PC limited connectivity with airport extreme

We still have a PC in the house.
We just added the new AirPort Extreme.
All of the Apple devices and the Zeppelin connected no trouble and have full internet acces.
But for some reason I can't figure out the PC will only connect to the network but gets limited connectivity to the internet.
How do I fix this please?
Thanks

You already know that the AirPort Extreme is operating correctly.
So, something on the PC is blocking the connection attempt to the Internet. That might be the Windows Firewall, the anti-virus program, or Microsoft Security Essentials....if you have it installed on your PC.
Work your way through the guide for troubleshooting Windows connection issues to see if you can find the cause of the block on your PC.
http://windows.microsoft.com/en-us/windows-vista/troubleshoot-network-connection -problems

Similar Messages

Lost wifi connection with Airport Extreme.

Lost wifi connection with Airport Extreme. When I connect my modem directly to the computer I can access the internet, however as of this morning I am no longer able to access the internet via wifi on my airport extreme. I have been using airport extreme for 6 months or more and everything has been working fine.
When I diconnect my airport extreme and reconnect it I get wifi for 1-2 minutes working fine, but then i lose internet connection. According to airport Utility everything is setup and connected and working ok, but I still am not able to access any webpages over wifi.

I have the same issue, I'm getting droppeds from wireless constantly

Apple TV often drops connection with AirPort Extreme and Express stations

Here's my setup:
- Mac Pro in basement office connected to AirPort Extreme (802.11n) station via Ethernet
- AirPort Extreme station running WPA/WPA2 security and 802.11n (b/g compatible)
- AirPort Express station across basement room connected to stereo expressly for AirTunes purposes
- Apple TV and MacBook Pro on house ground floor, both connecting to the network via WiFi
(unless specified, the software and firmware in my devices is all extremely up to date. I write about Apple news for a living so I know when the updates land and install all of them almost immediately)
Here's what's going wrong:
Since I have one of the first gen Apple TVs with a 40GB hard drive but a 100GB iTunes library, I use streaming almost 100% of the time. The Apple TV can usually connect to my iTunes library for streaming via WiFi, but if the AirPort Express (a b/g device, mind you) is active on the network, the Apple TV and even my MacBook Pro get booted off the network usually between 12-24 hours, if not 48. Sometimes WiFi seems to work itself out and I can get the MacBook Pro back online, sometimes it even needs a full restart, as Mac OS X will start giving me nothing but "there was an error trying to join this network" warnings. Just as frustrating though, the Apple TV getting booted off means I need go through the whole tedious process of connecting it to WiFi again (it doesn't remember the password for some stupid reason), and then manually surfing again through the Sources list just to get back to streaming my media.
What the heck is going on? Is it the kind of security I'm running? Should I try WEP or... none at all? I would try "downgrading" the Extreme station's network type to only b/g (excluding n entirely), but I don't see that option in the radio settings anymore; it's all just flavors 802.11n now. When I set up the AirPort Express to connect to the network just for AirTunes streaming to the stereo, I used the setup wizard that the AirPort Utility provides. Should I attach it a different way? Perhaps manually set it to "participate in a WDS network" or "extend a wireless network?"
Any thoughts or similar experiences are very, very appreciated. My wife and I love this setup, but its unreliability is really getting on my nerves. Thanks in advance.
Message was edited by: bedoughty

Firstly, the easiest bit (although I don't believe you need to do this):
I would try "downgrading" the Extreme station's network type to only b/g (excluding n entirely), but I don't see that option in the radio settings anymore
You will get additional settings if you hold down the option key while browsing the radio settings drop down menu.
Moving on: Unfortunately a dropped connections seems to be a problem with umpteen causes and not only is it difficult to troubleshoot with someone in a forum it can also be made even more difficult because many problems are associated with network settings on a router that the person who is trying to help is unfamiliar with.
However you seem to be convinced your problems arise when your express is running which may narrow things down a little if correct, if not it may actually lead us away from the answer to your issue.
Is it the kind of security I'm running? Should I try WEP or... none at all?
I use WPA and have no problems (password = 8 Characters)
Should I attach it a different way? Perhaps manually set it to "participate in a WDS network" or "extend a wireless network?
I have my expresses set to participate in a WDS network, but that's because I use them for other things other than itunes, I would have thought 'join a network' would be fine.
You could check that all your devices are using independent IP addresses and all are using the same subnet. You could also check that no two devices have the same mac address, I've been told a million times this can't happen, but I've seen it. You may be wise to check these things before and after your devices have been 'kicked off the network", you may even want to write them down to see if any are changing.

Slow connection with Airport Extreme

Just upgraded my cable modem connection to the very high speed. 6 Mbits download, and 786 Kilobyts upload. 2 Macs connected via Airport Extreme to the cable modem. I am getting the upload speeds, but the download speeds are 2322.04, and 270.744, as an example. Troubleshooting it with the ISP (Adelphia) they say the problem is in the router. Because on a direct connection, bypassing the router I get download speeds of 5147.015, and 4129.464 as an example. They told me to update the router's software which I did to Version 5.7. That did not resolve the speed problems. I am still not doing any better on the speeds. Since the problem seems to be the Airport Extreme router, does anyone have any ideas? Thanks.

and it worked fine up until a few weeks ago
That would be the time that someone near you likely set up another wireless network that is interfering with your network. If it is any consolation, your network is likely interfering with his as well.
Unfortunately, the bottom line here is that other than experimenting, there is just not much that you can do. A good friend of mine recently moved into a new downtown condominium complex and found that his wireless was virtually unusable due to the number of other networks around him.
The only solution that worked for him was to take an older AirPort Extreme that was capable of 2.4 GHz and 5 GHz, but not both at once like the newer models, and set up the older AirPort Extreme for 5 GHz only.
ironically, the better antennas in the newer AirPorts provide better wireless coverage, but they are also more susceptible to picking up other signals that may interfere with your network. My opinion on that, based on my experience here with one of the new AirPort Extremes.
I went back to my old AirPort Extreme and while I have a bit less range, things work better.
This is the newest model, do you think the ac vs n connection would have anything to with it?
Most interference issues occur in the 2.4 GHz range, so it is very unlikely that an "ac" connection....which runs at 5 GHz....would be the cause of your issue, since there are very few 5 GHz networks....for now.

HP Laserjet 1022 not connect with AirPort Extreme

Previously I connected to my airport extreme with ethernet from my Apple Laserwriter Pro 630. I bought a HP Laserjet 1022 and it connects through the USB port. It does not print. I have installed the HP Laserjet through my Printer Set Up Utility with my MacOS X 10.4.9 system.
What am i doing wrong?

I've no personal experience with your particular printer but these pages may help you
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?&lang=en&cc=uk&prodTyp eId=18972&prodSeriesId=45674&submit.y=7&submit.x=4&lang=en&cc=uk
http://www.ifelix.co.uk/tech/1013.html
Steve

Loosing connections with airport extreme

I installed a new Airport Extreme at my house. (w ehave Tme Warner cable internet service - to high speed 50Mbps version). After I set it up everythign worked fine for a short while, but withing about 30 minutes Skype on an current iMac connected via Ethernet cable would drop and reconnect to the point that it became unusable. A Mac Book Pro on wifi initially had trouble establishin Internet connections (as apposed to wifi connections) but once it could they also degraded in stablity over a periond fo a few hours. I reset the cable modem, the Airport unit and rebooted our Mac's. The issue persisted. I switched back to my older Airport (about 3 years old) and everything worked fine. We are using a current iMac desktop and an 18 month old 17in Mac Book Pro. Both running Mountain Lion with current patches.
Any suggestion as to why the Airport Extreme would not be able to provide stable network connections and have degrading service over time ( several hours).

There may be something else you can try...
I had similar issues with my WET610N droppoing connections. I monitored the Event Viewer on my PC and saw that at approximately 1 hour intervals the adapter would show as disconnected. When I watched the WET610N it had dropped it's wireless connection. Sometime the disconnections were only minutes apart and although the WET610N always rebuilt the connection it's obviously a problem for streaming / downloading.
I didn't want to drop from WPA2 to WEP, so I changed my Beacon setting on my D-Link router from 100 to 50. I've now had a connection running for 4 days solid without a single drop.
Worth a try for anyone still having issues...

Latest 7.6.1 firmware broke all Airport Express connections with Airport Extreme

Installed the latest Airport Utility (6.0) last night. Once installed I ran Airport Utility and saw my 4 Airport Express N's, one Time Capsule, and Airport Extreme needed a firmware update to version 7.6.1. Installed to all of them, and initially everything came back up-and-running. All this equipment remains on 24-hours a day, and the four Airport Express are wirelessly joined to the Airport Extreme's wireless network.
This morning the wireless link between the Airport Extreme and all four Airport Express's was broken (flashing amber light on all of them). Power resets did nothing. The Time Capsule link was still good; however, the Time Capsule is connected to the Airport Extreme via ethernet. Visited this forum and saw other folks were having similar problems.
I saw no way of downgrading the Airport Extreme firmware with Airport Utility 6.0, so I downloaded Airport Utility 5.6. I launched it, and was able to downgrade the Airport Extreme firmware back to version 7.6. After hard resetting the four Airport Express units, I was able to downgrade their firmware also back to 7.6. Everything immediately came back online.
Am going to sit this firmware update out until more shelf life exists with it. I also agree the Airport Utility 6.0 seem to be a less capable step backward. Why someone thought we need a simpler interface for a "Utility" that resides in the "Utility Folder" is mystifying.

First I've updated my Extreme to 7.6.1, then, the Express.
Everything work fine untill I update the Airport Utility to the new version and rebooted my extreme, then my Express stop working (An can't be detected anymore by the Airport Utility, orange light)
So I took my laptop, plug a network cable between it and my Express (Now I was seeing it in the Airport Utility) and reconfire the wireless network connection between them.
Hope this Help!
Fred

Retina MacBook Pro is not connecting with Airport Extreme 5 GHz signal

I believe I have done my due diligence to find the answer to my question here and other places but I must be missing it. I have a Retina MacBook Pro that as far as I know should select the 5 GHz signal from my Airport Extreme (Generation 1 with 7.6.4 firmware) which is literally 3 ft. from my computer. When I click on the Airport icon in the menu bar, it is indicating a 2.4 GHz connection. I have looked at discussions which say I can give separate names to to both the 2.4 GHz and 5 GHz signals. I can't seem to find that. I also read where you can reorder the order of signal preference. I can't seem to find that either. Interestingly, I have an Airport Express that is extending the network. When option clicking on its icon in airport utility, I can see both the 2.4 and 5 GHz information. I don't se that in the Airport Extreme. I am thinking about gettng the newest Airport Extreme but if I don't need to...
Thanks for any help!

as far as I know should select the 5 GHz signal from my Airport Extreme (Generation 1 with 7.6.4 firmware) which is literally 3 ft. from my computer
A Generation 1 AirPort Extreme is not a simultaneous dual band wireless router. It can produce either a 2.4 GHz....or....a 5 GHz wireless network signal, but not both simultaneously.
If you want the Gen 1 Extreme to produce and deliver a 5 GHz wireless network, it can do so, but any 2.4 GHz devices that you have will not be able to connect to the 5 GHz signal.
A new simultaneous dual band AirPort Extreme will produce both a 2.4 GHz and 5 GHz signal simultaneously. Wireless devices will automatically connect to the best signal quality based on their capabilities and location in relation to the AirPort Extreme.

PC laptop continuously loses connectivity with airport extreme

I use an airport extreme at home and an airport expresses to extend my network. I get perfect connectivity with my macbook pro but with my older Gateway laptop that uses XP, the connection comes and goes making it frustrating to be online with the PC. why is this happening on the PC and not the MacBook and what can I do to correct the problem?
Airport uses version 7.4.2, WPA/WPA2 Personal, 802.11n b/g compatible.
Gateway m505b2, windows XP HE 2002 service pak 3

Recently had a similar problem connecting a friend's PC to my network and thought I would post my fix in order to hopefully help others.
I noticed that everything worked fine when I disabled wireless security, so my problem was a security issue.
I re-enabled security on my router and copied down the first actual HEX key (key 1) instead of just using the password. Then, on the laptop with a Netgear wireless card, instead of selecting to type a password, I opted to use a network key and pasted the actual key, and it worked like a charm.
Maybe it has something to do with aftermarket network cards, but it solved the "network did not assign a network address" problem.
Hope I've helped and not given a useless answer.
Adam

Windows XP system not getting good connection with Airport Extreme

I just moved into a house that already has a Mac system with an apple wireless network. I have a Dell 3.2 GHz system and I just bought a D-Link wireless card 108G with Mimo technology which is supposed to increase the range of the card. The airport extreme router is in the very next room no more than 15 feet away from my PC and I am getting "very poor connection" according to XP. Is there a compatability issue with XP and the Airport router. I have tried everything including getting the latest drivers from the D-link website and I am still getting extremely bad connectivity. I didnt think wireless networking would be this problematic. Let me know if any of you have had issues with this.

I just moved into a house that already has a Mac
system with an apple wireless network. I have a Dell
3.2 GHz system and I just bought a D-Link wireless
card 108G with Mimo technology which is supposed to
increase the range of the card.
This will only be true when using the D-Link Router which uses 108G Mimo technology, otherwise it will only work at 802.11g speeds.
The airport extreme
router is in the very next room no more than 15 feet
away from my PC and I am getting "very poor
connection" according to XP.
What happens if you move either the Airport base station or the XP PC closer?
Is there a
compatability issue with XP and the Airport router.
No
The Airport router is a wifi certified 802.11g wireless router and any wifi certified 802.11b or 802.11g client will be able to connect regardless of who it is made by.
It should be noted that the D-Link device is not wifi certified!
I have tried everything including getting the latest
drivers from the D-link website and I am still
getting extremely bad connectivity.
Can you get any connectivity, any network connection?
iFelix

Connecting with AirPort Extreme 802.11n

Could someone please provide instructions in plain english, no computer jargon or techie stuff, exactly how to connect to the internet with my Airport Extreme? Apple support is no help, I cannot understand the terminology they use and my brand new MacBook doesn't seem to have all the same features that they're telling me are on it, so I don't know what to click.
What a mistake buying this overly complex Apple product! This is my third MacBook, I hope somehow I can get this thing running!

It's a good thing that you didn't try this with a Windows based computer!
I suggest that you call the "Geek squad" or something similar close to your geographical location. There is absolutely no way to explain this to you without using "computer jargon or techie stuff". To configure a computer and a network you must use those terms.

Connection with airport extreme is gone

I have an airport extreme with external harddrive. My own macbook air is connected with the AE so I can put my time capsule back up there and I have my music linked to iTunes. The macbook pro of my girlfriend was connected as well so I put here time capsule back up also on the external harddrive. For some day's now her macbook can not connect anymore.
In finder you can see the AE, however when u open it it says Connection failed. There is some sort of connection with the AE because WiFi connection is established and WiFi is available via AE.
I have no clue where to look or how to fix is. Especially because I have no trouble connecting on my airbook.
Any suggestions??

thnx for the suggestion. That's not my problem.
I do have WiFI connection. So I am already connected tot the AE....the part I do not understand is why I can not connect to the external harddisk that is connected to the AE.
Especially because:
1) It used to be connected
2) My other macbook does connect to the external harddisk

Loosing and slow connection with Airport Extreme

Hi. Before I start, I hope there are some who suffer the same problem as me.
First of all, I have a problem with my MacBook and Airport Extreme. The Network I created with Airport is getting really slow or unconnected with my MacBook. So I tried to reset both the modem and Airport. Actually, it kinda works, however this problem occurs later.
First time I thought it was the problem with uTorrent that I didn't use uTorrent anymore but it still has a problem.
Because of this **** problem, I have to reset my modem and Airport Extreme several times a day and it really stressed me out. Embarrasingly, I don't even know what the problem is. is ti the problem with My macBook? AirPort Extreme? Modem? No idea..
I need a help...
P.S. Modem seems working fine since the ethernet is working fine. maybe problem of Airport or MacBook. I think I should go to the Genius Bar but I am afraid that 'Genius' is going to just check once and say 'It has no problem.'

zdawg77 wrote:
I too am having very slow connection speed issues with two of my white macbooks, both running 10.6.2, same airport extreme wireless adapter (built in). The strange thing is, these two macbooks came in a macbook 5-pack, and the 3 other laptops all have excellent speed. Nothing different has been done with these 2 laptops - all were updated (albeit the 2 were much slower to download the update), with nothing new installed otherwise...
There were some Macbooks that had an issue with the screws holding their internal AirPort cards in place loosening, resulting in noise and lower signal levels from the antennas.
You may want to try taking one of the affected Macbooks to a local Apple Store and see if you experience the same issues on their in-store network.

Cordless phone on separate line kills AOL connection with Airport Extreme

I lose my AOL connection everytime I get a phone call. My cordless phone is a panasonic 2.4Ghz gigarange extreme connected to a separate line. How can I change settings on either Airport Extreme or the cordless phone to fix this?
Thanks,
[email protected]

I'm not sure if it would adequately help your problem, but you might try separating the channels of the AEBS & phone (setting the AEBS on ch. 11 and the phone on ch. 1).
Patrick

Trickling down connection with airport extreme "card"

I recently bought an airport extreme card for my mac pro (older model, 2008?)
Anyways, the problem is that i live in an apartment that offers free wireless. Naturally i suspect the signal to be weak as it has been for a laptop ive used here before. Airport works fine except that when i connect and have a download it starts out high like around 200kb/sec and then slams down to about 12kb/sec then slowly trickles down to a request time out. (I am unable to update because of it.) At first i thought the problem was just well...the apartment, then booted up into Vista and started a download and it keeps a steady pace of about 9kb/sec without timing out.... I tried connecting the 1 and 3 wires, as well as the 2 and 3 and pretty much i noticed no difference. Any suggestions? What firmware is better to use for this?

thnx for the suggestion. That's not my problem.
I do have WiFI connection. So I am already connected tot the AE....the part I do not understand is why I can not connect to the external harddisk that is connected to the AE.
Especially because:
1) It used to be connected
2) My other macbook does connect to the external harddisk

PC limited connectivity with airport extreme

Similar Messages

Maybe you are looking for