to enable Cisco VPN connections
You should use Cisco's VPN client software to establish a Cisco VPN connection via an AirPort Extreme base station. Note: In the Cisco VPN client preferences, make sure the "NAT-T" option is enabled.
Note: Some corporate firewall configurations may cause issues with the Cisco VPN software.
Please contact AppleCare support if you are unable to contact a Cisco VPN server via Cisco VPN client software and an AirPort Extreme base station.
I'm experiencing the same thing. DellLatitude D610. Netgear rangemax wireless PC card (WPN511). I can connect to the internet but I try to vpn into work I get half way through the connection process and get an error which states" Secure VPN Connection terminated locally by the Client. Reason 412: The remote peer is no longer responding. I've spent 2 hours trying different settings. I really want to stick w/the apple product but will have to return it if I can't get it to work. I need cisco vpn via wintel for work.

Similar Messages

  • Airport card does not work with Airport Extreme when security is turned on

    I have an iMac running OSX 10.4.11 with an Airport card installed (firmware version 9.52).
    I recently replaced my Netgear wireless router with an Apple Extreme Base station and now I am not able to connect my iMac to the wireless network when WEP security is turned on - I get an error from the Airport Setup Assistant when I attempt to connect to the wireless network.
    It works fine if the wireless security on the Extreme Base station is turned off.
    Please help and thanks in advance.
    Motasim

    First, I highly recommend that you switch to either WPA or WPA2 as WEP is no longer considered secure. If you must use WEP, I suggest that you try the following:
    o Re-create the Network Name (SSID) on your AirPort Extreme Base Station (AEBS)
    o Try using 128-bit WEP, with a 26-Hex character key for the encryption type.

  • Pc will not work with Airport Extreme LAN connection

    I have setup my Aiport Extreme Base Station and my Mac and phone work just fine with the setup. However, I connected a PC directly to one of the LAN ports on the back, and the PC doesn't see the network. Above the port the light is blinking green. Any thoughts? 

    Is the AirPort Extreme Base Station (AEBS) the only router in your current network configuration? That is, it is connected directly by Ethernet to your Broadband Internet modem? ... or to another router between the AEBS and the modem?
    When connected by Ethernet to the AEBS, can the PC "see" the Mac or vice-versa?

  • 1.5 TB Seagate drive will not work with Airport Extreme.

    I have a 1.5 TB external drive connected to airport extreme.  I cannot get this drive to be recognizedby the computers connected to the Airport Extreme.  The drive show up as "-1.4 TB - Seagate FreeAgent 0138"  under disks in Airport Utility can plug it in directly to my Mac Air and a PC and the drive will work. When I plug the drive in directly to a PC or Mac Air,  it is recognized and can be used. 
    I can plug in a 250 GB external drive into the Airport extreme and they will work.
    Also,  the 1.5 TB works when plugged locally to a PC or Mac using USB. 
    Anyone know how to get it to work with the Airport Extreme?

    Assuming that the drive has been formatted in Mac OS Extended (Journaled) or MS-DOS FAT32, you almost always need to use a powered hub with a drive attached to the USB port on the AirPort Extreme...even if the drive has its own power supply.....because the USB port is under powered and will not supply enough current to most hard drives.

  • Mac filter not working with Airport Extreme

    I setup my new AEBS and for whatever reason when I setup the Mac filter it still will let the desired user in with the key. I have both the wireless N and the wireless G (guests) setup and it doesn't seem to work with the G for sure, unfortunately I don't have any other wireless N capable units so I don't know if it works with N. I would assume that it would block all other Mac addresses if I select "No Access." Please help, and no I do not have any extensions of it, it's just the Extreme as the single wireless access point in our house with WPA security. Thanks!

    I had the same problem. On the MAC access panel in Airport Utility, click on the default user and then use the drop down menu below and click no access. Any of the added IDs you have added you can still put 24 hour access and only those users can connect to the network.
    The default is set for all access, so unless you change this, no matter how many separate IDs you add, it will let anyone on if they have a password.
    I didn't figure this out for years, but now it works the way I thought it was working all along...

  • Linksys gaming adapter not working with Airport Extreme

    Hey guys, just installed Airport Extreme 802.11n for my new MBP notebook and I have 3 laptops Apple and PC that work great! BUT! I have an Xbox with Linksys gaming adapter and the gaming adapter is not picking up the airport at all! Before the Airport I had a Linksys wireless router and it has worked with the gaming adapter for the last 3 years flawlessly. Does anybody know why the gaming adapter is not finding it?

    Hey guys, just installed Airport Extreme 802.11n for my new MBP notebook and I have 3 laptops Apple and PC that work great! BUT! I have an Xbox with Linksys gaming adapter and the gaming adapter is not picking up the airport at all! Before the Airport I had a Linksys wireless router and it has worked with the gaming adapter for the last 3 years flawlessly. Does anybody know why the gaming adapter is not finding it?

  • Imac internet not working with airport express

    Hi there,
    I purchased an imac for my upstairs bedroom, but the signal from the time capsule was weak, so I bought an airport express and set it up. But still I cannot connect to internet even though after running the network diagnostics say I am connected to internet. My macbook works perfectly in the bedroom with all airport bars working, but the imac still has only two bars. I've tried everything, help!!

    Same issue you have except I never connected the printer directly to my Mac via the USB. Went straight to the wireless Airport Base Station and connected the printer. Printer is found in "Printer Setup Utility" and connected via "Bonjour", unsure what that is. However the *"Printer Setup Utility"* is asking me to select: *"Print Using"* and giving choices such as CANON BJC-1000 - GIMP-PRINT v5.0.0 beta2. I am unsure what to select. And the printer still doesn't print even with one of these 20 choices selected. Any ideas from anyone?

  • Is Internet Explorer incompatible with Airport Extreme for connecting wirelessly to the Internet?

    repeat -is Internet Explorer incompatible with Airport Extreme for connecting to the Internet- I am trying to hook  up my sister's / Windows 7...HP mini computer to my wireless connection (Airport Extreme to cable /BrightHouse ) all I get is -failed due to 'error 651' -am about to call the jockeys at the cable company to see if they have work-around. Any comment appreciate. Thanks./jimiros

    Diane,
    I have added very few apps to my G5. The majority of my time is spent editing photos with PhotoshopCS3. I have software updates set to run weekly and have always kept them up to date. I really believe it's a disk permissions issue...but repairing them doesn't help.
    *+Upon installation, I used Archive and Install.+* While I agree that Erase and Install may sound like a good idea, it makes me nervous. I do have everything backed up on a bootable CMS drive, but I'm a photographer and was hoping to not have to erase the G5.
    Yes, as I mentioned in the original post, I've downloaded and installed the Airport firmware update. And all software is up to date.
    All was working just dandy before the upgrade. Unfortunately now it's sounding like I may have to erase my hard drive and install fresh.
    If I do that, is it just a matter then of dragging my photos from the backup disk to the G5? And documents? Etc?? The thought of getting all my photos and important information back on the G5 seems a bit staggering.

  • Time Machine will NOT work with Airport Disks!

    It looks like Time Machine will not work with Airport Disks after all. All references to Airport have been removed from the Time Machine page:
    http://www.apple.com/macosx/features/timemachine.html
    It also specifically says: "You can designate just about any HFS+ formatted FireWire or USB drive connected to a Mac as a Time Machine backup drive. Time Machine can also back up to another Mac running Leopard with Personal File Sharing, Leopard Server, or Xsan storage devices."
    Surely, they would have included the Airport Extreme Base Station in this list if it was supported.
    I really hope there will be another firmware update for the AEBS which will bring compatibility with Time Machine, because Time Machine was the only reason for me to buy an AEBS. (I only use it as a small backup server, I don't even have wireless networking enabled. There were other solutions, e.g. from Synology, which are faster and more reliable than AEBS disk sharing, but Synology stated their network drives would not be compatible with Time Machine.)

    Here's how you can potentially use your AirDisk with TimeMachine (beware that YMMV), but it should work as it works with every other "unsupported" device.
    1) Mount your AirDisk so it appears on your Mac
    2) Open Terminal.app
    3) change directories to the AirDisk's root folder located in "/Volumes"
    ie: cd "/Volumes/AirDisk Name"
    4) execute this command to "bless" the drive to be used with time machine:
    touch .com.apple.timemachine.supported
    5) Start TimeMachine and if all went well, it should recognize your AirDisk drive and use it for TM.
    This should also work on NFS shares, SMB shares, AFP shares, basically anything. It has worked up until the last developer seed, so unless they yanked this at the last minute, it should still work.
    Now, the reason why Apple removed this feature may be due to the unreliability of the AirDisk, so be cautious.

  • Will a WD hard drive work with AirPort Extreme to connect with an iPad Air

    Will a WD hard drive work with Airport Extreme to connect by a iPad Air

    If you already have an AE and a WD drive .. the best idea is plug it in and see on a mac in airport utility is the drive recognised.
    If not you have problems.. if it is formatted correctly (Not NTFS mainly) then it can be a drive that is not compatible.
    assuming it works get your ipad and pay for filebrowser or at least download a test copy and see how it goes.
    Always the best way to find out.. try it.

  • Any current inkjet printers work with Airport Extreme 802.11g Basestation?

    Does anyone know if there are any printers out there currently being sold that actually work with Airport Extreme (802.11g)? Not the latest 802.11n basestation, but the UFO-shaped Extreme g basestation? I recently tried the HP DeskJet D4160 and it does not work at all with it, although my deprecated HP 940c works just fine. I need to replace the 940C, and I don't want to have to buy and return 20 different printers in order to find one that actually works... Any help is appreciated!
    Thanks

    Checkout the list on iFelix's site.

  • Does AirPlay work with AirPort Extreme?

    Does AirPlay work with AirPort Extreme?

    The AirPort Extreme does allow AirPlay to "pass-through" but it does NOT support receiving AirPlay streams to be played back through powered speakers or an audio receiver as it does not have any built-in audio circuitry like the AirPort Express models.

  • Will a wireless printer work with airport extreme?

    Will a wireless printer work with airport extreme? Such as an HP Photosmart D110.

    Yes, it will as long as it is within wifi signal range of the Extreme.  Of course, you'll need to go through the printer setup sequence. NOTE:  The D110 is not AIRPRINT compatible, so it will not print from ios operating systems that are installed in mobile devices such as iphones, ipads, ipods.  However, there are Apps that are available for non airprint printers, but their quality and effectiveness are questionable.

  • Will sony s-air sw10ti work with airport extreme?

    Hi There,
    I have the Sony S-Air SW10 Ti which has a great sound but the Aerial on it for DAB Radio is rubbish, it does have a docking station which also sounds good but no other connection parts. Would this perhaps work with " Airport or Aiport Express/Extreme" ?

    Thanks - I am glad that you explained your situation a liitle more - although there is no direct way to connect to the wi-fi of the Sony - the Airport Express (not the Extreme) has an audio out jack that can be connected to any system - this would be an indirect way of using wi-fi with your Sony - see this link - http://www.apple.com/airportexpress/ - you could also incorporate Apple TV into your setup - see this link - http://www.apple.com/appletv/ - but as you can see, both of these choices involve AirPlay and Itunes which may limit your options - and because they are beyond the scope of this discussion group, I would suggest that you re-word your questions and ask them in the appropriate disccusion group in this forum - I hope that this clarifies things somewhat.
    Charlie

  • Comcast Cable Internet not working with router (WRT54G), but network is fine?

    My Comcast Cable Internet is not working with my router (WRT54G), but my home network is fine. The internet works without router.
    I have a WRT54G Wireless-G Broadband Router from Linksys.
    I was using Bellsouth DSL Internet up until two weeks ago.
    I had my DSL modem connected to my router, and the router let me use the internet and share some files and printers with my laptop upstairs.
    A few weeks ago we changed to Comcast cable. The technician came in and connected it himself, but only for the desktop. The internet worked perfectly, and still works perfectly on my desktop (the one downstairs). He didn't really give me any instruction or CD-roms for it.
    When I tried connecting my router, the internet stopped working. It was weird because the router worked for the file sharing and printer sharing between both my computers, but the internet didn't work. Although, the light for the internet is lit on the router itself.
    I even have this program called "AOL Network Magic" which shows a map of what is connected to the router, and it shows that the router and my laptop and desktop are connected, but then it has an "X" for the internet connection.
    I have tried everything. I lost all of my CDs and things that came with Linksys, but I downloaded some guides from the Linksys website and it doesn't really help. I tried something called "NetSet", but after I set everything up it says my router is not compatible or something with NetSet. I read a bunch of FAQs, I tried going to comcast and seeing if they had any FAQS about it, but I can't find anything.
    Maybe one of you can help me?
    Also, I don't know my modem's IP address. I had it for Bellsouth, and sometimes when I would lose my connection I would go there and click on "reconnect" or something like that.
    So the only way I can use the internet is to disconnect everything from my router and connect the ethernet cable directly to the modem.

    You may open the web setup utility page of the router by typing its IP address on your browser's address bar. By default, it is 192.168.1.1.  When you're asked for username, you may leave it blank.  For password, its "admin". If in case that does not work, reset your router at the back for 30 secs and do a power cycle again, see if it becomes accessible after that...
    "The war between heaven and hell depends on the choices we make, and those choices require sacrifice. That's the test"

Maybe you are looking for