PC issue.--Problem with index step.

Hi
Today our two chains are failed at loading ..
source is R/3 & update mode is delta.
Iam corrected the error and loaded the delta again useing repeat option,in cube request showing repeat of last delta.In monitor screen overall status is green but Total status showing is RED.But in cube it is showing green.loaded fine
For one chain when iam click on repeat on loading step ,it is loaded data fine into cube ,but unfortunately deleting index turned into yellow looking like execuating .This index step avalible on top of the loading step. before index step executed fine, load step is failed.when iam clck on repeat it is went to executing index step. I donot no why..but it is still showing yellow...
Now my question is, weather chains run tommrow with out any problem with deltas..? because chain still showing red colour.
Thanks
Bk

Hello Krishna Rao
I will explain clearly we have one PC haveing say 5 steps.1 2 3 4 5.
Third step is Deleting Index and Fourth step is Loading into cube.
Today our chain is failed at fourth step.Iam corrected the error and clicked on the repeat ..loading into cube done fine
But strangely in went to Third step to execute. that is still in yellow colour .But total chain status is showing red.
And also in batch monitor job was finished successfully.But in chain index step showing still yellow..
I think now iam clear for you...
Bk

Similar Messages

Problem with Decision step execution

Hi Friends,
I have a problem with executing a decision step. When I execute the decision using SAP_WAPI_DECISION_COMPLETE the workitem goes to completed state and doesn't do anything after that. But when I execute the same step from SBWP the subsequent steps gets executed and rest all works fine. I am sure there is a problem with Decision step . The task I am using is TS00008267. Is there a replacement for this step or is there something to do with feature ADVANCE WITH DIALOG or agents .I have agents in place. Please help.
-Rajesh

when I write the decision using FM , the WI is set to completed but
I am not sending any status to workflow container from the task container
. Is this the issue for workflow not able to continue !
There is no necessity of sending any result back to the workitem container. In the decision step container , it contains a standard container element WIResult it will populated based, on the decision you took on the workitem (IF it is a Decisionworkitem).
when I execute the FM to write the decision, the task ( generic decision task)
is not getting executed.
Can you pelase let us know what is the return code, th function module is retruning back, once you try to execute the workitem by using the FM, if it is other than zero then can you please let us know what is the message.
, Before trying to execute the workitem can you please check whether the workitem is stored in the standard workitem header table SWWWIHEAD. as the above function module will validate the workitem from the header table.....

Problem with index in merged projects

Dear Sir,
I have a problem with index in the master project, I can only
view the master project index keywords under the index tab. My
master project contains 2 topics besides the other sub projects. I
have created index for all sub projects indvidually and at the end
I created the master project index.
I made sure that the 'Binary Index' flag is ticked before
compilation and stil the problem is on, do somebody know what could
be the problem.

Hi,
Two points here.
Firstly, you can duplicate SSL's. (Right click on an SSL in
the projects sub-directory and select the duplicate layout option.
This will give you a copy of the original SSL).
I tend to have two SSL's - one is local and I use that every
time I test compile the project when I'm working on it.
The other is set to output to the master project. I use that
once I'm happy with the sub-project and start working with the
master project.
Second point is to be aware of how RoboHelp treats the
imported/merged .chm files from the sub projects.
It imports them into the main project master directory - then
when the master project is compiled it puts a copy of them into the
master project SSL. However, if you re-compile it doesn't overwrite
the files that are already in the master project SSL directory.
This is why you have to be aware of where the sub project
.chm files are going - you need to make sure that if you revise the
sub projects, a fresh copy of the .chm files ends up in the output
SSL directory of the master project.

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
Detected Problems:
- Access denied for attached mailbox (department mailbox)
- Access denied for delete or move messages on own mailbox
- Can't send new messages with error (Error: [0x80004005-00000000-00000000])
Solution:
- Rollback to Exchange 2010 SP3 - Rollup 7
- You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
Algunos de los destinatarios no recibieron su mensaje.
Asunto: Hola
Enviado el: 11/12/2014 8:35
No se puede localizar a los destinatarios siguientes:
'[email protected]' en 11/12/2014 8:35
Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red.
Error: [0x80004005-00000000-00000000].

See the following forum thread:
https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8

Problem with One-Step Approval of Contracts ws14000088

Hi, I have a problem with the One-Step Approval of Contracts ws14000088, the workflow can't find approverat the task TS14007969
regards
Dayana

Hi
<b>Please go through these links, which will definitely help -></b>
Which SRM version are you using ?
Re: Problem with one step approval contract workflow
Re: No Approver(s) Found
Reminders for work item
Re: How to add a new field to the notification mail
Do let me know.
Regards
- Atul

Problems with 1-Step RoboPDF

I am using RoboHelp X5. It seems I can't get RoboPDF to
start. Neither can I uninstall it to reinstall it. I want to be
able to directly generate PDF without going through Word first.
I have the RoboHelp 6 upgrade, but I wanted to finish my
current project before attempting the upgrade. Makes sense, right?
But I heard generating PDF is much easier in 6 than in X5. Is this
true? How difficult is the upgrade?
Craig

quote:
Originally posted by:
Peter Grainge
The reason I asked was that some people have reported they
cannot uninstall it because it does not appear in Add / Remove.
When advised where it is, it then transpires that they had not seen
it. Hence asking the what was happening. OK?
If you want to remove manually that's up to you. If RH6 finds
some trace, it is likely to refuse to install.
Adobe are aware that there were problems with 1 Step so you
might do better to get in touch with Tech Support.
Oh good. I have already stumped the unofficial experts. Sigh.
While RoboHelp functions just fine, RoboPDF has never functioned.
And to make things even better, while RoboPDF installed, it will
not run. Why? Because when I checked the shortcut's properties, and
looked at the execution path, the path was incorrect. The path
pointed to where the exe file was not. I have never seen that. It
pointed to an empty folder. I searched for the exe file, found it,
and corrected the path. Still no go. I think I will have to visit
the guys over at Adobe, unless you folks have a brilliant idea.

Pages '09 problem with index

Hi all,
So this is my problem, i'm editing ePub to publish in the Apple iBooks Store, and do them with Pages, but i've big problems with index
i'm using personal styles (as i change chapter colors, font size)
in "old Pages" i could not do index as it was telling me i was not using none of the style in index (even with my proper styles markeds, now when i create index in the style box my styles doesn't show soo it can't create index)
In Pages '09, i have no problem to create index, the problem is when i export to ePub it does not show it
or when it was shoing it, in the normal index, i could also see it in the book as a normal page, and i want it only in the normal ebook index.
any suggestions?
thanks for your help
(if answer can be from Spanish person in Spanish, beter, than beter, but English or french answer welcome too )
have nice .... what ever it is for you.

more or less i got it (after trying, and trying)...
i used the template from apple: http://images.apple.com/support/pages/docs/ePub_Best_Practices_EN.zip
then i make my peronal style using the color i whant for chapter title... this is ok
but still hane the enoying index as normal page....(pic 1) only what pic 2
if i find a solution, will post it, if you find it, and also how to change the color of the index text (it is supposed to be change to black...)
I'll apreciate the help.
thanks again, and have nice day

Problems with Indexing and Classification

hi KM Gurus,
We faced some problems in Indexing and Taxonomies for which I would like to know the solution/reason.
(1) We tried providing query based classification in which the query condition which is based on the "Content" alone worked for us. Whenever we tried specifying conditions based on "file extension" or "title", it didn't work out. Did that work for anybody else?
(2) Also we are not able to get any proper info about the various options that are available while creating a query based classification. For example, there are two options like "title" and "string title". But we donno the difference b/n the two. If it works out we can find the difference. But it is not working too. So we are not able to find the difference between the two.
(3) And I tried setting the crawler parameter of my own instead of the standard crawler. But the index was found to be inactive when i set that to my crawler and it worked fine with the standard crawler. I am not able to make it active. Any clues behind this?
Expect all your guidance and help.
best regds,
alagammai.

Hi Alagammai,
concerning issues (1) and (2).
Normally the mentioned properties are displayed as 'Name' and 'Namme as String'.
These two properties are(in most cases) the title of the document.
One is indexed in 'Text' format. The other one in 'String' format. That results into different opportunities within the query based classification.
'Displayname as String' can be used to sort documents alphabetically: A, B, ... into categories.
'Displayname' allows you to do a linguistic scan on document titles.
To separate file types I would use the property MIME-Type.
But you may try to define a query *.doc for the property 'Name as String'.
Regards Matthias

Problem with index of numbers in BSP Front end

Hello All,
I am facing the below problem. Request your help.
Scenario: When I am trying to add the projects in the Front end , I am facing the problem with the index of numbering of the projects.
Example: If I am adding 6 projects ( at the max only 4 on each page i-e there are 2 pages ), then the index is wrongly numbered and the arrow (for direction of the pages) are wrongly displayed. The direction of the arrow is pointed to the next page rather pointing to the previous page and the index of numbering of the pages is wrong.
Request you to please suggest if this is any code fault in the table maintainance activity in the backend (BSP).

Hi Irina,
If you mean the number range is skipping 10 numbers in between runs then its because of the buffering in the number range.
To avoid the buffer influencing the number range, pass
'X' to the function module parameter: IGNORE_BUFFER.
This should resolve the problem.
Cheers,
Aditya

Problem with index.html. Help!

I am having a problem with the index.html. In iWeb my site looks perfect. When I publish it to a folder and then open the index certain media is missing but just on one page.
I have tried deleting the published site from the folder and re-publishing but nothing seems to work. Same result...
Even more interesting, I uploaded the site almost a month ago and everything was fine until I noticed last week that my pics on one page had been completely erased. What could cause the change? I didn't upload a new version of the site.

Even more interesting, I uploaded the site almost a month ago and everything was fine until I noticed last week that my pics on one page had been completely erased.
Please provide your url so we can see what is happening.
The index.html file plays no role in what you are describing.

OS X 10.5.x AirPort Dropout Issue - Problem with Apple

I am posting this as a new topic in the hope that Apple will take urgent action to resolve these AirPort dropout issues with OS X 10.5.x.
Yesterday, I installed setup a new 40GB partition on my firewire drive and installed OS X 10.5.2 (from my original installation dvd) and did all updates (via Software Update) to arrive at an up-to-date OS X 10.5.5. Only stock standard OS X 10.5.5 installed now.
Some interesting observations along the way:
1. After installing 10.5.2 the AirPort network kept dropping out or stalling.
2. Installed following updates:
- AirPort Utility (5.3.2)
- QuickTime (7.5.5)
- iLife Support (8.3)
- iTunes (8.0)
- Remote Desktop Client Update (3.2.2)
- Java For Mac OS X 10.5 Update 1 (1.0)
I did not update to OS X 10.5.5 at this time.
3. Restarted and AirPort network stable and fast.
4. Ran Software Update again - installed:
- Front Row Update (2.1.6)
- Mac OS X Update Combined (10.5.5)
5. Restarted and AirPort network stable and fast.
6. Ran Software Update again - all software up to date.
7. Repaired permissions with Disk Utility.
Everything has been going fine with connections to the internet with Safari - until this morning.
My 'clean' OS X 10.5.5 installation is now suffering from the same AirPort network dropouts - no 3rd party applications installed. Ran OK for a day, but after being shutdown for 5 or 6 hours, the problem arose following startup this morning.
Conclusion:
1. AirPort problem with OS X 10.5.x; or
2. AirPort problem with new 17" MBP; or
3. Problem with AEB 802.11n (gagabit ethernet); or
4. Problem with DSL modem or ISP connection.
Comments on item 1 - think I have conclusively eliminated 3rd party software.
Comment on item 2 - no problems indicated by TechTool Delux or TechTool Pro 4; works OK via ethernet connection.
Comment on item 3 - previously did factory reset and textbook setup on AEB. Connection via AEB 802.11g relay and remote work fine.
Comment on item 4 - fact that other computers connect OK and this computer can connect OK via ethernet rules out problems with DSL modem and ISP.
Draw your own conclusions, but I am now certain the problem is clearly with Apple.

Hello,
looks same to me.
the log says:
kernel AirPort: Link Down on en1
kernel unable to collect channel list from hal;(...)
my AEB is just 2 ms away from the MacBookPro, the AEB is brand new.
In the moment I have an ethernet cable going from the router through the house, because the AEB is unrelyable. I used all the tricks people posted and said it would solve the problem, which is not the case for me. Dropouts just continue.
With the old ufo-style extreme there was no problem at all.
So please Airport developers put effort to solve the problem and suffering of users.
thanks

Problem with Indexer

Hi,
i am trying to develop a small search engine... currently i am trying to develop STOPLIST..... which iterates through piece of text and extracts different words and their respective frequencies... here is the piece of code which does this :
======================================
for( int c=0; c < lines.size(); c++) {
temp = lines.elementAt(c).toString();
temp = temp.toLowerCase();
st = new java.util.StringTokenizer(temp);
while( st.hasMoreTokens())
words.addElement(st.nextToken());
for( int b=0; b < words.size(); b++) {
extractedWord = words.elementAt(b).toString();
for( int a=0; a < words.size(); a++) {
if( words.elementAt(a).toString().equalsIgnoreCase(extractedWord))
extractedWordFreq++;
extractedWords.addElement(extractedWord);
extractedWordsFreq.addElement(Integer.toString(extractedWordFreq));
extractedWordFreq=0;
for( int z=0; z < extractedWords.size(); z++)
System.out.println("Extracted Terms : " + extractedWords.elementAt(z).toString() + " Freq : " + extractedWordsFreq.elementAt(z).toString());
========================================
the only problem with above code is that .... it takes a long time to
execute... around 30 seconds....
Here is the spec of my pc :
P4 : 512 MB RAM
The piece of text has around 7500 words
when i execute this code... and look at my Windows Task Manager....
CPU usage goes to 100 %.....
All I wanna know is that ... is there any way to change this code so that it executes more swiftly.....
thanx in advance
have fun

Hi
I read your previous reply: Vector, Array, StringTokenizer, etc. They are "heavy weight" not concerning to peformance so your code uses brute force.
I found an example dealing with this issue and I believe to be faster than your but you must to modify details:
import java.io.*;
import java.util.TreeMap;
import java.util.Iterator;
public class WC {
public static void main(String args[]) throws IOException {
    if (args.length != 1) {
      System.err.println("Usage: java WC <textfile>");
      System.exit(10);
    File file = new File(args[0]);
    StreamTokenizer stream = new StreamTokenizer(
                                   new FileReader(file));
    // treat any punctuation as word delimiters
    stream.whitespaceChars('!', '/');
    stream.whitespaceChars(':', '@');
    WordFrequencyCounter wfr = new WordFrequencyCounter();
    String word;
    int countNumbers = 0;
    while (stream.nextToken() != StreamTokenizer.TT_EOF)
      if (stream.ttype == StreamTokenizer.TT_WORD) {
        word = stream.sval;
        wfr.count(word);
      else if (stream.ttype == StreamTokenizer.TT_NUMBER) {
        countNumbers++;
    System.out.println("File: " + args[0] + " (" + file.length() + " bytes)"
                       + "\n#lines = " + stream.lineno()
                       + "\n\n#words = " + wfr.size()
                       + "\n#numbers = " + countNumbers + "\n");
    for (Iterator it = wfr.keySet().iterator(); it.hasNext();) {
      word = (String) it.next();
      System.out.println(wfr.frequency(word) + " " + word);
class WordFrequencyCounter extends TreeMap {
// first see if this word has already been encountered;
// if not, then create a fresh counter for it;
// otherwise, increment its counter
public synchronized int count(String word) {
    Integer counter = (Integer) get(word);
    counter = (counter == null) ? new Integer(1)
                  : new Integer(counter.intValue() + 1);
    put(word, counter);
    return counter.intValue();
// find out how many times this word has been encountered
public synchronized int frequency(String word) {
    Integer counter = (Integer) get(word);
    return (counter == null) ? 0 : counter.intValue();
}Regards.

Problems with Initial steps for Mapping with Java in XI 3.0

Hi,
I am having problems with a simple java mapping in XI 3.0. I have created another test class in my PC to test it ,and it works.
But when I use it in a example mapping it does not work.
I think the reason is because It cannot find the classes used in the XI server.
What do I have to do to make it work ?
Do I need to add / change / view something in the XI server?
Thanks a lot...
David

Down by java mapping

Problems with indexing

Hi, I recently encounter a problem with my spotlight.
I can' t find any files when i Type something ( for example iTunes nothing appears).
Well, I've tried all the solutions proposed over the the net:
.Drag the Volume on the privacy tab then remove it
.Use command in terminal.
.Delete the spotlightv100 folder.
The results are the same...it reindexes, but it takes 1 minute
to reindex; I don't think 1 min is enough to reindex a 60gb hard drive.
Thanks for the Help

I've noticed it because each time I requested something in the spotlight ( for exemple I typed the letter F or T )the spotlight proposed me files only from Adobe folder so I thought the problem came from this folder.Then I searched on forums if a file could be a problem and i've noticed people having a problem with this file called XXXviet.html ( i don' t remember the name exactly). So i've deleted and now all is ok.

Problem with index markers and importing MS Word 2007 files

This was ugly in that it wasn't caught until after a book had been typeset and the index was being finalized. I'm now having to go back and manually insert a zillion index markers. Not fun.
This was my first project since migrating from FM 7.1 to FM9.0.3.
Source documents are Microsoft Word 2007. Am working in Microsoft Windows 7 64-bit.
When the Word files were imported into FrameMaker, only SOME of the index markers were imported. The difference between those that were imported and those that weren't was seemingly random.
I did some testing and found the problem and a solution.
Looking at the source Word .docx file, and displaying hidden text shows two types of index markers:
1. { XE "word to be indexed"}
2. {xe "word to be indexed"}
Note the difference in case and the extra space after the opening brace in #1. Markers of type 1 were imported fine. Markers of type 2 were stripped by the import process.
The solution:
Backsave the Word file to Word 2003 format (.doc) before importing into FrameMaker.
I backsaved to Word 2003 and imported using both the "Microsoft Word" and "Microsoft Word 2007" filters and both filters imported correctly. It's only when trying to import a Word 2007 .docx file directly that things run amok.
Grr...

Thank you for posting your solution, Dan. It's cold comfort, but I've also ran into this issue in the past, almost certainly well before Word2003 though, probably as far back as Word2000 or earlier.
In your testing, did you try saving as RTF to see if the markers were homogenized, by any chance? In my simple testing just now, Word itself recognized the index field correctly no matter whether I changed the field to "xe" or "XE", but FM's import of the .docx file format wouldn't recognize "xe", only "XE". But importing an RTF file handled both upper- and lower-case entries.
Ah, yes, that's it -- saving the Word2007 file as RTF (with 2 fields, one caps, one lower-case) changed cap field to lower-case when the RTF is opened in Word again, so saving as RTF does homogenize the fields to lower-case. Is it possible that your file(s) were changed to or saved as RTF at any point in their life-cycle? I believe some older versions of Word were actually RTF under the hood, too -- if you do Save As in Word2007 you can scroll through the File Type entries and see "Word 97-2002 & 6.0/95 - RTF (*.doc)" I believe some doc management systems change binaries to RTF too, or conversely some apps create RTF but they name the files as doc.
So Word itself recognizes either lower- or upper-case, and FM's RTF import handles both, but not the .docx import.
Sheila

PC issue.--Problem with index step.

Similar Messages

Maybe you are looking for