Pc & Laptop: How to share the internet connection via Bluetooth?

Hi,
I've recently bought a laptop and i'm having trouble figuring out how to share the internet via bluetooth from my desktop pc. I can connect using the Personal Area Network (PAN) but i'm not sure how to send the internet. whatever i've been told to try so far as all failed.
i'm sure this questions been asked quite alot, so i'm sorry to ask again)
could someone tell me a step by step setup?
(Thanks, It's much appreciated)

Hi
Its takes longer to describe the full installation how to use the BT for internet sharing.
I have found this website with a installation instruction for Windows 2000.
The dialogs for Windows XP might be a little different, but the configuration will be the same.
http://www.geekzone.co.nz/content.asp?contentid=1285
However, check it. Its useful.

Similar Messages

  • How to share my internet connection on my macbook with my iPhone ?

    Hi guys, Do you know how to share my internet connection on my macbook with my iPhone. I have already made my own network, and I allowed sharing Internet , but it didn't work. Can you help me , please?

    If your carrier provides the service, go to Settings > General > Network > Personal Hotspot.  If you don't see the Personal Hotspot option, then your carrier does not support it.
    Note that you'll have to pay for a 'tethering' data plan on top of your normal iPhone data plan.

  • How to switch off the internet connection via GPRS by iphone 3G

    how to switch off the internet connection via GPRS by iphone 3G?
    need help.
    thanks

    Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

  • How to used the internet connection adsl on my com...

    how to used the internet connection adsl on my computer by nokia n73 me
    i whant used the adsl connection in nokia n73 me by Bluetooth or cable
    and thank you

    Hi Theo,
    There are several ways to implement this using simple timing features of LabVIEW.  Two fairly simple methods are comparing system time stamps or using the Wait VI provided in the Timing palette.  The time stamp comparison requires a little bit more programming, but can be included in your main program loop.  To use the Wait function, you will probably need to construct a new loop parallel to your main loop.  I have attached screenshots of these two implementations.  Please let me know if you have any more questions.
    Donovan
    Attachments:
    WaitDelay[1].Png ‏5 KB
    TimeStampFalse.Png ‏11 KB
    TimeStampTrue.Png ‏11 KB

  • My iMac keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

    Running 10.6.8 on Intel dual core iMac, it keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Can I share my internet connection via wifi AND use my wireless printer at the same time?

    Not completely familiar with  wifi capabilities. I have this new setup in my office. I want to share my iMac internet connection via wifi so I can text and check emails using my iPhone (no cell service inside the building). Which works fine. However, I now cannot print wirelessly to my HP printer (LaserJet Pro 400 color). Once Internet sharing is off, I can print just fine. Any other wireless options, or just go get a long USB cable?

    Hi,
    It is not a multitasking printer, other devices may keep it therefore the best option in this case: connect it to your wireless router and all devices which are conntected to this router can sahre the printer.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to Share Mac Desktop Internet Connection Via Bluetooth

    I have Mac Desktop with a Internet Connection... I have also shared my Internet Connection through Bluetooth.. but How can I use that on my Curve 8520 via bluetooth.... please guide.....

    How to configure Bluetooth file transfer between a BlackBerry Smartphone and a Mac
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to keep the internet connection alive?

    Hi, I am a new Macbook user and everytime my computer goes to screen saver or sleep mode it keeps losing the internet connection. Is this normal? Is anyway to keep the internet alive even is the computer goes to "sleep mode"?
    I mean, it is quite a pain to keep signing in at messenger everytime I wake up my computer or come back from screen saver
    Thank you

    I do not know of a way. When your computer goes into sleep mode, it basically shuts itself down and stores everything in memory. Nothing is moving or working because the whole point of sleep mode is to conserve the battery. If it is really bothering you, go into System Preferences and change the amount of time it takes for the computer to go to sleep.

  • How to fix the internet connection on itunes

    Everytime I run the diagnostics it tells me that the internet connection test and the secure link to itunes store test has failed. And when I try to go to the itunes help it says I need internet connection to do so. My internet connection is fine though. Any ideas on hwo to fix this? I even tried uninstalling and reinstalling itunes.

    PROBLEM SOLVED.
    Another web site tipped me off. Here is their fix:
    We figured out a way to get around this latest set of errors, for Vista users.
    Go to itunes. By default, it installs to c:\program files\itunes. (the shortcut link will not work).
    Right click on the file, and go to properties.
    Click on the compatiblity tab.
    Click on the checkbox for run this program in compatiblity mode for:. By default it will go to Windows XP (Service Pack 2). That is fine.
    Click ok, and then run Itunes. That allowed us to access the Itunes store.
    SOURCE: http://www.geekstogo.com/forum/iTunes-could-not-connect-to-iTunes-Store-t144947. html&st=15

  • Can Airport Express share an Internet connection via Thunderbolt Ethernet

    An increasing number of hotels are now charging for every device that you use to connect to the Internet. I am travelling to India next week for work and the hotel I am staying at has this policy. I have not discovered a way of sharing a Wifi account between several devices. I travel with an iPhone, iPad and MacBook Air.
    What if I connect my MacBook Air via wireless. Can I share my Internet connection (Internet Sharing in Sharing) by connecting an Airport Express to the ethernet port (thuderbolt ethernet) and create a wireless network that way? If possible, what configuration would I need on the AEX, wold it be bridge mode?

    This is why I travel with 2 AirPort Express devices.
    For hotels with wireless only....one Express is configured to "join" the hotel wireless network and it provides an Ethernet signal to the second Express which is configured to "create" a wireless network for multiple devices.
    The hotel network only "sees" one device....the AirPort Express that is joining....so I'm only charged for one device, but can connect multiple devices if I want.
    If the hotel has an Ethernet jack, you only need one Express..the one configured to 'create" a wireless network. Again, the hotel only "sees" one device....because I do not use Bridge Mode.....but I can connect as many wireless devices as I want.
    Both methods work about 95% of the time at "unknown" hotels. Generally, I stay at "known" hotels where I know that things will work.

  • How to share broadband internet connection on Satellite A200-1VG

    Hi,
    I am very new to the world of laptops, 3 days old. In fact, I have a desktop (the OS is XP professional) and have just bought my self a Satellite A200-1VG (the OS is Vista).
    I believe it is possible for 2 machines to share a broadband connection, but how I do not know. I must confess to being quite ignorant when it comes to technology ( you have probably gathered that by now) and I ask that any advice given will be given in not too technological language.
    Thanks in advance from a newbie.
    MegP

    Okay, firstly some routers or mdoems come with 2 ports on the back so you can connect two different computers so simply plug them both in
    if not, then i advise you buy a router which allows you to add numerous computers to the same network via wires or add numerous computers wirelessly
    i have one computer connect to my netgear router -wired
    i have one computer wirelessly connected with a Netgear USB wireless reciever
    then i got my laptop which is connected via wireless
    i have xbox live which i connect to the internet via my laptops wireless connection, this can be done with any pc or laptop aswell
    what you do is
    wireless networks - where it showws any detected networks
    change advanced options - on the side
    advanced tab
    then allow other computers to use this computers internet connection
    simple as
    all you do is plug in your other pc or whatever

  • How to change ringtone when connected via bluetooth

    When the Z3C is paired via bluetooth with my car audio system, the Z3C playes a different ringtone then the one which I have set as default.
    How can I change (set) the ringtone when the Z3C is connected in my car?

    I'm not to sure but I would imagine it has something to do with Smart connect and how it's setup when paired
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • How to share songs and files via bluetooth?

    How do i share songs and files from my iphone to another file via bluetooth? The devices dont even detect one another. please hepl me at the earliest.

    You can't

  • After upgrade to ios7 podcast shows wrong information on display in the car connected via bluetooth

    Hello everybody,
    After upgrade to ios7 I see very strange podcast behavior when iPhone is connected to the car stereo system via the Bluetooth.
    When I play the first track it shows correct information about this track. When the first track is finished and I move to another track it still keep showing previous information about previous track.
    I will appreciate your advise.

    Assuming you are able to select and play podcasts from your car controls be thankful!  Many of us can no longer control the playback of podcasts from the car controls now that Apple has ripped podcast support from the Musica app!
    I have seen that behavior in the past with Music under iOS6 though.  Not sure what caused it.  A reboot of the phone and off/on cycle on the radio would seem to clear it up when it would happen to me.

  • My 2010 MacBook A1342 will not connect via Bluetooth to my iPhone 5S

    I am able to connect my 2010 MacBook Pro to my iPhone 5s in order to use the Internet connection via Bluetooth. However I just purchased my son a 2010 white MacBook A1342 via Bluetooth to my iPhone 5s in order to use the Internet, I received a message on my phone that says "MacBook not supported".
    I am able to pair other Bluetooth devices to this same MacBook and I know that I can connect via Wi-Fi but I would like to know why this is not working.
    Thanks!

    And I am also trying to connect it to my iPhone 5s via Bluetooth***
    excuse the typo.

Maybe you are looking for

  • How to retrieve images from the file system in Portal Forms?

    Portal 3.0.9.8.0 In a Portal form , there is a field named ID wherein a value is entered. Say the value entered is 5 , how can we get the image named 5.jpg from C:/images/ folder and get it displayed in the form ? The images are not stored in the dat

  • HELP... How can i implement this into my code

    Hello :) I'm writing a simple game here is the code now all it does right now is it writes out the values of the cards on the screen in an applet however I want it to display card images from http://www.waste.org/~oxymoron/cards i can't get it to use

  • I get an error code when I try to install the latest update for Photoshop Camera Raw.

    Photoshop Camera Raw 6.3 Update Installation failed. Error Code: U44M2P7 (I'm using Photoshop CS5 on a Mac Mini)

  • 2012 MBA won't output to DVI TV

    I have a 2012 MBA that I'm trying to connect to an old LCD TV via a mini display port to HDMI cable that's then attached to an HDMI to DVI adaptor. The TV cannot find a signal from the MBA and doesn't appear in the MBA's display preferences. The odd

  • Add a special field called gsber

    Hello AL, I want to add one special field called gsber in to vendor line item display report, i'm using standard report define additional fields for line item display(SPRO). but its not allowing me to do so, pls let me knw what can be the reason Than