PC issues - need advise regarding best option...

Hi there,
I'm in a bit of a mess and would like advise on the best way to handle it.
My PC has just died (WindowsXP - power supply issue on an old model). My iTunes library is stored on an external harddrive, so there should be no data loss. I haven't sync'd my iPod since this has happened.
I am planning on getting a PC/MAC in the near future, to replace the above PC, however in the meantime I am using another laptop (Windows 7) - it's not mine & I'm hoping to get my own hardware in the next month or two.
I've also just purchased an iPhone & activated it using the laptop. (Laptop owner does not have any iPod/iPhone at present, but will probably be getting an iPhone soon. This iTunes has no music/contents etc.
Can the iPhone & iPod both use the same iTunes library? (I believe they can)
Should I sync my iPod on the laptop? or wait until I get my new hardware and transfer everything across to that PC?
Thanks in advance for any help with this.
Regards,
Vic

+My iTunes library is stored on an external harddrive, so there should be no data loss.+
Do you really mean just the itunes library, or do you mean the itunes library plus the itunes content?
This iLounge article is the best I've seen at explaining how to move to a new PC....the WHY of it all, which isn't in any of the Apple articles.
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive/
+Can the iPhone & iPod both use the same iTunes library? (I believe they can)+
Yes, you can use as many ipods on one PC as you want.
+Should I sync my iPod on the laptop? or wait until I get my new hardware and transfer everything across to that PC?+
Sure, if you've moved everything to the laptop correctly as per the iLounge article, go ahead.

Similar Messages

Need advise on best settings for FCP 7!

I am looking for some advice on the best settings for FCP 7 when I am syncing sound using pluraleyes, exporting into quicktime as one file and then importing that new file into FCP 7 for editing. I have noticed that sometimes my Quicktime files are very large (20 gb) and sometimes they are much smaller (130 MB), but I never changed the settings.
I am working on FCP 7 and shot using my Panasonic GH3 at 24 fps (which comes to 23.98). My frame size is 1920x1080. Compressor is H.264. Data rate: 8.6 MB/sec. Audio rate: 48.0 KHz. I have heard that FCP 7 does not properly deal with H.264. So, I am wondering, what should my settings be? Should I set to "Apple ProRes 422 (HQ) 1920x1080 24p 48 kHz"? Is there anything I need to know when I export to Quicktime 7 Pro in order to not reduce the quality of the video? Should I be changing my video files first before I even start to work on them?
I haven't edited in almost ten years so I am desperate need of some guidance!
Final Cut Pro 7, Mac OS X (10.6.8)

Hi Shane Ross,
Thanks for your help. So, I already synced all of my interviews in FCP 7 (using pluraleyes) before I changed the video to ProRess 422. Can I just go into FCP (in the same project) and compress the video footage, import the new video files and throw it into the timeline? Or will this cause issues? I tried this as a test and it seems to be okay but I just want to check that there aren't any issues that I am not considering.
Also, when I do compress, it seems to take forever (sometimes two hours). Is there any way to make this move along faster?
Thanks so much!

Need advise for best practice when using Toplink with external transaction

Hello;
Our project is trying to switch from Toplink control transaction to using External transaction so we can make database operation and JMS operation within a single transaction.
Some of our team try out the Toplink support for external transaction and come up with the following initial recommendation.
Since we are not familar with using external transaction, I would like member of this forum and experts, to help comment on whether these recommendation are indeed valid or in line with the best practice. And for folks that have done this in their project, what did you do ?
Any help will be most appreciated.
Data Access Objects must be enhanced to support reading from a TOPLink unit of work when using an external transaction controller. Developers must consider what impact a global transaction will have on the methods in their data access objects (DAOs).
The following findSomeObject method is representative of a finder in the current implementation of our DAOs. It is not especially designed to execute in the context of a global transaction, nor read from a unit of work.
public findSomeObject(ILoginUser aUser, Expression queryExpression)
ClientSession clientSession = getClientSession(aUser);
SomeObject obj = null;
try
ReadObjectQuery readObjectQuery = new ReadObjectQuery(SomeObject.class);
readObjectQuery.setSelectionCriteria(queryExpression);
obj = (SomeObject)clientSession.executeQuery(readObjectQuery);
catch (DatabaseException dbe)
// throw an appropriate exception
finally
clientSession.release();
if (obj == null)
// throw an appropriate exception
return obj;
However, after making the following changes (in blue) the findSomeObject method will now read from a unit of work while executing in the context of a global transaction.
public findSomeObject(ILoginUser aUser, Expression queryExpression)
Session session = getClientSession(aUser);
SomeObject obj = null;
try
ReadObjectQuery readObjectQuery = new ReadObjectQuery(SomeObject.class);
readObjectQuery.setSelectionCriteria(queryExpression);
if (TransactionController.getInstance().useExternalTransactionControl())
     session = session.getActiveUnitOfWork();
     readObjectQuery.conformResultsInUnitOfWork(); }
obj = (SomeObject)session.executeQuery(readObjectQuery);
catch (DatabaseException dbe)
// throw an appropriate exception
finally
if (TransactionController.getInstance().notUseExternalTransactionControl())
     session.release();
if (obj == null)
// throw an appropriate exception
return obj;
When getting the TOPLink client session and reading from the unit of work in the context of a global transaction, new objects need to be cached.
public getUnitOfWork(ILoginUser aUser)
throws DataAccessException
     ClientSession clientSession = getClientSession(aUser);
     UnitOfWork uow = null;
     if (TransactionController.getInstance().useExternalTransactionControl())
          uow = clientSession.getActiveUnitOfWork();
          uow.setShouldNewObjectsBeCached(true);     }
     else
          uow = clientSession.acquireUnitOfWork();
     return uow;
}

As it generally is with this sort of question there is no exact answer.
The only required update when working with an External Transaction is that getActiveUnitOfWork() is called instead of acquireUnitOfWork() other than that the semantics of the calls and when you use a UnitOfWork is still dependant on the requirements of your application. For instance I noticed that originally the findSomeObject method did not perform a transactional read (no UnitOfWork). Has the requirements for this method changed? If they have not then there is still no need to perform a transactional read, and the method would not need to change.
As for the requirement that new object be cached this is only required if you are not conforming the transactional queries and adds a slight performance boost for find by primary key queries. In order to use this however, objects must be assigned primary keys by the application before they are registered in the UnitOfWork.
--Gordon

TV on my Mac (UK), what do I need, what are best options?

I want to watch live TV on my PowerMac G5. What do I need? How can I do this? What is the best stuff to get to enable me to do this?
How reliable are these things, is the quality good, do such devices cause any problems to other operations?
Thanks. All help is appreciated.

hi
i have used elgato 410 without any problems for years one on ebay now or take a look at elgato for the new stuff
i get better tv on my g5 than the tv in the living room.
http://cgi.ebay.co.uk/EyeTV-410-digital-TV-tuner-for-Apple-Mac-FreeviewW0QQitemZ120458363445QQcmdZViewItemQQptZUK_Computing_Apple_Mac_Accessories?hash= item1c0be0c235&trksid=p3286.c0.m14

Help regarding best option to meet new requirement

Hi guys
I need your help to find the best solution for my requirement.
I need to transfer the value of two Items to a third one without changing the source.
For example I have:
Item 1: 200u20AC
Item 2: 300u20AC
I have to transfer the 500u20AC to Item 3, but I want the values to remain unchanged in Account 1 and 2.
Iu2019m almost being able to do this with Reclassification functions, but these functions remove the original values.
Do you know how can I do this?
Best regards

Hi,
Use One-Sided Reclassification:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/91/4b721354f68b45987210d89e9d30b3/frameset.htm

Best option for backing up iPad via iTunes .?

I need to know best option of backing up iPad via iTunes .
I am given an option there , but dont know the best one to use.
Thank you.

I've always done mine the other way and three years later, no issues.
I'm not worried about the passwords so the encryption wasn't an issue for me.
Encrypted or not, my personal opinion is that backing up via iTunes is a better way to backup than trusting the cloud.
You know, if you're not sure, you can always do it both ways. I've never tried it so i'm not sure if one backup erases the other or if they have different names and can co-exist. That said, every time I've done a backup, I just look in my recycle bin and find the old backup there (iTunes throws it away), so I can go into the recycle bin and move the file elsewhere and preserve it.

HT1661 My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?

My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?
I have ordered a 800 firewire to 800 firewire cable and am hoping to use the target mode option to copy files from the MBP.
Is this possible?
Hope so!
Any advice and or help would be greatly appreciated.
Many thanks,
Neil

Thanks Ogelthorpe.
Just bought an enclosure to try that also.
Hoping the MBP isn't really dead but just feigning death
Fingers crossed.

We need advice on what cloud service is the best option for us

Hello,
I work for a very small company, we have two designer. Both of the designers just go new computers and we are looking at switching to the cloud but are confused about what the best plan is for us. We mainly need the creative suites softwares but we occasionally both work with a few production suite programs as well. Again, it is only the two computers and we do not see a need to add anther computer within the new few years. What is the best option for us?

Team license links that may help
-http://www.adobe.com/creativecloud/buy/business.html
-manage your team account http://forums.adobe.com/thread/1460939?tstart=0

Best Options for a 60" 3D television?

I don't want to go above the $1600 prictag. I've been researching TVs for the past week and I'm just getting overhwelmed with all the different TVs and the reviews. I was set on getting the Vizio M601d-A3R because it had great reviews and the price was great. I went into Best Buy to purchase it because I wanted to price match it with a store that had a lower cost. I instantly knew something was wrong when the employee said they didn't have any in stock and the factory didn't have it either, but he convinced me it was still active. So he sent me to the express lane to have it shipped to the store from another authorized seller. As we were finishing up the process of paying, that employee said she couldn't have shipped to the store or my house. It wasn't in stock anywhere. I asked her if it meant it was being discontinued and she said that it looked that way. I went home and looked it up and couldn't find a definite answer to it, but I did find that Vizio came out with a new line for 2014 and that was the older model, so it was being phased out. I read some reviews for different sizes on other sites where some people complained about the TV crashing, so I decided to not even attempt to buy it.
So now I'm stuck. I found a LG for a very cheap price on Best Buy's website. It has great reviews on Best Buy's site and other places, but there are only a few reviews on each and Best Buy has it listed as a special order item. Here's the link for it: http://www.bestbuy.com/site/lg-60-class-59-7-8-diag--plasma-600hz-smart-3d-hdtv/5935095.p?id=1219174...
I'm a little unsure about it since I can't see it before I buy it. Plus, the low price and "special order" tells me it is possibly being discontinued also. So I'm not really sure.
I was also looking at this Samsung: http://www.bestbuy.com/site/samsung-60-class-60-diag--led-1080p-120hz-smart-3d-hdtv/4327014.p?id=121...
The reviews on Best Buy's site were great, but on other sites they are a little more mixed.
I was also looking at this Sharp:
http://www.bestbuy.com/site/sharp-aquos-q-series-60-class-60-3-32-diag--led-1080p-240hz-smart-3d-hdt...
I really want the 3D feature, otherwise I would just get an HDTV or a Smart TV. I originally wanted passive 3D because I own a 32" Vizio that uses it and it's cheaper to buy the glasses, but at this point I don't mind if it's active 3D.
I'm open to any other suggestions for 3D TVs that you might know of and if they aren't available on Best Buy's site for immediate delivery, that's fine too.
As for the setup, I have a stand with a mount built in already. It holds up to 65" and 135 pounds. I currently have a 46" Zenith on it. I have plenty of room for the 60" and the distance from my TV is at least 10 feet.
Any suggestions for 60" 3D TVs around or under the $1600 price limit would be greatly appreciated. Thank you
Solved!
Go to Solution.

KateMcK0023 wrote:
Unfortunately I can't afford the more expensive model, but it looks really nice. I'm favoring the Samsung I posted in my original message because for the price and the ratings, it seems to be the best fit for me. It comes with two pairs of glasses. The LG doesn't come with any, but with the cheaper price it wouldn;t be too bad to purchase some. However, the very minimal amount of reviews worries me. I do like the Sharp TV, but that is the most expensive of the three and doesn't include glasses either. So I think the Samsung is my best option. I've seen mixed reviews on their customer service, but the products seem to mostly receive positive reviews.
For the calibration disc, would it be easy for a novice to understand? I'm usually pretty good with technology, but I don't want to screw anything up. Is it one of those type of things where I can just put the disc in my Blu-ray player and let it kind of do its own thing? I just don't want to do any damage to the new TV.
I also read online that I should get a surge protector for the TV because of how high powered that, my Blu-ray player, and other systems will be all in one area.
And finally, do you have any suggestions for a good soundbar or any sound system options that are relatively cheap? No more than maybe $150-$200? I also wanted to have Best Buy install the TV for me, but the price of $200 is a little steep. Do you suggest having them install it? Thank you for all your help!
I'd take the ratings on the Best Buy website with a grain of salt. None of those reviews have been done by a professional that has the calibration equipment and the knowledge necesarry to do an in depth analysis of the TV.
David Katzmeier at Cnet does a great job of reviewing TV's and has listings of recommended models.
http://www.cnet.com/topics/tvs/
The Samung you listed is a VERY average LCD TV. I wouldn't recommend it to anyone. I actually don't recommend Samsung LCD TV's to anyone for a few reasons. Until you hit the higher end models, you play what's called "panel lottery", meaning you don't know who actually made the screen. Their customer service has had issues in the past as well.
I checked around and the Vizio TV's are in stock at other retailers, the latest models are getting very good reviews over at Cnet.
However, if you're deteremined to get a 60" TV and Best Buy is the only purchasing option you have, the Sony KDL60W850B is on sale right now for a hair under $1700.00.
http://www.bestbuy.com/site/sony-bravia-60-class-60-diag--led-1080p-120hz-smart-3d-hdtv/3419019.p?id...
If not, Drop down to 51" and get the Samsung 8500 series plasma for about $1800.00.
http://www.bestbuy.com/site/samsung-51-class-50-3-4-diag--plasma-1080p-600hz-smart-3d-hdtv/8490071.p...
If you can skip 3D, the Samung 5300 series plasma is available in 60" for $800.00 and is very highly regarded.
http://www.bestbuy.com/site/samsung-60-class-59-9-10-diag--plasma-1080p-600hz-hdtv/8182045.p?id=1218...
The Disney Calibration disc is very easy to use. It will help you set things like brightness, contrast, color, and tint, along with other settings to their appropriate levels.
You should use a surge protector for ALL your appliances, anything from Belkin is fine, don't get the cheapest surge protector, but there's also no need to buy the most expesive one. Surge protectors do wear out with time, replace them every few years.
I don't have much experience with sound bars, any name brand that has HDMI in/out should be fine and will be better than the speakers in any of the TV's. If you can budget it, get one with a seperate subwoofer.

Best option for wireless Mac Pro early 2009

I didn't but the airport card when I bought my Pro, but find myself needing a wireless connection.
What is the best option?
I see many USB adapters cheap, but have heard that reliability has been an issue with many of them.
I've heard of issues with 10.6.x (and I need 64bit too) with some PCI adapters.
Should I try to find one of the airport express cards that shipped with it as a BTO option? I have the skill to dismantle the computer to install it myself.
I'd like to go the cheapest route, but don't want to chase down drive or other issues repeatedly; I've gone through that mess with "bargain" routers before.
I'd need it to work with boot camp too.
Any advise would be greatly appreciated.

Obviously you can find your way around inside one of these things, so yeah -- you're probably better off just shopping for the best deal online.
I think you have to be careful about the connection wires -- they're referred to here, in step 5
http://guides.macrumors.com/Adding_Bluetooth_and_Wireless_to_a_Mac_Pro
Luck and long life.

HT4623 my phone is giveing me error 21 since i updated it to ios7 it wont turn on it wont restore i have tried several times to restore the device but im really at a loss what is the best option for me ?

hi, my iphone 5 has refused to restore after i updated it to ios7 ...... it will not turn on, it will not restore i do get an error 21 mesg and i have attempted a couple of fixes from the net, but nothing seems to work . i have no acces to my phone it just is dead whats my best option, do i need to send it to apple ?

Hello Peter,
Thank you for using Apple Support Communities!
Error 21 is part of a range of error codes generally indicating that other software is interfering with the restore process.
Check out the troubleshooting from this article named:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694#error21
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
All the very best,
Sterling

URGENTLY need help regarding to recording

Hello all,
I have a problem regarding to using the microphone on my ZEN NEEON GB.
I use it to record my uni'versity lectures and now i'm missing almost all the lectures.
The problem is that, when I start recording it shows the timer and everything seems working fine, I press the pause and hopefully it's finished but when i connect it to my PC nothing is recorded although a big file has been created sometimes about 20MB.
I couldn't find any step-by-step recording procedure on the manual.
I do appreciate your kind advise regarding this issue, as i'm missing my lectures.
regards,

I think you may be in for a bit of hard work and possible complications if you have no idea on how to set up a server. It would be more realistic, especially for security purposes for an IT person who is knowledgeable in servers to set it up for the university - seriously!
Anyways, I suppose it all depends on the type of server, is it a windows based server or will it be linux??
I did a google search for 'configuring a server' and came up with these links:
http://www.google.com.au/search?q=configuring+a+server&ie=utf-8&oe=utf-8&aq=t&rls=org.mozi lla:en-GB:official&client=firefox-a
As you can see, lots of information, but it depends on the type of server.
Once the server is set up, you would have information on how to upload the site to the server (same as any webhost) and you use those details to enter into the Remote site window.
I'm afraid I'm not familar with setting up servers, so that's the best help I can offer :-)
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

Help Determining Best Option for a MacBook Pro

I will be purchasing a new MBP, and I am having some challenges determining my best option. I have researched quite a bit, but the more I research the more I get lost. I was hoping that the support community here would be able to assist in my decision. I am very price consious so I am looking at the refurbished models from the Apple store. I am also a Web Developer so I need to be able to run Photoshop, Dreamweaver, Illustator plus have a few browsers going with multiple tabs in each. Speed (both working with files and browsing the web) is of the utmost importance to me as I need a computer that can keep up with me. Basically I need a fast computer so I can get my job done quickly. I would love to purchase a new Mac and max it out, but cost is a very important issue which is why I am looking at these two models.
I am torn between two models in the Apple Refurbished section:
Option 1.
Refurbished 13.3-inch MacBook Pro 2.5GHz Dual-core Intel i5
Originally released June 2012
13.3-inch (diagonal) LED-backlit glossy widescreen display, 1280-by-800 resolution
4GB (2 x 2GB) of 1600MHz DDR3 SDRAM
500GB Serial ATA @ 5400 rpm
8x double-layer SuperDrive (DVD±R DL/DVD±RW/CD-RW)
Intel HD Graphics 4000
with this model I would max out the RAM to 16GB and switch the HD to an 128GB SSD that I have.
Option 2.
Refurbished 13.3-inch MacBook Pro 2.6GHz Dual-core Intel Core i5 with Retina Display
Originally released February 2013
13.3-inch (diagonal) Retina display; 2560-by-1600 resolution at 227 pixels per inch 
8GB of 1600MHz DDR3L SDRAM
 256GB Flash Storage
 720p FaceTime HD Camera
 Intel HD Graphics 4000
What it comes down to is that I like option 1 as the cost is much lower and I can upgrade, but I am nwondering if option 2 would be a faster than option 1 even after I upgrade the RAM and HD. I'm just hesitant about the retina model as I cannot upgrade. To me most of the numbers look the same, but I do not know much about what is under the hood and what is overall a better machine for my purposes above. To the retina screen isn't all that important as I plan on connecting the MBP to a larger external monitory.
Thanks in advance for any help. If anything needs clarification please ask and I will provide more details.

Another advantage to the non-Retina MB/Pro with optical drive is the possibility
of upgrade with a kit, to install a second SSD in place of that drive; as per a
part number kit that macsales OWC site has listed. That kind of upgrade does
come up on occasion; however an SSD in that location has a slower data rate
than one on the hard disk drive bus. 'Data Doubler' is their name for it; a kit
could include a suitable SSD, too. http://eshop.macsales.com/shop/SSD/OWC/
About wireless connectivity differences between Retina MB/Pro and non-Retina,
could vary the results if one were to use a newer Time Capsule wireless base
station; as these can use two bandwidths of wi-fi. However I am not sure if one
or both models can utilize this feature when connecting to the base station &
wireless backup function of the time capsule. The faster speed could be a little
helpful if using wireless; yet I'd be sure to make a backup clone and directly
use a wired connection of dependable speed and quality for its use.
So to read up on the newer specs for the Time Capsule with built in wi-fi base
station to see if that matters; I doubt there would be an issue as the newer is
supposed to be compatible with the older.
Hopefully this helps somewhat. I've found an older AirPort base station can
affect the internet speed when the source is higher than the base thoroughput.
This can be an issue, at least with wireless backups or internet access. For
best connection speeds, it also helps to have a wired network, to fall back on.
Ethernet is faster and more reliable as a local & internet network path; and a
wired network is more secure than a wireless one.
If you have a different question, be sure to ask; you could also start a new thread.
Good luck & happy computing!

Best Option to learn Java: Search the Web, Books or Real Training

Good Evening People,
I came to the following conclusion during my 4 weaks of trying to just connect and read a MySql Database, to read a CVS file.
It seems that you get some leads, but never the full answer.
So I am asking what will be my best Option, as I can see people on the Forum sort of give you some direction, but they want you do figure the answer out for yourself. Which I suppose you deserve as you might have started off with the same frustrations.
So what fo you suggest I do to limit my frustration:
Web Search drive me to a level of uncontrollable frustration, is this realle a complete solution.?
I bought books each costing me over R600.00, still the mistery remains on how to do simple functions.?
Should I rather spend some money and do a Course ?
Please if you have walk the road and have the correct answer I will appreciate it.
If it is a course, what will it be ??
I am in the Gauteng Area.
Regards
Judy

jverd wrote:
I don't know what books you've bought and in what way they're not meeting your needs. Here's my standard list of web resources and books. At least one of the books is available online, free I think. Take a look at them and see which ones best fit your needs.
However, if you expect to just be able to cherry pick bits of Java to learn as you go, without first spending time and effort working through the basics, you're in for a disappointment.
Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806].
with the javaalmanac.com site does it cover everything in the book or is there a lot more in the book to make it worth buying? thanks

What is the best option for tethering my IPhone 4s with my iPad? (the iPad is wifi only)

What is the best option for tethering my IPhone 4s with my iPad? (the iPad is wifi only)

#1. Understand that if you switch carriers, you can NOT take your existing iPhone with you. It won't work. You will need to purchase a new one.
#2. Your only choices are Sprint and Verizon. Decide who has the better coverage in your area. Keep in mind that you will NOT be able to get simultaneous voice and 3G data on either of these, as their CDMA networks do not support it. The U.S. T-Mobile network is not supported and is not fully compatible with the iPhone as it operates on a rarely used frequency compared to the rest of the world.
#3. What in the world are "niners"? Do you mean you want to be able to keep your existing "phone numbers"? If so, that should be no problem. Most numbers in the US are now portable.
#4. Consider WHY you want to switch. If the issue is really price, you're not going to see much of a difference. A few dollars a month at best for comparable voice and data plans.

PC issues - need advise regarding best option...

Similar Messages

Maybe you are looking for