PC locks up for 5-10 min when clicking anywhere in Files...

Hello,
I have a client that recently had his User profile in XP Pro copied from a Domain to a Local profile. It appears that perhaps something got corrupted, I have read the instructions on removing the DW cache file and/or the User Configuration File.
Now, when he starts DW version 6, and clicks anywhere in the Files, with any of his sites, DW locks up for 5-10 minutes. We can access those files manually over the network using Explorer just fine.
I should mention that this user has multiple versions of Dreamweaver and CS/Photoshop on his PC.
Two questions:
1- Will doing either of these procedures require the user to have to recreate his Site Files?
2- Are there any other procedures or items I should look at for this issue?
Thank you!
Johnathon

Start with the basics... Are you installing from Software Update or have you downloaded the combo update and manually run it?
I would recommend you download and run the combo, and not use Software Update.
Prior to install, backup everything! Then double check that you have backed up everything! You've been lucky 6 times - don't wait for #7 to be unlucky and render your Mac inoperable before thinking of backup.
Before you run the updater, power down and restart it. Run Disk util and repair permissions. Check the disk to see if there are any issues with it too. If so, repair these prior to updating (post here for more help as disk issues may not be as easy to repair as clicking "repair disk").
Just let it do it's thing. If it hangs for more than 30 mins I'd say restart it (it shouldn't take all that long really - hats off to you for having 12 hrs worth of patience!). If it fails again, come back and let us know we can help you through checking out some logs.

Similar Messages

  • Acouple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since with Apple

    A couple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since,with Apple & Apple store support & many hours of contact with them the problem keeps recurring

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • Is it have some User exits for Vendor master  trigger when click some field

    Dear Experts,
         I would like to know Is it have User exit for Vendor master  trigger when click some field in Vendor master? not just User exit for Prior Save . Please kindly let me know some solution for this case.
         Many thank.

    Hi,
    check may this bapi will be useful your requirements, BAPI_VENDOR_CREATE
    below links may helpful for you:
    BADI http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm http://support.sas.com/rnd/papers/sugi30/SAP.ppt http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm http://members.aol.com/_ht_a/skarkada/sap/ http://www.ct-software.com/reportpool_frame.htm http://www.saphelp.com/SAP_Technical.htm http://www.kabai.com/abaps/q.htm http://www.guidancetech.com/people/holland/sap/abap/ http://www.planetsap.com/download_abap_programs.htm http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm /people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm USER EXIT http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm http://www.sapgenie.com/abap/code/abap26.htm http://www.sap-img.com/abap/what-is-user-exits.htm http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction http://www.easymarketplace.de/userexit.php http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm http://www.sappoint.com/abap/userexit.pdfUser-Exit http://www.sap-img.com/ab038.htm http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm http://www.sap-img.com/abap/what-is-user-exits.htm http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html Rewards if useful......... Minal
    still if you not find any solution go for  custom exit, means in standard program only ABAP consultant change the program where you required, it is little risk, you have to do the more testing for this
    BR:
    Venkat.Gurram

  • Hi,my system is Mac OS X v 10.5 Leopard the problem is that when click on a file, immediately a box appears around the file and the title of the file is read !so how is it possible to escape from the voice?Thank you for your advice

    Hi,when click on a file, immediately a box appears around the file and the title of the file is read !so how is it possible to escape from the voice?Thank you for your advice

    Turn off Voiceover!
    System Preferences/Universal Access

  • What is the procedure for disabling Entourage launching when clicking on an email address in Safari 5.0.5? I use Gmail.

    What is the procedure for disabling Entourage launching when clicking on an email address in Safari 5.0.5? I use Gmail.

    Is this about clicking a link in an external program?
    You can check this pref on the about:config page for external links.
    * browser.link.open_newwindow.override.external (-1)
    If this pref has the default value -1 then browser.link.open_newwindow is used.
    * http://kb.mozillazine.org/browser.link.open_newwindow
    *1: current tab; 2:new window; 3:new tab;
    You can open the <b>about:config</b> page via the location/address bar.
    You can accept the warning and click "I'll be careful" to continue.
    *http://kb.mozillazine.org/about:config

  • Reader v11 will not open in Windows Explorer (or browser) when clicking a PDF file; just a flash on the screen.

    Reader v11 will not open in Windows Explorer (or browser) when clicking a PDF file; just a flash on the screen. I can open Reader from Programs then open the file. I'm using a laptop upgraded to Windows 7

    I do no understand "flash on the screen"; could it be http://support.microsoft.com/kb/2716529 ?

  • Quicktime 7.6 won't open at when clicking on a file.

    I have Windows XP with Quicktime 7.6. My Quicktime has worked on this computer just fine for ages. I just played a .mov file literally less than 2 hours ago. Then, ten minutes after it worked I tried a different movie by double-clicking the file and nothing happened. I tried a different movie, and then I tried the movie that worked originally today - nothing. I have uninstalled and reinstalled - nothing.
    Just to clarify, when I say it does nothing, I mean I double-click the .mov file, I get the hour-glass for a second or two, and that's it. After about 5 minutes I'll finally get a "...encountered a problem and needs to close..." box. If I try to restart my computer during that 5 minutes, I get a "!!QTOCONTROLWINDOW!!" encountered a problem. Click 'End Now'... AAAHHHH!!!
    I have found that if I double-click the Quicktime icon on my desktop, wait for a blank Quicktime window to open and THEN double-click the .mov file, it will open... and likewise if I double-click the Quicktime icon and browse for a .mov file it works, but I don't want to have to do that every time I want to watch a movie.
    Someone please help. Thanks!
    -Chris

    You are using either the built-in Mozilla PDF Viewer or the built-in Chrome PDF VIewer and have a LiveCycle Designer XFA form being viewed.  You need to configure the web browser accordingly.
    XFA-based PDF forms on Mozilla Firefox and Google Chrome
    There are are probably registry entries available for setting this up in the HKEY_CURRENT_USER registry hive for both Mozilla Firefox and Google Chrome, but I don't know them and have not seen them posted on any vendor site.  Then again, I haven't looked either.   

  • When click on a file in a portfolio Acrobat Pro kicks me out?

    K, So I have created portfolios on Acrobate Pro and now when i click on a file in a portfolio i get kicked out of Acrobat.  It automatically closed and asks me to send a message to Apple.  I called Apple and they said it was my Acrobat? Does anyone know what the problem is this is so frustruating I have Acrobat Pro 9

    You have Acrobat 9.what? 9.0, 9.4.3? etc? What OS are you using?

  • Photoshop Elements 11 - I was given this as a gift.  I cannot get it to install.  Nothing comes up to run and when clicking on the file there is no setup

    I've tried installing Photoshop elements 11.  It does not automatically start up.  When clicking on the folder there is no setup.  Help. Am I not doing something?

    Uninstall and download from here:
    Download Photoshop Elements products | 13, 12, 11, 10

  • Fire event when clicking anywhere but on a specific component?

    Hi,
    I'm having some problems with a feature in my project. I wan't to be able to handle the text inside a JTextField when i click anywhere in my JFrame but the JTextField. Consequently, if I click outside of the JTextField I wan't an event to fire. How do I accomplish this as simple as possible?
    Thanks

    Have a look at the java.awt.Toolkit.addAWTEventListener(...) method.
    Piet

  • HT1212 i downloaded the ios 7 and i had never put a passcode for my ipad mini; when the device was updated to ios 7 it is asking me for a passcode. what can i do?

    What do i have to do if my ipad after installing the ios7 do not enter because of asking for a passcode and i've never put a passcode and its a new ipad?

    I had the same problem. After hours and hours of wrong password I placed one that I set up when I bought the iPad, I remembered that password I had to put it even if had disabled the option of asking me a passcode so, I placed that old one and !!!cabum! it continued the settings so, start thinking....

  • HT201320 Hi I have iPad mini and I don't have head phone for my iPad mini when I received my delivery , so please look in to it . Thanks SHAAN

    Hi my name SHAAN Hussain and I got mini iPad , I bought it through my company with monthly installment ,when I received I have got head set in my iPad ,you don't send with the pack,now I found my friends got it , 
    <Personal Information Edited by Host>

    The iPads do NOT include headphones when purchased. They only come with the power cable (Lightning or 30-Pin, depending on model), the power brick and a measly half-sheet manual. Only the iPhones and iPods come with the Earbuds. So you will have to purchase them separately.
    Full iPad Manual (if it came with iOS 7): http://manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf
    Full iPad Manual (if it didn't come with iOS 7): http://manuals.info.apple.com/MANUALS/1000/MA1659/en_US/ipad_ios6_user_guide.pdf

  • Procedure for Integrating Alpha Channel when saving as .dds file

    Hello,
    I'll try to keep this brief but that may be tough...
    One project I use Photoshop CS4 for is painting aircraft used with Microsoft Flight Simulator X (FSX).  Here is some background for folks who aren't familiar with this.
    Each aircraft is downloaded as a "Paint Kit".  The kits look much like the "trees" that plastic aircraft model kit pieces come attached to (see picture below). 
    I paint and add layers onto the kit until the aircraft resembles the design I chose.  The paint kit includes a background,  base parts usually in white, and an assortment of layers adding physical wear, shading, lines and rivets you see on actual aircraft.
    Additionally, the kit includes an RGB Alpha Channel and Specular Maps.  In this application, the Alpha channel provides the reflectivity or gloss on the aircraft paint.  The Specular maps provide a sheen much like the subtle reflections you see from a metal flake paint job when the sun hits it directly.
    Once all painting and manipulation is complete, the kit is "cut" into specific sizes.  Once the kit is cut, each section is saved as a DDS file using NVidia tools.  The resulting DDS files are placed into folders within the main FSX program folder.  The FSX program "assembles" the sections and processes the different layers and channels resulting in aircraft that are incredibly detailed and realistic.
    My problem is I don't know how to properly integrate and preserve the Alpha channel during the "Flatten Image" and when saving the file as a dds file.  As you can see in the "Layers" section in the picture, the Alpha channel is already made.  I just don't know what to do with it to preserve it and ensure the reflectivity it provides is visible in the final product.
    Any help is appreciated - what I need to know isn't what the alpha does, but how to properly integrate it into the final product.  I've searched for this info for the last several days, but I've had no luck in finding specific information on how to do that.  I believe it's one of those procedures that is so simple, everyone knows how to do it.  I guess I'm the only idiot on the planet that doesn't know how... .
    The paint kit can be downloaded at http://library.flight1.net/wp-content/plugins/download-monitor/download.php?id=1467  if you need it to answer my question or if you're just curious about it.
    Thanks for your time and consideration.
    Mark

    I know nothing about Nvidia DDS file format or 3D.  From you screen capture you have no Alpha Channel.  You do have a normal layer named Alpha Channel with its visibility turn off. Why are you flatting ? When I use Save As and use the file type pull-down and select DDS format to save I get the Nvidia DDS save Dialog that I do not know how to use or understand the buttons options or pull-down menu items. The file instruction and its background make no does not seem to match up with the parts.
    I think you have to read the documentation for the Nvidia DDS plug-in. and the normal map plug-in https://developer.nvidia.com/nvidia-texture-tools-adobe-photoshop

  • Help for PowerPoint 2007 crash when running embedded SWF file with latest Flash Player?

    I have developed in Xcelsius 2008 SP4 a dashboard with only Excel as the source. I output to PowerPoint and then save it as a PowerPoint 2003 PPS file. On more than a few machines that have PowerPoint 2007, PowerPoint crashes when I attempt to run the presentation. This happens only with later versions of Flash Player. I have tried uninstalling/reinstalling the latest Flash Player but it still crashes. However, when I revert back to Flash Player 10.1.159..., in PP 2007 the presentation runs perfectly.
    With regard to the error I receive in PowerPoint 2007, it is as follows:
    Error Signature:
    AppName: powerpnt.exe AppVer: 12.0.6500.5000 AppStamp:49a68f9d
    ModName: flash10u.ocx ModVer: 10.3.181.34 ModStamp:4e011a1d
    fDebug: 0 Offset: 003a893c
    Of note is that this behavior does not happen in PowerPoint 2003 nor does it happen when the file is saved as a SWF and launched directly in the browser on the problem machines.
    I have to assume that this has happened to others so any help you could provide would be VERY appreciated.
    Thank you

    Hello,
    on the first glance I see these: data="file:///Macintosh HD/Users/user/Documents/Website/Working.swf", what means the path to your swf file is pointing to your local hard drive which nobody can see except you. Please replace all thes pathes with the correct ones and load up your file(s) again.
    If the problem remains, please send a link to your website in question, no matter how it looks like..
    Hans-Günter

  • TS1424 my recent downloaded songs play for about 1 min then they stop sound file continues to play with no sound

    song plays but the sound stops on recent downloaded songs, i did delete and redownload with no luck

    Try again. If the problem persists contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
    tt2

Maybe you are looking for